Maverick MKII Spot User Manual Rev. 2

Maverick MKII Spot User Manual Rev. 2
User Manual
Edition Notes
Edition Notes
Trademarks
Copyright Notice
Manual Use
The Maverick MK2 Spot User Manual Rev. 2 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Maverick MK2 Spot. Chauvet
released this edition of the Maverick MK2 Spot User Manual in May 2016.
CHAUVET, the Chauvet logo and Maverick MK2 Spot are registered trademarks or trademarks
of Chauvet & Sons, LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other company and product names and logos referred to herein may be trademarks
of their respective companies.
The works of authorship contained in this manual, including, but not limited to, all design, text
and images are owned by Chauvet.
© Copyright 2016 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any other purpose without written consent from
Chauvet.
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Document
Printing
Intended Any person in charge of installing, operating, and/or maintaining this product should completely
Audience read through the guide that shipped with the product, as well as this manual, before installing,
Disclaimer
Document
Revision
operating, or maintaining this product.
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility and specifically disclaims any and all liability to
any party for any loss, damage or disruption caused by any errors or omissions in this
document, whether such errors or omissions result from negligence, accident or any other
cause. Chauvet reserves the right to revise the content of this document without any obligation
to notify any person or company of such revision, however, Chauvet has no obligation to make,
and does not commit to make, any such revisions.
The Maverick MK2 Spot User Manual Rev. 2 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version. Go to
www.chauvetprofessional.com for the latest version.
Maverick MKII Spot User Manual Rev. 2
Table of Contents
Table of Contents
1. Before You Begin ................................................................................................................................................... 1
What Is Included ....................................................................................................................................................................1
Claims .................................................................................................................................................................................................... 1
Manual Conventions .............................................................................................................................................................................. 1
Symbols ................................................................................................................................................................................................. 1
Product At A Glance ..............................................................................................................................................................1
Safety Notes ..........................................................................................................................................................................2
Personal Safety...................................................................................................................................................................................... 2
Mounting And Rigging ............................................................................................................................................................................ 2
Power And Wiring .................................................................................................................................................................................. 2
Operation ............................................................................................................................................................................................... 2
Expected LED Lifespan .........................................................................................................................................................2
2. Introduction ............................................................................................................................................................ 3
Description .............................................................................................................................................................................3
Features at a glance ..............................................................................................................................................................3
Overview ................................................................................................................................................................................3
Dimensions ............................................................................................................................................................................4
3. Setup ....................................................................................................................................................................... 5
AC Power ...............................................................................................................................................................................5
AC Plug.................................................................................................................................................................................................. 5
Fuse Replacement ................................................................................................................................................................................. 5
Mounting ................................................................................................................................................................................6
Orientation ............................................................................................................................................................................................. 6
Signal Connections ................................................................................................................................................................7
Art-Net™ Connection ............................................................................................................................................................................. 7
sACN Connection .................................................................................................................................................................................. 7
4. Operation ................................................................................................................................................................ 8
Touchscreen and Control Panel Description .........................................................................................................................8
Menu Map ..............................................................................................................................................................................8
Operating Settings Configuration .........................................................................................................................................12
Home Screen ....................................................................................................................................................................................... 12
Network Setup ..................................................................................................................................................................................... 12
Personality ........................................................................................................................................................................................... 14
Settings ................................................................................................................................................................................................ 14
Test Mode ............................................................................................................................................................................................ 18
System Information .............................................................................................................................................................................. 18
Offset Mode .........................................................................................................................................................................19
DMX Values .........................................................................................................................................................................21
32CH ....................................................................................................................................................................................21
24CH ....................................................................................................................................................................................23
Gobo Designs ......................................................................................................................................................................26
Color Wheel .........................................................................................................................................................................26
6. Technical Information.......................................................................................................................................... 27
Product Maintenance ...........................................................................................................................................................27
Error Indication.....................................................................................................................................................................27
7. Technical Specifications ..................................................................................................................................... 28
Returns ...................................................................................................................................................................... 29
Contact Us ................................................................................................................................................................ 30
Maverick MKII Spot User Manual Rev. 2
-i-
Before You Begin
1. BEFORE YOU BEGIN
What Is
Included
Claims
· Maverick MK2 Spot
· True 1 compatible power cord
· 2 Omega brackets
· Warranty card
· User Manual
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to
report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention
Manual
Conventions
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
Settings
MENU>Settings
ON
Symbols
Symbols
Meaning
A button on the product’s control panel
A product function or a menu option
A sequence of menu options
A unique value to be entered or selected in a menu
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.
Product At A
Glance
Use on Dimmer
Outdoor Use
Master/Slave
DMX
Maverick MK2 Spot User Manual Rev. 2
x
x
x
P
Auto Programs
Auto-Ranging Power Supply
Replaceable Fuse
User-Serviceable
x
P
P
x
-1-
Before You Begin
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety ·
·
·
·
Mounting And ·
Rigging
·
·
·
·
·
Power And ·
Wiring ·
·
·
·
·
Operation ·
·
·
·
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
Make sure there are no flammable materials close to this product while it is operating.
When hanging this product, always secure to a fastening device using a safety cable.
Never carry the product by the power cord or any moving part.
Make sure the power cord is not crimped or damaged.
Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a dimmer pack or rheostat.
Make sure to replace the fuse with another of the same type and rating.
Never disconnect this product by pulling or tugging on the power cable.
Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
Do not cover the ventilation slots when operating to avoid internal overheating.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
In case of a serious operating problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.
Expected LED
Lifespan
-2-
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan
is vital, lower the operating temperature by improving the ventilation around the product and
reducing the ambient temperature to an optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.
Maverick MK2 Spot User Manual Rev. 2
Introduction
2. INTRODUCTION
bright with precision engineered optics and a color mixing system that will leave you
Description Stunningly
breathless, the Maverick MK2 Spot sets new standards in moving head LED spots. Powered by an
industry leading 440W LED engine, this fixture boasts a CMY+CTO color mixing system, two 6
position rotating slot and lock gobo wheels, a 7 position + white color wheel, variable frost and 3
facet prism. All of this projected through a 13° to 37° zoom system. With the ability to control the
Maverick MK2 Spot over DMX, Art-Net, or by WDMX, there is an option for every situation. As an
added feature, this fixture can receive Art-Net in, and send out DMX, simplifying cable runs.
Features at a ·
·
glance ·
·
·
·
·
·
440W LED light engine
16-bit Dimming
Variable CMY+CTO color mixing
Two rotating, indexing and interchangeable slot and lock gobos
DMX , WDMX, sACN, and Art-Net control
13° to 37° Zoom angle
Iris, 3-facet prism, and frost for beam control
True 1 compatible power input
Overview
Front View
Rear View
Yoke
Fans
Handles
Rubber Foot
(x4)
Display
Menu
Buttons
Wireless
Antenna
5-pin DMX
In/Out
3-pin DMX
In/Out
Ethernet LED
Indicator
Maverick MK2 Spot User Manual Rev. 2
etherCON® Through
Ports
True 1
Compatible
Power In
Power
Switch
Fuse-Holder
-3-
Introduction
Dimensions
17.6 in
447 mm
21.6 in
549 mm
9.8 in
249 mm
15.6 in
396 mm
15.1 in
384 mm
11.1 in
282 mm
26.4 in
671 mm
9.8 in
249 mm
14.6 in
371 mm
4.5 in
114 mm
-4-
Maverick MK2 Spot User Manual Rev. 2
Setup
3. SETUP
AC Power
Each Maverick MK2 Spot has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Maverick
MK2 Spot, refer to the label affixed to the product. You can also refer to the Technical
Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com.
· Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
· Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
AC Plug The Maverick MK2 Spot comes with a power input cord terminated with a True 1 compatible
connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse 1. Disconnect this product from the power outlet.
Replacement 2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(F 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Maverick MK2 Spot User Manual Rev. 2
-5-
Setup
Mounting
Orientation
Before mounting this product, read and follow the Safety Notes. For our CHAUVET
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance. The Maverick MK2 Spot can be suspended upright
or upside down using the 2 Omega brackets included, or it can be placed on its rubber feet on a
flat level surface.
Chauvet recommends using the following general guidelines when mounting this product:
·
·
·
·
·
·
·
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
When mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Place the Maverick MK2 Spot so that it can move freely without hitting anything or anybody.
Leave enough slack on the cable to prevent tension and pull on the plugs.
Mounting Diagram
Mounting Clamps
Omega Brackets
Safety
Cable
Rubber Feet (x4)
Overhead Mounting
-6-
Floor Mounting
Maverick MK2 Spot User Manual Rev. 2
Setup
Signal Connections
The Maverick MK2 Spot can receive DMX, sACN or Art-Net™ signals. The Maverick MK2 Spot
has 2 etherCON® through ports, and 3- and 5-pin DMX In and Out ports. For more information
about DMX, read the DMX primer at:
http://www.chauvetlighting.com/downloads/DMX_Primer_Rev9_ML_WO.pdf
Art-Net™ Art-Net™ is an Ethernet protocol that uses TCP/IP, which transfers large amounts of DMX512
Connection data using an etherCON® RJ45 connection over a large network. An Art-Net™ protocol
document is available from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
Chauvet Professional recommends using unicast Art-Net™ for best results.
sACN Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and
Connection formatting of Architecture for Control Networks to transport DMX512 data over TCP/IP or any
other ACN compatible network. ACN is maintained by the Professional Lighting and Sound
Association (PLASA).
Switch or Router
(such as the NET-Switch
from CHAUVET Professional)
Connection
Diagram
Computer/Controller
(running TCP/IP
protocol)
To other TCP/IP
Devices
Maverick MK2 Spot User Manual Rev. 2
-7-
Operation
4. OPERATION
The Maverick MK2 Spot has a touchscreen display as well as 6 control buttons. Navigate the menu structure by
pressing the buttons, touching the images of the buttons on the sides of the display, or touching the desired
menu option on the display directly. The touchscreen can be locked and calibrated through the Setup options in
the menu (see Touchscreen Calibration and Touchscreen Lock).
Button
Function
Touchscreen
and Control
Panel
Description
(<UP>)
Navigates upwards through the menu list or increases the numeric value
when in a function
<
Exits from the current menu or function
<
>
>
(<MENU>)
<
>
Navigates downwards through the menu list or decreases the numeric
value when in a function
(<DOWN>)
<
>
Navigates leftwards through the menu list
(<LEFT>)
<
>
(<ENTER>)
<
>
Enables the currently displayed menu or sets the currently selected value
into the selected function
Navigates rightwards through the menu list
(<RIGHT>)
Menu Map
Main Level
Programming Levels
Address
000–512
Ethernet to DMX
Description
Network Setting
YES
NO
Turn on Art-Net to DMX capability
Manual
Network Setup
Selection of IP mode
(Static IP: 2.243.76.222)
IP Mode
DHCP
Universe
0 ~ 255
ArtNetIp
002.243.075.222
IP setting
SubMask
255.000.000.000
Subnet Mask
Static
DMX 24CH
Personality
DMX 32CH
YES
NO
YES
NO
Set the Universe
Choose 24 Channels of DMX
Choose 32 Channels of DMX
DMX
Control Mode
WDMX
ArtNet
Signal Selection
sACN
Settings
Pan Reverse
Tilt Reverse
YES
NO
YES
NO
Reverse the Pan
Reverse the Tilt
NO
Screen Reverse
YES
AUTO
-8-
Manually or automatically reverse the
screen
Maverick MK2 Spot User Manual Rev. 2
Operation
Main Level
Programming Levels
Description
540
Pan Angle
360
Change the Pan angle
180
270
Tilt Angle
180
Change the Tilt angle
90
YES
BL. O. P/T Move
Enable/disable XY blackout
NO
YES
BL. O. Color Move
Enable/disable color blackout
NO
YES
BL. O. Gobo Move
Enable/disable gobo blackout
NO
YES
Calibration
Turn on Calibration
NO
YES
Touchscreen Lock
Lock the touchscreen
NO
YES
Lock Screen
Lock the buttons and touchscreen
PASSCODE: 0920
NO
YES
Swap X/Y
Swap the pan and tilt
NO
Fast
X/Y Mode
Pan and tilt speed
Slow
YES
WDMX Reset
Reset the wireless DMX
NO
30S
Settings
(Continued)
1M
Backlight Timer
Set the backlight to turn off automatically
after a chosen time
5M
ON
Hold
Loss of Data
Loss of data setting
Close
Auto
Fans
Full
Change the fan speed mode
ECO
Linear
Square
Dimmer Curve
Set the dimmer curve
I Square
Scurve
Smooth
Dimmer Speed
Change the dimmer speed
Fast
Pan/Tilt
Iris/ Prism
Color/CMY + CTO
Reset Function
Gobo/Gobo Rotate
YES/NO
Reset individual functions to factory
Zoom/Frost/
Focus
All
Maverick MK2 Spot User Manual Rev. 2
-9-
Operation
Main Level
Programming Levels
Description
YES
Factory Settings
Reset all functions to factory
NO
Auto Test
Test
-10-
Manual Test
Auto test the product
Pan
0 ~ 255
Pan Fine
0 ~ 255
Tilt
0 ~ 255
Tilt Fine
0 ~ 255
P/T Speed
0 ~ 255
Dimmer
0 ~ 255
Dimmer Fine
0 ~ 255
Shutter
0 ~ 255
Virtual
Shaking
0 ~ 255
Cyan
0 ~ 255
Megenta
0 ~ 255
Yellow
0 ~ 255
CTO
0 ~ 255
Color
0 ~ 255
Gobo 1
0 ~ 255
Gobo 1 Index
Fine
0 ~ 255
Gobo 1 Rotate
0 ~ 255
Gobo 2
0 ~ 255
Gobo 2 Index
Fine
0 ~ 255
Gobo 2 Rotate
0 ~ 255
Focus
0 ~ 255
Focus Fine
0 ~ 255
Focus Auto
0 ~ 255
Zoom
0 ~ 255
Zoom Fine
0 ~ 255
Prism
0 ~ 255
Prism Rotate
0 ~ 255
Iris
0 ~ 255
Frost
0 ~ 255
CMY Macro
0 ~ 255
CMY Macro
Speed
0 ~ 255
Special
Function
0 ~ 255
Individually test each function/channel
Maverick MK2 Spot User Manual Rev. 2
Operation
Main Level
Programming Levels
Description
Ver
Fixture Information
V1
Running Mode
DMX
DMX Address
001
Temperature
Fixture Hours
MAC
Fan Information
025
Current Temparature
Current active hours
255.000.000.000
00.04.a3.08.00.00
Channel Information
Maverick MK2 Spot User Manual Rev. 2
Current IP address
Current subnet mask
MAC address
Base Fan1 Speed
2000rpm
View speed setting
Base Fan2 Speed
2000rpm
View speed setting
Head Fan1 Speed
2000rpm
View speed setting
Head Fan2 Speed
2000rpm
View speed setting
Error Information
Information
Current Mode
00000
ArtNetIp 002.243.075.222
SubMask
Current Version
_____
Will appear on screen
Frequency
0Hz
Pan
0 ~ 255
Pan Fine
0 ~ 255
Tilt
0 ~ 255
Tilt Fine
0 ~ 255
P/T Speed
0 ~ 255
Dimmer
0 ~ 255
Dimmer Fine
0 ~ 255
Shutter
0 ~ 255
Virtual Shaking
0 ~ 255
Cyan
0 ~ 255
Megenta
0 ~ 255
Yellow
0 ~ 255
CTO
0 ~ 255
Color
0 ~ 255
Gobo 1
0 ~ 255
Gobo 1 Index Fine
0 ~ 255
Gobo 1 Rotate
0 ~ 255
Gobo 2
0 ~ 255
Gobo 2 Index Fine
0 ~ 255
Gobo 2 Rotate
0 ~ 255
Focus
0 ~ 255
Focus Fine
0 ~ 255
Focus Auto
0 ~ 255
Zoom
0 ~ 255
Zoom Fine
0 ~ 255
Prism
0 ~ 255
Prism Rotate
0 ~ 255
Iris
0 ~ 255
Frost
0 ~ 255
CMY Macro
0 ~ 255
CMY Macro Speed
0 ~ 255
Special Function
0 ~ 255
Status of individual channel
-11-
Operation
Operating Settings Configuration
Home Screen The Maverick MK2 Spot has a home screen that shows the protocol mode, the IP address or DMX
address, the DMX personality, and the current product temperature. To see the home screen, press
<MENU> repeatedly until it appears on the display.
Start Address To set the starting address, set the Control Mode and then follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Start Address, or touch the display
where it says Start Address.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Enter the starting address (001–512) with one of the following methods:
· Type the address number using the number pad that shows on the touchscreen display.
or
· Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
5. Press <ENTER>.
Network Setup
The universe of the TCP/IP protocol will be the universe of the DMX function.
Ethernet To DMX The Maverick MK2 Spot can convert a single ethernet input signal to a single DMX output signal.
To activate or deactivate the Ethernet to DMX function, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display
where it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Ethernet to DMX, or touch the display where it says Ethernet
to DMX.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or
touch the display where it says the desired setting.
7. Press <ENTER>.
IP Mode The IP address of the Maverick MK2 Spot can be set manually, by the network, or to a pre-set static
address specific to each product. To set the IP Mode, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display
where it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from:
· Manual (set the IP address with the control panel),
· DHCP (the network sets the IP address),
or
· Static (a pre-set address specific to each product),
or touch the display where it says the desired mode.
7. Press <ENTER>.
-12-
Maverick MK2 Spot User Manual Rev. 2
Operation
Subnet and The Subnet and universe must be assigned through the product menu. To set the Subnet and
Universe Universe do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display
where it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Subnet and Universe, or touch the display where it says
Subnet and Universe.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
· Type the universe number using the number pad that shows on the touchscreen display.
or
· Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe or subnet is set as desired.
7. Press <ENTER>.
ArtNet IP Address To set the IP address, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display
where it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select ArtNetIP, or touch the display where it says ArtNetIP.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following
methods:
· Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the IP address is set as desired.
· With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired.
7. Press <ENTER>.
Subnet Mask To set the Subnet Mask, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display
where it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following
methods.
· Through the touchscreen:
a.
Touch the display where it shows the byte (set of three numbers) to be changed.
b.
Use the number pad on the display to enter the desired number.
c.
Repeat until the Subnet Mask is set as desired.
· With the buttons:
a.
Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b.
Use <UP> or <DOWN> to increase or decrease the value.
c.
Repeat until the Subnet Mask is set as desired.
7. Press <ENTER>.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.
Maverick MK2 Spot User Manual Rev. 2
-13-
Operation
Personality
To set which DMX personality to use, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it
says Personality.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 24CH or DMX 32CH, or touch the
display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES (confirm) or touch the
display where it says the desired option.
7. Press <ENTER>.
Settings
To reach the Settings menu, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the display where it
says Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
Control Mode The Maverick MK2 Spot can be set to respond to DMX, WDMX, Art-Net™ or sACN. The protocol
configuration must be set for the product to respond correctly to the controller(s). See the Menu
Map for more information.
To configure the protocol for the Maverick MK2 Spot, follow the instructions below:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control
Mode.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet., or touch
the display where it says the desired option.
5. Press <ENTER>.
For WDMX control, ensure the antenna is raised and there are no obstructions between the
controller and the product. See WDMX Reset for troubleshooting information.
Pan/Tilt To set whether the pan or tilt orientation is normal or inverted:”
Orientation 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it
says the desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5. Press <ENTER>.
Display To set which way the display faces, do the following:
Orientation 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and
orients itself accordingly), or touch the display where it says the desired option.
5. Press <ENTER>.
-14-
Maverick MK2 Spot User Manual Rev. 2
Operation
Pan/Tilt Angle To set the range of motion the pan or tilt is permitted:
Range 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Pan Angle or Tilt Angle, or touch the display where it says the
desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for
pan or tilt respectively), 180 (180°), or 90 (90°) or touch the display where it says the desired
option.
5. Press <ENTER>.
Blackout on To set whether the product will black out during pan or tilt movement, follow the instructions below:
Pan/Tilt 1. Navigate to the Settings menu.
Movement 2. Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says BL. O. P/T
Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.
Blackout on Color To set whether the product will black out during color movement, follow the instructions below:
Movement 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select BL. O. Color Move, or touch the display where it says BL. O.
Color Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.
Blackout on Gobo To set whether the product will black out during gobo movement, follow the instructions below:
Movement 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select BL. O. Gobo Move, or touch the display where it says BL. O.
Gobo Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.
Touchscreen If the touchscreen is not responding correctly, it may need to be calibrated. To do so:
Calibration 1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate),
or touch the display where it says the desired option.
5. Press <ENTER>.
6. Follow the instructions, touching the points as they appear on the display.
Touchscreen Lock To lock or unlock the touchscreen control panel, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says
Touchscreen Lock.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES
(display will not respond to touch), or touch the display on the desired option.
5. Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 2
-15-
Operation
Lock the Screen To lock the touchscreen control panel and menu buttons, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch or
buttons) or YES (display will not respond to touch or buttons), or touch the display where it says
the desired option.
5. Press <ENTER>.
Swap Pan and Tilt
Pan/Tilt Speed
WDMX Reset
Backlight Timer
Loss of Data
-16-
To unlock the touchscreen and menu buttons, do the following:
1. Touch the display touchscreen anywhere or push any menu button.
2. Enter the passcode (0920) using the touchscreen or buttons.
To switch the pan and tilt functions so that what normally controls the pan controls the tilt and what
normally controls the tilt controls the pan, follow the instructions below:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan
controls tilt, tilt controls pan), or touch the display where it says the desired option.
5. Press <ENTER>.
To set the maximum speed of the pan and tilt:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select XY Mode, or touch the display where it says XY Mode.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.
To reset the WDMX connection from the Maverick MK2 Spot, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX
Reset.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES
(reset the connection), or touch the display where it says the desired option.
5. Press <ENTER>.
To set the amount of time after inactivity before the display backlight turns off:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight
Timer.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M
(after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or 30M (after 30 minutes of
inactivity), or touch the display where it says the desired option.
5. Press <ENTER>.
In case of an input signal being lost in any way, the Maverick MK2 Spot will respond in one of two
ways. The product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close
(black out all LED output), or touch the display where it says the desired option.
5. Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 2
Operation
Fan Speed To set the speed of the fans, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it
says the desired option.
5. Press <ENTER>.
Dimmer Curve To set the dimmer curve, follow the instructions below:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer
Curve.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or
touch the display where it says the desired option.
5. Press <ENTER>.
Dimmer Speed To set the dimmer speed, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display
where it says the desired option.
5. Press <ENTER>.
Reset Functions To reset the pan, tilt, or all functions as if from startup:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Iris/Prism,
Color/CMY+CTO, Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it
says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or
touch the display where it says the desired option.
7. Press <ENTER>.
Factory Reset To restore the Maverick MK2 Spot to factory default settings, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5. Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 2
-17-
Operation
Test Mode
Auto Test To perform an auto test of the Maverick MK2 Spot functions, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test.
5. Press <ENTER>.
Manual Test To test the functions of the product manually, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says
Test.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Manual test, or touch the display where it says Manual test.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select the function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/S
Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO,
Color, Gobo, Gobo Rotate, Gobo 2, Gobo 2 Rotate, Focus, Focus Fine, Focus Auto, Zoom,
Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed, or Special
Function, or touch the display where it says the desired function.
7. If using the buttons instead of the touchscreen, press <ENTER>.
8. Change the value of the tested function with one of the following methods:
· Type the desired value using the number pad that shows on the touchscreen display.
or
· Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
9. Press <ENTER>.
System Information
All information about the current status of the Maverick MK2 Spot is available through the product’s
Sys Info menu. To view this information, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it
says Information.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running
mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error
Information (shows any errors or No Error!), or Channel Information (shows the current value
of all signal input channels) or touch the display where it says the desired option.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to scroll through the information.
-18-
Maverick MK2 Spot User Manual Rev. 2
Operation
Offset Mode The
PAN
TILT
COLOR
GOBO
GOBO ROTATE
GOBO 2
GOBO 2 ROTATE
FOCUS 1
FOCUS 2
FOCUS GOBO 2
Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen
appears.
2. Enter the passcode 2323 using one of the following methods:
· Through the touchscreen: use the number pad on the screen to enter 2323.
· With the buttons:
d. Use <DOWN> to select the number to be changed.
e. Use <UP> to increase the value.
f. Repeat until 2323 has been entered.
3. Press <ENTER>.
This brings you into the Zero Adjust menu screen.
1. Use <UP> or <DOWN> to select PAN.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select TILT.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select COLOR.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select GOBO.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select GOBO ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select GOBO 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select GOBO 2 ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select FOCUS 1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select FOCUS 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
1. Use <UP> or <DOWN> to select FOCUS GOBO 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 2
-19-
Operation
ZOOM 1.
2.
3.
4.
PRISM 1.
2.
3.
4.
IRIS 1.
2.
3.
4.
FROST 1.
2.
3.
4.
CYAN 1.
2.
3.
4.
MAGENTA 1.
2.
3.
4.
YELLOW 1.
2.
3.
4.
CTO 1.
2.
3.
4.
DIMMER 1.
2.
3.
4.
LED POWER 1.
2.
3.
4.
MAC4 1.
2.
3.
4.
MAC5 1.
2.
3.
4.
MAC6 1.
2.
3.
4.
-20-
Use <UP> or <DOWN> to select ZOOM.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select PRISM.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select IRIS.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select FROST.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select CYAN.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select MAGENTA.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select YELLOW.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select CTO.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select DIMMER.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select LED POWER.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select MAC4.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select MAC5.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Use <UP> or <DOWN> to select MAC6.
Press <ENTER>.
Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 2
Operation
DMX Values
32CH
Channel Function
Value
Percent/Settings
1
Pan
000ó255 0–100%
2
Fine Pan
000ó255 0–100%
3
Tilt
000ó255 0–100%
4
Fine Tilt
000ó255 0–100%
5
Pan/Tilt Speed
000ó255 0–100%
6
Dimmer
000ó255 0–100%
7
Fine Dimmer
000ó255 0–100%
8
Shutter
000ó003
004ó007
008ó076
077ó145
146ó215
216ó255
9
Virtual Shutter
000ó001 No function
002ó128 Shaking strobe, slow to fast
129ó255 Fade in/out, slow to fast
10
Cyan
000ó255 0–100%
11
Magenta
000ó255 0–100%
12
Yellow
000ó255 0–100%
13
CTO
000ó255 0–100%
Color Wheel
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
042ó047
048ó059
060ó187
188ó219
220ó223
224ó255
Open
Red
Orange
Green
Blue
Magenta
Yellow
UV
Split colors
Clockwise color scroll, fast to slow
Stop
Counter-clockwise color scroll, slow to fast
Gobo Wheel 1
[Gobo Designs]
000ó008
009ó017
018ó026
027ó035
036ó044
045ó053
054ó063
064ó073
074ó082
083ó091
092ó100
101ó109
110ó118
119ó127
128ó191
192ó255
Open
Gobo 1 (circuits)
Gobo 2 (ring of rings)
Gobo 3 (checker vortex)
Gobo 4 (triangle)
Gobo 5 (star field)
Gobo 6 (lenticular glass)
Gobo 6 Shaking
Gobo 5 Shaking
Gobo 4 Shaking
Gobo 3 Shaking
Gobo 2 Shaking
Gobo 1 Shaking
Open
Clockwise gobo scroll, fast to slow
Counter-clockwise gobo scroll, slow to fast
Gobo Rotating 1
000ó063
064ó145
146ó149
150ó231
232ó255
Rotating Gobo Index
Clockwise rotating, fast to slow
Stop
Counter-clockwise rotating, slow to fast
Bounce effect
14
15
16
Maverick MK2 Spot User Manual Rev. 2
Closed
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Open
-21-
Operation
32CH
Channel Function
Percent/Settings
000ó255 0–100%
Gobo Wheel 2
[Gobo Designs]
000ó008
009ó017
018ó026
027ó035
036ó044
045ó053
054ó063
064ó073
074ó082
083ó091
092ó100
101ó109
110ó118
119ó127
128ó191
192ó255
Open
Gobo 1 (spiral)
Gobo 2 (dot chiclets)
Gobo 3 (splat breakup)
Gobo 4 (wavy bar)
Gobo 5 (shower glass)
Gobo 6 (lenticular glass)
Gobo 6 Shaking
Gobo 5 Shaking
Gobo 4 Shaking
Gobo 3 Shaking
Gobo 2 Shaking
Gobo 1 Shaking
Open
Clockwise gobo scroll, fast to slow
Counter-clockwise gobo scroll, slow to fast
19
Gobo Rotating 2
000ó063
064ó145
146ó149
150ó231
232ó255
Rotating Gobo Index
Clockwise rotating, fast to slow
Stop
Counter-clockwise rotating, slow to fast
Bounce effect
20
Gobo Wheel 2 Index
Fine
000ó255 0–100%
21
Focus
000ó255 0–100%
22
Fine Focus
000ó255 0–100%
23
Auto Focus
000ó010
011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170
171ó190
191ó210
211ó255
24
Zoom
000ó255 0–100%
25
Fine Zoom
000ó255 0–100%
26
Prism
000ó004 No Function
005ó255 Prism Effect
Prism Rotate
000ó127
128ó189
190ó193
194ó255
Rotating position
Clockwise rotating, slow to fast
Stop
Counter-clockwise rotating, fast to slow
28
Iris
000ó063
064ó127
128ó191
192ó255
Big to small
Auto change, slow to fast
Slow zoom in, fast zoom out (slow to fast)
Slow zoom out, fast zoom in (slow to fast)
29
Frost
000ó255 0–100%
30
CMY Macro
000ó009 No function
010ó255 CMY macro
31
CMY Macro Speed
000ó255 fast to slow
17
18
27
-22-
Value
Gobo Wheel 1 Index
Fine
No Function
0-5m
6m
7m
8m
9m
10m
12.5m
15m
17.5m
20-60m
Auto-detect distance
Maverick MK2 Spot User Manual Rev. 2
Operation
32CH
Channel Function
32
24CH
Control
Channel Function
Value
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó175
176ó183
184ó191
192ó199
200ó207
208ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250
251ó255
Value
Percent/Settings
No function
XY blackout
C blackout
G blackout
XYC blackout
XYG blackout
XYCG blackout
no function
X reset
Y reset
Color reset
Gobo & gobo rotating reset
no function
Prism reset
Focus reset
All reset
Iris reset
Frost reset
Zoom reset
CMY+CTO reset
Fan low speed
Fan full speed
Fan auto
no function
Iris Fast mode
Iris Smooth mode
XY swap on
XY swap off
no function
XY smooth mode
XY fast mode
Percent/Settings
1
Pan
000ó255 0–100%
2
Fine Pan
000ó255 0–100%
3
Tilt
000ó255 0–100%
4
Fine Tilt
000ó255 0–100%
5
Pan/Tilt Speed
000ó255 0–100%
6
Dimmer
000ó255 0–100%
7
Shutter
000ó003
004ó007
008ó076
077ó145
146ó215
216ó255
8
Virtual Shutter
000ó001 No function
002ó128 Shaking strobe, slow to fast
129ó255 Fade in/out, slow to fast
9
Cyan
000ó255 0–100%
10
Magenta
000ó255 0–100%
11
Yellow
000ó255 0–100%
12
CTO
000ó255 0–100%
Maverick MK2 Spot User Manual Rev. 2
Closed
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Open
-23-
Operation
24CH
Channel Function
Percent/Settings
Color Wheel
Open
Red
Orange
Green
Blue
Magenta
Yellow
UV
Split colors
Clockwise color scroll, fast to slow
Stop
Counter-clockwise color scroll, slow to fast
Gobo Wheel 1
[Gobo Designs]
000ó008
009ó017
018ó026
027ó035
036ó044
045ó053
054ó063
064ó073
074ó082
083ó091
092ó100
101ó109
110ó118
119ó127
128ó191
192ó255
Open
Gobo 1 (circuits)
Gobo 2 (ring of rings)
Gobo 3 (checker vortex)
Gobo 4 (triangle)
Gobo 5 (star field)
Gobo 6 (lenticular glass)
Gobo 6 Shaking
Gobo 5 Shaking
Gobo 4 Shaking
Gobo 3 Shaking
Gobo 2 Shaking
Gobo 1 Shaking
Open
Clockwise gobo scroll, fast to slow
Counter-clockwise gobo scroll, slow to fast
Gobo Rotating 1
000ó063
064ó145
146ó149
150ó231
232ó255
Rotating Gobo Index
Clockwise rotating, fast to slow
Stop
Counter-clockwise rotating, slow to fast
Bounce effect
Gobo Wheel 2
[Gobo Designs]
000ó008
009ó017
018ó026
027ó035
036ó044
045ó053
054ó063
064ó073
074ó082
083ó091
092ó100
101ó109
110ó118
119ó127
128ó191
192ó255
Open
Gobo 1 (spiral)
Gobo 2 (dot chiclets)
Gobo 3 (splat breakup)
Gobo 4 (wavy bar)
Gobo 5 (shower glass)
Gobo 6 (lenticular glass)
Gobo 6 Shaking
Gobo 5 Shaking
Gobo 4 Shaking
Gobo 3 Shaking
Gobo 2 Shaking
Gobo 1 Shaking
Open
Clockwise gobo scroll, fast to slow
Counter-clockwise gobo scroll, slow to fast
17
Gobo Rotating 2
000ó063
064ó145
146ó149
150ó231
232ó255
Rotating Gobo Index
Clockwise rotating, fast to slow
Stop
Counter-clockwise rotating, slow to fast
Bounce effect
18
Focus
000ó255 0–100%
19
Zoom
000ó255 0–100%
20
Prism
000ó004 No function
005ó255 Prism effect
13
14
15
16
-24-
Value
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
042ó047
048ó059
060ó187
188ó219
220ó223
224ó255
Maverick MK2 Spot User Manual Rev. 2
Operation
24CH
Channel Function
Value
Percent/Settings
Prism Rotate
000ó127
128ó189
190ó193
194ó255
Rotating position
Clockwise rotating, slow to fast
Stop
Counter-clockwise rotating, fast to slow
22
Iris
000ó063
064ó127
128ó191
192ó255
Big to small
Auto change, slow to fast
Slow zoom in, fast zoom out (slow to fast)
Slow zoom out, fast zoom in (slow to fast)
23
Frost
000ó255 0–100%
Control
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó175
176ó183
184ó191
192ó199
200ó207
208ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250
251ó255
21
24
Maverick MK2 Spot User Manual Rev. 2
No function
XY blackout
C blackout
G blackout
XYC blackout
XYG blackout
XYCG blackout
no function
X reset
Y reset
Color reset
Gobo & gobo rotating reset
no function
Prism reset
Focus reset
All reset
Iris reset
Frost reset
Zoom reset
CMY+CTO reset
Fan low speed
Fan full speed
Fan auto
no function
Iris Fast mode
Iris Smooth mode
XY swap on
XY swap off
no function
XY smooth mode
XY fast mode
-25-
Operation
Wheel 1
Gobo Designs
Ring of Rings
Checker Vortex
Triangle
Star Field
Lenticular Glass
Spiral
Dot Chiclets
Splot Breakup
Wavy Bar
Shower Glass
Lenticular Glass
Wheel 2
Circuits
Color Wheel
Yellow
Magenta
UV
Blue
Open
Red
Green
Orange
-26-
Maverick MK2 Spot User Manual Rev. 2
Operation
6. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans by blowing compressed air into them.
Error Indication
Indicator
Meaning
Focus
Focus error detected
Zoom
Prism
Indicator
Meaning
Y_cm
Tilt magnetic sensor error
Zoom error detected
Y_op
Tilt optocoupler error
Prism error detected
CPU_A
IC-A error
Prism.R
Rotating prism error detected
CPU_B
IC-B error
Gobo
Gobo wheel 1 error detected
CPU_C
IC-C error
Gobo.R
Rotating gobo wheel 1 error detected
CPU_D
IC-D error
Gobo2
Gobo wheel 2 error detected
CPU_E
IC-E error
Gobo2.R
Color
Iris
CYAN
MAGENTA
YELLOW
CTO
Rotating Gobo wheel 2 error detected
Head Fan1
Head fan 2 error detected
Color error detected
Head Fan2
Head fan 2 error detected
Iris error detected
Base Fan1
Base fan 1 error detected
Cyan error detected
Base Fan2
Base fan 2 error detected
Magenta error detected
Yellow error detected
CTO error detected
X_cm1
Pan magnetic sensor 1 error detected
X_cm2
Pan magnetic sensor 2 error detected
X_op
Pan optocoupler error
Maverick MK2 Spot User Manual Rev. 2
-27-
Technical Specifications
7. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
15.1 in (385 mm)
9.8 in (250 mm)
26.4 in (671 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Switching (internal)
Parameter
Consumption
Current
Fuse/Breaker
Power I/O
Light Source
Photo Optic
DMX
Art-Net™/ sACN
Thermal
Ordering
Voltage Selection
100–240 VAC, 50/60 Hz
Auto-ranging
120 VAC, 60 Hz
208 VAC, 60 Hz
230 VAC, 50 Hz
740 W
6.01 A
F 10 A, 250 V
U.S./Canada
723 W
3.63 A
F 10 A, 250 V
700 W
3.33 A
F 10 A, 250 V
Worldwide
Power input connector
Power cord plug
Type
True 1 compatible
Edison (U.S.)
Power
True 1 compatible
Local plug
Lifespan
LED
Color
440 W
Quantity
50,000 hours
Current
CW (cold white)
Parameter
1
Value
5.6 A
Illuminance (13°) @ 5 m
Illuminance (37°) @ 5 m
Beam Angle
Field Angle
Zoom Angle
18,079 lux
2,518 lux
12° to 35°
13° to 37°
13° to 37°
Color Temperature
CRI
Strobe Rate
I/O Connector
6,808 K
73
0 to 20 Hz
Channel Range
3- and 5-pin XLR
I/O Connector
24 or 32
Channel Range
etherCON®
Max. External Temperature
24 or 32
Cooling System
113 °F (45 °C)
Product Name
Maverick MK2 Spot
-28-
62.8 lb (28.5 kg)
Fan-Assisted Convection
Item Name
Item Code
MAVERICKMK2SPOT
08011154
UPC Number
781462215026
Maverick MK2 Spot User Manual Rev. 2
Returns
RETURNS
To get support or return a product:
· If you are located in the U.S., contact Chauvet World Headquarters.
· If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
· If you are located in Mexico, contact Chauvet Mexico.
· If you are located in Benelux, contact Chauvet Europe BVBA.
If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico,
or Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet products to
them. Visit our website www.chauvetlighting.com for contact details.
Call the corresponding Chauvet Technical Support office and request a Return Merchandise
Authorization (RMA) number before shipping the product. Be prepared to provide the model
number, serial number, and a brief description of the cause for the return.
Send the merchandise prepaid, in its original box, and with its original packing and accessories.
Chauvet will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned
without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place
it inside the box:
· Your name
· Your address
· Your phone number
· RMA number
· A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
Maverick MK2 Spot User Manual Rev. 2
-29-
Contact Us
CONTACT
US
USA WORLD HEADQUARTERS
General Information – Chauvet
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice:
(954) 577-4455
Fax:
(954) 929-5560
Toll free: (800) 762-1084
EUROPE
General Information - Chauvet Europe BVBA
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice:
+32 9 388 93 97
General Information - Chauvet Europe Ltd.
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
+44 (0)1773 511115
Fax:
+44 (0)1773 511110
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax:
(954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web www.chauvetlighting.com
Technical Support
Email: Eutech@chauvetlighting.eu
World Wide Web www.chauvetlighting.eu
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
MEXICO
General Information - Chauvet Mexico
Technical Support
Address: Av. Santa Ana 30
Email: servicio@chauvet.com.mx
Parque Industrial Lerma
World Wide Web www.chauvet.com.mx
Lerma, Mexico C.P. 52000
Voice:
+52 (728) 285-5000
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record.
Follow their instructions to request support or to return a product. Visit our website for contact
details.
Maverick MK2 Spot User Manual Rev. 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising