VHILED High Lumen 4

VHILED High Lumen 4
Job______________________________________________
Type_____________________________________________
Catalog #
Application
Electrical
• Versatile, fully gasketed housing
• Smooth even illumination with
50,000 hour service life.
• LED boards are individually replaced, if
required.
• High efficient driver and long life led’s
provides total protection against cor-
rosion, windblown dust and rain, splashing and hose-directed water, and damage
from external ice formation.
• Particularly well suited for food and
beverage production, bottling facilities,
processing, cold storage, parking
garages, gymnasiums, manufacturing,
and other areas.
VHILED
SERIES
provide years of quality maintenance free
operation.
listed
• Suitable for damp/wet locations and
certified for ip65, ip66, ip67 applications.
Construction
• Rugged, glass-fiber reinforced
5va
flammability rating.
• Closed cell polyurethane, poured
gasket contains “dry skin” on curing
polyester housing carries
that does not stick to the mating
surface. high gasket compression
recovery provides a solid seal
throughout the life of the fixture.
• Twelve white plastic latches standard.
• Two v-hooks and four mounting straps
standard.
ORDERING GUIDE
Series
lumens
VHILED
100L
139L2
165L2
178L3
200L4
214L4
254L5
310L5
2
kelvin
3K,
35K,
4K,
5K
**Lumen multipliers for
various
CCT’s
CCT
Lumen
Multiplier
3000K
0.938
3500K
0.967
4000K
1.000
5000K
1.041
• NEMA 4X
•1500 psi water spray rated.
• 5 year warranty.
• Minimum 50,000 hours @ L70
• Lumen/wattage tuning available.
(contact factory for options)
• Driver quick disconnect standard where
required by code.
• 80+ cri std. consult factory for 90 cri lumen
package options.
Certain versions DLC qualified. Check
www.designlights.org for list of specific
qualified configurations under the “Qualified
Products List” tab.
LED Industrial
Hose-Down
High Bay
Example: VHILED310L4K48-9SA
fix
48
Lumens:
48”
100L = 10000 rated initial fixture lumens (90 watts)1
139L = 13900 rated initial fixture lumens (151 watts)1
165L = 16500 rated initial fixture lumens (149 watts)1
178L = 17800 rated initial fixture lumens (186 watts)1
200L = 20000 rated initial fixture lumens (180 watts)1
214L = 21400 rated initial fixture lumens (215 watts)1
254L = 25400 rated initial fixture lumens (187 watts)1
310L = 31000 rated initial fixture lumens (232 watts)1
(Contact factory for other lumen/wattage combinations)
Kelvin:
3K = 3,000 kelvin
35K = 3,500 kelvin
4K = 4,000 kelvin
5K= 5,000 kelvin
Voltage:
5 - 347v
9- 120-277
Lens:
FA - frosted acrylic
SA - clear impact resistant acrylic
CP - clear uv stabilized polycarbonate
Options:
TS - lens tether straps (2 per lens)
DM1 - 0-10v dimming to 1%(*dimming to 3% standard)
“not available with 254L and 310L”
DM10 - 0-10v dimming to 10%
“only available with 254L and 310L”
SSL - stainless latches
90 - 90 cri
Accessories:
ZRMB - zinc rigid mounting bracket
(2 required per fixture)
SSRMB - stainless steel rigid mounting bracket
(2 required per fixture)
Motion Sensors:
• MSHD0 – 120/277 line voltage, pir, high bay lens (15’-30’),
0-10v dim to OFF.
• MSHD3 – 120/277 line voltage, pir, high bay lens (15’-30’),
0-10v dim to 30% with no motion, then dim to OFF.
• MSHD3 – NO – 120/277 line voltage, pir, high bay lens (15’30’), 0-10v dim to 30% with no motion, never OFF.
• MSLD0 – 120/277 line voltage, pir, low bay lens (8’-15’),
0-10v dim to OFF.
• MSLD3 – 120/277 line voltage, pir, low bay lenses (8’-15’),
0-10v dim to 30% with no motion, then dim to OFF.
• MSLD3 – NO – 120/277 line voltage, pir, low bay lens (8’15’), 0-10v dim to 30% with no motion, never OFF.
– P – Photocell option on motion sensor (add “-P” suffix
to motion sensor option – only available with MSHD0 and
MSLD0 sensors)
(contact factory for other motion sensor options)
note:
1 = Wattage of configuration with 4000K led boards.
(see chart for lumen multipliers for other cct’s)
(Contact factory for other lumen/wattage options)
2 = Maximum ambient environment of 40C
3 = Maximum ambient environment of 30C
4 = Maximum ambient environment of 25C
5 = Maximum ambient environment of 45C (lumens based
on sa lens option)
LUMAX INDUSTRIES, INC. Chestnut Avenue & Fourth Street
Altoona, PA 16603-0991 814-944-2537 Fax 814-944-6413
www.lumaxlighting.com
VHILED
Series
PHOTOMETRIC DATA
Catalog Number: VHILED310L4K48-9SA
DIMENSIONS
Specifications and dimensional data subject to change
without notice.
52.0
14.6
52.4
52.0
6.0
6.0
14.6
15.0
6.0
LUMAX LIGHTING
VHILED.1016
14.6
15.0
UNLESS OTHERWISE
DRAWN
NAME
-
DATE
xx/xx/xx
The information contained in this document is
the confidential property of Koller Enterprises Inc.
1400 South Old Highway 141
Fenton, MO. 63026
PH (636) 600-4084 FX (636) 600-4108
www.SLPlighting.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising