Digital Day/Night Vandal Resistant Dome Camera

Digital Day/Night Vandal Resistant Dome Camera
Model : VRD43/12
Digital Day/Night
Vandal Resistant
Dome Camera
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543
www.geniecctv.com
※ Please read this manual thoroughly before use.
Keep this manual handy for future reference.
Edition. GN-JUNE 2011
■ FEATURES
■ SPECIFICATION
ITEM
ㆍ 1/3" Sony Super HAD CCD
NTSC
AC24V / DC12V DC12V AC24V / DC12V DC12V
110mA(AC24V)/160mA(DC12V) 160mA 110mA(AC24V)/160mA(DC12V) 160mA
Total Pixels
811(H) x 508(V)
795(H) x 596(V)
Effective Pixels
768(H) x 494(V)
752(H) x 582(V)
Size
1/3" Sony Super HAD CCD
Scanning System
2:1 Interlace
Synchronisation
INT
Frequency
Horizontal:15.734 KHz Vertical :59.94 Hz Horizontal: 15.625 KHz Vertical : 50.00 Hz
Resolution
540TV Lines
Video Output
1.0Vp-p/75(Video 0.714Vp-p Sync 0.286Vp-p) 1.0Vp-p/75 (Video 0.7 Vp-p Sync 0.3 Vp-p)
S/N Ratio
50dB (AGC Off)
Min. Illumination
0.15Lux (40IRE)
White Balance
AWB (1,800˚K~10,500˚K)
Gain Control
ON
Iris Control
DC
Shutter Speed
Fixed (1/50)
Lens
Vari-Focal Auto Iris Lens (4mm~9mm / F1.5)
Operating Temperature/Humidity
-10˚C ~ +50˚C / 30~90% RH
Weatherproof
IP67
Dimension
152.0(D)mm x 104.7(H)mm
1,100g
Weight
Power Consumption
ㆍ Horizontal Resolution of 540 TV Lines
ㆍ Vari-Focal Auto Iris Lens (4mm~9mm / F1.5)
ㆍ Built-in 3 Axis Bracket
ㆍ Weatherproof (IP67)
■ DIMENSION
104.7
46.0
83.5
100.0
152.0
(unit : mm)
PAL
Digital Day/Night
Vandal Resistant
Dome Camera
Digital Day/Night
Vandal Resistant
Dome Camera
■ CAMERA MODULE LAYOUT
LENS
4.0
16.4
28.0
28.0
32.0
28.0
TILT BRACKET
1.2
46.4
32.0
FOCUS
HANDLE
ZOOM
HANDLE
PAN BRACKET
■ INSTALLATION
Security Screws
with "O" Ring
Dome Cover
VIDEO
DC12V
GND
(unit:mm)
1) Dome Base Mounting
- Open the dome cover by unscrewing the decoration ring
- Mount the base of camera to a sturdy surface using 4 screws and
the 4 premade holes on the base of the dome.
Decoration Ring
2) Power Connect & Monitor Impedance
- Use a DC12V/500mA (PSU500) regulated power supply.
- To avoid fire or shock hazard, always use a CE listed power supply.
- Set the monitor impedance switch to 75Ω. Check the impedance
switch if the image appears blurred.
Dome Base
3) Camera Module Adjustment
- Loosen the screws that secure the 3-Axis camera bracket and
adjust the cameras focus and angle of view
- Make sure to retighten these camera bracket screws.
Surface
Mount Bracket
4) Dome Cover Mounting
- Tighten the screws that secure the polycarbonate bubble
- Replace the dome cover to the base and tighten the ring.
■ CABLE CONNECTION
POWER
VIDEO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising