Actuated Ball Valve Assemblies

Actuated Ball Valve Assemblies
Actuated
Ball Valve
Assemblies
A Series Pneumatic Actuators
 ISO 5211 Compliant
 90° and 180° Actuators


Standard and Custom Assemblies
Solenoids , limit switches, position sensors
and other accessories
www.mySSPusa.com
At SSP, we are proud to be an American manufacturing success story.
100% of our products are made in America. All of our manufacturing and
assembly is performed in our 165,000 sq. ft. facility located near Cleveland,
Ohio. Our facility is the largest vertically integrated, single-site operation in the
industry. In addition to manufacturing and assembly, we have closed die
forging, tool & die design, product engineering and testing operations
under the same roof with customer service and management.
Made in America is good business. Not only do we make everything in America,
we take extraordinary measures to use American suppliers whenever possible.
Buying American allows us to have better quality control and a more reliable
supply chain. We can work more closely within our walls and with our suppliers
to improve quality, reduce costs, and shorten lead times, which means faster
service and better products for you.
Table of Contents
Introduction ............................................. 3
Actuator Options ................................... 10
Product Features...................................... 4
Solenoids ................................................11
Ordering Information................................ 5
Limit Switches ........................................12
Actuated EB Series Valves ...................... 6
Actuators ................................................13
Actuated TB Series Valves ......................8
Special Order Guide ............................... 14
Actuated FB Series Valves ..................... 9
Actuated Ball Valve Assemblies
SSP will provide assembled automated valve packages for SSP EB, FB and TB series ball valves. Actuators are available
in 90° and 180° double acting, spring to open, spring to close and spring to center actions with a wide variety of solenoids,
limits switches, position sensors and other accessories to meet your applications’ requirements. Packages are engineered
from components selected specifically for each valve. SSP can also provide packages with customer-specified actuators,
solenoids, limit switches and other components.
03
Why Choose SSP
Automated Valve Assemblies
SSP provides actuated ball valve assemblies for SSP EB, TB and
FB Series ball valves. SSP assemblies are:
• Fast - SSP has many of the most commonly used
components ready for assembly and shipment.
• Single source - SSP stands behind the entire assembly
including the valve, hardware, and accessories.
• Reliable - Whether your assembly is built with standard
or custom components, all automation components and
accessories are selected to maximize the performance of
the valve. All assemblies are factory tested to ensure that
they function as expected.
unique needs of your application or provide automated
valves assembled with customer specified actuators
and accessories.
www.mySSPusa.com
• Flexible - SSP can locate components to meet the
Product Features
SSP offers a variety of options for automated valve assemblies. SSP can help you specify
options that will enable your actuated assembly to meet the performance requirements of your
application. Features include:
•
•
•
•
•
•
•
•
Compact Size
90° and 180° dual acting and spring return actuation
including a variety of 3-way flow path options
Single and dual mounted valve assemblies
Variety of anodized and corrosion proof coated
aluminum and stainless steel housings
High temperature and low temperature actuated
assemblies available
Wide range of solenoids, limit switches, brackets and
other accessories
Custom assemblies available
Lifetime Limited Warranty
Actuator Technical Information
Specifications
Component
Standard
High Temperature
Low Temperature
Super-Low Temperature
Material
Housing
Anodized Aluminum
Pinion
Nickel Plated Carbon Steel
Endcaps & Piston
Epoxy Coated Die Cast Aluminum
Fasteners
304 Stainless Steel
Spring Cartridges
Epoxy Coated Steel w/ Technopolymer Cartridge
Skates & Wear Bearings
Technopolymer
O-rings
04
NBR
(-4 TO 176°F)
FKM
(-10 to 300°F/ 350°F cyclic)
VMQ
(-49 to 300°F/ 350°F cyclic)
5211 Mounting
Bracket & Coupling
316 Stainless Steel
Operating Pressure
60 to 120 PSIG
Max Pressure Rating
150 PSIG
Valve Mounting
ISO 5211
Accessory Mounting
NAMUR VDI/VDE 3845
FVMQ
(-67 to 300°F/ 350°F cyclic)
Actuator Technical Information
Weight & Air Consumption
Double Acting
Spring Return
Actuator Model
Weight
(lbs)
Air Consumption
(cu-in)
Weight
(lbs)
Air Consumption
(cu-in)
AM10
1.06
4.03
N/A
N/A
AM15
2.00
13.50
2.18
8.00
AM20
2.76
15.26
3.00
6.10
AM25
3.52
25.60
3.94
11.20
AM35
5.17
44.40
6.00
18.10
Ordering Information
Below are ordering instructions for the SSP valve automation program. SSP has access to many suppliers of actuators and
valve automation accessories. If you require specific actuators and accessories for your valve automation packages please
contact your authorized SSP instrumentation distributor or SSP Customer Service at CustomerService@mySSPusa.com.
05
Port Numbering
Ordering instructions
throughout this catalog
will refer to the port
numbers in this
illustration.
1
2
1
1
2
2
3
Ordering Instructions
1
2
3
5
Locate the Actuator Selection Table for the valve series you wish to actuate (see pages 6 - 9) and
select the actuator based on the valve size, and actuation mode. Add the designator to the valve part
number Example: 43GD4-316-AM15NO2 (see page 6 under 43 spring return, normally open actuators).
Add any options to the actuator designator (see page 10). Example: 43GD4-316-AM15NO2HT for high
temperature actuators.
If required, select a solenoid type from the Solenoid Selection Table on page 11, then add the
designator to the part number.
Example: 43GD4-316-AM15NO2HTS6 for a 24 V (dc) intrinsically safe solenoid.
If required, select a limit switch from Ordering Information on page 12, then add the designator to the
part number. Example: 43GD4-316-AM15NO2HTS6L2B for NEMA 4 limit switch.
www.mySSPusa.com
4
Select the valve ordering number from the valve catalog. Example: 43GD4-316
Actuated Ball Valve Assemblies
EB Series Encapsulated Ball Valves
EB Series ball valves are designed for use in analytical instrumentation and
other medium pressure applications up to 3000 psig (206 bar).
Features include:
•
One-piece packing encapsulates the trunnion-style ball eliminating dead
space to maximize purgeability for clean and accurate samples.
•
Blowout proof stem for safety.
For more information, see the EB Series Encapsulated Ball Valves Catalog.
Actuator Selection Table
From the table below, locate the Actuator Designator for the valve size and operation required.
Actuator Designator1
Valve
Size
Spring Return
Normally
Closed
Normally
Open
Actuator Part Number
Double
Acting
Normally
Closed
Normally Open
Mounting Bracket Kit Part Number
Double
Acting
Spring Return
Double Acting
Two-Way Valves
41, 42
-AM15NC2
-AM15NO2
-AM10DA
AM15NC2
AM15NO2
AM10DA
41-MB-F04-11ISO-F
41-MB-F03-9ISO-F
43
-AM15NC2
-AM15NO2
-AM10DA
AM15NC2
AM15NO2
AM10DA
43-MB-F04-11ISO-F
43-MB-F03-9ISO-F
44
-AM20NC3
-AM20NO3
-AM15DA
AM20NC3
AM20NO3
AM15DA
44-MB-F05-11ISO-F
44-MB-F04-11ISO-F
45
-AM25NC3
-AM25NO3
-AM20DA
AM25NC3
AM25NO3
AM20DA
45-MB-F05-14ISO-F
45-MB-F05-11ISO-F
Double
Acting
Spring Return
Double Acting
3-Way 90° Actuation
Spring Return Spring Return
Port 1 NC
Port 2 NC
Double
Acting
Spring Return
Port 1 NC
Spring Return
Port 2 NC
41XQS
42XQS
-AM15SR12
-AM15SR22
-AM10DA
AM15SR12-XQS
AM15SR22-XQS AM10DA-XQS
41-MB-F04-11ISO-F
41-MB-F03-9ISO-F
43XQS
-AM15SR12
-AM15SR22
-AM10DA
AM15SR12-XQS
AM15SR22-XQS AM10DA-XQS
43-MB-F04-11ISO-F
43-MB-F03-9ISO-F
44XQS
-AM20SR13
-AM20SR23
-AM15DA
AM20SR13-XQS
AM20SR23-XQS AM15DA-XQS
44-MB-F05-11ISO-F
44-MB-F04-11ISO-F
45XQS
-AM25SR13
-AM25SR23
-AM20DA
AM25SR13-XQS
AM25SR23-XQS AM20DA-XQS
45-MB-F05-14ISO-F
45-MB-F05-11ISO-F
3-Way 180° Actuation
Spring Return
Port 1 NC
Spring Return
Port 2 NC
Spring Return
to Center
Double
Acting
Spring Return Spring Return Spring Return
Port 1 NC
Port 2 NC
to Center
Double
Acting
Mounting Bracket Kit
Part Number
41X/42X
-AM25XSR1
-AM25XSR2
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
41-MB-F05-14ISO-F
43X
-AM25XSR1
-AM25XSR2
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
43-MB-F05-14ISO-F
44X
-AM25XSR1
-AM25XSR2
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
44-MB-F05-14ISO-F
45X
-AM25XSR1
-AM25XSR2
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
45-MB-F07-14ISO-F
Actuators are selected based on a minimum supply pressure of 60 psig (4.13 bar).
1
06
Actuated Ball Valve Assembly Dimensions
Valve Size
Actuator
Model
Dimensions in. (mm)
A
B
C
AM10DA
2.59
(65.8)
2.00
(50.8)
1.87
(47.5)
AM15 (NC/NO)
3.07
(78)
2.00
(50.8)
AM10DA
2.65
(67.3)
AM15 (NC/NO)
3.13
(79.5)
D
E
F
G
J
K
L
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.57
(39.9)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.05
(52.1)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.55
(39.4)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.03
(51.6)
Two-Way Valves
41/42
43
AM15DA
3.57
(90.7)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.19
(55.6)
AM20 (NC/NO)
3.51
(89.2)
2.00
(50.8)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.44
(36.6)
3.06
(77.7)
2.13
(54.1)
AM20DA
3.64
(92.5)
2.19
(55.6)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.72
(43.7)
3.34
(84.8)
2.23
(56.6)
AM25 (NC/NO)
4.27
(108.5)
2.19
(55.6)
2.64
(67.1)
6.52
(165.6)
2.15
(54.6)
3.19
(81.0)
1.31
(33.3)
1.72
(43.7)
3.60
(91.4)
2.66
(67.6)
44
45
D
XCR=8.58
*XSR=6.24
E
C
Three-Way XQS Valves 90° Actuation
41XQS
42XQS
A
AM10DA
2.59
(65.8)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.57
(39.9)
AM15 (NC/NO)
3.07
(78)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.05
(52.1)
AM10DA
2.65
(67.3)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.55
(39.4)
AM15 (NC/NO)
3.13
(79.5)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.03
(51.6)
AM15DA
3.57
(90.7)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.19
(55.6)
AM20 (NC/NO)
3.51
(89.2)
2.00
(50.8)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.44
(36.6)
3.06
(77.7)
2.13
(54.1)
AM20DA
3.64
(92.5)
2.19
(55.6)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.72
(43.7)
3.34
(84.8)
2.23
(56.6)
AM25 (NC/NO)
4.27
(108.5)
2.19
(55.6)
2.64
(67.1)
6.52
(165.6)
2.15
(54.6)
3.19
(81)
1.31
(33.3)
1.72
(43.7)
3.6
(91.4)
2.66
(67.6)
43XQS
44XQS
45XQS
ϮŵŽƵŶƟŶŐ,ŽůĞƐ
.034 (8.6) dia
B
ΎdŚƌĞĞͲtĂLJϭϴϬșĐƚƵĂƚŽƌƐKŶůLJ
07
F
G
Three-Way Valves 180° Actuation
41X/42X
43X
44X
3.67
(93.2)
2.00
(50.8)
2.82
(71.6)
9.21
(233.9)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.65
(67.3)
AM25XCR
3.67
(93.2)
2.00
(50.8)
2.82
(71.6)
13.19
(335)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.65
(67.3)
AM25XSR
3.67
(93.2)
2.00
(50.8)
2.82
(71.6)
10.85
(275.6)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.65
(67.3)
AM25XDA
3.73
(94.7)
2.00
(50.8)
2.82
(71.6)
9.21
(233.9)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.63
(66.8)
AM25XCR
3.73
(94.7)
2.00
(50.8)
2.82
(71.6)
13.19
(335)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.63
(66.8)
AM25XSR
3.73
(94.7)
2.00
(50.8)
2.82
(71.6)
10.85
(275.6)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.63
(66.8)
AM25XDA
4.17
(105.9)
2.00
(50.8)
2.82
(71.6)
9.21
(233.9)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.79
(70.9)
AM25XCR
4.17
(105.9)
2.00
(50.8)
2.82
(71.6)
13.19
(335)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.79
(70.9)
AM25XSR
4.17
(105.9)
2.00
(50.8)
2.82
(71.6)
10.85
(275.6)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.79
(70.9)
AM25XDA
4.50
(114.3)
2.19
(55.6)
2.82
(71.6)
9.21
(233.9)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.72
(43.7)
3.71
(94.2)
2.89
(73.4)
AM25XCR
4.50
(114.3)
2.19
(55.6)
2.82
(71.6)
13.19
(335)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.72
(43.7)
3.71
(94.2)
2.89
(73.4)
AM25XSR
4.50
(114.3)
2.19
(55.6)
2.82
(71.6)
10.85
(275.6)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.72
(43.7)
3.71
(94.2)
2.89
(73.4)
L
J
K
www.mySSPusa.com
45X
AM25XDA
TB Series Trunnion Ball Valves
TB Series trunnion ball valves provide positive shut-off and directional
flow control for systems with working pressures up to 10,000 psig and
temperatures from -40 to 450°F (-40 to 232°C). Features include:
• Trunnions stabilize the ball for a tight seal at high and low pressures.
• Spring-loaded seat carriers independently apply pressure to the seats to
provide leak-tight shut off at high and low pressures and compensate for
seat wear.
• Bottom-loaded, blowout proof stem for safety and reliability.
For more information, see the TB Series Trunnion Ball Valves catalog.
Actuator Selection Table
From the table below, locate the Actuator Designator for the valve size and operation required.
Actuator Designator1
Valve
Size
Actuator Part Number
Spring Return
Normally
Closed
Double Acting
Normally
Open
Normally
Closed
Normally
Open
Mounting Bracket Kit Part Number
Double
Acting
Spring Return
Double Acting
Two-Way Valves
83/H83
-AM15NC2
-AM15NO2
-AM10DA
AM15NC2
AM15NO2
AM10DA
83-MB-F04-11ISO-F
83-MB-F03-9ISO-F
L83
-AM20NC3
-AM20NO3
-AM10DA
AM20NC3
AM20NO3
AM10DA
83-MB-F05-11ISO-F
83-MB-F03-9ISO-F
LH83
-AM20NC3
-AM20NO3
-AM15DA
AM20NC3
AM20NO3
AM15DA
83-MB-F05-11ISO-F
83-MB-F04-11ISO-F
Three-Way Valves
Actuator Designator
Actuator Part Number
1
Valve
Size
Spring
Return
Port 1 NC
Spring
Return
Port 2 NC
Spring
Return to
Center
83X/L83X
-AM25XSR1
-AM25XSR2
H83X/LH83X
-AM25XSR1
-AM25XSR2
Mounting
Bracket Kit Part
Number
Double
Acting
Spring
Return
Port 1 NC
Spring
Return
Port 2 NC
Spring
Return to
Center
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA 83-MB-F05-14ISO-F
-AM25XCR
-AM25XDA
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA 83-MB-F05-14ISO-F
Double
Acting
Actuators are selected based on a minimum supply pressure of 60 psig (4.13 bar).
1
D
XCR=8.58
*XSR=6.24
Actuated Ball Valve Assembly Dimensions
Valve Size
Actuator
Model
E
C
Dimensions in. (mm)
A
B
C
D
E
F
G
J
K
L
Two-Way Valves
AM10DA
2.97
(75.4)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.67
(42.4)
AM15 (NC/NO)
3.46
(87.9)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.16
(54.9)
AM10DA
2.97
(75.4)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.67
(42.4)
AM20 (NC/NO)
3.40
(86.4)
2.00
(50.8)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.44
(36.6)
3.06
(77.7)
2.10
(53.3)
AM15DA
3.46
(87.9)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.16
(54.9)
AM20 (NC/NO)
3.40
(86.4)
2.00
(50.8)
2.54
(64.5)
6.30
(160)
2.15
(54.6)
2.76
(70.1)
1.14
(29)
1.44
(36.6)
3.06
(77.7)
2.10
(53.3)
AM25XDA
4.06
(103.1)
2.00
(50.8)
2.82
(71.6)
9.21
(233.9)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.76
(70.1)
AM25XCR
4.06
(103.1)
2.00
(50.8)
2.82
(71.6)
13.19
(335)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.76
(70.1)
AM25XSR
4.06
(103.1)
2.00
(50.8)
2.82
(71.6)
10.85
(275.6)
2.15
(54.6)
3.35
(85.1)
1.37
(34.8)
1.44
(36.6)
3.43
(87.1)
2.76
(70.1)
83/H83
L83
LH83
A
ϮŵŽƵŶƟŶŐ,ŽůĞƐ
.034 (8.6) dia
B
ΎdŚƌĞĞͲtĂLJϭϴϬșĐƚƵĂƚŽƌƐKŶůLJ
F
G
Three-Way Valves 180° Actuation
83X/H83X
L83X/LH83X
08
L
J
K
FB Series Multipurpose Ball Valves
FB Series valves are multipurpose ball valves designed for demanding
applications having high-cycle, dynamic pressures up to 6000 psig (413 bar),
extended temperature ranges from -40 to 400° F (-40 to 206° C), flow coefficients
up to 13.8 and end connections up to 1 in.
The live-loaded floating ball design:
• Allows the valve to seal independent of upstream pressure.
• Compensates for seat wear.
• Reduces actuation torque.
The end-screw design enables system designers to configure valves with a wide
range of end connection types and sizes.
For more information, see the FB Series Ball Valves catalog.
Actuator Selection Table
From the table below, locate the Actuator Designator for the valve size and operation required.
Actuator Part Number
Actuator Designator1
Valve
Size
Spring Return
Normally Closed Normally Open
Mounting Bracket Kit Part Number
Spring Return
Double
Acting
Normally Closed Normally Open
Double
Acting
Spring Return
Double Acting
Two-Way Valves
36/L36
-AM15NC2
-AM15NO2
-AM10DA
AM15NC2
AM15NO2
AM10DA
36-MB-F04-11ISO-F
36-MB-F03-9ISO-F
38
-AM25NC3
-AM25NO3
-AM15DA
AM25NC3
AM25NO3
AM15DA
38-MB-F05-14ISO-F
38-MB-F04-11ISO-F
L38
-AM35NC3
-AM35NO3
-AM25DA
AM35NC3
AM35NO3
AM25DA
38-MB-F05-17ISO-F
38-MB-F05-14ISO-F
09
Actuators are selected based on a minimum supply pressure of 60 psig (4.13 bar).
1
D
E
Actuated Ball Valve Assembly Dimensions
Valve Size
Actuator
Model
C
Dimensions in. (mm)
A
B
C
D
E
F
G
J
K
L
Two-Way Valves
2.64
(67.1)
2.00
(50.8)
1.87
(47.5)
3.94
(100.1)
1.56
(39.6)
2.00
(50.8)
0.90
(22.9)
1.44
(36.6)
2.54
(64.5)
1.55
(39.4)
36/L36
AM15 (NC/NO)
3.13
(79.5)
2.00
(50.8)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.44
(36.6)
3.04
(77.2)
2.03
(51.6)
38
AM15DA
3.96
(100.6)
2.19
(55.6)
2.58
(65.5)
4.68
(118.9)
2.15
(54.6)
2.62
(66.5)
1.02
(25.9)
1.72
(43.7)
3.32
(84.3)
2.29
(58.2)
38
AM25 (NC/NO)
4.33
(110)
2.19
(55.6)
2.64
(67.1)
6.52
(165.6)
2.15
(54.6)
3.19
(81)
1.31
(33.3)
1.72
(43.7)
3.60
(91.4)
2.66
(67.6)
L38
AM25DA
4.33
(110)
2.19
(55.6)
2.64
(67.1)
6.52
(165.6)
2.15
(54.6)
3.19
(81)
1.31
(33.3)
1.72
(43.7)
3.60
(91.4)
2.66
(67.6)
L38
AM35 (NC/NO)
4.52
(114.8)
2.19
(55.6)
3.13
(79.5)
6.96
(176.8)
2.15
(54.6)
3.70
(94)
1.59
(40.4)
1.72
(43.7)
3.82
(97)
2.85
(72.4)
B
F
G
L
J
K
www.mySSPusa.com
AM10DA
36/L36
A
ϮŵŽƵŶƟŶŐ,ŽůĞƐ
.034 (8.6) dia
Actuator Options and Accessories
Temperature
Mounting Brackets
To order actuators for other temperature
ranges, add the designator from the table
below to the part number.
Example: L36PD4-AM15NC2LT
Option
Temperature
Range
Designator
Standard
-4 to 176°F
(-20 to 80°C)
Blank
High Temperature
-10 to 300°F / 350°F Cyclic
(-23 to 148° C / 176°C Cyclic)
HT
Low Temperature
-49 to 300°F / 350°F Cyclic
(-45 to 148°C/ 176°C Cyclic)
LT
Super-Low Temperature
-67 to 300°F / 350°C Cyclic
-55 to 148°C / 176°C Cyclic
SLT
Corrosion-Resistant Housing
The standard housing material is anodized
aluminum. A range of corrosion resistant coated
and stainless steel housings and end caps are
available. Contact you local authorized SSP
distributor or SSP Customer Service for
more information.
Dual Mounted Assemblies
Dual mounted assemblies, which place two valves
on one actuator are available on
• EB Series sizes 42 and 43
• FB Series size 36
• All TB Series valves
Contact your authorized SSP distributor or
SSP Customer Service for more information.
Customer-Specified Assemblies
SSP can provide actuated ball valve assemblies
using customer-specified components. Customers
can provide components for assembly, or SSP can
source the required components from a wide range of
manufacturers.
10
ISO 5211 mounting brackets and couplings are
specified in the actuator selection tables for each
valve series. The standard offering is based on
ISO style couplings with fractional mounting
hardware. DIN style couplings with metric
mounting hardware are available.
Fusible Plugs
Fusible plugs provide a means of emergency
venting which depends only on temperature.
Plugs are designed to melt and blow out at a
predetermined temperature, venting both the
supply air and actuator pressure to atmosphere,
causing the valve to cycle to a failsafe position.
Contact your authorized SSP distributor or SSP
Customer Service for more information.
Position Sensor
To order a position sensor in your assembly, add
the designator from the table below to the
part number.
Example: 43GD4-316-AM15NO2S1P1
Type
Designator
Pepperl & Fuchs NBN3-F25-E9-V1
P1
Pepperl & Fuchs NCN3-F25-N4-V1
P2
Vent Protector
(Mud Dauber) Fittings
Vent protector fittings for exhaust or unused
actuator and solenoid ports can be ordered
separately. Part Number: ISST4MD
Solenoids
SSP offers solenoid valves with NAMUR style mounting for use in either
double acting or spring return actuators. They are available in single coil,
dual coil, or 3-position configurations. Solenoid valves are available in
compliance with intrinsically safe and explosion proof environments. Low
voltage solenoids and other options are available.
Specifications
Feature
Standard
Direct Mount Standard
NAMUR
Body
Powder Epoxy Coated Aluminum
•
Standard Duty
Spool
Anodized Aluminum
•
Intrinsically Safe
Spring
Stainless Steel
•
Explosion Proof
Seals
NBR
Coil Class
Class F Standard Duty
Wiring Connections
1/2 in. NPT or 1/4 in. Cable Gland
Operation
3-way or 4-way air piloted
Ambient Temp. Range
-4 to 158° F
Enclosure Rating
IP65
Voltage
120 and 220V AC, 24 VDC,
12VDC/24 VAC and 230 VAC/125 VDC
Manual Overdrive
Lockable
Pressure Rating
0 to 120 psig
Flow Coefficient
1.1
Certifications1
UL/CSA, ATEX
Features
• Configuration
• Single, dual, or 3 position
• Can be used with lubricated or non-lubricated air
• Standard lockable manual override button
• Water and dust proof - IP65
Options
• Intrinsically safe and explosion proof
11
• High temp. FKM seals
• IP67 watertight kit
• Stainless steel body
• Lighted and molded DIN connectors
• Class H coils
• 3-way and 4-way adapter plates
• Dual coil and 3 position
• Low voltage options
Certifications vary by solenoid.
1
Ordering Information
To order solenoids locate the designator for the
required voltage and duty in the table below, then
add it to the part number.
Example: 43GD4-316-AM15NO2HTS6
Solenoid Kits. Left-pilot solenoid kits are standard.
For right-pilot solenoid kits add R, for dual coil add
D after the Kit Part Number. Example: SVK-S1R
Voltage/Duty
Kit Part Number
S1
120 V (ac) / NEMA 4, 4X
SVK-S1
S2
24 V (dc) / NEMA 4, 4X
SVK-S2
S3
220 V (ac) / NEMA 4, 4X
SVK-S3
S4
12 V (dc) / NEMA 4, 4X
SVK-S4
S5
120 V (ac) / NEMA 7, 9
SVK-S5
S6
24 V (dc) / Intrinsically Safe
SVK-S6
Add the designator below before the solenoid
designator. Example: CS2
Type
(2-way / 3-way 90° & 180°)
Designator
Energize to Open / Open Port 1
C
Energize to Close / Close Port 1
O
Dual Coil
D
Other Options
Add the designator below after the solenoid
designator in alphabetical order.
Example: S6A
Type
Designator
ATEX Certification
A
UL/CSA Certification
C
High Temperature (250°F/300°F cyclic)
HT
Stainless Steel Body
S
www.mySSPusa.com
Designator
Double-Acting Actuator
Limit Switches
SSP offers limit switches for applications requiring that the position/status
of the actuator be monitored from a remote location. SSP offers NEMA 4
Type 1, 2, 3, 4, 4X, general purpose watertight and NEC Class 1 (NEMA 7),
Division1, Groups C and D, and NEC Class II (NEMA 9), Division 1, Groups E,
F, G watertight and explosion proof switches.
Features
• Compact Design
• Quick Set Cams
Materials of Construction
• Easy wiring - PCB Terminal, 10 pt.
• High visibility open/close beacon
• NAMUR mounting bracket
• Captive cover bolts
Options
• Mechanical, Inductive Proximity and Magnetic Switches
Component
Standard
Enclosure
Epoxy Coated Die Cast Aluminum
Bracket
300 Series SS
Indicator
Polycarbonate
Fastener
316 SS
• IFM, Honeywell, Omron and Pepperl & Fuchs
• NEMA 4, 4X, 7, 9
• Variety of mounting brackets
• Stainless steel housing and brackets
Seals
NBR
Shaft
304 SS
Cams
ABS
Ordering Information
• Lighted and molded DIN connectors
To order limit switches for your assembly, add the
designator from the table below to the part number.
Example: 43GD4-316-AM15NO2HTS6L2B.
• Dual coil 7-8-7-9 and 7-8-9-10 circuit boards
• 3-way T-port and L-Port Beacon options
Specifications
Designator
Type
Description
L1B
Mechanical
Omron SS-5 or SSG, SPDT, 5A 250V
L1AB*
Mechanical
Omron SS-01, SPDT, 0.1A 125VAC 30VDC,
Gold Plated Contacts
L2B*
Magnetic
Magnetic Reed Hamlin
(Low Power, 5W Max)
L3B*
Inductive
IFM IS5001 DC 3 Wire
PNP Switch (10-36V, NO)
NEMA 4, 4X
Specification
Standard
Cable Entry
1/2 NPT (2)
Temperature
-4 to 176° F (-20 to 80° C) (Standard Contacts)
Terminal Strip
10 pt. single coil solenoid (7-8-7-8)
10 pt. dual coil solenoid (7-8-7-9) (Optional)
Weights
Aluminum: 1.62 lbs (0.74 kg)
Stainless Steel: 3.94 lbs (1.79 kg) (Optional)
Seals
NBR
Shaft
304 SS
Cams
ABS
NEMA 4, 4X, 7, 9
L4B
Mechanical
Omron D3V11 or Cherry D44
(250VAC/DC, 11A MAX, 50/60 HZ)
L4AB*
Mechanical
Honeywell V7, 250VAC/DC, 0.1A MAX, 50/60 HZ
Gold Plated Contacts
L5B*
Magnetic
Magnetic Reed Hamlin
(Low Power, 5W Max)
L6B*
Inductive
IFM IS5001 DC 3 Wire
PNP Switch (10-36V, NO)
*Intrinsically Safe
Limit Switch Options
Add the designator below to the limit switch designator.
S Stainless steel enclosure
D Dual Coil 7-8-7-9 circuit board
Dimensions
Limit
Switch
Model
12
C
B
Actuator Model
AM10 AM15
All Models
AM20 AM25 AM35
A
A
A
B
C
D
A
A
L1B
6.00
(151.6)
6.89
(175.0)
6.87
6.97
7.44
(174.5) (177.0) (189.0)
3.83
4.78
(97.3) (121.4)
1/2
NPT
L2B
6.48
(164.6)
7.42
(188.5)
7.41
7.50
(188.2) (190.5)
5.71
5.71
(145.0) (145.0)
1/2
NPT
7.97
202.4
A
D
2X Conduit
ŽŶŶĞĐƟŽŶ
Actuators
SSP will sell actuators for field installation on SSP
valves. To order actuators for SSP ball valves find
the part number for the valve series/size and actuator
from the Actuator Part Number tables below.
Example: AM25NC3 for a 38 Series, two-way normally
closed actuator.
Actuator Part Numbers
Valve
Series/
Size
Actuator Part Number
Normally Closed
Actuator Part Number
Valve
Series/
Size
Normally Open Double Acting
Spring Return
Two-Way Valves
3-Way 180° Actuation
41, 42
AM15NC2
AM15NO2
AM10DA
43
AM15NC2
AM15NO2
AM10DA
44
AM20NC3
AM20NO3
AM15DA
45
AM25NC3
AM25NO3
AM20DA
36/L36
AM15NC2
AM15NO2
AM10DA
38
AM25NC3
AM25NO3
AM15DA
L38
AM35NC3
AM35NO3
AM25DA
83/H83
AM15NC2
AM15NO2
AM10DA
L83
AM20NC3
AM20NO3
AM10DA
LH83
AM20NC3
AM20NO3
AM15DA
Spring Return Spring Return Spring Return
Port 1 NC
Port 2 NC
to Center
41/42
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
43
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
44
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
45
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
83/L83
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
H83/LH83
AM25XSR1
AM25XSR2
AM25XCR
AM25XDA
3-Way 90° Actuation
41XQS
42XQS
Double
Acting
13
1.18 (30.0)
(AM10 .98 (25.0))
Spring Return
Port 1 NC
Spring Return
Port 2 NC
Double
Acting
AM15SR12-XQS
AM15SR22-XQS
AM10DA-XQS
43XQS
AM15SR12-QXS
AM15SR22-XQS
AM10DA-XQS
44XQS
AM20SR13-XQS
AM20SR23-XQS
AM15DA-XQS
45XQS
AM25SR13-XQS
AM25SR23-XQS
AM20DA-XQS
4X 10-32
3.15 (80)
(AM10 1.97 (50.0))
D
F
45֩
45֩
Actuator Dimensions
Actuator
Model
ISO Flange
Size
Dimensions in. (mm)
E
B
C
D
E
F
0.35
(9)
1.42
(36.1)
10-32
-
-
AM10
F03
AM15
F04
2.80
(57.9)
0.43
(11)
1.65
(41.9)
10-32
-
-
AM20
F03/F05
2.68
(68.1)
0.43
(11)
1.42
(36.1)
10-32
1.97
(50)
1/4-20
AM25
F05/F07
3.19
(81.0)
0.55
(14)
1.97
(50)
1/4-20
2.76
(70.1)
5/16-18
AM35
F05/F07
3.86
(98.0)
0.67
(17)
1.97
(50)
1/4-20
2.76
(70.1)
5/16-18
4X 10-32
1.26
(32.0)
Port 4
Port 2
A
0.47
(12.0)
2X 1/4" NPT
(AM10 2X 1/8" NPT)
www.mySSPusa.com
A
1.78
(45.2)
B
Square
C
Special
Orders
A
B
43GD6-316
The Basic Part Numbers and Dimensions
Tables contain only the most popular valve
configurations; many other configurations are
available. Use the chart below to build part
numbers for quotation purposes.
C
-AM15NC2HT
D
S2HT
L1B
A
VALVE PART #
B
ACTUATOR
TEMPERATURE
MOUNTING
Select SSP actuator part
number from tables on pages
6-9 then add the options
designators to the part number.
Blank
HT
LT
SLT
Blank One Valve
DM
Dual Mount (2 valves)
Available on EB Series sizes 42 and 43
FB Series 36 and all TB Series valves. Contact
SSP Customer Service for actuator sizing.
C
SOLENOID
D
(From Valve Catalog)
Select the Solenoid
type and add any
option designators to
the part number.
Standard
High Temp.
Low Temp.
Super-Low Temp.
DOUBLE ACTING OPTIONS
SOLENOID TYPE
OPTIONS
C
O
D
S1
S2
S3
S4
S5
S6
A ATEX Certification
C UL/CSA Certification
HT High Temperature
SS Stainless Steel Body
Note: Only required for double acting
assemblies
Energize to Open / Open Port 1
Energize to Close / Close Port 1
Dual Coil
120 V (ac) / NEMA 4, 4X
24 V (dc) / NEMA 4, 4X
220 V (ac) / NEMA 4, 4X
12 V (dc) / NEMA 4, 4X
120 V (ac) / NEMA 7, 9
24 V (dc) / Intrinsically Safe
LIMIT SWITCH / POSITION INDICATOR
Choose either a limit switch or position indicator, then add the designator to the actuator part number.
Add limit switch option designators to the limIt switch part number.
LIMIT SWITCHES
L1B
L1AB*
L2B*
L3B*
L4B
L4AB*
L5B*
L6B*
NEMA 4, 4X
Omron SS-5 or SSG, SPDT, 5A 250V
LIMIT SWITCH OPTIONS
POSITION SENSOR
S
D
P1 NBN3-F25-E9-V1
P2 NCN3-F25-N4-V1
Stainless steel enclosure
Dual Coil 7-8-7-9 circuit board
Omron SS-01, SPDT, 0.1A 125VAC 30VDC,
Gold Plated Contacts
Magnetic Reed Hamlin (Low Power, 5W Max)
IFM IS5001 DC 3 Wire PNP Switch (10-36V, NO)
NEMA 4, 4X, 7 9
Omron D3V11 or Cherry D44 (250VAC/DC, 11A
MAX, 50/60 HZ)
Honeywell V7 (250VAC/DC, 0.1A MAX, 50/60 HZ),
Gold Plated Contacts
Magnetic Reed Hamlin (Low Power, 5W Max)
IFM IS5001 DC 3 Wire PNP Switch (10-36V, NO)
*Intrinsically Safe
Testing
All actuated assemblies are tested for proper function. All
valves are factory tested with Nitrogen to 1000 psig (69 bar)
at 70°F (20°C).
Warranty
SSP valves are backed by the SSP Lifetime Limited
Warranty. This warranty is available from your local
distributor or at www.mySSPusa.com.
Important Information
14
IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE PERSONAL INJURY
AND PROPERTY DAMAGE. It is the sole responsibility of the system designers and users to properly select and use products for their
specific applicaƟons. This document has been provided to users with technical experƟse as a reference for further invesƟgaƟon to
determine specific product needs relaƟve to their design requirements.
More SSP Products
Tube Fittings
Duolok and Griplok twoferrule and Unilok® single
ferrule tube fittings provide
leak-tight installation even
when intermixed with Swagelok®, Hoke Gyrolok® and
Valves
The FloLok valve offering includes ball, check,
metering, needle, toggle,
plug, bleed, and purge
valves for pressures up
to 10,000 psig.
Parker CPITM fittings.
Tubing
Pipe Fittings
SSP offers straight and
coiled seamless 316 stainless steel instrumentation
tubing for instrumentation,
process and utility applications.
TruFit and TruFit
10K pipe fittings are
available in a wide range
of weld, threaded and
flared connections.
Filters
Hose
FloLok in-line and teetype filters trap particles
to clean sample fluids
and protect sensitive
process and analytical
instrumentation components and equipment.
Tools &
Accessories
TruFit PTFE-lined and
flexible metal core hose
assemblies are used in
a variety of instrumentation, utility, biopharm
and other applications.
Quick Connects
SSP offers single-end
shutoff, double-end shut
off, and full-flow quick
connects for instrumentation and process
applications.
www.mySSPusa.com
SSP TurnPro professional
hand tools, power tools and
installation training make
quality tube system installation faster and easier.
15
Founded 1926
Privately owned, third generation business
Modern single-site vertically integrated manufacturing facility
DFARS-compliant raw material
ISO 9001 quality management system
ISO 17025 testing laboratory
Limited Lifetime Warranty
8250 Boyle Parkway • Twinsburg, OH 44087
330-425-4250 • www.mySSPusa.com
©2017 SSP Fittings Corp. All rights reserved.
ABVPC-010-17A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising