Spectrel 12200/336 - Copenhagen Sensor Technology

Spectrel 12200/336 - Copenhagen Sensor Technology
Spectrel 12200/336
Medium-Range Zoom Camera System
Datasheet
Features
 Highly
sensitive colour CCD camera
day/night operation
 Zoom lens 11 to 200 mm (18x)
 Heat haze reduction
 Precise boresight retention
 Graphical overlays
 Configuration by serial interface
 True
Description
The Spectrel 12200/336 System is an integrated unit, based
on a highly sensitive colour CCD camera and a powerful zoom
lens, ideal for day/night coastal surveillance, camp perimeter
protection, protecting sensitive infrastructures and similar
applications.
It is designed to deliver high-performance images, even under
the harshest conditions such as temperatures ranging from 40°C to +70°C and severe shock and vibration.
Optical system
The optical system was developed specifically for use in long
range surveillance. It features continuous zoom, with
powerful zoom ratio of 11 to 200 mm, auto-iris and focus
adjustment from 1.5 m to infinity.
The “Auto-Focus on Demand” lets the camera control the
focus by the push of a button.
The lens design incorporates oil-free, low-friction surfaces
with special coatings, high-speed motors with zero back-lash
and high-precision feedback potentiometers. This design was
chosen with the objective of meeting the highest standards
for precision and accuracy and low failure rates.
All lens elements are surface coated for high response
throughout the visible spectrum.
True Day/Night mode operation
The Spectrel 12200/336 has an integrated movable IR-cut
filter that allows capture of colour images with high image
fidelity during day-time and crisp monochrome images during
low light level conditions. In night mode operation the IR-cut
filter is moved out of the optical path, with increased
sensitivity (also in Near-IR) as a result.
Graphic overlays
The system has a built-in graphic overlay generator that
allows arbitrary graphic overlays to be inserted into the image
output. Typical overlays are text strings, showing azimuth,
elevation, GPS data or status of weapon systems and symbols,
such as hair crosses or other reticles. Programming the
graphic overlay engine is done via the RS-422 / CAN-BUS
interface. Graphic overlays can be customized to suit specific
user requirements.
Below are typical examples of graphic overlays.
Stay on target with precise boresight retention
The factory pre-aligned boresight, is aligned in parallel with
the optical reference axis of the system. This makes for easy
on-site installation.
Typical boresight retention in NFOV is ±0.2 milliradians, the
equivalent to staying within a target area of 0.2 m, at a
distance of 1 km in NFOV.
Fog penetration
The fog penetration function is designed to automatically
increase visibility under conditions such as fog, haze and fire
smoke. The camera continuously analyses the picture and
once it detects a low-contrast condition, it will automatically
enhance the contrast.
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/date
Author
I04-000-D00
C / May 2016
XB
Spectrel 12200/336
Medium-Range Zoom Camera System
Datasheet
Digital Noise Reduction (DNR)
Expanded Hi-Dynamic Range (XDR)
The Digital Noise Reduction in the Spectrel 12200/336 camera
system is a function that analyses the video image and
reduces the noise, particularly in low-light conditions. The
analysis is based on a 2- and 3-dimensional algorithm.
XDR is useful in conditions where there are large variations in
brightness in the picture, i.e. when there are very dark
and very bright areas in the picture. XDR amplifies the signal
level in dark areas and reduces it in very bright areas thereby
improving the visibility in the picture.
Reduction of heat haze disturbance
With the Heat haze function turned on, you get a more stable
and clear image since the function reduces the disturbance of
heat waves that blurs the image.
DRI calculation
Conditions for SSIP CAM program: Visual band 400-1000nm, Contrast=30 %, Over cast daylight, Sky ratio=3, Visibility 80 km, 50 % probability.
NFOV 1.4° (H)
Man target (0,45 x 1,7 m)
Vehicle target (2,3 x 2,3 m)
Detection
11.2 km
31.8 km
Recognition
2.9 km
10.8 km
Identification
2.2 km
8.5 km
Mechanical outline and dimensions
Front view
Side view
Rear view
Bottom view
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/date
Author
I04-000-D00
C / May 2016
XB
Spectrel 12200/336
Medium-Range Zoom Camera System
Datasheet
Specifications
PAL
Camera System
Sensor
Effective pixels (H x V)
Aspect ratio
Video output
Video resolution, CVBS
Sensitivity
Spectral response
NTSC
High sensitivity 1/3” CCD sensor with complementary mosaic
976 x 582
976 x 494
4:3
Composite CVBS and YC, 1 Vpp, 75 ohm
560 TVL (15% video modulation, with lens in WFOV)
0.015 Lux, 25% video, F1.9, WFOV, No IR-cut filter
400-700nm with IR-cut filter on (day mode / with IR-cut filter)
400-950nm with IR-Cut filter off (night mode / no IR-cut filter)
> 52 dB, AGC off
2:1 Interlace
15.625 kHz
15.734 kHz
50 Hz
59.94 Hz
11 – 200 mm zoom (18x)
Narrow: Hor. 1.4°, Vert. 1° / Wide: Hor. 25.1°, Vert.18.9°
1.5 m to ∞
f/1.9 to 22 @ WFOV
≤ 5 sec. (25°C, both ways, Wide to Narrow FOV)
≤ 8 sec. (25°C, both ways, 1.5 m to ∞)
Signal to Noise ratio
Scanning system
Horizontal frequency
Vertical frequency
Focal length
Field of view
Focus range
Iris range
Zoom control, travel time
Focus control, travel time
Functions
Electronic shutter, fixed
Gamma correction
Automatic Gain Control. range
Continuous Digital Zoom
White balance
Day/night mode
Lens Iris control
Integration mode
Noise reduction
Heat haze reduction
Fog Penetration
Auto focus
Extern video input
Video overlays
Configuration, serial interface
1/50 to 1/40,000 sec.
1/60 to 1/40,000 sec.
0.45 / 1.0
Max 36 DB Analog + 6 DB DGC
x2
Automatic, Tracking
Movable IR-cut filter for proper colour (day) and Monochr. + NIR (night) rendering
Automatic
Up to 64 fields exposure time, for low light level imaging
2D and 3D Digital Noise Reduction 2 Levels
On and off function
Image contrast enhancement 3 Levels
On demand, Zoom-triggered
CVBS
On screen text and reticles (customizable)
RS-422 interface(galvanic separation), VISCA/CST protocol
(optional CAN-BUS with CST protocol)
Mechanical
Overall dimensions (W x H x L)
Net weight
Housing material
Protective housing integrity
Connector (power, data, control)
Bore-sighting retention
Environmental
Operating voltage
Power consumption
Operating temperature
Storage temperature
Vibration
120 x 123 x 300 mm (excl. connectors, mounting studs & sunshield)
< 6 kg
Aluminium with corrosion protection coating
IP 67
22-pin circular - In accordance with MIL 38999
±0.2 milliradians @ NFOV
15 to 36VDC (power supply ground isolated from camera housing)
< 15W
-40°C to +70°C
-40°C to +70°C
MIL STD 810F, tracked vehicle 5.7G-rms, 45 min each direction MIL STD 810F,
method 514.5, procedure 6
3 shocks in each direction, 30G @ 11ms
Shock
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/date
Author
I04-000-D00
C / May 2016
XB
Spectrel 12200/336
Medium-Range Zoom Camera System
Datasheet
About Us
CST - Copenhagen Sensor Technology A/S is a privately held Danish company specialising in the
design and manufacture of high-performance electro-optical solutions for demanding battlefield
and surveillance applications.
Founded in 2001, CST has rapidly grown to a mature organisation, capable of serving a global
customer base. In modern facilities on the outskirts of Copenhagen, Denmark, CST houses R&D,
production, QA and sales and marketing functions. With a collective experience in CCD camera,
optics, electronics and software development, the highly skilled staff at CST is committed to creating
rugged, durable and innovative electro-optical solutions.
CST is certified to ISO 9001:2008, which applies to the whole process flow of design, development,
manufacturing and testing. Furthermore, ISO 10007:2003 configuration management standards are
used as a guideline for design and development activities. CST products are not restricted by ITAR.
Customer and OEM solutions
CST has a long tradition of working closely with its customers, identifying unmet needs and
creating solutions with sustainable value for the users.
With a strong R&D base at the headquarters in Denmark, CST is able to provide mechanical, optical,
software and hardware customisations while meeting the toughest requirements for military,
homeland security and high-end surveillance applications.
Whether the need calls for a ruggedized high-precision zoom lens or a highly sensitive CCD camera,
or a complete system comprising lens, camera and advanced video processing, CST can offer a fasttrack design process. Contact us to discuss your specific requirements. Together we can create a
solution that provides the best price and performance ratio.
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/date
Author
I04-000-D00
C / May 2016
XB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising