SPECIFICATIONS
EZH2O® Bottle Filling Station
with Single Filtered LZ Cooler
Models LZS8WS & LZSDWS
SPECIFICATIONS
PRODUCT SPECIFICATION
Unit shall include electric water cooler with bottle filling station. LZS8WS
shall deliver 8 .GPH of 50o F drinking water at 90o F ambient and 80o F inlet
water. LZSDWS shall deliver non-chilled drinking water. Lower unit shall
have pushbar activation. Bottle filling unit shall include an electronic
sensor for touchless activation with auto 20-second shut-off timer. Shall
include Green Ticker™ displaying count of plastic bottles saved from
waste. Bottle filler shall provide 1.1-1.5 gpm flow rate with laminar flow to
minimize splashing. Shall include the WaterSentry® Plus 3000-gallon
capacity filter, certified to NSF/ANSI 42 and 53, with visual monitor to
indicate when replacement is necessary. Shall include integrated silver
ion anti-microbial protection in key areas. Unit shall meet ADA guidelines.
Unit shall be lead-free design which is certified to NSF/ANSI 61 and 372
and meets Federal and State low-lead requirements. Unit shall be certified
to UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
 Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
 Easy-touch front and side pushbar controls (Cooler)
®
 WaterSentry Plus 3000-gallon capacity Filtration System, certified to
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)
 Integrated Silver Ion Anti-microbial Protection in key areas
 Quick Fill Rate: 1.1 gpm (LZS8WS); 1.5 gpm (LZSDWS)
 Laminar Flow provides minimal splash
 Real Drain System eliminates standing water
 Visual User Interface display includes:
 Innovative Green Ticker™ counts bottles saved from waste.
 LED Visual Filter Monitor shows when replacement is necessary
™
®
 Available with Flexi-Guard StreamSaver or Vandal-resistantt bubbler
t
( includes “VR” code in model no.).
RATED FOR INDOOR USE ONLY
Models LZS8WSLK
or LZSDWSLK
Models
LZS8WSVRSK or
LZSDWSVRSK
CONSTRUCTION
COOLING SYSTEM (Models LZS8WS and LZS8WSVR)
 Stainless Steel basin with integral drain
 Galvanized structural steel cooler chassis
provides structural integrity
 Stainless steel bottle filler wrapper with ABS
plastic alcove
 Cooler cabinet available as Light Gray Granite
Vinyl Clad Steel or Stainless Steel (additional
cost) construction.
™
 Flexi-Guard® StreamSaver
Safety Bubbler
(option) utilizes an infused anti-microbial pliable
polyester elastomer to prevent accidental mouth
injuries. Flexes on impact. Lower-flow waterefficient water stream.
 Vandal-resistant bubbler (option) is one-piece,
heavy-duty chrome-plated.
 Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
 Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is
permanently lubricated.
 Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.
 Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
 Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude
requirements,
Replacement Filters: Available as Singles and
Multi-packs. Order part numbers:

51300C (single)

51300C_3PK (three)

51300C_12PK (twelve)

51300C_24PK (twenty-four)

51300C_48PK (forty-eight)
Warranty: 5 year limited warranty on the unit’s
refrigeration system. Electrical components and
water system are warranted for 12 months from
date of installation or 18 months from factory
shipment, whichever date falls first.
CAPACITIES CHART
CERTIFICATIONS / STANDARDS
 ADA Compliant
 UL399 and CAN/CSA 22.2 No. 120 Certified
(Only 115V models are certified)
 ANSI/NSF 61 and 372 Certified
 ANSI/NSF 42 and 53 Certified (Filter only)
 GreenSpec® Listed
Voltage /
Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
LZS8WS(VR)*K
115V / 60Hz
8 GPH
5.0
370
LZS8WS(VR)*2K
220V / 50Hz
6.7 GPH
2.5
370
LZS8WS(VR)*3K
220V / 60Hz
8 GPH
2.5
370
LZSDWS(VR)*K
115V / 60Hz
-
1.0
15
LZSDWS(VR)*2K
220V / 50Hz
-
0.5
15
LZSDWS(VR)*3K
220V / 60Hz
-
0.5
15
Model
Approx.
Ship
Wt.
88
58
*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels
**Based on 80oF inlet water & 90oF ambient air temp for 50oF chilled drinking water.
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specifications without notice. Please visit elkayusa.com
for the most current version.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
Elkayusa.com
This specification describes an Elkay product with design,
quality and functional benefits to the user. When making a
comparison of other producer’s offerings, be certain these
features are not overlooked.
© 2013 Elkay
14-57E
(Rev 02/2013)
EZH2O® Bottle Filling Station
with Single Filtered LZ Cooler
Models LZS8WS & LZSDWS
ROUGH-IN
IMPORTANT!
INSTALLER PLEASE NOTE:
These units are designed and built to provide water to the
user which has not been altered by materials in the cooler
waterway. The grounding of electrical equipment such as
telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building but may also
occur away from the building. This grounding can cause
electrical feedback into a water cooler creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by
installing the cooler using the proper materials as shown.
17 7/8
454mm
7
178mm
7/16 O
11mm
MOUNTINGHOLES
(6)
*Rated for indoor use only
7
178mm
3 9/16
90mm
18 13/16
478mm
15
381mm
NOTICE
.
This water cooler must be connected to the water supply
using a dielectric coupling. The cooler is furnished with a nonmetallic strainer which meets this requirement. The drain trap
which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system
Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8 O.D. unplated copper tube. 3” (76mm) maximum out from wall.
B = Recommended Waste Outlout location. To accommodate 1-1/4” nominal drain.
Drain stub 2” out from wall.
C = 1-1/4” Trap (not furnished)
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearnat from
cabinet louvers to wall.
F = 7/16” Bolt Holes for fastening to wall.
Page 2
Job Name: _______________________________________
Date: ____________________ Qty: __________________
Contact Info (Name, Phone, Email): ____________________
_________________________________________________
_________________________________________________
Approval: _________________________________________
© 2013 Elkay
(Rev 02/2013)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising