Sophisticated Camera Control(1,4p)

Sophisticated Camera Control(1,4p)
Sophisticated
Sophisticated Camera
Camera Control
Control
MCP-300
Network Master Control
Control Panel
Panel
The MCP-300 is a newly designed network master control panel for use with not only Ikegami s conventional ICCP control
and Arcnet based control, but also Ethernet based control, allowing customers the flexibly to choose the camera control
system based on their needs. As a master control panel, it provides simultaneous operation for up to 10 cameras, moreover
up to 100 cameras can be selected (10 cameras x 10 groups). The MCP-300 also supports PoE, Powering over Ethernet, so a
separate power supply is not necessary.
Large Touch Screen LCD
The MCP-300 provides a large 7-inch LCD touch screen GUI allowing an operator not only the ability to control cameras as did
previous master control panels, but also in depth access to monitor and maintain camera settings.
Illuminated Control Panel
The name of each function switch on the MCP-300 is illuminated, allowing use in a dark environment.
User Customize Functions
The MCP-300 provides four switches above the LCD screen which can be custom assigned,
also the user is free to customize function items to be assgined to the UP/DOWN Select
Swiches. The Control Depth can be set (with password protection), permitting the user to
optimize the control access of the MCP based on their operating style.
Character Output Function (Option)
The MCP-300 includes the function to output a character signal (HD-SDI) such as diagnostic
information on an external monior, also it can indicate the optical level to and from the
camera head by status bar, helping the user to easily understand the camera cable condition.
Specifications
Power Requirement
Power Consumption
Cable Length(Max.)
Operating Temperature
Storage Temperature
Operating Humidity
Dimensions
Weight
DC +12V (+10 to +18V)
13W(standard)
10m (MCP Cable without DC IN)
30m (MCP Cable with DC IN)
100m (LAN Cable, CAT5e or higher)
0 to +45℃(+32 to +113°F)
-25℃ to +60℃ (-13 to +140°F)
30% to 90% (non-condensing)
W204 x H354 x D79.4mm (W8.03 x H13.94 D3.13 inch)
approx 2.6kg (5.73lbs)
OCP-300
Ethernet Capable Operation Control Panel
Three different control architectures are supported by the OCP-300 Operation Control Panel and
BSH-300 Ethernet/ICCP command converter, each with a wide range of camera control
capability. The OCP-300 supports not only Ikegami's conventional one-by-one ICCP control and
Arcnet based control systems, but also an Ethernet based control system, allowing customers
the flexibly to choose the camera control system based on their needs. The OCP-300 includes a
touch screen LCD with rotary encoders, and SD Memory Card slot for full camera setup and filing
capability. The depth-of-control feature allows the OCP-300 control to be selected from basic
to complete to fit the customer's operating discipline. The OCP-300 also supports PoE, Powering
over Ethernet, so separate power supplies are not necessary. The BSH-300 is used for converting
command between Ethernet and ICCP, allowing previous control panels such as the OCP-200
and MCP-200, to be integrated into the Ethernet network system.
* There are three types of BSH-300, Type-A, Type-B and Type-C, each with a different type and
number of connectors.
Specifications
Power Requirement
Power Consumption
Cable Length(Max.)
Operating Temperature
Storage Temperature
Operating Humidity
Dimensions
Weight
DC +12V (+10 to +18V)
approx. 12W
50m(CP cable, ARC connection)
65m(CP cable, Serial connection)
100m(LAN cable(more than CAT5e, Ether connection)
0 to 45 °C(+32 to +113°F)
0 to +60°C(+32 to + 140°F)
30 to 90%(non-condensing)
W102 x H354 x D82.2mm (W4.01 x H13.94 x D3.24 inch)
approx. 1.44kg(3.17lbs)
BSH-300
Ethernet/ICCP Command Converter
BSH-300(Type-A)
BSH-300(Type-B)
BSH-300(Type-C)
Sophisticated Camera Control
OCP-10
Ethernet Capable Operation Control Panel
The OCP-10 is a small and compact operation panel to connect with a Base Station, such as the BSF-300, or Camera
Adaptor, CA-75HD, for camera control. It can control basic functions of the camera, such as Iris, White Balance, Black
Balance, Paint, Gamma and Master Black and it is ideal for field production or under limited space situations, such as
small mobile trucks, or portable flypacks.
The OCP-10 supports an Ethernet based control system, allowing customers to choose the
camera control system between Ikegami s traditional ICCP control and Ethernet based control
system. Also, the OCP-10 supports PoE+ Powering over Ethernet, so, separate power supplies
are not necessary.
*There is a version not supporting an Ethernet based control system.
Specifications
Power Requirement
Power Consumption
Cable Length(Max.)
Operating Temperature
Storage Temperature
Operating Humidity
Dimensions
Weight
DC +12V (+9 to +18V)
approx. 3W
300m(1074ft)ࠉCP cable
100m (328ft) LAN cable
0 to +45°C(+32 to +113°F)
0 to +60°C(+32 to +140°F)
30% to 90%(non-condensing)
W60 x H94 x D160 mm (W2.3 x H3.7 x D6.3 inch)
approx. 0.8kg (1.76 lbs) [w/o ethernet type]
approx. 0.9kg (1.99 lbs) [w ethernet type]
OCP-100
Operation
Operation Control
Control Panel
Panel
The OCP-100 is an operation panel to connect with a Base Station such as the BSF-55, BST-55, or
BSF-300, or connector with a Camera Adaptor, CA-75HD, for camera control. The panel not only
supports control of new functions incorporated in the Unicam HD series cameras such as Custom
Gamma and Variable Color Temperature, but also provides Up/Down Switch Customizing to
allow users to optimize the panel based on their operation style. Moreover, it provides some
useful functions demanded by users, such as ENG File Load, also the Color Link function achieves
simplified color-match, allowing simultaneous color balance adjustment of multiple HDTV
cameras. Operation of 3 filters (ND/CC/EFF) is ideal for control of the HDK-790/79GX.
Specifications
Power Requirement
Power Consumption
Cable Length(Max.)
Operating Temperature
Storage Temperature
Operating Humidity
Dimensions
Weight
DC +12V (+11 to +16V)
approx. 3.2W
300m(CP cable)
0 to 45 °C(+32 to +113°F)
-20 to +60°C(-4 to + 140°F)
30 to 90%(non-condensing)
W92.2 x H177.5 x D355.5mm (W3.63 x H6.99x D14.00 inch)
approx. 2.1kg(4.63lbs)
Sophisticated Camera Control
System Configurations
Conventional one by one camera control connection
OCP-100s
Conventional CCUs
New and traditional control panels can be directly
connected to the cameras on a one-by-one basis.
CP Cable
LAN Cable
Ethernet based camera control system
OCP-10s
Conventional CCUs
OCP-300s
MCP-300
OCP-100
BSH-300(Type-B)
PoE+ Switch
CCU-980
BSH-300(Type-C)
CCU-980
POV Camera
OCP-100s
BS-98
BSH-300(Type-A)
・BSH-300 (Type-A):
Integrate and power conventional OCPs (up to 6 sets)
・BSH-300 (Type-B):
Integrate conventional BS/CCUs (up to 6 sets)
・BSH-300 (Type-C):
Integrate and power conventional MCP (1 set) and Conventional OCPs (up to 2 sets)
* Recommended Control Panels for Ethernet based camera control : OCP-300, MCP-300
* A PoE+ switch is recommended for powering control panels over Ethernet.
* Recommended PoE+ switches: : GSM7212P(NETGEAR), GEP-0822 (Level One)
* It is recommended to use control panel components in a dedicated network,
excluding other devices such as PCs, etc.
* The control speed can get slower due to the number of control panels connected and
network condition.
* There is an OCP-10 not supporting with Ethernet based camera control.
U353A165-SELF
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising