Cleaner Coating Cutting

Cleaner Coating Cutting
Cleaner
Cutting
Coating
Dilution control
Metalworking Process Overview
Material
Dilution control
Contamination monitor
Coolants / lubricants
Dilution control
Contamination monitor
Cleaning solutions
Rust inhibitors
Products
ATAGO provides a simple solution to all aspects of metalworking fluid management.
Cutting oils
Water-soluble cleaning fluids
Water-insoluble cleaning fluids
Anti rust agents
α
OFF SET function
Cat.No.4502
Cat.No.4536
Scale : Cutting Oil
RNG : 0.0 to 70.0 (ATC)
RES : 0.1, 0.1°C
ACC : ±0.2, ±1°C
TMP : 10 to 75°C
Scale : Cleaner
RNG : 0.00 to 25.00(ATC)
RES : 0.01, 0.1°C
ACC : ±0.10, ±1°C
TMP : 10 to 100°C
OFF SET function : A conversion factor
and / or a number to add / substract may be
programmed to align the PAL readings with
titration methods.
Cat.No.3820
Scale :
RNG :
RES :
ACC :
TMP :
Brix
45.0 to 93.0% (ATC)
0.1%, 0.1°C
±0.2%, ±1°C
10 to 100°C
Reference
RNG
RES
ACC
TMP
Measurement Range
Resolution
Measurement Accuracy
Temperature compensation range
Measurement
Method
Cat.No.3840
Brix
0.0 to 85.0% (ATC)
0.1%, 0.1°C
±0.2%, ±1°C
10 to 100°C
Cat.No.4537
Scale : AntiRust
RNG : 0.00 to 25.00(ATC)
RES : 0.01, 0.1°C
ACC : ±0.10, ±1°C
TMP : 10 to 100°C
Common Specifications
Ambient
10 to 40°C
Temperature
Power Supply 2 × AAA Batteries
Approx. 11,000 measurements
Battery life
(when using alkaline batteries)
IP65 Dust-tight and Protected
International
Protection Class against water jets.
55(W)×31(D)×109(H)mm,
Dimensions
and Weight
100g (Main Unit only)
*ATC=Automatic Temperature Compensation
PAL-101S, PAL-Cleaner, and PAL-AntiRust display in
Brix, a general concentration indicator for any
aqueous solutions.
Controlling the concentration of metalworking fluids
Why choose ATAGO refractometers?
Easy operation with just two keys.
No need to read instructions.
Clearly display when fluids should
be replaced or refilled, so you do
not waste them. Cost saving!
By using fluids with the proper
concentration, equipment
problems can be prevented. It
prolongs the durability of devices.
No more errors and bothersome
measuring of titration.
Proper concentration guarantees a
good finish and good quality of
products.
Proper concentration prevents
metalworking fluids from
decomposition and deterioration.
Easy care and maintenance! Just
wiping with cloth keeps the meter
clean. Can be washed under
running water.
Electrodes of pH meters and
conductivity meters are sensitive
and generally require handling
with care. But the prism of
ATAGO refractometer is robust.
Proper concentration promises
safety and security of personnel.
All ATAGO refractometers are designed and manufactured in Japan.
Headquarters: The Front Tower Shiba Koen, 23rd Floor
2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan
http://www.atago.net/ overseas@atago.net
TEL : 81-3-3431-1943 FAX : 81-3-3431-1945
ATAGO products comply with HACCP,GMP,
and GLP system standards.
*Specifications and
appearance are subject to
change without notice.
ENV.01 14071000PP Printed in Japan
Sysmex Nederland B.V.
P.O. Box 251, 4870 AG Etten-Leur
Phone +31 (0)76 508 6000
Fax +31 (0)76 508 6086
Sysmex Belgium N.V.
Park Rozendal, Building A
Terhulpsesteenweg 6a, 1560 Hoeilaart, Belgium
Phone +32 (0)2 769 7474 . Fax +32 (0)2 769 7499
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising