Weidmuller Klippon POK Polyester Enclosures
Klippon® POK - Polyester enclosures
Enclosures
Klippon® POK – Polyester enclosures
B
The Klippon® POK range is based on a high-quality glass fibre-reinforced polyester
enclosure which represents an economical solution for electrical connections. The
enclosures are ideal wherever corrosion resistance, impact resistance and a high
IP protection class are required.
Features of the enclosure range:
•17 sizes and 2 versions
•Stainless Steel lid screws
•Fixing holes located outside the sealed area
•Threaded holes for mounting rails
•Approved to the latest international standards
Our assembly service can supply these enclosures preassembled with terminals
and cable glands according to customer requirements.
T~
Overview of enclosures
Ordering data
Description
Klippon® POK 1
Klippon® POK 2
Klippon® POK 3
Klippon® POK 31
Klippon® POK 32
Klippon® POK 4
Klippon® POK 5
Klippon® POK 51
Klippon® POK 6
Klippon® POK 7
Klippon® POK 71
Klippon® POK 8
Klippon® POK 9
Klippon® POK 91
Klippon® POK 10
Klippon® POK 11
Klippon® POK 12
Note
Dimensions in mm
75 x 80 x 56
75 x 110 x 56
75 x 160 x 56
75 x 190 x 56
75 x 230 x 56
120 x 122 x 91
120 x 220 x 91
160 x 160 x 91
160 x 260 x 91
160 x 360 x 91
160 x 560 x 91
250 x 255 x 121
250 x 400 x 121
250 x 600 x 121
405 x 400 x 121
250 x 255 x 161
250 x 400 x 161
Standard
1277200000
1277300000
1277400000
1565400000
9510510000
1277500000
1277600000
1565410000
1277700000
1277800000
9510520000
1565420000
1565430000
9510470000
1565440000
9510530000
9510540000
Ex Enclosures
9510210000
9510220000
9510320000
9510330000
9510340000
9510230000
9510240000
9510250000
9510260000
9510270000
9510350000
9510280000
9510290000
9510300000
9510310000
9510360000
9510370000
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.164
1420920000 – 2013/2014
Enclosures
Klippon® POK - Polyester enclosures
Technical Overview
Features
• For use in hazardous area and industrial applications
• Extremely robust and impact resistant due to the high amount of glass fibre
• Approved to the latest international standards (e.g. ATEX, cULus, GOST)
Note
The enclosure range Klippon® POK can be assembled with terminals or other approved equipment by our Application-Specific Solutions service.
Technical data
Enclosure material
Surface
IP Rating
Equipment mounting
Enclosure mounting
Lid fixing
Impact Resistance
Gasket material
Temperature range
Torque screws of lid M4*
Torque screws of lid M6*
Flammability
Toxicity
Note
Approvals for empty enclosures
ATEX certificate
ATEX marking
GOST Ex
GOST
cULus
Lloyds Register
Russian Maritime Register
Germanischer Lloyd
Installation
Approvals terminal enclosures
ATEX certificate
ATEX marking
Note
B
Ex
Standard
Glass fibre-reinforced polyester to DIN 16913
Glass fibre-reinforced polyester to DIN 16913
with added graphite
Black, similar to RAL 9011
Grey, similar to RAL7001
IP 66
IP 66
M4 to M6 threaded bushes
M4 to M6 threaded bushes
4 holes for M4 to M6 screw
4 holes for M4 to M6 screws
M4/M6 slothead / crosshead screws from stainless steel
M4/M6 slothead / crosshead screws from stainless steel
7J
7J
Silicone (VMQ)
Chloroprene
-55 °C…+100 °C
-40 °C…+90 °C
2.0 - 2.5 Nm
2.0 - 2.5 Nm
2.5 - 3.0 Nm
2.5 - 3.0 Nm
UL94 V0
UL94 V0
Halogen and cadmium-free
Halogen and cadmium-free
We deliver enclosures through our assembly service which are ready to be connected and suitable for every application
* Depending on the screw head size, the lid can be fastened using either our slotted or cross-head screwdrivers
Ex
KEMA 02ATEX2078 U
II 2 GD Ex e II
POCC DE.ME92.B01149
POCC DE.ME25.B01450
Standard
POCC DE.ME25.B01450
E 223801
07/20008
11040200
11040200
4453607 HH
The Klippon® POK enclosure range can be pre-fitted in our customer specific production department according to your wishes;
as an example, terminals, or other approved components, can be installed as required.
This enclosure range is component certified. An additional certifications is required, when other electronic equipment will be installed into the
enclosure.
Ex
Standard
KEMA 03ATEX2077
T II 2 GD T85°C/T100°C Ex e II T6/T5
T II 2 (1) GD T85°C/T100°C Ex e [ia] IIC T6/T5
T II GD T85°C/T100°C Ex ia IIC T6/T5
IP64/IP65/IP66
If you have specific requirements of equipment in hazardous area applications, please contact Weidmüller to get a copy of the complete certificates.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013/2014
B.165
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 1
56 mm
(56)
15
80
41
75
66
B
59
(42,2)
Height/Width/Depth
75 / 80 / 56 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277200000
Ex environment enclosure, black
9510210000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
Mounting plate
Hinge, diecast zinc, Set
15 mm width
Order No.
1928060000
Steel sheet, zinc plated
9510570000
Brass Earth Continuity Plate
External mounting feet, set of 4
Note
vertical
1x1*
1x1*
horizontal
1x5
1x4
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about
populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN
(0625220000) in vertical installations. There are no pre-defined mounting points set within this
enclosure for installing internal equipment in a vertical position.
1580360000
1390910000
9510900000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
4
2
1
1
C/D
1
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only one hinge is required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.166
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
56 mm
Enclosure
Klippon® POK 2
(56)
15
110
41
75
66
B
89
(42,2)
Height/Width/Depth
75 / 110 / 56 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277300000
Ex environment enclosure, black
9510220000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
Mounting plate
Hinge, diecast zinc, Set
15 mm width
Order No.
1928070000
Steel sheet, zinc plated
9510580000
Brass Earth Continuity Plate
External mounting feet, set of 4
Note
vertical
1x1*
1x1*
horizontal
1x10
1x9
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about
populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN
(0625220000) in vertical installations. There are no pre-defined mounting points set within this
enclosure for installing internal equipment in a vertical position.
1580360000
1390920000
9510900000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
7
3
2
2
C/D
1
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only one hinge is required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.167
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 3
56 mm
(56)
15
41
160
75
66
B
139
(42,2)
Height/Width/Depth
75 / 160 / 56 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277400000
Ex environment enclosure, black
9510320000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
Mounting plate
Hinge, diecast zinc, Set
15 mm width
Order No.
1928080000
Steel sheet, zinc plated
9510680000
Brass Earth Continuity Plate
External mounting feet, set of 4
Note
vertical
*
*
horizontal
1x20
1x17
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about
populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN
(0625220000) in vertical installations. There are no pre-defined mounting points set within this
enclosure for installing internal equipment in a vertical position.
1580360000
1390930000
9510900000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
11
5
4
3
C/D
1
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only one hinge is required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.168
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
56 mm
Enclosure
Klippon® POK 31
(56)
15
41
190
75
66
B
169
Height/Width/Depth
75 / 190 / 56 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1565400000
Ex environment enclosure, black
9510330000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
horizontal
1x26
1x22
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about
populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN
(0625220000) in vertical installations. There are no pre-defined mounting points set within this
enclosure for installing internal equipment in a vertical position.
9510690000
1580360000
1390940000
9510900000
Number of cable entries
Number of cable entries
Note
Note
(33)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
14
6
5
4
C/D
1
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only one hinge is required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.169
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 32
56 mm
56
15
41
230
66
75
B
(42)
209
Height/Width/Depth
75 / 230 / 56 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
9510510000
Ex environment enclosure, black
9510340000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
vertical
*
*
horizontal
1x33
1x28
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about
populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN
(0625220000) in vertical installations. There are no pre-defined mounting points set within this
enclosure for installing internal equipment in a vertical position.
9510700000
1580360000
1390950000
9510900000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
16
6
6
4
C/D
1
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.170
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
91 mm
Enclosure
Klippon® POK 4
91
25
66
122
120
111
B
95
Height/Width/Depth
120 / 122 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277500000
Ex environment enclosure, black
9510230000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
Mounting plate
Hinge, diecast zinc, Set
15 mm width
Order No.
1928110000
Steel sheet, zinc plated
9510590000
Brass Earth Continuity Plate
External mounting feet, set of 4
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
1x12
1x10
1x7
1x6
1x5
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1390970000
9510910000
Number of cable entries
Number of cable entries
Note
Note
80
M12
M16
M20
M25
M32
M40
M50
M63
A/B
12
6
4
2
1
C/D
8
4
3
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.171
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 5
91 mm
91
25
220
66
111
120
B
204
Height/Width/Depth
120 / 220 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277600000
Ex environment enclosure, black
9510240000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510600000
vertical
*
*
*
*
*
horizontal
1x31
1x26
1x19
1x15
1x13
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1390980000
9510910000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
24
14
12
5
4
3
C/D
8
4
3
1
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.172
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
91 mm
Enclosure
Klippon® POK 51
(90)
20
160
70
160
148
B
132
Height/Width/Depth
160 / 160 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1565410000
Ex environment enclosure, black
9510250000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
Mounting plate
Hinge, diecast zinc, Set
15 mm width
Order No.
1928130000
Steel sheet, zinc plated
9510610000
Brass Earth Continuity Plate
External mounting feet, set of 4
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
1x17
1x14
1x11
1x9
1x7
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1390990000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(76)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
15
12
6
3
2
2
C/D
11
6
4
2
2
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.173
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 6
91 mm
(90)
20
260
70
160
148
B
232
Height/Width/Depth
160 / 260 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277700000
Ex environment enclosure, black
9510260000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510620000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
1x36
1x30
1x23
1x16
1x16
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391000000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(76)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
30
24
14
5
4
3
C/D
11
6
4
2
2
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.174
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
91 mm
Enclosure
Klippon® POK 7
(90)
20
70
360
160
148
B
332
Height/Width/Depth
160 / 360 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1277800000
Ex environment enclosure, black
9510270000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510630000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
1x56
1x47
1x36
1x29
1x24
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391010000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(76)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
45
36
20
8
6
5
C/D
11
6
4
2
2
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.175
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 71
91 mm
(90)
20
70
560
148
160
B
(76)
532
Height/Width/Depth
160 / 560 / 91 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
9510520000
Ex environment enclosure, black
9510350000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510710000
vertical
*
*
*
*
*
horizontal
1x94
1x79
1x60
1x49
1x41
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391020000
9510910000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
66
58
32
12
10
8
C/D
11
6
4
2
2
1
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.176
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
121 mm
Enclosure
Klippon® POK 8
(120)
25
255
95
250
238
B
227
Height/Width/Depth
250 / 255 / 121 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1565420000
Ex environment enclosure, black
9510280000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510640000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
2x38
2x31
2x23
2x19
2x15
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391030000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(106)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
36
32
10
10
8
3
2
C/D
32
21
15
8
3
3
2
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.177
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 9
121 mm
(120)
25
400
95
238
250
B
372
Height/Width/Depth
250 / 400 / 121 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1565430000
Ex environment enclosure, black
9510290000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510650000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
2x67
2x55
2x41
2x33
2x27
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391040000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(106)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
62
54
33
18
14
6
4
C/D
32
21
15
8
3
3
2
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.178
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
121 mm
Enclosure
Klippon® POK 91
(120)
25
95
600
238
250
B
572
Height/Width/Depth
250 / 600 / 121 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
9510470000
Ex environment enclosure, black
9510300000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510660000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
2x107
2x89
2x66
2x53
2x44
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000
1391050000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(106)
M12
M16
M20
M25
M32
M40
M50
M63
A/B
96
80
24
20
20
8
6
C/D
32
21
15
8
3
3
2
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.179
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 10
121 mm
(120)
25
95
400
405
393
B
(106)
372
Height/Width/Depth
405 / 400 / 121 mm
Ordering data
Max. number of terminals (industry)
RAL 7001
RAL 9011
Note
Standard, grey
Order No.
1565440000
Ex environment enclosure, black
9510310000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510670000
vertical
*
*
*
*
*
horizontal
3x67
3x55
3x41
3x33
3x27
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no prescribed possible attachment points in the enclosures for vertical installations.
1580360000
1391070000
9510910000
Number of cable entries
Number of cable entries
Note
Note
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
M12
M16
M20
M25
M32
M40
M50
M63
A/B
62
54
33
18
14
6
4
C/D
60
39
30
18
7
5
4
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.180
1420920000 – 2013
Klippon® POK - Polyester enclosures
Depth
161 mm
Enclosure
Klippon® POK 11
(160)
250
238
B
227
Height/Width/Depth
Max. number of terminals (industry)
RAL 7001
RAL 9011
Standard, grey
Order No.
9510530000
Ex environment enclosure, black
9510360000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510640000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
2x38
2x31
2x23
2x19
2x15
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no prescribed possible attachment points in the enclosures for vertical installations.
1580360000
1391030000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(146)
250 / 255 / 161 mm
Ordering data
Note
65
95
255
M12
M16
M20
M25
M32
M40
M50
M63
A/B
36
32
18
10
8
3
2
C/D
32
21
15
8
3
3
2
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1420920000 – 2013
B.181
Klippon® POK - Polyester enclosures
Depth
Enclosure
Klippon® POK 12
161 mm
(160)
238
250
B
372
Height/Width/Depth
Max. number of terminals (industry)
RAL 7001
RAL 9011
Standard, grey
Order No.
9510540000
Ex environment enclosure, black
9510370000
Assembly with terminal
The overview page lists the ambient temperatures. Colour variations may occur under certain
circumstances.
Accessories
Terminal rail, Set
15 mm width
Mounting plate
Hinge, diecast zinc, Set
Steel sheet, zinc plated
Brass Earth Continuity Plate
External mounting feet, set of 4
Order No.
Note
9510650000
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
vertical
*
*
*
*
*
horizontal
2x67
2x55
2x41
2x33
2x27
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail.
Ordering recommendations:
TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals)
ZDU 2.5 1608510000
*There are no prescribed possible attachment points in the enclosures for vertical installations.
1580360000
1391040000
9510910000
Number of cable entries
Number of cable entries
Note
Note
(146)
250 / 400 / 161 mm
Ordering data
Note
65
95
400
M12
M16
M20
M25
M32
M40
M50
M63
A/B
62
54
33
18
14
6
4
C/D
32
21
15
8
3
3
2
**Our IP 68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for
these recommended values.
Accessories described above as sets, are supplied with fixing materials.
For this enclosure only two hinges are required to be fitted to the longest side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B.182
1420920000 – 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising