iQ-DMX-STICK-CU4 - Q-Tran

iQ-DMX-STICK-CU4 - Q-Tran
iQ-DMX-STICK-CU4
1
2
3
4
5
POWER: On/Off
SCENE: Store up to 36 scenes
6
COLOR RGB: Over 16 million colors
Quickly select from 6 Basic Colors
CENTRAL BUTTON
: Reset Color
: Play next scene
: Select next bank (6 banks of 6 scenes)
: Select wheel scene mode
: No function
5.75"
iQ-DMX-STICK-CU4 controller is a DMX based
controller aimed at architectural lighting installations
requiring an advanced level of programming options
(color changing effects, specific colors etc).The controller
has been engineered to meet the needs of lighting
designers, whilst providing a clean and user-friendly
panel. Featuring an on/off button, 6 scene buttons
and a color wheel.
The controller is USB programmable from a PC or Mac
using the ESA2 software and can store up to 36 scenes
within the controller, which can be directly recalled via 6
touch sensitive scene buttons. iQ-DMX-STICK-CU4 is an
ideal solution for hotels, homes and public environments.
DIMMER: Make your lights brighter/darker
SATURATION: Adjust the saturation
4.17"
FEATURES
● DMX512 Output
● Windows / Mac software to set dynamic colors / effects
● 512 DMX channels. Control 170 RGB fixtures
● Store up to 36 dynamic or static scenes
● 12 touch-sensitive buttons. No mechanical parts
● Color palette (can also be used for scene selection)
● Touch-sensitive wheel allows for accurate color selection
● Sleek black glass design which sits 0.39" from the wall
● Built-in flash memory for storing programs
● USB connectivity for programming and control
● Live Control: Color, Dimmer, Saturation
● 5-10VDC 0.6A Input
● 8 dry contact trigger ports
● Multi-zone 76K memory
● Operating Temperature: 14ºF - 113ºF
● Dimensions: 5.75" x 4.17" x 0.39"
● Weight: 0.44 lbs
● EC, EMC, ROHS Standards
Power+DMX socket (RJ45)
Extension socket rear connectors
(2x10 pins)
Screw-terminal rear connector
(5 pins)
Front access connections
.39"
DMX LED
Data LED
Mini USB
2017.V01
PROJECT NAME
DATE
COMPANY
TYPE
NOTE
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
1
iQ-DMX-STICK-CU4
INSTALLATION
1
MOUNT AN ELECTRICAL BOX INSIDE THE WALL
2
CONNECT THE WIRES
The controller can be installed in a standard electrical backbox.
This box is usually 3.29" high and 2.36" wide. You can insert the
AC/DC adapter inside or outside the backbox.
Connector Block
POWER: Connect a 5-10V 0.6A AC/DC supply. Be sure to not
invert the + and the ground.
DMX: Connect the DMX cable to the lighting receivers (LEDs,
Dimmers, Fixtures..) (for XLR: 1 = ground, 2 = dmx-, 3 = dmx+)
There are 2 ways to connect the power and DMX:
DMX +
DMX DMX Ground
Power Ground
Power DC+
RJ45
POWER
NOTE:
● Check Pin Configurations. Applying Power To The Dmx
Input Will Damage The Controller.
● Make Sure The Controller Is Mounted Flat Without
Obstructions From Behind As This Can Push Apart The Glass .
3
MOUNT AN ELECTRICAL BOX INSIDE THE WALL
● Mount the back side of the interface on the wall with 2 ormore screws
● Plug the connectors :
- DMX and power (connector block)
- Ethernet cable
5V-9V
+
PORT 2
PORT 1
DMX
Ground
-
8
7
6
5
4
3
2
1
POWER
+DMX
+
The front panel is mounted by clipping the 2 tabs
along the top edge to the back plate and then arching
down. 1 screw should be attached underneath to hold
the controller in place.
OTHER CONNECTIONS
Dry Contact Port Triggering
HE10 EXTENSION socket
NOTE: The scene will not be switched
NC
NC
PORT8
PORT7
PORT6
PORT5
PORT4
PORT3
PORT2
PORT1
It is possible to start scenes using the dry
contract input ports available on the HE10
extension socket. To activate a port, a brief
contact of atleast 1/25 second must be
established between the ports (1....8) and
the ground (GND).
off when the switch is released.
P1
P2 P3 P4 ...
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
GND_DMX
DMX+
DMXNC
NC
NC
NC
NC
GND
VIN
Compatible header connectors:
WURTH ELEKTRONIK ref: 61301021121
MOLEX ref: 10-89-7202
TE Connectivity ref: 1-87227-0
FCI ref: 77313-101-20LF
HARWIN ref: M20-9981046
SAMTEC ref: TSW-110-xx-T-D
FARNELL ref: 1841232
RS ref: 763-6754 673-7534 251-8165
MOUSER ref: 538-10-89-7202
DIGIKEY ref: WM26820-ND
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising