Sliding Computer Shelf
Sliding Computer Shelves
Model 112
Retractable Cable
Management Arm
(CMA)
31” h
15”- Dept
ting
n
Mou
Clevis Pin
DESCRIPTION
Universal Holes
Work with All
Racks
Rack Solution’s Sliding Computing Shelves is made
for 4Post racks and is compatible with the leading
OEMs with a weighing capacity of 45 lbs. The
Sliding Computing Shelves fit square, round, and
threaded holes. It can also be used for non-rack
mountable device. Shelves can extend up to 22.5”.
WHAT’S INCLUDED
• Equipment Straps
• Anti-slip mats
• Cable Management Arm (CMA) included with
1USHL-112 and 1USHL-112-T
• Secure PC with 2 anti-slip mats and straps
included with 1USHL-112-T
TDS-006 Rev A
P/N
DESCRIPTION
1USHL-112
Sliding Computer Shelf - 24” (with Cable Management
Arm)
112-1534
Sliding Computer Shelf - 24” (without CMA)
1USHL-112-20
Sliding Computer Shelf - 20” (without CMA)
137-1535
Cable Management Arm for Sliding Computer Shelf - 24”
1USHL-112-T
Transport, Seismic Shelf - 24” (with CMA)
Toll Free: (888) 903-7225 | Fax: (903) 453-0808 | Email: info@racksolutions.com
Reseller Agreements - Volume Agreements - Cage Code: 60QH5 - DUNS: 961816423 - Most POs accepted
RackSolutions is a registered trade mark of Rack Solutions, Inc. © Copyright 2014. All Rights Reserved. All other Marks are the property of their respective owners. Patent(s) pending.
Technical Data Sheet
11.00 MIN
30.00 MAX
MAX WIDTH 17.7
Desktop with the Shelf
Mounted Up-Side-Down
(Lose 1 USpace)
19.00
MAX WIDTH 16.375
Small Desktop with the Shelf
Mounted Right-Side-Up
17.75
5.75
1.16
TECHNICAL SPECIFICATIONS
Rack Type
• 4Post
Weight Capacity
• 45 lbs (20 kgs)
Equipment Size
• Max equipment length: 20” (508 mm)
• Max equipment width: 17.7” (450 mm)
• Maximum equipment depth: 20”
Shelf Surface Area
• 17.75” x 16.37” (451 x 416 mm)
Mounting Depth Range
• 1USHL-112: 30” (279-762 mm)
• 1USHL-112-20: 25” (279-635 mm)
Overall Installation Depth
• 1USHL-112: 24” (610 mm)
• 1USHL-112-20: 20” (508 mm)
Shelf Type
• Vented
Included Hardware
• 10-32 & 12-24 screws
• Cage Nuts are provided for square hole
racks
• Anti-slip mat and 72”strap
• Locking pin with pull ring (3/16 x 11/16)
Hole Type
• Compatible with industry standard 3/8”
(10mm) square hole racks
• Compatible with all standard round (non-
threaded) hole
• Compatible with standard threads
including 10-32, 12-24 and Metric M6
Assembly Notes
• Equipment secured via anti-slip mat and
strap to prevent equipment movement
Tech Notes
• This shelf designed to be installed with
either side up
• This kit uses a unique “universal racking
system“ designed to mount in all 2Post
rack types
• Upright depths from 1” to 17” deep are
supported
Cable Management Arm (CMA)
Articulated, cable management arm
extends forward and backward as shelf
slides in and out of the rack (included with
1USHL-112 and 1USHL-112-T).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising