PURPOSE •Refer to TSB-05-00-010 for Raider PDI

PURPOSE •Refer to TSB-05-00-010 for Raider PDI
No: TSB-05-00-011
SUBJECT:
RAIDER NEW MODEL
TECHNICAL SERVICE INFORMATION
DATE: September,
MODEL: 2006
2005
Raider
CIRCULATE TO:
[ ] GENERAL MANAGER
[X] PARTS MANAGER
[X] TECHNICIAN
[X] SERVICE ADVISOR
[X] SERVICE MANAGER
[ ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This bulletin contains important new model service information for 2006
Mitsubishi Raider.
The 2006 Raider Service Manual CD (p/n MSCD- 003B-2006) includes the Body
Repair Manual. The CD is provided with this TSB mailing to dealers.
•Refer to TSB-05-00-010 for Raider PDI instructions.
•Refer to TSB-05-00-012 for Raider towing specifications and camper usage recommendations.
•Refer to TSB-05-00-013 for instructions on using the MUT-III scan tool on Raider vehicles.
•Refer to Warranty Bulletin WB 2006-005 and the "Labor Operation Time Schedule and Special Raider Policies
and Procedures for 2006 Raider" booklet for warranty claim and audio exchange information.
TOPIC
PAGE NO.
1. Pre-Delivery Inspection
2
2. Key Programming
2
3. Lamp Controls
3
4. Passenger Frontal Airbag
3
5. OBD-II Readiness
4
6. Switchable Power Outlet
4
7. PCM Replacement
5
8. Control Module Replacement
5
9. Accessories
5
10. Special Tools
7
ATTACHMENT A - SERVICE MANUAL LAYOUT
ATTACHMENT B - SERVICE MANUAL ACRONYMS
12
8
1.PRE-DELIVERY INSPECTION
Dealers must use a separate "Truck Pre-Delivery Inspection Worksheet" for Raider (part number MSSF105NM06). A small quantity was
sent to all dealers. Order additional copies from Relizon (call 1-866-980-7000). Refer to TSB-05-00-010 for details on Raider PDI
procedures.
2.KEY PROGRAMMING
Vehicle keys contain the transmitter for the Remote Keyless Entry System (RKE)
and the Sentry Key Immobilizer System (SKIS).
Most 2006 Raiders have RKE only. SKIS is available as a factory-installed option
only on XLS-V8 models. Models equipped with SKIS can be identified by the
illumination of the security indicator in the instrument cluster, which illuminates
briefly as a bulb test after the ignition switch is turned ON.
The Sentry Key Remote Entry Module (SKREEM) is also sometimes referred to in the service manual as the Wireless Control Module
(WCM). Two SKREEM modules are available: one for vehicles with RKE only; and one for vehicles equipped with RKE and SKIS. The
SKREEM and its antenna are concealed under the steering column shrouds.
You can program up to eight keys (transmitters). To program or add a new key with the MUT-III:
DO NOT ERASE THE PROGRAMMING ON A SENTRY KEY THAT WILL BE RE-USED. AFTER A SENTRY KEY IS ERASED, IT
CANNOT BE REPROGRAMMED.
If two valid (already programmed) keys are available, the customer or dealership can program additional keys without the scan tool as
follows:
a.Insert the first valid key into the ignition and turn the ignition to the ON position for at least 3 seconds but no longer than 15 seconds. Turn
the ignition back to the OFF position and remove the first key.
b.Insert the second valid key and turn the ignition to the ON position within 15 seconds. After 10 seconds, a chime will sound and the
"Security" light will flash. Turn the ignition back to the OFF position and remove the key.
c.Within 1 minute of removing the second key, insert a blank key into the ignition and turn the ignition to the ON position. Wait 10 seconds. A
single chime will sound. The "Security" light will stop flashing and come on for 3 seconds. The new key is now programmed. Repeat this
process for additional keys.
To cut keys for Raider vehicles, key cutting machines (except Ultracode machines) require a special adapter kit, which are available from
SPX (1-888-727-6672):
Key Cutting Machine Type
Adapter Kit Required
Kaba Ilco 74-MK1-P26
MK1-MIT/CH-AE
Kaba Ilco 74-029A
029A-CHY1
If your dealership has a different key cutting machine, contact the manufacturer's representative.
Key blanks are available from your facing PDC:
p/n 05174497AA - Raider models without RKE/immobilizer
p/n 05170630AA - Raider models with RKE without immobilizer
p/n 05170631AA - Raider models with both RKE and immobilizer
3.LAMP CONTROLS
a.For daytime driving with the headlamps on, advise customers to turn the
instrument panel lamp dimming rheostat to the fully up position. This position will
keep the audio display at full brightness to improve daytime visibility while the
headlamps are on. If the rheostat is not in this position, the audio display may be
difficult to read when the headlamps are on during the daytime.
With the dimmer switch in the fully up position, the dome light will stay on after the
doors are closed. With the dimmer switch in the fully down position, the dome light
will not come on.
b.The headlamps have a "Delayed Off" feature to help illuminate your way after exiting the vehicle. The delay works as follows: With the
headlamps on, turn the ignition off, remove the keys, and turn the headlamp switch to the off position and exit the vehicle. The lights will stay
on for about 60 seconds.
4.PASSENGER FRONTAL AIRBAG
Refer to the Section 2 in the Raider owner's manual for details on operation of the Occupant Classification System.
On Extended Cab models, the passenger frontal airbag can be manually shut off and on as follows:
To turn off the passenger frontal airbag: Insert the ignition key in the Passenger Airbag On/Off switch. Push the key in and turn clockwise.
Then remove the key. The passenger airbag disable lamp will display "OFF" when the ignition switch is turned on.
To turn on the passenger frontal airbag: Insert the ignition key in the Passenger Airbag On/Off switch. Push the key in and turn
counterclockwise. Then remove the key. The passenger airbag disable lamp will display "ON" when the ignition switch is turned on.
Operation of passenger frontal airbag light:
Passenger Seat Occupant
PASS AIRBAG OFF Light Status
Adult over 100 lbs (45 kg)
OFF
ON
Heavy Parcel approx. 40 lbs (18 kg)
ON
OFF
OFF
(but light may turn on depending on weight, shape, & position of parcel)
OFF
OFF
OFF
Light Parcel (under 40 lbs (18 kg)
Empty Seat
Passenger Airbag Status
5.OBD-II READINESS
The "Malfunction Indicator Light" (Check Engine light) is part of an onboard
diagnostic system that monitors the emissions and engine control system.
•If the vehicle is ready for OBD-II emissions testing, this light will come on when the ignition is first turned on, and remain on (as a bulb
check) until the engine is started.
•If the vehicle is NOT ready for OBD-II emissions testing, this light will come on for 15 seconds, then blink for 5 seconds, and remain on until
the vehicle is started. Drive the OBD-II drive cycle for each monitor. Refer to Group 17 in the service manual for details on OBD-II drive
cycles.
6.SWITCHABLE POWER OUTLET
The power outlet in the instrument panel can be configured to operate only when
the ignition is ON, or when the ignition is ON or OFF (battery feed). (The owner's
manual for early production vehicles incorrectly identifies the switchable outlet as
the console power outlet.)
Locate the power outlet (switchable) fuse in the fusebox in the engine
compartment. Refer to the fuse diagram provided on the underside of the fusebox
lid.
The power outlet in the instrument panel will operate by battery feed (ignition in
ON or OFF position) when the power outlet (switchable) fuse is in the inboard
position as shown. When this fuse is in the outboard position, the outlet will
operate only with the ignition ON.
7.PCM REPLACEMENT
Replacement PCMs for Raiders require programming. Until it is programmed, the PCM will not operate, and a "Not Programmed" DTC will
be set. Refer to TSB-05-00-013 for details.
NEVER install a programmed PCM from one Raider into another Raider. Damage will result.
8.CONTROL MODULE REPLACEMENT
a.CCN: When the Cabin Control Node (contained in the instrument cluster) requires replacement, dealers must contact Radio Sales and
Service Corporation (RSSC) on-line at http://rssc-corporate.com. RSSC is the authorized Mitsubishi service center and supplier for Raider
instrument cluster exchange units. Refer to page 12 of the "Labor Operation Time Schedule and Special Raider Policies and Procedures for
2006 Raider" booklet for details on opening an account with RSSC. These booklets were shipped to dealers in early September.
DO NOT REPLACE FAILED INSTRUMENT CLUSTERS WITH NEW ONES FROM DEALER STOCK. When a dealer orders an exchange
instrument cluster from RSSC, the VIN and mileage must be entered in the on-line order. RSSC will set the replacement odometer's mileage
to match the mileage reading of the failed unit before sending it to the dealer.
b.Certain control modules listed below must not be replaced at the same time. An irreversible fault will be set in both modules.
•Do not replace the Occupant Restraint Controller (ORC) and Occupant Classification Module (OCM) at the same time. If both must be
replaced, replace one module, then run the Supplemental Restraints Verification Test with the MUT-III before replacing the other module.
•Do not replace the Front Control Module (FCM) and Cabin Control Node (CCN) at the same time. If both require replacement, you must first
contact Tech Line (1-800-446-6064) for parts ordering authorization.
•If you replace the Wireless Control Module (WCM) and the PCM at the same time, you must perform the following functions in this order.
(Refer to TSB-05-00-013 for MUT-III instructions.)
(1) Program the new blank PCM.
(2) Manually input the VIN to the new PCM.
(3) Perform "WCM Replaced" initialization (in the MUT-III System Select menu, select WCM, then Misc. Function, then WCM Replaced).
(4) Program new Sentry keys.
(5) Perform the "PCM Replacement" function (in the MUT-III System Select menu, select WCM, Misc. Function, then PCM Replaced).
9. RAIDER ACCESSORIES
Installation instructions are included with each accessory.
RAIDER ACCESSORY
PART NUMBER
AIR DEFLECTORS, FRONT HOOD
ANM06YKX01
AIR DEFLECTORS, FRONT HOOD HARDWARE KIT
ANM06YKX10
AIR DEFLECTORS, SIDE WINDOW
ANM06XDX03
AIR DEFLECTORS, SIDE WINDOW, DBL CAB
ANM06XDX01
BED EXTENDER
ANM06CEX01
BED LINER, TAILGATE COVER
ANM06YLB05
BED LINER, UNDER RAIL
ANM06YLB03
BED LINER, UNDER RAIL, DBL CAB
ANM06YLB01
BED MATS
ANM06CMB02
BED MATS, DBL CAB
ANM06CMB01
BED RAIL PROTECTORS, MOLDED, EXT CAB
ANM06YXB03
BED RAIL PROTECTORS, MOLDED, DBL CAB
ANM06YXB01
BED WEB NETS
ANM06CNB01
ENGINE BLOCK HEATER
82203640AB
EXHAUST FINISHER
ANM06YEC01
FENDER FLARES, DEALER PACK
ANM06YFD01
FENDER FLARES, HARDWARE
ANM06YFD11
FLOOR MATS, DUROCROSS DBL CAB, KHAKI
ANM06XFE08
FLOOR MATS, DBL CAB, DARK SLATE
ANM06XFD02
FLOOR MATS, DUROCROSS EXT CAB, DARK SLATE
ANM06XFD08
FLOOR MATS, DUROCROSS DBL CAB, DARK SLATE
ANM06XFD06
FLOOR MATS, DBL CAB, KHAKI
ANM06XFE02
FLOOR MATS, EXT CAB, DARK SLATE
ANM06XFD04
FLOOR MATS, DUROCROSS DBL CAB, KHAKI
ANM06XFE06
FLOOR MATS, DUROCROSS, ALL-WEATHER
ANM06XRB04
FOG LIGHTS
82209046
FRONT FASCIA PLATE
ANM06YCS01
FRONT FASCIA PLATE HARDWARE KIT
ANM06YCS10
GAS CAP, LOCKING
05278655AB
HITCH RECEIVER, CLASS 3
ANM06YHX01
HITCH RECEIVER, WIRING HARNESS
82209045
IN-DASH CD CHANGER - 6-DISC, AM/FM, MP3
05064174AC
IN-DASH SINGLE CD AM/FM
05064173AD
LOCK, SPARE TIRE
ANM06VLX01
LOCKS, WHEEL
ANM06WLX02
REMOTE START, FOR VEHICLES WITHOUT SENTRY KEY
82208996AB
REMOTE START, SENTRY KEY INTERFACE MODULE
82209083AB
REMOTE START KIT
82208859AB
SCUFF PLATES, FRONT DOOR
ANM06XXS03
SIDE STEPS, TUBULAR
ANM06YAT03
SIDE STEPS, TUBULAR, QUAD CAB
ANM06YAT01
SIRIUS SATELLITE RADIO ANTENNA/RECEIVER
82208881AA
SIRIUS SATELLITE RADIO INSTALLATION KIT
82209040AB
SKID PLATE, FUEL TANK
82209128
SKID PLATE, TRANSFER CASE
82209127
SPLASH GUARDS, MOLDED - USE WITH FENDER FLARES
ANM06YGB01
SPLASH GUARDS, MOLDED
ANM06YGB03
TONNEAU COVER, FABRIC
ANM06YTB04
TONNEAU COVER, FABRIC, QUAD CAB
ANM06YTB03
TONNEAU COVER, HARD FOLDING - DBL CAB
ANM06YTB01
TONNEAU COVER, HARD FOLDING - EXT CAB
ANM06YTB02
TOUCH-UP PAINT PEN - Alloy Silver
A9906PTS01
TOUCH-UP PAINT PEN - Arctic White
A9906PTW01
TOUCH-UP PAINT PEN - Carbide Black
A9906PTB01
TOUCH-UP PAINT PEN - Cobalt Blue
A9906PTL01
TOUCH-UP PAINT PEN - Granite Gray
A9906PTD01
TOUCH-UP PAINT PEN - Lava Red
A9906PTR01
TOUCH-UP PAINT PEN - Sahara Sand
A9906PTE01
TOUCH-UP PAINT PEN - Steel Blue
A9906PTL01
TOW HOOKS
82209129
U-CONNECT HANDS FREE CELL SYSTEM
82207853AE
10.SPECIAL TOOLS
The 2006 Raider Essential Tool Kit, containing 128 tools, was shipped to dealers in August. A flier included with the kit lists the tools and
their usage. A tool cabinet for storing these tools was also shipped in August. Tool cabinet labels and locators are provided with the tool kit.
Three additional tools for Raider will be sent to dealers in the near future.
If your dealership did not receive the Raider Essential Tool Kit or storage cabinet, or if you require additional tools mentioned in the Raider
service manual, please contact SPX (1-888-727-6672).
Raider Service Manual tool designations are 4-digit Daimler-Chrysler tool numbers. To place orders for Raider tools, use the Mitsubishi tool
number, if provided.
Mitsubishi Motors North America, Inc.
ATTACHMENT A - RAIDER SERVICE MANUAL LAYOUT
The Raider service manual layout is similar to other Mitsubishi manuals. However, some information (highlighted in bold text in the chart
below) is located in different areas of the manual than you may be accustomed to.
GROUP
NUMBER
GROUP NAME
INFORMATION TYPE
00
General
Certification Label, VIN, VECI Label, Fasteners, Maintenance Schedules, Hoisting, Jump Starting, Towing, Fluids , Fuse Locations,
Bulbs, Trailer Towing
11A
Engine Electrical
Diagnostics
Diagnosing Engine DTCs, Fuel System Diagnosis, Powertrain Verification Test
11B
3.7L Engine Service
Information
Engine Description, Diagnosis and Testing, Removal, Installation, Specifications, Air Cleaner, Cylinder Head, Camshaft, Valves and
Seats, Rocker Arms, Seals, Valve Springs, Block, Crankshaft, Bearings, Seals, Flex Plate, Piston and Connecting Rods, Rings,
Cover, Mounts, Lubrication, Oil Pan, Oil Pr essure Sensor/Switch, Oil Pump, Filter, Intake and Exhaust Manifold, Timing, Balance
and Idler Shafts, Timing Chain
11C
4.7L Engine Service
Information
Engine Description, Diagnosis and Testing, Removal, Installation, Specifications, Air Cleaner, Cylinder Head, Camshaft, Valves and
Seats, Rocker Arms, Seals, Valve Springs, Block, Crankshaft, Bearings, Seals, Flex Plate, Piston and Connecting Rods, Rings,
Cover, Mounts, Lubrication, Oil Pan, Oil Pr essure Sensor/Switch, Oil Pump, Filter, Intake and Exhaust Manifold, Timing, Balance
and Idler Shafts, Timing Chain
12
Lubrication
Fluid recommendations, types, capacities, Fluid fill and check locations
13A
Fuel Delivery
Fuel Tank, Fuel Lines, Quick Connect Fittings, Fuel Pump, Fuel Rail, Fuel Pressure Regulator, Fuel Filter
13B
Fuel Injection
Accelerator Pedal, Crankshaft Position Sensor, Fuel Injectors, Fuel Pump Relay, Idle Air Control Motor, Intake Air Temp Sensor,
MAP and Oxygen Sensor, Throttle Body, Throttle Control Cable, Throttle Position Sensor
13C
Electronic Control
Modules
B-Code and U-Code DTC Diagnosis, PCM/SKREEM Programming, Anti-Lock Brake Module, Data Link Connector, Front
Control Module, PCM, Transfer Case Control Module, Transmission Control Module
14
Cooling
Diagnosis and Testing, Draining and Refilling, Cleaning/Reverse Flushing, Specifications, Belt Tensioners, Drive Belts, Coolant
Recovery, Engine Block Heater, Engine Coolant Temp Sensor and Thermostat, Radiator, Water Pump, Radiator Viscous Fan,
Transmission Cooler
15
Exhaust
Catalytic Converter, Heat Shields, Muffler, Tailpipe
16
Engine Electrical
Battery, Battery Temp Sensor, Generator, Voltage Regulator, Starter, Starter Motor Relay, Ignition System, Auto Shut Down Relay,
Camshaft Position Sensor, Ignition Coil, Knock Sensor, Spark Plugs, Ignition Switch, Ignition Key Cylinder
17
Engine and Emission Emissions, Evaporative Emissions, EVAP/Purge Solenoid, Fuel Filler Cap, ORVR, PCV Valve, Vacuum Lines, Vapor Canister,
Control
Natural Vac Leak Detection Pump, EGR Valve, Speed Control, Vacuum Reservoir
21
Clutch
22A
Manual Transmission M/T Diagnosis and Testing, Drain and Fill, Removal, Disassembly, Cleaning, Inspection, Assembly, Installation
22B
Transfer Case (M/T) Diagnosis and Testing of transfer case DTCs.
- Electrical
Diagnostics
22C
Transfer Case (M/T) NV233 operation, removal, disassembly, cleaning, inspection, assembly, installation, transfer case fluid, front output seal, mode
<NV233>
sensor, rear retainer bushing/seal, shift motor/mode sensor, selector switch
23A
Electrical Diagnostics 42RLE A/T DTC Diagnosis, Verification Test
23B
Service Information
<42RLE A/T>
23C
Electrical Diagnostics 54RFE A/T DTC Diagnosis, Verification Test
23D
Service Information
<54RFE A/T>
Clutch Disc, Release Bearing, Flywheel, Pilot Bearing, Linkage, Clutch Pedal and Position Switch
42RLE A/T Hydraulic and Clutch Pressure Tests, Fluid Leakage , Removal, Disassembly, Assembly, Installation, Schematics and
Diagrams, Accumulator, Adapter Housing Seal, Bearing Adjustment, Shift Interlock, Driving Clutches, Extension Housing Seal, Fluid
and Filter, Gearshift Cable, Holding Clutches, Input Clutch, Input Speed Sensor, Variable Line Pressure Sensor, Oil Pump, Output
Speed Sensor, Planetary Gear, Oil Pump Seal, Pressure Control Solenoid, Shift Mechanism/Solenoid, Pressure Switch, Torque
Converter, Tow/Haul Overdrive Switch, Transmission Control Relay, Transmissi on Range Sensor, Temp Sensor, Valve Body
54RFE A/T Diagnosis and Testing, Removal, Disassembly, Cleaning, Inspection, Assembly, Installation, Hydraulic Schematics,
Retainer/Bulkhead, Adapter Housing Seal, Shift Interlock, Fluid and Filter, Gearshift Cable, Holding Clutches, input Clutch, Input
Speed Sensor, Line Pressure Sensor , Low/Reverse Clutch, Oil Pump, Front Seal, Output Speed Sensor, Planetary Gear, Shift
Mechanism, Solenoid Switch Valve, Torque Converter, Tow/Haul Overdrive Switch, Transmission Control Relay, Transmission
Range Sensor, Temp Sensor, Valve Body
23E
Transfer Case (A/T)
- Electrical
Diagnostics
A/T Transfer Case DTC Diagnosis, Verification Test
23F
Transfer Case
<NV233 A/T>
NV233 A/T Transfer Case operation, removal, disassembly, cleaning, inspection, assembly, installation, transfer case fluid, front
output seal, mode sensor, rear retainer bushing/seal, shift motor/mode sensor, selector switch
23G
Transfer Case
<NV244 A/T>
NV244 A/T Transfer Case operation, removal, disassembly, cleaning, inspection, assembly, installation, transfer case fluid, front
output seal, mode sensor, rear retainer bushing/seal, shift motor/mode sensor, selector switch
25
Propeller Shaft
Front and rear propeller shaft removal and installation, U-joints, Center Bearing
26
Front Axle
Half Shaft, Inner/Outer C/V Joint and Boot, Front Axle removal, installation, and adjustment, Differential Cover, Axle Shaft, Seal,
Bearing/Bushing, Pinion Seal, Differential, Case Bearings, Pinion/Ring Gear
27A
Rear Axle <8 1/4>
Rear Axle Removal, Installation and Adjustments, Axle Shaft Seal and Bearing, Pinion Seal, Differential, Track-Lok, Case Bearings,
Pinion/Ring/Tone Ring Gear
27B
Rear Axle <9 1/4>
Rear Axle Removal, Installation and Adjustments, Axle Shaft Seal and Bearing, Pinion Seal, Differential, Track-Lok, Case Bearings,
Pinion/Ring/Tone Ring Gear
31
Wheel and Tire
Runout, Rotation, Balance, Spare Tire Winch, Wheel Studs
33
Front Suspension
Wheel Alignment, Bushings, Hub/Bearing, Knuckle, Lower Ball Joint and Control Arm, Shocks, Springs, Stabilizer Bar, Stabilizer
Link, Upper Ball Joint and Control Arm
34
Rear Suspension
Wheel Alignment, Jounce Bumper, Shocks, Springs, Stabilizer Link and Bar
35A
Basic Brakes
Service Brake Bleeding, Brake Lines Removal and Installation, Pads/Shoes, Disc Brake Calipers and Caliper Adapter, Fluid, Fluid
Reservoir, Brake Junction Block, Master Cylinder, Brake Pedal, Power Brake Booster, Rotors, Rear Brake Drums, Wheel Cylinders,
Support Plate, Brake Cables, Parking Brake
35B
Anti-Lock Braking
System
ABS DTC Diagnostics, ABS Brake Bleeding, Front and Rear Wheel Speed Sensor, G Sensor, HCU
37
Steering
Steering Diagnosis and Testing, Steering Column, Ignition Switch, Key/Lock Cylinder, Gear Shift Lever, Steering Wheel, Steering
Coupling Shaft, Lower Steering Coupling, Tilt Lever Knob, Steering Gear and Linkage, Steering Pump, Steering Fluid and Cooler,
Hoses, Steering Pump Pulley
42
Body
Wind Noise, Water Leaks, Body Lubrication, Heat Staking, Plastic Body Panel Repair, BSR, Cargo Door, Front and Rear Door,
Hood, Paint, Glass, Sunroof, Tailgate, Body Structure, Frame and Bumpers, Heated Glass, Heated Mirrors, Heated Seats
51
Exterior
Body Side Mouldings, Cargo Box, Body Side Cladding, Outside Rearview Mirrors, Upper and Lower Grille, Body Isolators, Front
Fender Liner, Cowl Top Panel, Outside Name Plates, Radiator Crossmember, Body Stripes and Decals, Splash Shield,
Wiper/Washer Diagnostics/Testing/Cleaning/ Inspection, Check Valve, Washer Fluid Level Sensor, Washer
Hoses/Tubes/Nozzle/Pump/Reservoir, Wiper Arm/Blade, Wiper Relay, Wiper Module
52A
Interior
Body Vent, Carpet, Coat Hook, Floor Console, Seat Belt Retractor Cover, Headliner, Rearview Mirror, A and B Pillar Trim Panels,
Cab Back Trim Panel, Cowl Trim Panel, Door Scuff Plate, Floor Shift Boot, Sun Visor, Instrument Panel, Defroster Grille, Cluster and
Center Bezels, Steering Column Opening C over, Seats, Headrests
52B
Restraints
SRS DTC Diagnostics, Child Restraint Anchors, Clock Spring, Side Curtain Airbag, Driver Airbag, Impact Sensor, Occupant
Classification Module, Occupant Restraint Controller Module, Passenger Airbag ON/OFF Switch and Indicator Light, Passenger
Airbag, Seat Belts, Seat Belt Pretensioner, Seat Track Position Sensor, Seat Weight Sensor
54A
Audio/Video
Audio/Video Systems Electrical Diagnosis, Radio Amplifier, Antenna Body and Cable, Instrument Panel Antenna Cable, Satellite
Radio Antenna, Radio, Satellite Receiver, Speakers, Remote Radio Switch
54B
Chime/Buzzer
Chime and Buzzer Operation, Diagnosis and Testing, Horn Diagnosis, Horn Switch
54C
Instrument Cluster
Instrument Cluster Electrical Diagnostics, Cluster Removal, Disassembly, Assembly, and Installation, Engine Temp Gauge, Fuel
Gauge, Odometer,Speedometer, Tachometer. Indicators: Airbag, Brake/Parking Brake, Cargo Lamp, Charging, Cruise, Door Ajar,
Engine Temp Gauge, ETC, Fog Lamp, Gear Sel ector, High Beam, Low Fuel, Low Oil Pressure, MIL, Seat belt, Security, Service
4WD, Transfer Case Shift, Tow/Haul, Traction Control, Trans Temp, Turn Signals, Washer Fluid
54D
Lamps
Lamps/Lighting Electrical Diagnostics, Headlight Aiming, Backup Lamps, Stop Lamp Switch, High Mounted Stop Lamp, Front Fog
Lamp, Front Combination Lamps, Headlamp Switch, License Plate Lamp, Multifunction Switch, Parking Brake Switch, Park Lamp
Relay, Rear Lamp Unit, Turn Signal Cancel Cam, Tra iler Tow Connector/Relay/Wiring, Cargo Lamp, Center Bezel Lamp, Dome
Lamp, Door Ajar Switch, Glove Box Lamp, Illumination Lamp Bulb Installation, Reading Lamp
54E
Message Systems
Overhead Console Electrical Diagnostics, Removal, and Installation, Universal Transmitter, Ambient Air Temp Sensor
54F
Power Systems
Power Locks Electrical Diagnostics, Power Lock Motor, Remote Keyless Entry Transmitter, Window/Door Lock Switch, Power
Mirrors, Rearview Mirror, MIrror Switch, Power Seats, Sunroof Motor/Module, Power Windows
54G
Vehicle Theft
Security
Electrical Diagnostics, Sentry key Immobilizer SYstem, SKIS Initialization, Sentry Key Transponder Key and Programming, Sentry
Key Remote Entry Module
54H
Navigation/
Telecommunication
Navigation/Telecommunication Electrical Diagnostics, Hands -Free Module
55
Heater, A/C and
Ventilation
HVAC Electrical Diagnostics, A/C and Heater Performance Testing, Blend and Mode Door Actuators, Recirculation Door Actuator,
A/C Compressor Clutch, A/C Heater Control, A/C Clutch Relay, Blower Motor Resistor, Ambient Air Temp Sensor, A/C Pressure
Transducer, Ducts, HVAC Housing, Blower Motor, A ir Outlet, Plumbing, A/C Accumulator, Compressor, and Condenser, Heater
Core, Refrigerant Line Coupler, A/C Evaporator, A/C Discharge, Liquid, and Suction Line, A/C Refrigerant and Oil, A/C Orifice Tube
90
Circuit Diagrams
Wiring Diagram Information, Connectors, Diodes, Terminals, Integrated Power Module, Grounds, Bus Communications, Splice
Locations, Connector Pin-Outs, Power Distribution, IOD Fuse, Power Outlet
ATTACHMENT B - RAIDER SERVICE MANUAL ACRONYMS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising