Forza - Home Depot
Forza™
Kitchen Faucet S-2640
Installation and Service Instructions
Model Numbers
Tools & Materials
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: customerservice@symmons.com
Monday - Friday 8:00 am - 7:30 pm EST
S-2640 ................. Chrome finish
S-2640-STN ........ Satin Nickel finish
S-2640-STS ......... Stainless Steel finish
2.5 mm
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Quick Install Guide Forza Kitchen Faucet, S-2640
Spray
on / off
Step 6
Flush supply lines
and check for leaks
(optional) Step 1
Place deck plate in position
typically used to cover holes
Step 2
Attach faucet assembly
finished deck
front view
Step 5
Connect water supply lines
Step 3
Connect pull-out spout hose
Step 4
Attach hose counterweight
HOT
COLD
Installation Instructions
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
Step 3
Connect pull-out spout hose
to relieve water pressure.
Step 1
Place deck plate over mounting hole
Typically used to cover existing holes when faucet is being
replaced. Install as required.
cold supply hose
with blue stripe
hot supply hose
with red stripe
spout hose
with no stripe
finished deck
front view
Step 2
1
Attach faucet to deck
2
Step 4
Attach counterweight
1
2
3
4
5
4
6
7
3
8
9 10
0 11
11 12 1
17 18 19 20 21 22 23 24 25
13 14
14 15 16
16 1
~ 25 inch
inches
c
(635
635 m
mm
mm)
Page 2
Step 5
Care of faucet finish
Connect water supply lines
Clean finish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve finish area.
Valve cartridge replacement
Removing handle, collar and cartridge
2
1
blue stripe (cold)
red stripe (hot)
HOT
optional 3/8" to 1/2"
adapters included
Step 6
COLD
Flush supply lines and check for leaks
2.5 mm
2"
Replacing cartridge
1
2
2"
Replace collar and handle
2.5 mm
Page 3
Dimensions Forza Kitchen Faucet, S-2640
9-5/8" (245mm)
Finished deck thickness
3" (77 mm) max.
2-1/4" (58 mm) max.
with flange installed
Deck plate (optional)
6-1/2" (164 mm)
2-1/8" (54 mm) dia.
Hole size
1-3/8" (35 mm) min.
1-1/2" (38 mm) max.
2-1/2"(64 mm)
12-1/2"
318 mm
10-3/8"
264 mm
10" (254 mm)
1-3/8" (35 mm) dia.
1/4" (7 mm)
Flange (optional, used to give faucet greater steadiness as required).
8"(203mm)
Typical measurement when deck plate
is used to cover existing holes in deck.
Parts Assembly Forza Kitchen Faucet, S-2640
Pull-out spout
sleeve
cartridge
locking nut
aerator
body
o-ring
deck plate
gasket
flange
screw
handle
collar
u-washer
hot supply hose
with red stripe
fixing bolt
threaded
tube
3/8" to 1/2"
adapter (2)
counter
weight
cold supply hose
with blue stripe
spout hose
washer
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 843-3849
Website: www.symmons.com ■ Email: customerservice@symmons.com
© 2007 - 2008 Symmons Industries, Inc. Printed in U.S.A.
■
ZV-538
■
091508
Replacement Parts
Part Number
Item
KN-269
valve cartridge
KN-259
wand
Ordering replacement parts:
Symmons customer service: (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST
Symmons distributors: www.symmons.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising