User guide TOP.S 18swA
TRIPLE ONDA S.A
C/ Bobinadora 95
08302 Mataró (Barcelona-SPAIN)
tripleonda@tripleonda.com
www.tripleonda.com
User guide TOP.S 18swA
4. This product should not be exposed to rain or
moisture. Do not use it, for example, near a
swimming pool, water fountain or any liquid
sources.
TRIPLE ONDA,
30 years designing, manufacturing and dealing
TRIPLE ONDA LAUNCHES A NEW PRODUCT
RANGE: TOP.S SERIES
5. Clean only with a dry cloth.
6. This product should be situated so that its
location does not interfere with its proper
ventilation.
Triple Onda launches a new product range,
called TOP.S Series, designed to cover medium
and little events.
7. Do not install near heat sources such as
radiators or other devices which produce heat.
New TOP.S Series cabinets are build-in
amplified and processed for professional
performance. As usual, all Triple Onda’s
products follows the same philosophy: high
quality design, robust and unusual products for
all the professionals who live on the live sound
every day.
.
8. This equipment should be serviced only by
qualified service personnel when:
9
9
1. INTRODUCTION
9
9
1.1. General
9
TRIPLE ONDA S.L. would like to thank you for
your confidence in our TOP.S Series cabinets.
9. Unplug this product during lightning storms
or when unused for long periods of time.
A gathered experience of more than 30 years
designing acoustic cabinets and amplifiers,
applying most advanced analysis devices, has
allowed to TOP.S Series become the optimal
and ideal solution for fixed installations and
especially for live events. TOP.S Series’
lightness, quality, power, and reliability will
not fail to surprise!
10. Do not suspend the cabinet from the
handle.
2.
TOP.S
CONNECTIONS
18
swA
1-IN: Balanced signal XLR
1= Shield 2= Live 3= Return
We suggest you to carefully read the following
instructions in order to obtain the best results in
performance.
2-OUT: XLR connector used for paralleling
several units, which will share the same input.
1= Shield 2= Live 3= Return
1.2. Safety Instructions
3-Gain: Adjust LINE Input level
1. All the safety and operation instructions
should be read before this product is operated.
4-Phase : Phase switch 0º / 180º
2. The exclamation point within an equilateral
triangle is intended to alert the user of the
presence of internal components whose
substitution may affect safety.
5-LINK (MAINS): Output AC PowerCon to
feed a secondary cabinet
6-INPUT (MAINS): Input AC PowerCon
connector.
7-FREQUENCY SWITCH: Low Pass Filter 120
Hz / Low Pass Filter 150 Hz
3. The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user of the presence of uninsulated
dangerous voltage that may constitute a risk of
electric shock to persons.
TOP.S 18 swA
The power-supply cord or the plug has
been damaged; or
Objects have fallen, or liquid has
spilled; or
This product does not appear to operate
normally; or
This product has been exposed to rain;
or
The chassis is damaged.
8-LIMITER: Prevents the amplifier outputs
from overdriving the transducers. When the
LIMITER indicator is active, it is in red colour.
The LIMITER indicator can be in red
occasionally, but if it is continuously activated,
turn down the level control until the LIMITER
indicator is only in red occasionally.
2009
2
• Make sure the output volume (gain) control on
the mixing console is turned up sufficiently to
drive the inputs of the speakers.
• Make sure the mixer does not have a Mute on.
2.1. Technical features
Distorted sound
• The system is overloaded and has reached
TOP.S 18swA
maximum power. Turn down the mixer's output
or the channel's gain.
Line Input XLR
(BALANCED)
1,5V-10 kΩ
Mains
230V +/- 10%
Full power
consumption
Poor bass performance
• Check the polarity of the connections between
6,3 A
1x18" Neodymium
Magnet
the mixer and the cabinets. You may have the
positive and negative connections reversed at
one end of the cable, causing a loudspeaker to
be out-of-phase.
Omnidirectional
Noise and Hum
• Make sure all connections to the active unit
Components
Woofer
Directivity H/V
Frequency
Response(*)
30 Hz – 150/170 Hz
(depending on switch)
Maximum SPL (1m)
131 dB
Dimensions (H x W x
Note:
D)
550 x 740 x 670 mm
are in good conditions.
• Avoid the signal cables to be routed near AC
cables, power transformers, or EMI-inducing
devices.
• Check if there is any light dimmer on the same
AC circuit as the cabinet. Connect the sound
system to a different phase than the lights.
- (*) 10 dB. Half space anechoic
- Specifications
without
Weightsubjected to change48
kg
previous notice.
3. TROUBLESHOOTING
No power
• Make sure that the cabinet is plug in.
• The Fuse is blown. Replace the fuse on fuse
holder with one of the same type. If it blows
again, take the unit to a service centre.
No sound
• Check that the mixer or sound source is
sending signal to the unit.
• Make sure that the VOLUME potentiometer is
well-positioned.
• Check that the cable from the sound source to
the units is connected correctly. Replace the
cable if defective.
TOP.S 18 swA
2009
3
TRIPLE ONDA S.A
C/ Bobinadora, 95
08302 MATARÓ (Barcelona-Spain)
Phone: +34-93741 28 28 FAX:+34-93 757 60 34
Email: tripleonda@tripleonda.com
Visit us: www.tripleonda.com
TOP.S 18 swA
2009
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising