led alv mr16 sign lights (xalv sl) – low voltage

led alv mr16 sign lights (xalv sl) – low voltage
LED ALV MR16 SIGN LIGHTS (XALV SL) – LOW VOLTAGE
SHIELD/LENS ASSEMBLY – Available in six combinations to maximize design flexibility.
Shield is machined from premium alloys to match housing. Lenses are tempered glass.
Select R – Recessed flat lens or F – Flush machined lens (for improved drainage).
SSDR – Short Shield – Recessed Lens; SSUF – Short Shield – Flush Lens; SCDR – Collar Shield – Recessed lens and Aqueducts; SCUA – Collar Shield – Flush
Lens and Aqueducts; S3DR – 30° Cutoff Shield – Recessed Lens; S3UF – 30° Cutoff
Shield – Flush Lens
EXPECTED LIFE - Minimum 60,000 hours, depending upon the ambient operating
temperature of the installation location.
LED MODULE - LED MR16 Low Voltage, Bi-Pin module offers a choice of 3 color
temperatures; Neutral White (4000K), Warm White (3000K) and Very Warm (2700K),
CRI>80 (nominal).
DIMENSIONS
XALV SL LED16 HO SSDR/SSUF LOW VOLTAGE
2.25”
A
2”
OPTICS / DISTRIBUTION - “HO” offers a choice of 3 beam patterns; Spot (SP) = 12°,
Narrow Flood (NF) = 21°, Flood (FL) = 41° “SS” choices are Spot (SP) = 19°, Narrow Flood
(NF) = 34°, Flood (FL) = 60°.
WIRING - Pre-wired with 250°C rated, 18 gauge, Teflon wire. 96” extended leads provided
(SL).
.63”
1”
1/2-14 NPS Stainless
Steel Mount
HOUSING - Aluminum housing is CNC machined from premium 6061-T6 alum solid bar
alloy.
XALV SL LED16 HO SCDR/SCUA LOW VOLTAGE
2.25”
A
“HO” module features 4 “field selectable” light level equivalents of 50w, 35w, 20w & 10w,
via an easily accessible push button. “SS” module features 2 “field selectable” light level equivalents of 35w or 20w, via an
easily accessible High/Low mode switch.
MOUNTING - Rear mounted arm has a ½” NPSM threaded stainless steel knuckle for
mounting to standard J-Box or mounts.
ELECTRICAL - 12V AC, 50/60 HZ input. Complies with UL8750 safety regulations and with
ANSI/IEEE C62.41 Class A operation.
2”
LED ENGINE - Provides on board circuitry that makes it compatible with 12V low voltage
magnetic or electronic transformers. Phase dimmable.
.63”
1”
1/2-14 NPS Stainless
Steel Mount
TRANSFORMER - Required and must be ordered separately. Compatible with low voltage
magnetic or electronic transformers.
XALV SL LED16 HO S3DR/S3UF LOW VOLTAGE
A
2”
1”
2.25”
OPERATING TEMPERATURE - -40°C to 55°C (-22°F to +104°F)
FINISH - Standard finishes are BRS - Bronze Smooth, WHS - White Smooth and BKS - Black
Smooth. MSV - Metallic Silver, SVG - Satin Verde Green and Graphite are textured finishes.
All finishes are in a UV resistant, thermoset polyester powder coat finish, which provides
durable protection from environmental conditions, corrosion and the elements.
30°
.63”
WARRANTY - Limited 5-year warranty.
1/2-14 NPS Stainless
Steel Mount
EXTRA VALUE FEATURES:
XALV Dimensions - (Low Voltage)
XALV SL LED16 HO SSDR / SSUF
XALV SL LED16 SS SSDR / SSUF
XALV SL LED16 HO SCDR / SCUA
XALV SL LED16 SS SCDR / SCUA
XALV SL LED15 HO S3DR / S3UF
XALV SL LED15 SS S3DR / S3UF
A
4.57" (116mm)
3.84" (98mm)
5.26" (134mm)
4.58" (116mm)
5.47" (139mm)
4.80" (122mm)
• Premium aluminum alloys protected by a chromate conversion process and polyester
powder coat finish, provide XALV Series with incredible corrosion resistance, ensuring a
long life and trouble free operation.
• Precision O-ring sealing system between the lens and housing are high temperature
silicone or Viton fluoroelastomer material, prevents dust and water ingress.
• Posi-Seal provides reliable protection against water and dirt intrusion. No RTV silicone is
used to seal XALV fixtures.
Average watts
HO
SS
• Available Spread Lenses, Color Filters, and Louvers expand performance.
12W
• Waterproof wire connectors are provided with each low-voltage luminaire.
9W
This product, or selected versions of this product, meet the standards
listed below. Please consult factory for your specific requirements.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
SHIPPING WEIGHT - 3 lbs.
ARRA
wet location Funding Compliant
Project Name
Catalog #
IP66
LISTINGS - UL listed to UL8750. Suitable for wet locations.
Fixture Type
10/21/15
© 2015
LSI INDUSTRIES INC.
LED ALV MR16 SIGN LIGHTS (XALV SL) – LOW VOLTAGE
PRODUCT ORDERING INFORMATION
TYPICAL ORDER EXAMPLE:
Prefix
Type
XALV SL LED16 HO NW NF 12V S3DR SVG CH MS24 SLB90 S75T
Light Drive
Source Current
SL - Sign1 LED16
XALV
Light
(LED ALV Low Voltage)
SS2
HO3
Color
Temp4
NW - Neutral White
(4000K)
WW - Warm
White (3000K)
VW - Very Warm
White (2700K)
Beam
Angle5
Voltage
Shield(s)
SP - Spot Flood 12V - 12 volt9 SSDR - Short Shield Recessed Lens
NF - Narrow Flood
SSUF - Short Shield FL - Flood
Flush Lens
SCDR - Collar Shield Recessed Lens Aqueducts
SCUA - Collar Shield Flush Lens Aqueducts
S3DR - 30° Cutoff Shield Recessed Lens
S3UF - 30° Cutoff Shield Flush Lens
Finish
BKS - Black Smooth
BRS - Bronze Smooth
WHS - White Smooth
SVG - Satin Verde
Green Textured
MSV - Metallic Silver
Textured
GPT - Graphite
Textured
Mounting
Accessories
NO - None
Mounting Stems
MSXX - Straight Stem (Specify Length)
18", 24", 30", & 36"
Mounting Brackets
A90 - 90° Arm Bracket
CH - Classic Hook Bracket
TMA - Twin Mount Adaptor7
SLB90 - Single 90° Sign Light Bracket
TLB90 - Twin 90° Sign Light Bracket7
Junction Box W/Xformer
S75T - Single Canopyr & J-Box
with 75w 120:12v Transformer
ACCESSORIES6
CFX16 - MR16 Color Filters8
HL16 - MR16 Hexcell Louvers
LS16 - MR16 Linear Spread Lenses
PS16 - MR16 Prismatic Spread Lenses
CC250 - 250' Spool of 12-2 stranded
Low Energy - Underground Cable
NOTES:
1. SL - Sign Lights. Sign lights have 96” extended leads for use with mounting stems & brackets.
2. 16 SS = MR16, 2-Position lamp featuring adjustable Hi/Lo switch, to replicate either 35w or 20w halogen light output levels.
3. 16 HO = MR16, 4-Position lamp featuring adjustable button, to replicate four Halogen light output levels (10w, 20w, 35w or 50w).
4. Color Temperatures; NW = 4,000K, WW = 3,000K, VW = 2,700K.
5. Beam Angle (SS): SP = 19 degree, NF = 34 degree, FL = 60 degree.
(HO): SP = 12 degree, NF = 21 degree, FL = 41 degree.
6. Only Single Accessory Can Be Installed in Shield
7. TLB90 & TMA twin mounts supplied with 2ea identical XALV SL luminaires.
8. Color Filters - Replace "X" with required filter color - R-Red, G-Green, B-Blue, Y-Yellow.
9. Transformer is required.
A90 - 90° Arm
UH - U Hook
180° Arm Bracket
Project Name
Catalog #
S75T Wall Mount with
LV Transformer
TMA - Twin
Mount Adaptor
CH - Classic Hook
SLB90 – Single 90º
Sign Light Fitting
Fixture Type
MS - Straight Stem
TLB90 – Twin 90º
Sign Light Fitting
10/21/15
© 2015
LSI INDUSTRIES INC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising