WP-110

WP-110
TWISTED-PAIR INTERFACES
WP-110
COMPUTER GRAPHICS VIDEO TO TWISTED PAIR TRANSMITTER & WALL PLATE
DESCRIPTION
Resolution - Up to UXGA
HDTV Compatible
Power Connect™ System
- Only one unit in a system, the transmitter or the
receiver needs to be connected to a power source. All the system units must
have the Power Connect system to use this feature.
Advanced Sync Processing - Ensures compatibility with a wide range of
computers.
Front Panel Connections - 15-pin HD input
Rear Panel Connections - RJ-45 output
Selectable Sync Input Impedance - 75 Ώ (analog) or 510 Ώ (TTL)
System Range - Up to 100 meters (320’)
Cable - UTP (unshielded twisted pair) such as CAT 5.
Wall Plate - Single gang
The WP-110 is a twisted pair transmitter for computer graphic video
signals with resolutions ranging from VGA through UXGA and higher. It
converts a computer graphics video signal into a twisted pair signal which
will be converted back into a computer graphic signal when used in
conjunction with the TP-120 twisted pair receiver (or other compatible
Kramer receiver).
SPECIFICATIONS
INPUTS:
1 VGA / UXGA on an HD15 connector
OUTPUTS:
1 RJ 45 LINE OUT connector
BANDWIDTH (-3DB) : >150MHz, Fully Loaded
DIFF. GAIN:
2.9% (worst case)
DIFF. PHASE:
0.3 Deg (worst case)
K-FACTOR:
<0.05%
S/N RATIO:
69dB (worst case)
COUPLING:
AC
POWER SOURCE:
12 VDC 60mA
DIMENSIONS:
USA: 6.9cm x 3.8cm x 11.4cm (2.72" x 1.5" x 4.5", W, D,
H); Belgium and Germany: 8cm x 3.8cm x 8cm (3.15" x
1.5" x 3.15", W, D, H); UK and most of Europe: 8.6cm x
3.8cm x 8.6cm (3.39" x 1.5" x 3.39", W, D, H)
WEIGHT:
0.14 kg. (0.31 lbs.) approx.
ACCESSORIES:
Power supply
© www.kramerelectronics.com 2007
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising