Punch II T5 - Thorn Lighting

Punch II T5 - Thorn Lighting
www.thornlighting.com.au/catalogue > Indoor Lighting > Surface and Suspended Luminaires
Punch II T5
A range of surface mounted or pendant luminaires, combining
T16 (T5) direct lighting with louvres for high light output
• Smooth, rounded body design gives unobtrusive appearance
• Excellent optical performance with LOR up to 74%
• Surface luminaires can also be suspended for suspended direct illumination
• High frequency dimming versions available
Photographs, line drawings and photometric data are representative only. For specific product detail please select an individual product.
180°
150°
150°
120°
90°
120°
450
300
150
90°
60°
60°
30°
cd/klm
30°
0°
96504450
Material/Finish
Body: sheet steel painted white (close to RAL9010)
End cap: moulded in white polycarbonate
Louvres: aluminium, painted white or anodised.
Installation/Mounting
Electrical installation via piano-key terminal blocks, two cable entry points at centre of fitting. Clips retain the louvre to
enable hinging for easy lamp replacement and maintain earth continuity. Surface versions mounted with spacers via
keyholes and C-washers. Single/twin surface and DI versions can be suspended via optional wire suspension kits, close
offset rod or pendant rod kits. Continuous line mounting of luminaires via optional connect kit.
UK: BESA accessory kit available for mounting onto BESA box.
EN60598, IP20, Beam_Surface_3, IK07, Beam_Suspended_EW, Beam_eControl_A, SC1, Beam_Emergency, CE, T16, 960, Ta = +5 to +25
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising