View product installation instructions for
Custom Dynamics® Dynamic Ringz™
Installation Instructions
Custom Dynamics® Dynamic Ringz™
Installation Instructions
We thank you for purchasing Custom Dynamics® Dynamic Ringz™
Amber/White LED turn signal clusters! Our Genesis LED’s offer
maintenance free service and higher visibility. We offer one of the best
warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynamics at 1(800)382-1388.
We thank you for purchasing Custom Dynamics® Dynamic Ringz™
Amber/White LED turn signal clusters! Our Genesis LED’s offer
maintenance free service and higher visibility. We offer one of the best
warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynamics at 1(800)382-1388.
NOTE: This product is designed for dual intensity front turn
signal fitment only. They will not function properly in the rear.
NOTE: This product is designed for dual intensity front turn
signal fitment only. They will not function properly in the rear.
Instructions
1. Remove lens from turn signal housing.
2. Determine the tap in point for ground, running and turn signal wires.
3. Route wires through turn signal housing as needed.
4. Attach the Black wire from the cluster to the turn signal ground.
5. Attach the White wire from the cluster to the running light wire.
6. Attach the Yellow wire from the cluster to turn signal wire.
Instructions
1. Remove lens from turn signal housing.
2. Determine the tap in point for ground, running and turn signal wires.
3. Route wires through turn signal housing as needed.
4. Attach the Black wire from the cluster to the turn signal ground.
5. Attach the White wire from the cluster to the running light wire.
6. Attach the Yellow wire from the cluster to turn signal wire.
7. If needed, secure cluster to housing with 3M Tape or clear silicone.
8. Reinstall lens.
9. Check operation of turn signal in all modes.
7. If needed, secure cluster to housing with 3M Tape or clear silicone.
8. Reinstall lens.
9. Check operation of turn signal in all modes.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
03-2016SM
Custom Dynamics® Dynamic Ringz™
Installation Instructions
03-2016SM
Custom Dynamics® Dynamic Ringz™
Installation Instructions
We thank you for purchasing Custom Dynamics® Dynamic Ringz™
Amber/White LED turn signal clusters! Our Genesis LED’s offer
maintenance free service and higher visibility. We offer one of the best
warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynamics at 1(800)382-1388.
We thank you for purchasing Custom Dynamics® Dynamic Ringz™
Amber/White LED turn signal clusters! Our Genesis LED’s offer
maintenance free service and higher visibility. We offer one of the best
warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynamics at 1(800)382-1388.
NOTE: This product is designed for dual intensity front turn
signal fitment only. They will not function properly in the rear.
NOTE: This product is designed for dual intensity front turn
signal fitment only. They will not function properly in the rear.
Instructions
1. Remove lens from turn signal housing.
2. Determine the tap in point for ground, running and turn signal wires.
3. Route wires through turn signal housing as needed.
4. Attach the Black wire from the cluster to the turn signal ground.
5. Attach the White wire from the cluster to the running light wire.
6. Attach the Yellow wire from the cluster to turn signal wire.
Instructions
1. Remove lens from turn signal housing.
2. Determine the tap in point for ground, running and turn signal wires.
3. Route wires through turn signal housing as needed.
4. Attach the Black wire from the cluster to the turn signal ground.
5. Attach the White wire from the cluster to the running light wire.
6. Attach the Yellow wire from the cluster to turn signal wire.
7. If needed, secure cluster to housing with 3M Tape or clear silicone.
8. Reinstall lens.
9. Check operation of turn signal in all modes.
7. If needed, secure cluster to housing with 3M Tape or clear silicone.
8. Reinstall lens.
9. Check operation of turn signal in all modes.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
03-2016SM
03-2016SM
Black = Ground
White= Outer White( Constant power)
Yellow = Amber Turn (Turn Signal)
Vehicle Running
Vehicle Ground
Yellow
Vehicle Ground
Connection Points
White
Connection Points
Vehicle Turn
Vehicle Running
Yellow
Wiring Diagram
Black = Ground
White= Outer White( Constant power)
Yellow = Amber Turn (Turn Signal)
Black
Wiring Diagram
White
Installation Instructions Page 2
Black
Installation Instructions Page 2
Vehicle Turn
Note: If you experience fast flashing from your turn signals after installation, it is due to the reduced load on the turn signal flasher. It is recommended to either change to a non-load dependent flasher if possible, or to add a load equalizer. Contact us for details.
Note: If you experience fast flashing from your turn signals after installation, it is due to the reduced load on the turn signal flasher. It is recommended to either change to a non-load dependent flasher if possible, or to add a load equalizer. Contact us for details.
Installation Instructions Page 2
Wiring Diagram
Black = Ground
White= Outer White( Constant power)
Yellow = Amber Turn (Turn Signal)
Black = Ground
White= Outer White( Constant power)
Yellow = Amber Turn (Turn Signal)
Vehicle Running
Vehicle Ground
Yellow
Vehicle Ground
Connection Points
White
Connection Points
Black
Wiring Diagram
Vehicle Turn
Vehicle Running
Yellow
Installation Instructions Page 2
White
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Black
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Vehicle Turn
Note: If you experience fast flashing from your turn signals after installation, it is due to the reduced load on the turn signal flasher. It is recommended to either change to a non-load dependent flasher if possible, or to add a load equalizer. Contact us for details.
Note: If you experience fast flashing from your turn signals after installation, it is due to the reduced load on the turn signal flasher. It is recommended to either change to a non-load dependent flasher if possible, or to add a load equalizer. Contact us for details.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising