LTC 0630 Series Dinion2X Day/Night Camera

LTC 0630 Series Dinion2X Day/Night Camera
Video | LTC 0630 Series Dinion2X Day/Night Camera
LTC 0630 Series Dinion2X Day/Night
Camera
▶ Advanced Image Processing Technology
▶ Improved XF-Dynamic engine with SmartBLC
▶ Detail enhancement
▶ True Day/Night performance with switchable filter
▶ 1/2-inch CCD sensor
The LTC 0630 Dinion2X Day/Night camera is a highperformance, surveillance camera. It uses a 1/2-inch CCD
sensor and incorporates advanced digital signal
processing for outstanding picture performance.
The advanced image processing enhances sensitivity; the
improved XF-Dynamic engine extends the dynamic range.
This unique combination provides a sharper, more
detailed image with outstanding accuracy in color
reproduction even under harsh lighting conditions.
The Dinion2X camera is easy to install and ready to use,
and offers the best solution for demanding scene
conditions. The day/night feature ensures the highest
image quality possible at any time. Depending on the
available light the camera will automatically switch from
color to monochrome.
All Dinion cameras are supplied ready to operate. Simply
attach the lens, connect video and then power. Six
distinct pre-programmed operational modes are stored in
the camera. Recall the mode that suits your application
for optimized performance.
The camera automatically detects the lens type. The lens
wizard ensures accurate back-focusing for perfectly sharp
pictures at all times. For especially challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and an Onscreen Display (OSD).
Functions
XF-Dynamic and Image Processing
Improved XF-Dynamic technology and highly accurate
digital signal processing optimally captures the detail in
both bright highlights and deep shadows simultaneously.
The Dinion2X maximizes the information visible in the
picture even with strong backlighting.
SmartBLC
Turn on SmartBLC to automatically compensate the image
without the need for complicated set-up.
Detail Enhancement
Features such as Autoblack and Sharpness further
improve the details in a scene, pixel by pixel.
Day/Night Mode
The day/night mode provides enhanced night viewing by
increasing the IR sensitivity. The IR filter can switch from
color to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can be
switched manually via the alarm input, through the camera
menu or via the Bilinx coaxial control interface. An internal
through-the-lens IR detector enhances the monochrome
mode stability, as it prevents reverting to the color mode
when IR illumination is dominant. IR contrast is also
measured and used to handle reflected IR light in outdoor
scenes.
www.boschsecurity.com
2 | LTC 0630 Series Dinion2X Day/Night Camera
Privacy masking
SensUp Dynamic
Four different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the scene to
be masked.
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight
for illumination.
Default Shutter
The default shutter speed captures fast moving objects
when sufficient light is available. When light levels fall and
other adjustments have been exhausted, the shutter
speed reverts to a standard setting to maintain sensitivity.
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion cameras.
Technicians can check status, change camera settings and
even update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation time,
provides for more accurate set-up and adjustment, and
improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.
Lens Wizard
The Lens Wizard automatically detects the lens type and
helps focus the lens at the maximum opening to ensure
proper focus is maintained throughout the 24-hour cycle.
No special tools or filters are required.
Ease of installation
Typical applications:
• Outdoor perimeters
- low light
- IR light
• Traffic monitoring
- highway
- traffic intersections
- emergency response coordination
• Tunnels
• Car parks (outdoor)
• Restricted access locations such as:
- prisons
- ports / freight terminals
- military facilities
- border control and homeland security
• Casino and gambling centers.
Certifications and Approvals
Region
Certification
Europe
CE
USA
UL
FCC
Several features are available that make installation easy:
•
•
•
Power and alarm connections have cable connectors
which can be removed even when the camera is
mounted.
A built-in test pattern generator produces signals to
test and fault-find cables.
A multi-language On-Screen Display (OSD) increases
user compatibility.
Programmable Modes
Six independent, pre-programmed operating modes
support typical applications, but are fully programmable
for individual situations. Switching between modes is easy
via Bilinx or the external alarm input.
High efficiency
A high efficiency power supply improves maximum
operating temperature.
Video Motion Detection
The built-in video motion detector allows you to select a
programmable area with individual thresholds. The global
scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on
or off the indoor or security lighting. When motion is
detected, alarms can be displayed in the video signal, the
output relay can be closed or an alarm message can be
transmitted via Bilinx.
Declaration of Conformity
Canada
Declaration of Conformity
CSA
Electro Magnetic Compatibility
Emission
EN55022 class B, FCC part 15 class B, EN6100-3,
EN50121-4
Immunity
EN50130-4 (CE), EN50121-4 (CE)
Vibration
Camera with 500 g (1.1 lbs) lens according to
IEC60068-2-6
Safety
LTC0630/11: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
UL60950, CAN/CSA No. 60950
LTC0630/51: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
EN61000-3-2 2000 +A2:2005,
EN61000-3-3 1995 +A1:2001 +A2:2005
LTC0630/21 and LTC0630/61: UL1950-1, CSA 22.2 No. 950-1,
EN60950-1 (CE), UL60950, CAN/CSA No. 60950
LTC 0630 Series Dinion2X Day/Night Camera | 3
Installation/Configuration Notes
Power Consumption
350 mA (12 VDC)
250 mA (24 VAC)
70 mA (120-240 VAC)
CCD Type
1/2-inch interline
Dimensions
118 (4.646)
85 (3.346)
34 (1.339)
Active Pixels
1/4"-20 UNC
PAL Model:
752 x 582
NTSC Model
768 x 494
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture Usable picture
(50 IRE)
(30 IRE)
Color
1.40 lx
(0.13 fc)
0.31 lx
(0.029 fc)
0.0991 lx
(0.0097 fc)
Color
+ SensUp 10x
0.14 lx
(0.013 fc)
0.031 lx
(0.0029 fc)
0.00991 lx
(0.0009 fc)
Monochrome
0.57 lx
(0.053 fc)
0.121 lx
(0.0112 fc)
0.0391 lx
(0.0036 fc)
Monochrome
+ SensUp 10x
0.057 lx
(0.0053 fc)
0.0121 lx
(0.00112 fc)
0.00391 lx
(0.00036 fc)
Dinion2X D/N Camera
1/4"-20 UNC
48 (1.889)
122 (4.803)
59 (2.323)
67 (2.638)
Horizontal Resolution
540 TVL
Signal-to-Noise Ratio
>50 dB
Video Output
Composite video 1 Vpp, 75 ohm
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Sensitivity up
Adjustable from Off up to 10x
Day/Night
Color, Mono, Auto
Auto Black
Automatic continuous, Off
Dynamic engine
XF-Dynamic, SmartBLC
Dynamic range
96 dB (16-bit image processing)
mm (in)
Parts Included
Quantity Component
1
LTC 0630 Series Dinion2X Day\Night Camera
1
C/CS – mount conversion ring
1
Spare male 4 – pin lens connector
Dynamic Noise Reduction Auto, On/off selectable
Lens not included
Technical Specifications
Electrical
Model No.
LTC 0630/11
Rated Voltage
Rated Frequency
24 VAC ±10%
50 Hz
12 VDC ±10%
LTC 0630/21
24 VAC ±10%
60 Hz
12 VDC ±10%
LTC 0630/51
230 VAC ±10%
50 Hz
LTC 0630/61
120 VAC ±10%
60 Hz
Sharpness
Sharpness enhancement level selectable
SmartBLC
On/Off
AGC
AGC On or Off (0 – 30 dB) selectable
Peak White Invert
On/Off
White Balance
ATW, ATWhold and manual (2500 to
10000K)
Alarm Output
VMD or Bilinx
Alarm Input (TTL)
Profile switching, +3.3 V nominal, +40 VDC
max.
Alarm Output Relay
30 VAC or +40 VDC, Max 0.5 A continuous,
10 VA
External Synchronization
Input
75 ohm or high impedance selectable
Cable Compensation
Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
Camera ID
17 character editable string, position selectable
www.boschsecurity.com
4 | LTC 0630 Series Dinion2X Day/Night Camera
Test Pattern Generator
Lens Types
Ordering Information
Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV
plane
Accessories
Manual, DC- and Video-Iris auto-detect with
override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous
EX12LED8M LED Infrared Illuminator
Infrared w/ 42 LEDs, 850 nm, Med Beam
30°, 12/24 VRB, 0.5 amp, Photocell
EX12LED8M
EX12LED9M LED Infrared Illuminator
Infrared w/ 42 LEDs, 940 nm, Med Beam
30°, 12/24 VRB, 0.5 amp, Photocell
EX12LED9M
EX12LED8W LED Infrared Illuminator
Infrared w/ 42 LEDs, 850 nm, Wide Beam
60°, 12/24 VRB, 0.5 amp, Photocell
EX12LED8W
EX12LED9W LED Infrared Illuminator
Infrared w/ 42 LEDs, 940 nm, Wide Beam
60°, 12/24 VRB, 0.5 amp, Photocell
EX12LED9W
Lens Mount
CS (max lens protrusion 5 mm, 0.2 inch), Cmount compatible with supplied adapter ring
Modes
6 preset programmable modes
Remote Control
Bilinx coaxial bi-directional communication
Video Motion Detection
One area, fully programmable
Privacy Masking
Four independent areas, fully programmable
Controls
OSD with soft-key operation (multi-lingual)
EX12LED‑3BD‑8M Infrared Illuminator
EX12LED IR Illuminator, 850 nm, 30 deg
beam
EX12LED-3BD-8M
Dimensions (H x W x L)
58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch)
without lens
EX12LED-3BD-8W
Weight
450 g (0.99 lbs) without lens
EX12LED‑3BD‑8W Infrared Illuminator
EX12LED, IR Illuminator, 850 nm, 60 deg
beam
Color
RAL 9007 Metallic Titanium
EX12LED-3BD-9M
Tripod Mount
Bottom (isolated) and top 1/4-inch 20 UNC
EX12LED‑3BD‑9M Infrared Illuminator
EX12LED IR Illuminator, 940 nm, 30 deg
beam
EX12LED‑3BD‑9W Infrared Illuminator
EX12LED, IR Illuminator, 940 nm, 60 deg
beam
EX12LED-3BD-9W
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 – 12 mm, DC-iris, C-mount
F1.2-360, 4-pin
LTC 3764/20
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount
F1.4-360, 4-pin
LTC 3774/30
TC8235GIT Ground Loop Isolation
Transformer
TC8235GIT
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
UPA-2410-60
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
UPA-2430-60
UPA-2450-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 50 VA Out
UPA-2450-60
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
UPA-2420-50
UPA-2450-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 50 VA Out
For use with certain 24 VAC camera models.
UPA-2450-50
S1374 Adapter
converts C mount lens to CS mount camera
S1374
Mechanical
Environmental
Operating Temperature
-20°C to +55°C (-4°F to 131°F)
Storage Temperature
-40°C to +70°C (-40°F to +158°F)
Operating Humidity
20% to 93% RH
Storage Humidity
up to 98% RH
Ordering Information
LTC 0630/11 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, PAL, 2X DSP, 24 VAC/
12 VDC, 50 Hz
LTC 0630/11
LTC 0630/21 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, NTSC, 2X DSP, 24 VAC/
12 VDC, 60 Hz
LTC 0630/21
LTC 0630/51 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, PAL, 2X DSP, 230 VAC,
50 Hz
LTC 0630/51
LTC 0630/61 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, NTSC, 2X DSP,
120 VAC, 60 Hz
LTC 0630/61
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 11 | Data subject to change without notice
T6252172043 | Cur: en-US, V11, 7 Jun 2011
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.asia
Represented by
LTC 0630 Series Dinion2X Day/Night Camera | 5
Ordering Information
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB
Adaptor
VP-CFGSFT
www.boschsecurity.com
6 | LTC 0630 Series Dinion2X Day/Night Camera
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 11 | Data subject to change without notice
T6252172043 | Cur: en-US, V11, 7 Jun 2011
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.asia
Represented by
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising