Product Specification

Product Specification
Product Specification
Product Name: RF Wireless Controller with Touching Remote
Product Model: LS-RF001
Dimensional drawing:
Please read the instructions before you use
Instruction
One package includes:one controller,one remote control(without battery)
one core-end terminal,one usage instruction.
After-sales service
We claim to offer free maintenance or change new product if any problems occur within one year.
The buyer should pay for the maintenance due to unfollowing the instructions even within one year.
The maximum duty of our company is to change the product with the same item No. and quantity if
any damage occur.
1. Incorrect operation mainly due to unfollowing instructions.
2. Damage caused by uploading, fixing,changing circuit ,connecting or changing the
chips unprofessionally.
3. Damage caused by shipping,shaking,dropping or water inflowing after buying.
4. Damage caused by natural disasters such as,earthquake,fire,flood,thundering,environmental
pollution or abnormal voltage.
5. Damage caused by high temperature,moisture,hazardous chemicals or inappropriate maintenance.
6. Our products have been updated newly.
Safe instruction
Please follow the instructions to use safely.
Attention! Operate Carefully! Please read the following tips carefully.
1, Donot install the product in areas with thundering,strong magnetic and high pressures.
2, Make sure the connection is right and firmed in case of fire accident caused by short circuit.
3, Please install the controller with ventilation to make sure the temperature is appropriate.
4, Please check whether the input voltage,power supply(constant pressure)
acord with the requirements.
5, Please donnot connect the power before connection.
6, Please contact the supplier when problems occur.Don’t maintain by yourself.
7, The Instruction is for this Item Only,no notification if any amendments.
Brief introduction
LS-RF001 is a multi-function Touching RGB LED Controller. It adopts the most advanced PWM
Ⅰ:Technical Parameters(remote control):
1. Power supply: AAA battery * 3pcs
2. Cover Material:ABS
3. Fabrication processing: multicolour printing & UV varnish
Ⅱ:Technical Parameters(controller)
1. Working voltage:DC12V/24V
2. Output control: 3 circuits(R/G/B)
3. Control current:6A/circuit
4. Connecting mathod: common anode
5. Wireless frequency:433.92MHz
6. Receiving range:20meters
Ⅲ:Functions of Keys
1. Key 1: on/off
2. Key 2: light changing mode(15 modes)
3. Key 3: color light/white light switching mode
4. Key 4: turn up(brightness/speed)
5. Key 5: turn down(brightness/speed)
Ⅳ. How to use
1. Press Key 1 to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.
3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press
4. Resume fuction. The previous settings will be resumed while power on again
Feature chart for Key 2
1
Auto color changing
2
three colors jumps to
change
3
seven colors jumps to
change
4
three colors jumps to
gradual change
5
6
7
8
8 grades of brightness to adjust by pressing Key 4 or Key 5.
9
Gree color jumps to change
10
Yellow color jumps to change
11
Cyan color jumps to change
seven colors jumps to
gradual change
12
white color jumps to change
red color jumps to
change
13
Red/blue light twinkles alternately
14
Green/blue light twinkles alternately
15
Red/green light twinkles alternately
8 grades of speed
to adjust by
pressing Key 4 or
Key 5
8 grades of
Blue color jumps to brightness to adjust
by pressing Key 4
change
or Key 5.
Purple color jumps to
change
Installation
Power supply(1)
Power supply(2)
Switching
Power Supply
Load
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising