14. Tools

14. Tools
RECA Open Ended Spanner Set
 Has a U shaped opening that grips two opposite




faces of a bolt or nut.
15° offset angle allows a greater range of
movement in enclosed spaces by flipping the
spanner over.
Manufactured from Chrome Vanadium Steel,
with a matt chrome finish.
Canvas sleeve has hanging holes for storing in
the workshop or van.
10 piece set contains 6 x 7, 8 x 10, 9 x 11,
10 x 13, 12 x 14, 13 x 15, 16X 17, 17 x 19,
18 x 21 & 19 x 22.
Art. No. 0700 600 11
RECA Combination Spanner Set
 Ring spanner one end angled to keep hand away






from work surface.
Open-ended spanner at other end, 15° offset for
improved access in confined areas.
Thin, compact heads allow easy access.
Rounded, smooth shaft and ends spread hand
pressure.
Manufactured from Chrome Vanadium Steel,
with a chrome finish.
Canvas sleeve has hanging holes for storing in
the workshop or van.
10 piece set contains 8, 10, 12, 13, 14, 15, 17,
19, 22 & 24.
Art. No. 0700 111 11
RECA 4-in1 Ring Ratchet Wrench Set
14 01 JDS 02/13 - Reproduction, even in part prohibited. Printed in UK
 A uniquely designed product giving you 8 sizes in a 2 piece set.






Each wrench provides coverage for 4 sizes: 8 + 9mm,
12 +15mmm & 10 + 13mm, 17 + 19mm.
Compact reversible switch allows quick change from
tightening to unfastening fixings.
Smooth 72 teeth ratchet gives 50 movement, ideal in
confined spaces.
Waved socket head design gives more purchase points
when gripping hold of fixings, this will also help cause
less wear on the edge of fixings.
Manufactured from Chrome Vanadium Steel for strength.
3 layers of nickel plating and one layer of chrome provide
excellent corrosion protections for the wrench.
Set comes complete in a canvas wallet.
Art. No. 0700 330 005
14 01
14 01
RECA Varius Spanners
Innovative design gives all the advantages of a
spanner plus a lot more.
 All RECA Varius spanners drive through 72 micro teeth,





giving a ratchet angle of just 5° (normal sockets 10°,
normal ring spanner 30°). Allows tightening/loosening in
very confined spaces.
Slim head design allows access in confined areas where
ratchets & sockets can’t reach.
Hardened steel construction for extreme power exceeding
DIN3110 for standard spanners.
Multi grip ring prevents slip on the bolt or nut.
Adaptor set available to convert spanners into a ratchet
driver for sockets or screwdriver bits.
Available in flat type with quick reverse lever.
Varius spanner quickly
converts to 1/4” hex for
screwdriver bits using Adaptor
Set.
14 02 VY 05/17 - Reproduction, even in part prohibited. Printed in UK
Varius spanner quickly
converts to ratchet wrench
to take 1/4”, 3/8” or 1/2”
square drive sockets using
Adaptor Set.
Art. No.
0700 315 10
0700 315 13
0700 315 17
0700 315 19
0700 305*
0700 325 08¹
0700 399 004
0700 305* comes in Storage Sleeve
*spanners in this set do not have a reversible switch.
Micro drive for confined space
tightening or loosening of heads.
Description
Length
Ring Depth For bolt / nut size Type
Varius Spanner SW10
158mm
7.3mm
M6
Flat
Varius Spanner SW13
178mm
8.6mm
M8
Flat
Varius Spanner SW17
230mm
10.3mm
M10
Flat
Varius Spanner SW19
250mm
11.2mm
M12
Flat
Varius Spanner 6 pc set SW8 -19mm in Storage Sleeve
Flat
Varius Spanner SW8
127mm
6.5mm
M5
Hinged
Adaptors Set inc. 1/2” sq, 3/8” sq, 1/4” sq, 1/4” hx
*spanners in this set do not have a reversible switch.
¹available while stocks last.
14 02
14 02
RECA Socket Sets
RECA 4-in-1 Power System 17pc Socket Set
 1 tool for 4 drive types. Multiple system for metric, imperial, external torx & multi spline heads.
 The torque from ratchet lever & socket is 60% greater than DIN3124 3/8” socket systems.
 Open ratchet head design to allow nuts to be
tightened over long threads.
 Reduced depth for use in confined spaces, even
when using adaptors.
 Two component handle for non-slip grip.
 Reversible switch on ratchet head.
 Smooth 72 teeth ratchet give 5° movement, ideal
14 03 VY 10/16 - Reproduction, even in part prohibited. Printed in UK
for confined spaces.
 1/2” and 3/8” inch adaptors included to allow use
of standard square drive sockets.
 Metal case with foam insert to hold contents.
Art. No.
Contents
Sockets - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, & 24mm:
0700 013 017
1/2” & 3/8” square drive adaptor, 75mm extension & dual grip ratchet
0700 013 000
Dual Grip Ratchet Only
Socket / Head / Thread Comparison Chart
Metric Socket AF Fits Imperial Head AF Fits External Torx
Fits Bolt or Nut Thread
Diameter
10 mm
3/8”
E12
M6
11 mm
7/16”
E14
M7
12 mm
15/32”
E16
13 mm
1/2”
M8
14 mm
E18
M9
15 mm
19/32”
16 mm
5/8”
E20
17 mm
M10
18 mm
E22
19 mm
3/4”
E24
M12
21 mm
22 mm
7/8”
M14
24 mm
15/16”
M16
RECA Impact Sockets
Impact sockets are specifically designed and manufactured for use with an impact wrench or driver.
Manufactured from toughened steel and heat treated for extra durability to protect from the shock and
torque delivered by the tool.
 Hardened sockets for use on any 1/2 inch square drive impact wrench.
 Suitable for use on cordless, electric or air powered tools.
 Can be used to drive bolt heads, nuts and anchors such as thunderbolts.
Impact Sockets Short
Impact Sockets Long
Bolt A/F or
Bolt A/F or
Art. No.
Length
Art. No.
Length
Size
SW
Size
SW
0700 121 113 M8 13mm 38mm
0700 121 713 M8 13mm 80mm
0700 121 117 M10 17mm 38mm
0700 121 717 M10 17mm 80mm
0700 121 119 M12 19mm 38mm
0700 121 719 M12 19mm 80mm
0700 121 124 M16 24mm 38mm
0700 121 724 M16 24mm 80mm
14 03
14 03
RECA Socket Sets
New Unique Patented Reca Ratchet designed set
 Smooth 48 tooth ratchet with a 7.5° angle, extremely robust, smooth
running and very stable.
 Quick release button with safety lock, fast easy change of sockets
from ratchet.
 Unique ‘ P ‘ shaped reversing lever, easy identification of the direction
of rotation.
 Ergonomic handle with large side surfaces and bevelled edges. Fatigue free and more
comfortable to hold.
Set manufactured from Chrome vanadium steel
6 Point rounded profile sockets
ABS Plastic case with a foam inlay to hold contents securely and an overview of the set inside the
cover, enabling easy identification of parts.
RECA 1/2” Socket Set 27pc
Art. No
Contents
RECA ½” Ratchet
Sockets 2 x 10, 11, 12, 2 x 13, 14, 15, 16, 2 x 17, 18,
2 x 19, 21, 22, 24, 27, 30, 32
0700 120 027 Extension Bar 75, 125 and 250mm
Universal Joint ½”
Adaptor ½” female to 3/8” male
T bar Adaptor ½” female to 3/8” male
0700 120 000 RECA 1/2” Ratchet only
14 04 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
RECA 1/4” Socket Set 24pc
Art. No
Contents
RECA ¼” Ratchet
Sockets 4, 5, 5.5, 6, 2 x 7, 2 x 8, 9, 2 x 10, 11, 12,
2 x 13, 14
Extension Bar 50 and 100mm
0700 140 024 Flexible Extension Bar 150mm
Drive Handle ¼”
Bit Adaptor ¼”
Sliding T bar
Universal Joint ¼”
0700 140 000 RECA 1/4” Ratchet only
14 04
14 04
RECA Screwdrivers
RECA Multi Screwdriver Set
A versatile tool for multiple applications, use while in
the workshop or ideal when out on site.
 Blades manufactured from chrome vanadium,
molybdenum steel; high quality, strong and robust.
 Change between screwdriver and T Handle, without having to change blade.
 Blades have black tips; ensuring a precise and perfect fit every time.
 Blade length 160mm and reversible; can be used as extra long




screwdriver bits on cordless drills.
Two component handle with soft grip outer material; helps to provide
extra torque.
1/4” drive system so standard screwdriver bits can also be used in the
handle; multipurpose usages.
9pc set comes in a pouch with a belt loop.
13 pc set comes in tough storage box.
Art. No.
0701 900 1
9pc Set
0701 902 1
13pc Set
Description
PH1 + slotted 4,0, PH2 + PH3, PZ1 + slotted 5,5
PZ2 + slotted 6,0, PZ3 + slotted 7,0
SW5 + SW6, TX20 +TX25, TX30 +TX40
Handle 105 x 39mm
PH1 + slotted 4,0, PH2 + PH3, PZ1 + slotted 5,5,
PZ2 + slotted 6,0, PZ3 + slotted 7,0
TX10 + TX15, TX20 +TX25, TX30 +TX40
SW3 + SW3Ballended, SW4 + SW4Ballended
SW5 + SW5Ballended, SW6 +SW6Ballended
Handle 105 x 39mm
RECA Ultra Screwdriver 7pc Set
14 05 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
 An impact proof core is coated with scratch resistant elastomer







containing flexible plastic. Less strain and work fatigue as it fits perfectly
within your hand.
30% more power/torque, compared with traditional grips.
Blades are manufactured from chrome molydenum vanadium steel.
Anti-roll protection, avoiding screwdriver rolling off workbench.
Hexagon bolsters on shaft, to apply extra pressure and torque with a
spanner if required.
Screw symbols on handle cap, help you to choose the right screwdriver.
Hanging hole, for easy storage or inserting lever to give extra torque.
Black tip on blade for precision fit.
Set Contains - Slotted 3.5 x 100, 4.0 x 75, 5 x 100, 6.5 x 125, 8 x 150,
PH 1 x 80, PH2 x100
Art. No. 0701 500 501
Set Contains - Slotted 3.5 x 100, 4.0 x 75, 5 x 100, 6.5 x 125, 8 x 150,
PZ1 x 80, PZ2 x 100
Art. No. 0701 500 502
14 05
14 05
RECA Ball Ended Hex Key Set
Individually and clearly marked ball ended hex key set
in a plastic storage holder.
 Blades manufactured from chrome vanadium steel.
 Ball ended version allows the user to work at angles
up to 25° ideal for those difficult to reach areas.
Art. No.
0701 749 309
Description
RECA Ball Ended Hex
Key 9pc Set
Contents
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0,
8.0 and 10mm
RECA Compact Hex Key Sets
A compact range of fold-out holders for hexagon bolts, ideal for use in
the workplace or on site.
 Blades manufactured from chrome vanadium steel.
 An innovative opening mechanism; allows easy selection of the
required key size.
 Blades can be rotated to any angle between 90° and 270°; this
saves time when working in environments where space is tight.
 Ball ended version allows the user to work at angles up to 25°;
14 06 VY 09/16 - Reproduction, even in part prohibited. Printed in UK
ideal for those difficult to reach areas.
 Ball ended set has an extra feature on the blade of a magic ring; this
holds all standard bolts tight at various angles (availabe from 3mm).
Art. No.
Description
Contents
0701 729 507
RECA Compact 7pc Set
2, 2.5, 3, 4, 5, 6 and 8mm
0701 749 507 RECA Compact Ball Ended 7pc Set 2, 2.5, 3, 4, 5, 6 and 8mm
T9, T10, T15, T20, T25, T27,
0701 759 508
RECA Compact Torx 8pc Set
T30 and T40
14 06
14 06
RECA Pliers
RECA Quintus Pliers
5-in-1 multipurpose pliers, ideal for any tool kit.
1) Cutting - Induction hardened, 62-64HRC jaws.
2) Holding - Short jaws, serrated gripping faces.
3) Stripping - 0.5, 1.5 & 2.5mm2 cable.
4) Crimping - Cable sleeve and end sleeves 0.5, 1.5 & 2.5mm2.
5) Squeezing
Art. No. 0703 999 011 - 180mm long
RECA Combination Pliers
Ideal for applications when holding and cutting a piece of
material is required while working. A range of sizes for most
applications. An essential piece of every tool kit.
 Specially designed two component handle; This provides





optimum comfort and gripping characteristics.
Ergonomic handle design; Allows the hands force to spread
over a maximum contact area.
Manufactured from special tool steel, oil hardened and
tempered.
Cutting edges of head have been additionally induction
hardened, cutting edges approx hardness ca 60HRC.
Gripping zones for flat and round material; versatile.
Cutting edges for soft and hard wire.
Art. No.
Length mm
0703 011 165
165
0703 012 185
188
0703 013 205
205
RECA Diagonal Cutters
14 07 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Indispensable for all round use, cuts fine wire cleanly.
 Specially designed two component handle; This provides
optimum comfort and gripping characteristics.
 Ergonomic handle design; Allows the hands force to be spread
over a maximum contact area.
 Manufactured from vanadium electric steel, oil hardened and





tempered.
Chrome plated head.
Cutting edges made of vanadium steel; Gives a long service life.
Edges machined precisely, and are very sharp; Enables a clean
cut of hard and soft wires.
Cutting edges of head have been additionally induction
hardened, cutting edge approx hardness ca 60HRC.
Narrow head style; Ideal for use in confined spaces.
14 07
Art. No.
Length mm
0703 021 145
145
0703 022 160
160
0703 023 180
180
14 07
RECA Pliers
RECA Flat Nose Pliers






Specially designed handle; This provides optimum comfort and grip.
Ergonomic handle design; Allows for maximum contact area.
Manufactured from special tool steel, oil hardened and tempered.
Chrome plated head.
Serrated gripping surface.
Short, flat jaws.
Art. No. 0703 031 160 - 160mm long
RECA Round Nose Pliers







Specially designed handle; This provides optimum comfort and grip.
Ergonomic handle design; Allows for maximum contact area.
Manufactured from special tool steel, oil hardened and tempered.
Chrome plated head.
Smooth tips.
Precision ground, short, round jaws.
Ideal for forming wire loops.
Art. No. 0703 032 160 - 160mm long
RECA Cable Shears
Ideal for cutting copper and aluminium cables, single and multiple wire.




14 08 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Specially designed handle; This provides optimum comfort and grip.
Ergonomic handle design; Allows for maximum contact area.
Manufactured from special tool steel, oil hardened and tempered.
Precision ground hardened blades; Gives a
clean cut without crushing or deformation.
 Easy cutting with one hand operation.
 Adjustable screw joint, self locking.
Art. No. 0703 028 160 - 160mm long
14 08
14 08
RECA Pliers
RECA Wire Strippers
 Specially designed two component handle; This provides





optimum comfort and gripping characteristics.
Ergonomic handle design; Allows the hands force to be spread
over a maximum contact area.
Manufactured from special tool steel, oil hardened and
tempered.
For single, multiple and fine stranded conductors with plastic or
rubber insulation max. 5.00mm dia. and 10mm² cable cross
section.
Easy adjustment to the required diameter of solid or stranded
Art. No.
Desc. Length
wire with knurled screw and lock nut.
0703 033 160 Standard 160mm
VDE option available.
0703 073 160 VDE
160mm
RECA Water Pump Pliers
 Polished head with non-slip plastic coated handles
 Manufactured from chrome vanadium electric steel,
oil hardened and tempered.
 Box joint design; High stability due to double guide.
 Gripping surfaces with special hardened teeth, teeth hardness
approx. 61HRC; Low wear and secure gripping.
 One hand adjustment; Saves time and test adjusting, push
button and move to close lower jaw.
 Self-locking on pipes and nuts; No slipping on the work piece
14 09 VY 04/16 - Reproduction, even in part prohibited. Printed in UK
and low hand force required.
 Fine adjustment; Ensures optimum adjustment for different
size applications.
Art. No.
Length mm Capacity Pipe Inch
Capacity Nut mm
0703 822 180
180
1 1/4
30
0703 823 251
250
2
50
0703 824 300
300
2
46
Adjustments
11
25
14
RECA Plier Sets
Set 1 - Contains
1 x RECA 2K Combination Pliers 185mm
1 x RECA 2K Diagonal Cutters 180mm
1 x RECA 2K Flat Nose Cutting Pliers 200mm
1 x RECA Water Pump Pliers 250mm
Art No. 0703 041
Set 2 - Contains
1 x RECA 2K Combination Pliers 185mm
1 x RECA 2K Diagonal Cutters 180mm
1 x RECA 2K Wire Strippers 160mm
1 x RECA 2K Snipe Nose Cutting Pliers 160mm
Art No. 0703 042
14 09
14 09
RECA Pipe Cutters
RECA Cutter Mini 3-25mm





Ideal for thin walled copper tubes.
Capacity 3-25mm (1/8”-1”).
Compact design for when access is limited.
Ergonomic handle.
Spare wheels available.
Art. No. 0703 511 325
RECA Telescopic Cutter 3-35mm




Ideal for thin walled copper tubes.
Capacity 3-35mm (1/8”-1 3/8”).
4 Rollers for precise and better handling of tube.
Comfortable and ergonomic handlewith a spare
wheel attached.
 Heavy handle allows fast adjustment.
 Complete with removable Noga deburring blade
 Spare wheels available.
Art. No. 0703 511 335
Spare wheels For cutters
Art. No.
Cutting
Pack Qty
0703 511 195
0703 521 195
Copper and aluminium 19 x 5 x 4.7mm
Steel and Stainless Steel 19 x 5 x 4.7mm
10
10
14 10 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Pipe Wrench c/w rapid adjustment








Push button adjustment allows quick opening & closing of jaws, one handed operation.
Teeth “self lock” onto material for a firm grip, special jaw profile will grip a variety of shapes and sizes.
Jaw teeth extra hardened for long life.
Jaw capacity up to 42mm.
Handles designed so they wont close and trap your hand.
Dipped handles for extra comfort.
Manufactured from chrome vanadium steel, forged and oil hardened.
Length 325mm.
Art. No. 0703 861 100
14 10
14 10


















RECA Lever Clamps
Lever clamps are lightweight and easy to handle, they can clamp up to 5x faster than conventional
clamps due to the natural force of a lever.
An essential product for any workshop
 Secure ratchet mechanism, ensures rapid controlled vibration free clamping of
material.
 Extremely sturdy.
 Forged sliding arm, this is serrated and made from tempered drop forged steel,
for an extremely long service life.
 A non slip plastic coated release lever provides a secure hold as you release
the clamp.
 A clamping force of up to 8,500n.
Art. No.
0695 700 220
0695 700 230
Opening mm
200
300
Throat Depth mm
100
120
RECA All Steel Screw Clamps
 Patented omega bend gives added safety meaning you lose less clamping
pressure, even when vibrations are present.
 The clamp is manufactured from a single piece with a moulded pressure
plate, hardened, tempered and galvanised making it highly durable.
 Close flat clamping, the bend allows you to place the clamp absolutely
flat to the surface of the work piece and allows clamping right into the
corner.
 Clamping force of up to 5,000N
14 12 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Art. No.
0709 020 100
0709 030 140
Opening mm
200
300
Throat Depth mm
100
140
Rail mm
19.5 x 9.5
25 x 12
Solo Clamps




Quick one-handed fastening and release.
Up to 170 kg clamping force.
150 mm (6") capacity.
Top jaw can be angled to suit work piece.
Art. No. 2142 015 09 - Plastic Coated Jaws
2142 115 09 - Metal Jaws
14 12
14 12
RECA Welding Clamps
Standard Pattern
 Standard pattern self grip wrenches with fine
screw adjustment for different widths of metal
and quick release lever.
 Serrated jaws adjust to lock in position and
stay locked without pressure from hands.
C-Clamp with Swivel Pads
 Reaches in to places where ordinary clamps cannot.
 Ideal for car bodywork, welding and sheet metal work.
 Exceptionally large throat allows wide objects to be
gripped.
 Swivel pads allow irregular or taped parts to be
gripped as well as standard straight parts.
 Fine screw adjustment and quick release lever.
U-Form Locking Welding Clamp
 Holds parts in proper alignment before welding.
 Suitable for materials of different thicknesses.
 Special deep-throated U shaped jaws.
 Fine screw adjustment and quick release lever.
Description
Standard Pattern Locking Clamp
C-Form Swivel Jaw Locking Clamp
U-Form Locking Clamp
Size
250mm
280mm
280mm
14 13 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Art. No.
0703 902 250
0703 931 280
0703 921 280
14 13
14 13
RECA Hacksaws & Blades
RECA Master Hacksaw Frame
 Heavy duty tubular frame for maximum rigidity.
 ‘D’ handle gives firm grip.
 Quick and easy blade tensioner for fast
replacement of blades.
 Blades can set at 0º for normal use and 55º for
flush cutting.
 Blade storage inside the frame.
Art. No.
0709 100
0709 101
Description
RECA Master hacksaw frame
RECA Master hacksaw frame
Inc. 10 progressive teeth blades
RECA Hacksaw Blades
 Bi-metal blades to the highest standards to cope with the most demanding tasks.
 HSS teeth are joined to the flexible steel backs with a strong seamless weld.
 Bi-metal construction offers maximum flexibility and the blade is virtually unbreakable in normal use.
Progressive Teeth Hacksaw Blade
 New progressive teeth; the first teeth are 32 tpi and then get steadily coarser until they are 18 tpi.
This allows a smooth start and normal stock removal when in use.
14 14 VY 05/16 - Reproduction, even in part prohibited. Printed in UK
Art. No.
0603 300 318
0603 300 139
0603 300 132
0603 300 30
Dimension
Teeth
300 x 13mm (12” x 1/2”) 18 tpi
300 x 13mm (12” x 1/2”) 24 tpi
300 x 13mm (12” x 1/2”) 32 tpi
300 x 13mm (12” x 1/2”) Progressive
RECA Mini Hacksaw with Frame
 Much easier cutting compared to old fashioned
wire frame.
 Features a square section frame, ergonomic
grip and a knurled edge tensioning screw.
Art. No.
0609 2
0609 3
14 14
Description
32 tpi blade
H/D frame + bld
Size
150mm
150mm
14 14
Trimming Knives
The RECA quick blade change retractable trimming
knife complete with protective holster, integral belt
clip & five heavy duty blades. Features a ‘no tool’
knife opening system, multi blade stops & ball
bearing construction. Soft grips ensure comfortable
use. Takes heavy duty trimming blades.
Art. No. 0710 401 61
14 15 VY 06/17 Reproduction, even in part, prohibited. Printed in UK.
HT 19: Quick blade-change
interlocking trimming knife,
complete with protective holster,
integral belt clip and one heavy
duty blade. Takes heavy duty
trimming blades.
Art. No. 2150 000 40
HT 9: Die-cast metal, fixed blade trimming knife
with thumb grip. No blades included. Takes heavy
duty trimming blades.
Art. No. 2150 000 50
HT 14: Retractable blade trimming knife, die
-cast metal. No blades included. Takes heavy duty
trimming blades.
Art. No. 2150 000 60
SN 112: Pocket Knife with self-locking
device. 9mm.
Art. No. 2150 000 90
SN 102: Heavy duty knife with ratchet &
fixing lock. 18 mm.
Art. No. 2150 001 80
Spare snap off blades. Pack of 10.
Art. No. 2150 002 80 - 18mm
2150 002 90 - 9mm
Heavy Duty Trimming
Knife Blades.
100 blades packed in a
safety dispenser for safe
removal of blades
Art. No. 2150 101 00
14 15
Heavy duty, high quality,
made in Sheffield,
trimming knife blades.
Packed in 5’s
Boxed in 100’s.
Art. No. 2150 100 50
14 15
Measuring Tapes
RECA Tape Measure




ABS plastic case in RECA green.
One side printing.
EG accuracy class II.
Nylon coated steel blade.
Art. No.
5m - 0705 205
8m - 0705 208
5M Tape with Magnet
 Wide 25mm tape gives 2 metre stand out.
 Magnetic blade hook can be used conventionally or to stick to
metal objects for easier use over longer distances.
 Positive blade lock.
 Complete with belt clip.
Art. No. 0705 235 1
15M Tape with Magnet
 15 metre tape band for large measuring tasks.
 Wide 25mm tape gives 2 metre stand out.
 Magnetic blade hook can be used conventionally or to stick
14 16 VY 06/17 - Reproduction, even in part prohibited. Printed in UK
to metal objects for easier use over longer distances.
 Fold out winder for quick retrieval.
 Positive blade lock.
 Complete with belt clip.
Art. No. 0705 235 15
5M / 16FT Metric & Imperial Tape
 High impact ABS case with rubber outer for strength,
durability, comfort and grip.
 25mm wide blade - exceptional stand out.
 Front and bottom lock mechanisms.
Art. No. 0705 905
14 16
14 16
RECA Angle Measurer and Levels
Angle Measurer
 Horizontal and vertical spirit level for
application in any position.
 Large display for easy reading.
 Resolution: 0.1°
 Display can be reset in any position or with
the legs at any angle.
 Power save function switches device off
automatically after 3 minutes of non-use.
Art. No. 0705 200 450
Technical Data
Measurement range
Arm length
Weight
Power supply
0-200°
40cm
0.65kg
2 x 1.5V type AA (included)
Premium Levels





Smooth rectangular aluminium profile, a classic design for all applications.
Lightweight.
Electrostatic powder coating, measuring surface is completely smooth.
End caps, these provide impact and good shock absorption for the measuring surface.
Vial block is made from acrylic glass, 1 Horizontal and 1 Vertical vial.
14 17 VY 06/17 - Reproduction, even in part prohibited. Printed in UK
Art. No.
0705 407 060
0705 407 080
0705 407 100
Length
(mm)
600
800
1000
Accuracy in Normal Accuracy in OverPosition
head Position
0.5mm/m
0.75mm/m
0.5mm/m
0.75mm/m
0.5mm/m
0.75mm/m
Torpedo Level
 Manufactured from reinforced ABS plastic
 Two Strong disc magnets on the base of
the level
 1 Horizontal and 1 Vertical Vial, round vials
allow good readability
 250mm Long
Art. No. 0705 400 025
14 17
14 17
Engineers Square
The Engineers Square has been carefully crafted from high
quality tool steel. These squares are accurate to BS939 Grade
B standard. The stock and blade are precision ground to ensure
straightness and accuracy. The spring steel blade is
hardened and tempered for increased durability. 150mm.
Art. No. 0705 521 150
Combination Square
A Combination square set for use outside and inside as a try square,
mitre square, depth and marking gauge. Precision ground steel
stock and a stainless steel rule with deep etched graduations.
The centre head enables the accurate location and marking of the
centre of circular items.
The graduated protractor turns through 360° for measuring and
constructing angles.
Size 300mm/12”
Art. No. 0705 910 300
RECA Pocket Scriber, Carbide Tip
For applications that require precise and defined marking on most metal surfaces. Compact size. The
regrindable tips can be changed quickly and easily. Suitable for material up to 60 HRC.
Art. No.
Length
Pack Qty
0705 651 150
0705 651 151
150mm
30mm replacement tips
1
5
14 18 VY 06/17 - Reproduction, even in part prohibited. Printed in UK
RECA Double Ended Scriber
 Knurled handle with steel tip.
 Has two points, one at a 90° angle giving improved access for marking in confined spaces.
 Length 250mm.
Art. No. 0705 654 250
RECA Automatic Centre Punch






All active parts made from hardened steel
Impact force determined by spring force, no pilot or centre drill required.
Tip hardness 54-58 HRC
The punch has a mechanism that automatically strikes a blow when downward pressure is applied.
No hammer required.
Length 125mm, Diameter 14mm.
Art. No. 0695 500 602
14 18
14 18
RECA Chisel and Punch Set
 Striking tools comply to DIN Standards.
 Manufactured from hardened chrome vanadium steel.
 Both chisels and punches are quenched and tempered, to ensure a
longer working life of the tool.
 Chisels and punches have a polished surface.
Set Contents:
Flat cold chisel, 125mm, 150mm
Cross cut chisel, 125mm
Taper punch, point 2mm & 3mm
Centre punch, 120 x 10
Applications: Cold designates that they should be used for
cutting ‘Cold Metal’, removing waste/chips from metal, when you cannot
easily do the same job with other tools like a file, hacksaw or power tool.
Flat cold chisels are mainly used to cut metal bar or rod, but they can be
also be used on metal sheet when this is too hard to cut with tin snips.
Cross cut chisels are mainly used for cutting grooves and slots.
Art. No. 0704 190
14 19 VY 06/17 - Reproduction, even in part prohibited. Printed in UK
RECA Digital Vernier Calipers
A digital caliper which allows
precise measurements to be taken
quickly and easily.
 Manufactured from hardened
stainless steel, providing precision
readings through a clear liquid
display.
 Digital section allows you to switch between metric and imperial readings.
 Also has a fine adjustment roller to enable precise measurements to be taken quickly and easily.
 Comes complete in a plastic box with a spare battery.
Measuring Range: 0-150mm/0-6”
Measuring Unit: 0.01mm/0.0005”
Art. No. 2680 981 115
14 19
14 19
Bahco 244 Handsaw
 Universal tooth set with hardened teeth, giving up to 5 times the





life of conventional teeth.
The saw is ideal for cutting medium/thick materials.
It is particularly effective for cross and rip cutting in chipboard,
hardboard and hardwood.
A one component plastic handle can be used for approximate 45º
and 90º marking guides.
Screwed handle onto blade for added safety.
Used by carpenters, joiners, builders, decking specialists, trades
people and contractors.
Art. No.
0695 990 022
Length mm (Inches)
550 (22”)
TPI
7/8
Box Qty
10
Bahco 300 Prizecut Toolbox Saw
 General purpose saw with fine teeth for smooth sawing in a wide
variety of materials including aluminium, plastics, laminates,
wood and chipboard.
 Fine toothing for smooth finish.
 Hardpoint, fleam toothing for long life.
 Comfortable, screwed one piece plastic handle.
Art. No.
0695 990 014
Length mm (Inches)
350 (14”)
TPI
15/16
Box Qty
10
Stanley Claw Hammer
 Heat treated forged high carbon steel curved claw head that is fully
polished and rim tempered for durability and safety.
 The fibre glass handle absorbs shock and vibration, and the textured
rubber ensures a comfortable secure grip.
14 20 VY 06/16 - Reproduction, even in part prohibited. Printed in UK
 High visibility yellow colour, makes the hammer safe and east to locate in
the work place.
 Weight 450g (16oz)
Art. No. 0708 151 621
RECA Work Bag
 Designed to give protection to your tools and equipment.
 Top quality polyester material hard bottom bag with a hidden compartment
that can contain a VISO assortment set.
 11 pockets plus velcro straps to attach a level.
 Carry strap and metal carrying handle making it easy to carry over the
shoulder or in the hand.
Art. No. 0700 001 200
14 20
Hidden compartment for VISO
assortment
14 20
RECA Lights
R200 Workshop Light
 Robust and splash-proof plastic housing with rubberized grip.
 Rotary handle, adjustable through 340°, can be locked in twelve steps for






flexible light alignment.
Removable, 360° rotating hook.
Ultra strong holding magnet at the bottom of the handle.
Two light functions (100% / 50% light output).
Built-in Li-Ion rechargeable battery (3.7V / 1500mAh).
Charge via AC / DC power supply (110V-240V) or optional
car adapter (12-24V). UK PLUG NOT INCLUDED.
Charging indicator light via coloured LED.
Art. No. 0981 200 200
R2F Zoom Flashlight
 High quality aluminium torch for professional use.
 Use of the latest LED technology from CREE.
 Continuous focus by moving the lamp head from precise spotlight to
floodlight.
 Large on / off switch and gripped surface for maximum ease of use
even with gloves, ideal for single-handed operation.
 Two light functions: 100% / 30% luminosity.
 Protection class: IP54 / shock resistant up to 1m drop height.
 Includes 3 x Micro AAA alkaline batteries and hand strap.
Art. No. 0981 102 002
14 21 VY 06/17 - Reproduction, even in part prohibited. Printed in UK
R20 LED Professional Penlight
 Extremely bright due to white NICHIA quality LED.
 Fixed lens technology for perfect illumination.
 Easy handling thanks to practical end cap switch.
 Housing made of robust aircraft aluminium with retaining clip.
 Splash proof according to IP54.

Protected from limited dust ingress.

Protected from water spray from any direction, limited ingress
protection.
 Includes 2 x Micro AAA alkaline batteries and hand strap.
Art. No. 0981 102 003
14 21
14 21
Electrical
240 VOLT PLUG
 Standard 240 volt, 13 amp, three pin plug for general use.
Art. No. 2530 000 59
11O VOLT PLUG & TRAILING SOCKET 16AMP
 Standard 110 volt plug for portable power tools.
 Can be combined with cable to make trailing leads to required lengths.
Art. No.
2530 001 09 - 16Amp / 110V Plug
2530 001 59 - 16Amp / 110V Coupler
TUNGSTEN HALOGEN LAMPS
 Suitable for 500W tripods and portable site lights.
Art. No.
2535 400 19 - 110V
2535 400 29 - 240V
4 WAY SPLITTER BOX 110 VOLT
 A standard, steel cased 4-way 110 volt, 16 amp distribution box with 5
metres of 2.5 mm cable and 16 amp plug.
Art. No. 2520 000 19
CABLE REEL - 110V
 Flexible 25m long 1.5mm yellow cable. Robust Polypropylene drum and
steel stand. IP44 water splash resistant.
 Twin 16a 3pin 1p44 sockets (BSEN 60309).
 Hand settable thermal over-temperature trip.
 Manufactured to BSEN 61242 & BSEN 60309.
Art. No. 2530 25 110
14 22 VY 65/17 - Reproduction, even in part prohibited. Printed in UK
EXTENSION LEAD - 110V
 Flexible 1.5mm yellow cable, length 14m (50 feet).
 High quality 3 pin plug and coupler (BSEN 60309).
 Manufactured to BSEN 61242 & BSEN 60309.
Art. No. 2530 14 110
Transformers
 Used to convert normal 240 volt mains supply to safer 110 volt output
as used on building sites.
 Reinforced glass fibre case to withstand the building site environment.
 Thermal overload cut out facility to protect the transformer should it
be operated over its capacity, complete with quick push button reset.
To requirements BS 3535.
Art. No.
2515 075 00
2515 100 00
2515 150 00
2515 225 00
14 22
Tool VA Cont. VA
Rating Rating
750
500
1000
750
1500
1000
2250
1500
Tool VA Cont. VA
Outlets
Rating Rating
1 x 16 amp 2515 300 00 3000
2000 2 x 16 amp
2 x 16 amp 2515 300 32 3300
1 x 32 amp
2 x 16 amp
2 x 16 amp
Outlets
Art. No.
14 22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising