Model: HE100 ATV Hitch Extender
Model: HE100 ATV Hitch Extender
Contents:
1 ea. 5/8" x 2-1/2" bolt
2 ea. 5/8" flat washers
1 ea. 5/8" locknut
2 ea. 3/8" x 1-3/4" bolts
2 ea. 3/8" locknuts
4 ea. 3/8" flat washers
1 ea. 1-1/4" star lock washer
1 ea. Hitch extender
1 ea. Ball mounting plate
STEP 1. Bolt hitch extender to ATV trailer hitch plate using 5/8" x 2-1/2" bolt, flat washers, star washer, and
locknut. Tighten securely.
NOTE: THE STAR WASHER SHOULD BE INSTALLED BETWEEN HITCH EXTENDER
AND THE ATV MOUNTING PLATE TO PREVENT SIDEWAYS MOVEMENT.
STEP 2. Install ball mounting plate to hitch extender using (2) 3/8" x 1-3/4" bolts, flat washers, and locknuts.
Tighten securely. (SEE FIGURE 1).
NOTE: IF HITCH EXTENDER IS TO BE USED AS A RECEIVER TYPE HITCH, DO NOT
INSTALL THE BALL MOUNTING PLATE.
CAUTION: ALWAYS CHECK TONGUE WEIGHTS AND TOWING CAPACITIES
OF THE ATV THIS HITCH EXTENDER WILL BE USED ON.
FIG.1
GREAT DAY, INC. 1-866-649-1918 www.greatdayinc.com
MADE IN THE USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising