Light, Power Sources and Bulbs
09
Light, Power Sources
and Bulbs
The HEINE BETA® range of handles – the modular power source
system
The HEINE BETA range of handles provides ideal solutions for power sources for
hand-held diagnostic instruments.
A complete range of high-quality and durable power sources is available for all
HEINE hand-held diagnostic instruments. They offer ideal solutions for the personal
preference of any user. These solutions range from the classic BETA basic handle
with 2.5 V battery power or 3.5 V rechargeable batteries up to the innovative table
charger NT 300 and the BETA L Rechargeable Handle, with charge status display for
more performance and reliability or the practical wall transformer HEINE EN 100.
BETA handles:
High-quality metal construction for strength and durability.
Automatic connector: Quick, safe connection.
Rheostat: Stepless brightness control with power level indicator.
Knurled handle surface: Non-slip and hygienic.
Hygienic and ergonomic design:
The new smooth surface of the rheostat and Automatic Connector makes cleaning
easier and the new design fits comfortably in the palm of the hand.
All 3.5 V rechargeable handles are also available from HEINE with Lithium-Ion
­technology (except BETA SLIM and small F.O. Laryngoscope handles).
Double the capacity – up to 120 min working time without recharging.
Lightweight and convenient.
No more memory effect. Full capacity whenever needed.
Guarantee:
HEINE products all benefit from an exceptional attention to detail in all aspects of
the manufacturing process. As a result of this, HEINE gives a 5 year guarantee on all
­handles and instruments.
Voltage:
230 V is the standard voltage for mains instruments. If a different voltage is required,
e. g. 120 V, please specify when ­ordering.
Note:
HEINE rechargeable power sources and transformers conform to the IEC 60601-1
Standard.
09
09
[ 142 ]
Light and Power Sources
Power Sources
The HEINE BETA® Range of Handles
One module. Multiple charging options.
The handle module X-000.99.010, 145 mm x 30 mm dia., is the basis of every
BETA handle. By adding the appropriate bottom inserts it is possible to assemble
any of the handles shown on this page. A BETA battery handle can also be
converted to a rechargeable handle in this way.
All BETA handles feature short-circuit protection and a continuous ceramic
brightness control.
BETA handle module
X-000.99.010
BETA Battery Handle
2.5 V
145 mm x 30 mm dia.
(batteries not included; appropriate batteries: IEC LR14)
BETA extension piece. Converts any BETA handle into a
3.5 V battery handle (batteries not included). Will not fit in case. BETA Bottom insert
ca
Fast charge
Charge stat
X-000.99.020
X-000.99.119
pabilit y / 2 h
BETA L Li-ion rechargeable handle for NT 300 table charger
us display
Ready-to -u
X-001.99.118
se feature
With LED charge status display in the BETA L 3.5 V bottom insert.
Rechargeable handle with Li-ion battery. Fast charge in 2 hours with the NT 300
charger.
Rechargeable handle with charge status display in the bottom insert. Display lights for 10 seconds when the handle is switched on or removed from the charger.
No memory effect. Full power at any time without loss of capacity.
Updates: Existing 3.5 V BETA handles can be converted to BETA L by substituting the
Li-ion L battery and BETA L bottom insert.
Compatible with previous chargers (NT 200).
Ready-to-use Function: If the handle is switched on when replaced in the charger,
it automatically switches off. When removed, it switches on again at the previouslyselected brightness.
BETA L Li-ion rechargeable handle for NT 300 table charger
Charge status:
100 – 67 %
66 – 34 %
145 mm x 30 mm dia., with Li-ion L rechargeable battery, complete
BETA L Bottom insert with charge status display
33 – 1 %
3.5 V
X-007.99.395
X-002.99.396
3.5 V NiMH
BETA NT rechargeable handle for NT 300 table charger
145 mm x 30 mm dia. with NiMH rechargeable battery
BETA NT bottom insert
X-002.99.411
X-002.99.412
: Rechargeable handle with charge status display in the bottom insert.
09
Light and Power Sources
Power Sources
[ 143 ]
The HEINE BETA® Range of Handles
BETA TR Rechargeable Handle with transformer
3.5 V NiMH
145 mm x 30 mm dia., with plug-in t­ransformer.
The BETA TR handle is charged by an external
­transformer. An LED indicates whether the handle is
being charged. The special handle rest prevents it
from rolling away.
BETA TR without transformer
Transformer for BETA TR rechargeable handle
BETA TR bottom insert
X-002.99.384
X-002.99.386
X-000.99.309
X-002.99.385
BETA R Rechargeable Handle for mains socket
3.5 V NiMH
170 mm x 30 mm dia. The BETA R handle can be
charged directly in the mains socket or outlet after
unscrewing the cap.
BETA R bottom insert
3.5 V
X-007.99.384
X-007.99.386
X-000.99.309
X-002.99.385
3.5 V
X-002.99.376 X-007.99.376
X-002.99.377 X-002.99.377
230 V is the standard mains voltage. If a different voltage is required, e. g. 120 V, p
­ lease specify when ordering.
09
[ 144 ]
Light and Power Sources
Power Sources
HEINE rechargeable batteries for BETA® Handles
3.5 V
NiMH
Rechargeable batteries
for BETA rechargeable handles
3.5 V
[ 02 ]
[ 03 ]
X-002.99.382 X-007.99.381 X-007.99.383
[ 01 ]
[ 01 ]
3.5 V
[ 02 ]
[ 03 ]
Please note: The Li-ion L battery is not compatible with BETA R, TR and NT 3.5 V
handles and bottom inserts. For information on HEINE Laryngoscope Handles, see
pages 081 – 085.
All full-size BETA handles can be updated to BETA L 3.5 V (except BETA SLIM)
handles by substituting the Li-ion L 3.5 V battery and the BETA L bottom insert.
Max. 4 hours recharge time in NT 300 table charger with NiMH. 2 hours with Li-ion.
Retro-compatible. All rechargeable batteries can also be charged in existing NT 200
and Nicatron chargers.
BETA Belt Clip
X-000.99.008
: Rechargeable handle with charge status display in the bottom insert.
HEINE Large Battery Handle
Dimensions: 165 mm x 37 mm dia. Weight: 212 g without batteries, 505 g with batteries.
A large handle for 2 alkali-manganese batteries IEC LR20/D cells.
Designed for ­countries where larger batteries are still preferred.
(Only suitable for c
­ ertain instrument cases.) Batteries not included.
Large battery handle
2.5 V
for 2 alkali-manganese batteries, size D
X-001.99.120
HEINE BETA® SLIM Battery / Rechargeable Handle
Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
A compact handle with automatic connector for those who prefer a slim handle.
Rechargeable in NT 300 charger fitted with the small adaptor ring.
Batteries not included.
[ 01 ]
BETA SLIM battery / rechargeable handle
2.5 V
BETA SLIM Battery Handle
BETA SLIM Rechargeable Handle with
3.5 V M3Z NiMH battery
Rechargeable battery 3.5 V M3Z NiMH [ 01 ]
X-001.99.105
3.5 V NiMH
X-002.99.471
X-002.99.106
09
Light and Power Sources
Power Sources
[ 145 ]
HEINE mini 3000® Battery Handle
Innovative, compact battery handle in a high-quality, modern design.
Suitable for all mini 3000 instruments.
Oval, compact, stylish shape. Lies ergonomically in the hand.
High-quality handle: Chrome-finish upper section / refined plastic. Shockproof,
sturdy, non-slip.
Attachment clip with integrated on / off switch. Secure. Switches off automatically
when returned to the pocket. 20.000 switch cycles guaranteed.
Screw-on end cap. For easy battery change.
Threaded connector made of metal. Prevents wear.
Replaceable batteries. Size AA, or optional rechargeable battery with mini NT table c­ harger.
Complete range of mini 3000 instruments. Versatile range.
Registered Design.
Rechargeable mini 3000 handle. The mini 3000 battery handle can be retro-fitted
with the mini rechargeable battery 2.5 V NiMH and the bottom insert to update to the
mini 3000 rechargeable handle. Fully-automatic charging with the mini NT table charger.
mini 3000 Battery Handle
2.5 V
with two dry batteries IEC LR6 (AA size)
D-001.79.021
All non-rechargeable mini handles are fitted with batteries (IEC LR 6 AA size). mini 3000 handles can
be supplied in black or blue. Please specify the colour you prefer when ordering. If not otherwise
specified, we will supply black instruments.
HEINE® NT 300 table charger
The best in performance and quality
Dimensions: Width 142 mm, Height 61 mm, Depth 66 mm, Weight 830 g.
The NT 300 table charger automatically charges HEINE rechargeable batteries
irrespective of their state of charge or their output voltage. The rechargeable battery
cannot be overcharged. With the appropriate adaptor set it is possible to recharge all
BETA L, BETA NT, BETA SLIM rechargeable handles and laryngoscope rechargeable
handles in the same NT 300. Exceptions are the rechargeable versions of the Short
and the Small F.O. LED Handles.*
Innovative, compact design. Practical and space-saving.
Two independent charging compartments. Complete functionality for one or two
handles at a time.
Fast charge feature. 2 hours to recharge rechargeable handle with Li-ion L
­rechargeable battery. 4 hours for other rechargeable handles.
Automatic charging. Independent of the state of charge of the rechargeable battery.
Guarantees extended battery life.
Charge status display. Light pulses from the charging compartment to confirm the
charging mode.
ca
Fast charge
ch
Automatic
Charge indi
pabilit y
arging
cator
NT 300 table charger
for BETA handles and Laryngoscope handles Angled F.O.,
Standard F.O. and Short F.O. (without handle, with adaptor)
X-002.99.495
Adapter set (two pieces) for BETA SLIM and Small F.O. Laryngoscope
Rechargeable Handles [ 01 ]
X-000.99.086
*Due to the increased demands on the charging management function of these rechargeable batteries, a latest
[ 01 ]
generation HEINE NT 300 recharging station must be used to properly and fully recharge these rechargeable
batteries. Latest generation HEINE NT 300 recharging stations can be identified by the serial number on the
underside of the recharging station. Recharging stations starting with the serial number SN 101 1000 001 are
compatible.
230 V is the standard mains voltage. If a different voltage is required, e. g. 120 V, p
­ lease specify when ordering.
09
[ 146 ]
Light and Power Sources
Power Sources
HEINE® mini NT charger set for mini 3000®
Compact charging technology
mini NT Charger set 2.5 V. Consists of the mini NT table charger, 2 mini NT
­rechargeable batteries and 2 bottom inserts for the mini 3000 rechargeable handles.
With this set, existing mini 3000 handles can be updated to the 2.5 V rechargeable
system. Optional adaptor set for mini 2000.
mini NT table charger: Width 112 mm, Height 50 mm, Depth 52 mm, Weight 270 g.
ca
Fast charge
ch
Automatic
C
Innovative, compact design. Practical and space-saving.
Two independent charging compartments. Complete functionality for one or two
handles at a time.
Fast charge feature. 4 hours to recharge a mini 3000 NiMH 2.5 V rechargeable battery.
Automatic charging. Independent of the state of charge of the rechargeable battery.
Guarantees extended battery life.
Can not be overcharged. Charger switches off automatically when the battery is
fully-charged.
Charge status display. Light pulses from the charging compartment to confirm the
charging mode.
No memory effect. Full power at any time without loss of capacity.
pabilit y
arging
Please note: Suitable only for mini 3000 2.5 V NiMH rechargeable battery.
tor
harge indica
mini NT table charger and accessories
[ 02 ]
[ 01 ]
[ 03 ]
[ 04 ]
mini NT Charger, only [ 01 ]
mini 3000 Rechargeable handle complete* [ 02 ]
Rechargeable battery NiMH 2Z, only [ 03 ]
Bottom insert for mini 3000 Rechargeable Handle, only [ 04 ]
X-001.99.484
D-001.79.022
X-001.99.487
X-001.99.488
mini NT Adaptor Set for 1 mini 2000 Handle
This set contains:
[ 01 ]
[ 02 ]
1 bottom insert [ 01 ] and 1 adaptor for mini 2000 [ 02 ].
Together with a rechargeable battery it will allow the upgrade of one
existing mini 2000 handle.
X-001.99.493
mini NT Charger Set for 2 mini 3000 Handles
With this set, existing mini 3000 Handles can be updated to the 2.5 V
rechargeable system. It contains:
[ 01 ]
[ 02 ]
[ 03 ]
mini NT table charger [ 01 ], 2 rechargeable batteries NiMH 2Z [ 02 ],
2 bottom inserts for mini 3000 rechargeable handle [ 03 ]
X-001.99.485
* HEINE mini 3000 pocket instruments – a complete range of quality diagnostic
­instruments for your pocket. Available in black or blue. Please specify the colour you
prefer when ordering. If not otherwise specified, we will supply black instruments.
09
Light and Power Sources
Power Sources
[ 147 ]
HEINE Lamp Handle
6 V / 4.2 W
Economically-priced light source ensuring bright illumination for Fiber Optic
instruments such as anoscope, proctoscope, sigmoidoscope.
Length of cord: 2 m. Cinch plug for connection to a 6 V power source.
Recommended power source: E 7.
Lamp Handle
6 V
with switch and XHL Xenon Halogen bulb
X-004.99.607
Spare bulb
X-004.88.060
Extension cord. Suitable for all HEINE instruments and power
sources with cinch connector. Length 2 m.
C-000.33.510
HEINE Cord switch
On/Off switch. Suitable for HEINE instruments and power sources
with cinch connector (e. g. E7).
Cord switch
X-095.16.202
Plug-in transformer HEINE® E7
6 V/6 W max. Power source, suitable for lamp handle or BETA Cord Handle.
E 7
6 V
Plug-in transformer E 7
same, with lamp handle
X-095.16.104
X-095.16.105
[ 148 ]
09
Light and Power Sources
Power Sources
Plug-in transformer for the HEINE® 3S LED / OMEGA® 500
Powerful electric supply unit for the 3S LED HeadLight / OMEGA 500
(System voltage 6 V).
Plug-in transformer for 3S LED HeadLight / OMEGA 500
X-095.16.330
HEINE® HC 50 L Headband Rheostat
Fingertip Illumination Control for OMEGA 500 / UNPLUGGED
Left or right sided Mounting Options on the OMEGA Headband.
Can be combined with EN 50 and mPack (with connection cord X-000.99.667).
100 – 240 V Compatible Transformer incl. 4 plugs for world wide compatibility.
For use with OMEGA 500 with XHL- and LED-Illumination.
[ 01 ]
[ 02 ]
[ 03 ]
HC 50 L Headband Rheostat
6 V
HC 50 L Headband Rheostat
(without plug-in transformer and connecting cord) [ 01 ]
X-095.16.325
Plug-in transformer for HC 50 L Headband Rheostat [ 02 ]
Connecting cord UNPLUGGED-Cinch [ 03 ]
X-095.16.330
X-000.99.667
09
Light and Power Sources
Power Sources
[ 149 ]
Wall Transformer HEINE® EN 50 UNPLUGGED
Intelligent charger for mPack UNPLUGGED
Charger and wall-mount in one. The wall transformer serves as an ­instrument
holder and a charger at the same time.
Intelligent charging system. The instrument automatically switches off and goes
into charging mode when placed in wall transformer. It is impossible to overcharge
the mPack UNPLUGGED; the process ends automatically when charging is completed.
Simultaneous charging. The charging system charges the battery on the headband
as well as an additional single spare battery.
Compatible transformer (100 – 240 V). Multi-voltage power supply unit incl.
4 different mains adaptors.
Registered Design.
Wall transformer EN 50 UNPLUGGED
(without mPack UNPLUGGED) 6 V
Charger an
d wall-mount
Intelligent ch
X-095.17.310
in one
arging system
HEINE® mPack Unplugged
Headband-mounted rechargeable battery
Rechargeable battery for OMEGA 500 Indirect Binocular Ophthalmoscope
UNPLUGGED and 3S LED HeadLight UNPLUGGED (System voltage 6 V).
Headband
battery (rech
LED charge
[ 01 ]
[ 02 ]
argeable)
status displa
y
Lightweight with balanced weight distribution. High level of comfort.
Charge status display. Display of remaining operating time.
Can be recharged by wall- or plug-in transformer.
Direct operation possible while charging through the use of the mobile plug-in
­transformer.
Charging time: 2 hours.
Operating time: 5.2 hours for 3S LED HeadLight, 2 hours for OMEGA 500 UNPLUGGED,
8 hours for OMEGA 500 UNPLUGGED with LED.
Intelligent charging system. Automatic changeover from operating to charging mode
(in the wall unit). Battery-friendly charging.
Top safety standards. Integrated charge and performance checks during operation.
Lithium polymer technology (selected non-flammable materials). UL-compliant.
Registered Design.
mPack Unplugged
mPack Unplugged
X-007.99.665
Transformer Unplugged for mPack UNPLUGGED [ 01 ]
Lithium-Polymer rechargeable battery
for mPack UNPLUGGED
Extension Cord from plug-in transformer UNPLUGGED to mPack
UNPLUGGED, 2 m [ 02 ]
X-095.16.316
X-007.99.680
X-000.99.668
09
[ 150 ]
Light and Power Sources
Power Sources
HEINE® mPack / HEINE® mPack LL
Portable Power Packs
The mPack is only compatible with OMEGA 500, OMEGA 200,
SIGMA 150, SIGMA 150 M2, SIGMA 150 K, SIGMA 150 K M2, Hand-held Indirect
­Ophthalmoscope MONOCULAR, Hand-held Indirect Ophthalmoscope BINOCULAR,
BETA Cord Handle, 3S LED HeadLight.
The mPack LL is only compatible with LED LoupeLight and LED MicroLight.
Brightness control from 0,5 – 100 %
Capacity: 17 hours from fully charged under full load.
Li-ion Batte
Freedom from cables that tie the user to desk, wall or static power supplies.
Triple the Capacity with Li-ion Technology. Compared with current NiCd systems.
When fully charged at least 3 x the capacity of conventional NiCd systems. More than
double of other Li-ion systems. No memory effect.
Fast Charge. Charges to full capacity in just 2 hours.
Charge status display. Always lets you know how much operating charge
you have left.
Flexible Charging Options. Charge in the EN 50 Charger base station, or with mobile
plug-in transformer.
Intelligent. Automatically switches to “charge” mode when inserted in EN 50.
Can also be used as mains power supply even while in “charge” mode.
Automatic remote power adjustment for compatibility with all HEINE 6 V and
selected LED instruments.
Stepless light intensity control. Optimum brightness setting prevents reflexes.
100 – 240 V Compatible Transformer incl. 4 plugs for world wide compatibility.
ry
Battery Capa
city Indicato
r
Fast Charge
mPack / mPack LL
[ 01 ]
EN 50-m Charger Wall / Table Unit with mPack, (incl. 90° Angled
Adaptor, Instrument support for Professional L Headband [ 01 ])
same, with mPack LL and instrument support for
S-FRAME [ 02 ] and Professional L Headband [ 01 ]
mPack with Li-ion rechargeable battery and plug-in transformer
mPack LL with Li-ion rechargeable battery and transformer
mPack with Li-ion rechargeable battery, without transformer
mPack LL with Li-ion rechargeable battery, without transformer
[ 02 ]
[ 04 ]
[ 03 ]
Li-ion rechargeable battery for mPack / mPack LL
Plug-in transformer for mPack / mPack LL [ 04 ]
Plug-in 90° Angled Adaptor (for EN 50 Charger / mPack and
mPack LL) [ 03 ]
6 V
X-095.17.302
X-095.17.303
X-007.99.672
X-007.99.660
X-007.99.671
X-007.99.661
X-007.99.676
X-095.16.315
C-000.33.509
09
Light and Power Sources
Power Sources
[ 151 ]
Wall- / Table-Transformer HEINE® EN 50
Modular Power Supply System / charger
The HEINE Modular Power Supply System offers unsurpassed flexibility and innovative
new features. The EN 50 powers OMEGA 500, 3S LED HeadLight, LED MicroLight and
LED LoupeLight. Furthermore, all other HEINE 6 V products are compatibel. The EN 50
Charger, the mPack / mPack LL and HC 50 L Headband Mounted Rheostat can be
combined in every conceivable configuration.
Modular, compact design functions as the base for Tabletop or Wall Mounted use
and as charging base for the mPack and mPack LL mobile charging ­system.
Upgradeable. mPack Charging base by simple removal of the control module.
Soft Start Technology. A gradual introduction of current reduces bulb “shock” and
extends bulb life.
100 – 240 V Compatible Transformer incl. 4 plugs for world wide compatibility.
Registered Design.
Modular Po
S
wer Supply Sy
stem
nology
of t Star t Tech
Switches of
f automatical
ly
[ 04 ]
[ 02 ]
[ 01 ]
[ 03 ]
EN 50 Charger
6 V
EN 50 Transformer table / wall unit with Rheostat Control Module
(incl. 90° Angled Adaptor, Extension Cord Cinch-Cinch 2 m,
Instrument support) [ 01 ]
Rheostat Control Module for EN 50 [ 02 ]
EN 50 Base unit (without Rheostat Control Module) [ 03 ]
X-095.17.301
X-095.17.305
X-095.17.300
Plug-in 90° Angled Adaptor (for EN 50 / mPack / mPack LL without
instrument support) [ 04 ]
Instrument support for Headband
Instrument support for S-FRAME and LED LoupeLight
C-000.33.509
C-000.33.511
C-000.33.512
09
[ 152 ]
Light and Power Sources
Diagnostic Centre
HEINE EN 100® Wall Transformer
Performance you can depend on
The EN 100 Wall Transformer is a modern attractive product that ensures proper
storage of the instruments.
[ 01 ]
Sof t Star t Te
Suitable for all HEINE 3.5 V instruments.
The EN 100 provides a constant 3.5 V output voltage independent of mains
voltage fluctuations. Economical in use, always the right amount of light and
environmentally-friendly. No batteries necessary.
Magnetic On / Off mechanism. No moving parts that can wear out or be damaged.
Durable and maintenance-free. Once selected, the brightness remains the same.
Soft start avoids current surge during the switch-on phase. Protects bulbs in the
critical switch-on phase and prolongs bulb life. Economical in use.
Advanced, ergonomic handle design. Continuous brightness control on the handle.
Quality spiral cords with a comfortable working radius of up to 3 m. Instrument locks
as standard equipment prevent unauthorised removal.
Flexible extension option. The Basic unit [ 01 ] or the Single unit [ 02 ] are freely
expandable with the Extension Unit [03] or with additional components.
chnology
Lockable ha
ndles
on
Automatic
Optional Ex
/ off switching
tension Unit
[ 02 ]
[ 03 ]
HEINE EN 100® Diagnostic Centre
How to select your personal Diagnostic Centre:
Order the EN 100 Wall Transformer and the Extension Unit or additional system
components such as the AllSpec Tip-dispenser or GAMMA XXL LF - W
Sphygmomanometer. Select the instruments of your choice (3.5 V version) individually
from the HEINE range.
[ 01 ]
[ 03 ]
[ 04 ]
[ 05 ]
EN 100 Diagnostic Centre
3.5 V
EN 100* (Basic Unit with two handles) [ 01 ]
EN 100-1 (Single Unit with one handle) [ 02 ]
Extension Unit* [ 03 ]
AllSpec Tip-dispenser [ 04 ]
GAMMA XXL LF-W Sphygmomanometer [ 05 ]
X-095.12.110
X-095.12.109
X-095.12.135
B-000.11.148
M-000.09.323
* without instruments
09
Light and Power Sources
Diagnostic Centre
[ 153 ]
HEINE EN 100® Diagnostic Centre
EN 100 Sets
[ 01 ]
[ 02 ]
3.5 V
with EN 100 Basic Unit (with two handles),
BETA 200 F.O. Otoscope, BETA 200 Ophthalmoscope,
1 set of reusable tips and
1 spare bulb for each instrument [ 01 ]
A-095.12.305
with EN 100 Basic Unit (with two handles),
BETA 100 Diagnostic Otoscope, BETA 200 Ophthalmoscope,
1 set of reusable specula and
1 spare bulb for each instrument
A-095.12.307
with EN 100 Basic Unit (with two handles),
K 180 F.O. Otoscope, K 180 Ophthalmoscope,
1 set of reusable tips, 50 disposable tips 4 mm dia.,
50 disposable tips 2.5 mm dia.
and 1 spare bulb for each instrument [ 02 ]
A-095.12.393
with EN 100 Basic Unit (with two handles),
K 100 Diagnostic Otoscope, K 180 Ophthalmoscope,
1 set of reusable tips, 50 disposable tips 4 mm dia.,
50 disposable tips 2.5 mm dia.
and 1 spare bulb for each instrument
A-095.12.394
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising