charging solution - Tierney Brothers
CHARGING
SOLUTION
CHARGING SOLUTIONS
Yes20 Charging Cart
for Mini-Laptops
The 30-year legacy of Anthro Corporation lives on in its world-class factory, flexible awardwinning designs, and market-leading personal customer service. When you see Anthro-DNA,
it signifies quality manufacturing and technology leadership.
PRODUCT SPECIFICATIONS
Tested for Safety: Our charging carts and cabinets are tested by ETL to UL standard 60950-1 for US and Canada.
Materials: Steel with baked-on powder coat finish. Wood surfaces in the Mobile Devices family are medium-density
fiberboard wrapped in a highly durable thermoplastic laminate that resists cracking and stands up to
regular cleaning.
Temperature: Operating temperature: 0˚ to 30˚ C (32˚ to 86˚ F), Storage temperature: -29˚to 60˚ C
(-20˚ to 140˚ F).
For Warranty details, visit www.ergotron.com/warranty.
ERGOTRON YES CHARGING CART AND CABINET FAMILY
ERGOTRON YES36 CHARGING CART FOR MINI-LAPTOPS. BUILT WITH ANTHRO-DNA
REPOSITIONABLE SHELVES
REMOVABLE BAYS
USER AREA
IT AREA
B
A
C
• Charges, secures, and transports 1-36 mini-laptops like the Chromebook, Ultrabook, and Surface Pro in a strong,
adjustable cart.
• Deep front user area supports all devices up to 13” screen and some with 14” screen.
• Adjustable shelves install at any height in 2/3” increments along the 27”-high installation track. Store devices on
their long side, in landscape orientation, or on their short side, in portrait orientation, as dictated by device size
and the position of the power inlet and on/off button. Cart ships with shelves arranged for landscape storage.
• Adjustable bay dividers install at any width in 1/3” increments along the 20”-long installation track. Supports
devices of any thickness, with and without cases.
• Cart ships configured with bays 1.25” wide x 14.25” deep x 10” high. Adjust the bay width and height to suit your devices.
• Small footprint, just 28.75” wide x 25” deep, fits into tight spaces and through doorways with room to spare.
• Bay dividers are made of molded ABS polymer and come with cable channels along the top to route
charging cords right to the front of the bay.
• Locking IT area in back provides 36 power outlets and three roomy bins to hold power adapters and cord bundles.
• A power management system alternates power from one side of the cart to the other to manage the cart’s
power draw. This time cycle is set at 25 minutes when the cart leaves the factory and can be adjusted
anywhere from 15-120 minutes using the timer control accessed inside the IT area.
• Interface panel under the handle has two external outlets to power your peripherals plus the on/off switch
and indicator lights.
• Power cord is 14 feet long to reach as far as you need. Cord is stored on strong cord hooks nested under the
handle so they’re safely out of the way and keep the cord convenient.
• Dual front doors open with a single latch. Door panels are ventilated to keep air moving inside the enclosure.
• Keyed locks on front and back doors engage a two-point locking system for security. Padlock brackets
position your padlock to block access to the front and back latches for extra security.
• Four 4" casters, 2 directional lock and 2 total lock, move the cart where it’s needed, even over rough surfaces.
• The two directional lock casters make the cart easier to steer. How? Directional lock casters don’t swivel –
they lock the direction of the casters so they move in a straight line. Press the tabs of the directional lock
casters to lock their direction when you need to move more than a few feet. Release the tabs so the casters
swivel when you need to maneuver into tight spaces.
• Wide handle with 13” grip sits at a comfortable 39” height and makes the cart easy to steer.
• Top surface is made of contoured wood with strong vinyl thermoplastic laminate for smooth corners and soft edges.
• Made with 14- and 16-guage steel with durable baked-on powder coat finish.
• Ships assembled - just unpack and go!
• Empty cart weighs 174 lbs. Shipping weight is 194 lbs.
• Listed to UL standard 60950-1 and CSA 22.2-60950 for both the enclosure and the electrical system, so you
know it’s safe. TAA compliant.
Product
Units
YES36
1-36
Height (A) Width (B) Depth (C) Weight
41.5"
28.75"
25"
Part #
Price
174 lbs. YESMORGMPW4 $2,189
1/16
Chromebook™ is a trademark of Google Inc.
16
CHARGING
Prices subject to change.
*Not available for discount.
COLOR CHOICES
Grey Metallic (GM) Silver Metallic (SM)
Polar White (PW)
White (WH)
Black (BK)
Metal Colors (zz)
ERGOTRON YES20 CHARGING CART FOR MINI-LAPTOPS. BUILT WITH ANTHRO-DNA
REPOSITIONABLE SHELVES
REMOVABLE BAYS
USER AREA
IT AREA
B
A
C
• Made for mini-laptops like the Chromebook, Ultrabook, and Surface Pro, this flexible charging cart charges,
secures and transports 1-20 devices.
• Deep front user area supports all devices up to 13” screen and some with 14” screen.
• Adjustable shelves install at any height in 2/3” increments along the 27”-high installation track. Store devices on
their long side, in landscape orientation, or on their short side, in portrait orientation, as dictated by device size
and the position of the power inlet and on/off button. Cart ships with shelves arranged for landscape storage.
• Adjustable bay dividers install at any width in 1/3” increments along the 12”-long installation track. Supports
devices of any thickness, with and without cases.
• Cart ships configured with bays 1.6” wide x 14.25” deep x 10” high. Adjust the bay width and height to suit your devices.
• Small footprint, just 24.25” wide x 27.75” deep, fits into tight spaces and through doorways with room to spare.
• Bay dividers are made of molded ABS polymer and come with cable channels along the top to route
charging cords right to the front of the bay.
• Locking IT area in back provides 20 power outlets and two roomy bins (12.75" wide x 4.25" deep) to hold power
adapters and cord bundles.
• Interface panel above the IT area has three outlets plus the on/off switch and indicator lights.
• Power cord is 14 feet long to reach as far as you need.
• Single front door opens 270 degrees so door lays flush against the side of the cart when open.
• Keyed locks on front and back doors engage a two-point locking system for security. Padlock brackets
position your padlock to block access to the front and back latches for extra security.
• Four 4" casters, all locking, move the cart where it’s needed, even over rough surfaces.
• Wide handle with 13” grip sits at a comfortable 39” height and makes the cart easy to steer.
• Top surface is made of contoured wood with strong vinyl thermoplastic laminate for smooth corners and soft edges.
• Made with 14- and 16-guage steel with durable baked-on powder coat finish.
• Ships assembled - just unpack and go! Empty cart weighs 146 lbs. Shipping weight is 166 lbs.
• Listed to UL standard 60950-1 and CSA 22.2-60950 for both the enclosure and the electrical system, so you
know it’s safe. TAA compliant.
Product
Units
YES20
1-20
Height (A) Width (B) Depth (C) Weight
42"
24.25"
27.75"
Part #
Price
146 lbs. YESMJUGMPW4 $1,999
ERGOTRON YES40 CHARGING CART FOR TABLETS. BUILT WITH ANTHRO-DNA.
REPOSITIONABLE SHELVES
REMOVABLE BAYS
USER AREA
IT AREA
B
A
1/16
Quick Ship items usually ship within 1-3 business days.
Too see if your product on the list, go to page 39.
Product
Units
YES40
1-40
Height (A) Width (B) Depth (C) Weight
46.25"
23.75"
24.75"
Part #
Price
136 lbs. YESTABGMPW4 $1,799
anthro.com • 800.325.3841
Charging
C
• Adjustable tablet charging cart supports 1-40 tablets, and ships configured for 32.
• Adjustable shelves install at any height in 2/3” increments along the 31”-high installation track. Store
devices on their long side, in landscape orientation, or on their short side, in portrait orientation, as dictated
by device size and the position of the power inlet and on/off button. Cart ships with shelves arranged for
landscape storage.
• Adjustable bay dividers install at any width in 1/3” increments along the 12”-long installation track. Supports
devices of any thickness, with and without cases.
• Cart ships configured with bays 1.25" wide x 10.5” deep x 8” high. Adjust the bay width and height to suit your devices.
Cart ships with additional dividers to create 40 bays.
• Small footprint, just 24” square, tucks into any corner and rolls down narrow aisles with ease. At 46” high, the
cart is a comfortable teaching station, too.
• Bay dividers are made of molded ABS polymer and come with cable channels along the top to route charging
cords right to the front of the bay.
• Locking IT area in back provides 42 power outlets. Pegboard divider panel holds cable clips that organize
cord bundles.
• Interface panel above the IT area has three external outlets to power your peripherals plus the on/off switch and
indicator light.
• Power cord is 14 feet long to reach as far as you need.
• Single front door opens 270 degrees so door lays flush against the side of the cart when open.
• Keyed locks on front and back doors engage a two-point locking system for security. Padlock brackets
position your padlock to block access to the front and back latches for extra security.
• Four 4” casters, all locking, move the cart where it’s needed, even over rough surfaces.
• Wide handle with 9.5” grip sits at a comfortable 40” height and makes the cart easy to steer.
• Top surface is made of contoured wood with strong vinyl thermoplastic laminate for smooth corners and soft edges.
• Made with 14- and 16-guage steel with durable baked-on powder coat finish.
• Ships assembled - just unpack and go! Empty cart weighs 136 lbs. Shipping weight is 156 lbs.
• Listed to UL standard 60950-1 and CSA 22.2-60950 for both the enclosure and the electrical system, so you
know it’s safe. TAA compliant.
17
ANTHRO IN ACTION
Charging
Our Mobile Device Charging Solutions were beta
tested at Canby School District in nearby Canby, Oregon.
ERGORTON YES12 CHARGING WALL CABINET FOR MINI-LAPTOPS. BUILT WITH ANTHRO-DNA
SEPARATE IT AREA
C
A
B
• Charge, secure, and transport 1-12 mini-laptops like the Chromebook, Ultrabook, and Surface Pro in a spacesaving cabinet. Mix and match mini-laptops, tablets, and hand-helds in a single charge and store solution!
• Deep front user area supports all devices up to 13” screen and some with 14” screen.
• Two adjustable shelves install at any height in 2/3” increments along the 21.5” high installation track.
Store devices on their long side, in landscape orientation, or on their short side, in portrait orientation, as
dictated by device size and the position of the power inlet and on/off button. Cabinet ships with shelves
arranged for landscape storage.
• Adjustable bay dividers install at any width in 1/3” increments along the shelf’s 12”-long installation
track. Supports devices of any thickness, with and without cases.
• Bay dividers are made of molded ABS polymer and come with cable channels along the top to route
charging cords right to the front of the bay.
• Numbered bays organize devices. Open the door and see at a glance which devices are checked out.
• Separate locking IT area on the side provides 15 power outlets and two roomy bins to hold power
adapters, cords, and outlets away from users.
• Power cord, 8 ft long, stores in the IT area. Feed it out of the IT area through a notch in the base of the unit
to plug into a wall outlet, or through a pass-through in the back panel to hard wire into your electrical.
• Keyed locks on front and side doors for security. Low-profile handles are easy to grip. Padlock bracket on
the front door positions your padlock to block access to the handle.
• Attach it to your wall or set it on a countertop and save valuable floor space. Choice of installation
methods: attach to studs or drywall, or bolt through a countertop. Ships assembled with instructions and
hardware. Supports up to 65 lbs total.
• Made with 14- and 16-gauge steel with durable baked-on powder coat finish.
• Comes in mix of Polar White (doors, shelves, and dividers) and Grey Metallic (everything else).
• Comes with top and bottom wood panels, side panel, back panel, two adjustable-heigh shelves, 12 bay
dividers with adjustable bay width, 2 cable combs at rear to route cables to side IT area, power panel with
15 receptacles, 2 bins to store power adapters and cord bundles, cable ties, on/off switch, 8-ft power
cord, front door with keyed lock and padlock bracket, side door with keyed lock.
• Listed to UL standard 60950-1 for both the enclosure and the electrical system, so you know it’s safe. TAA compliant.
Product
YES12
Height (A)
Width (B)
Depth (C)
Weight
24"
22.25"
16.75"
65 lbs.
Part #
Price
YESMLCGMPW $779
ERGOTRON YES20 CHARGING WALL CABINET FOR TABLETS. BUILT WITH ANTHRO-DNA.
SEPARATE IT AREA
C
A
B
• Secure locking cabinet stores and charges up to 20 tablets, iPad devices, and hand-helds.
• Mount the cabinet to a wall or bolt it to a countertop for extra security. At just 22” wide and 12.75”
deep, the cabinet saves space.
• Two adjustable shelves install at any height in 2/3” increments along the 21” high installation track.
Store devices on their long side, in landscape orientation, or on their short side, in portrait orientation, as
dictated by device size and the position of the power inlet and on/off button. Cabinet ships with shelves
arranged for landscape storage.
• Adjustable bay dividers install at any width in 1/3” increments along the shelf’s 12”-long installation
track. Supports devices of any thickness, with and without cases.
• Bay dividers are made of molded ABS polymer and come with cable channels along the top to route
charging cords right to the front of the bay.
• Numbered bays organize devices. Open the door and see at a glance which devices are checked out.
• Separate locking IT area on the side provides 21 power outlets to hold power adapters, cords, and outlets
away from users. Cable ties keep area tidy.
• Power cord, 8 ft long, stores in the IT area. Feed it out of the IT area through a notch in the base of the unit
to plug into a wall outlet, or through a pass-through in the back panel to hard wire into your electrical.
• Keyed locks on front and side doors for security. Low-profile handles are easy to grip. Padlock bracket on
the front door positions your padlock to block access to the handle.
• Attach it to your wall or set it on a countertop and save valuable floor space. Choice of installation methods:
attach to studs or drywall, or bolt through a countertop. Ships assembled with instructions and hardware.
• Supports up to 45 lbs total.
• Materials: Steel with baked-on powder coat finish. Wood surfaces in the Mobile Devices family are
medium-density fiberboard wrapped in a highly durable thermoplastic laminate that resists cracking and
stands up to regular cleaning.
• Comes in mix of Polar White (doors, shelves, and dividers) and Grey Metallic (everything else).
• Comes with top and bottom wood panels, side panel, back panel, two shelves with adjustable height, 20
bay dividers with adjustable bay width, 2 cable combs at rear to route cables to side IT area, power panel
with 21 receptacles, on/off switch, 8-ft power cord, cable ties, front door with keyed lock and padlock
bracket, side door with keyed lock.
• Listed to UL standard 60950-1 for both the enclosure and the electrical system, so you know it’s safe. TAA compliant.
YES20
18
CHARGING
Height (A)
Width (B)
Depth (C)
Weight
24"
22"
12"
65 lbs.
Part #
Price
YESCABGMPW $779
Prices subject to change.
*Not available for discount.
1/16
Product
COLOR CHOICES
Grey Metallic (GM) Silver Metallic (SM)
Polar White (PW)
White (WH)
Black (BK)
Metal Colors (zz)
TABLET CHARGING SOLUTIONS ACCESSORIES
SYNC KIT (TABLET CHARGING ONLY)
•Use Anthro’s Sync Kit to provide a wired connection to devices including iPad or iPod mobile devices. This 10-port USB hub connects
10 devices at a time to your laptop. Kit comes with one 10-port hub, ten cords with a USB connector on one end and a device
connector on the other end (30-pin or lightning), one laptop cord, and one cable with AC power adapter.
•Hub meets or exceeds USB 2.0 specifications for hi-speed data transmission rates up to 480 Mbps.
Product
Weight
Part #
Price
Sync Kit: 30-pin to USB
2 lbs.
947WH
$134.95*
Sync Kit: Lightning to USB
2 lbs.
915WH
$229.95*
USB CHARGING HUBS (TABLET CHARGING ONLY)
•Need to provide power to devices that require a USB port to charge? Use one of these charging hubs. Plug your devices into the hub,
and plug the hub into the cart or cabinet.
•The 2-port hub provides 2.1 Amps per port. The 4-port hub provides 1 Amp per port.
Product
Weight
Part #
Price
2-port USB Charging Hub
1 lb.
955BK
$29.95*
2-PORT HUB SHOWN
4-port USB Charging Hub
1 lb.
941BK
$39.95*
LAPTOP SOLUTIONS
ERGOTRON LT20/LT30 LAPTOP CHARGING CARTS. BUILT WITH ANTHRO-DNA.
C
LT20
B
LT30
A
•Simple charging and robust security from our earliest cart.
•Roomy bays support just about any size notebook. Bays on the 20-unit cart are 15.5"w x 12"d x 3"h.
Bays on the 30-unit cart are 16"w x 12"d x 3"h.
•Keyed locks and 2-point locking system protect enclosure.
•Use the cart as a teaching station, too! External outlets power equipment used on top.
•Comes in Silver Metallic (SM) with shelves and handles in White (WH). Ships assembled.
•TAA compliant.
PRODUCT
Height
Width (A) Width (B)
Depth (C)
Weight
Part #
Price
LT20 45.5"25.5"18.5" 29.5"
246 lbs.
LTSC20WH/SM
$1,599
C
B
A
C
C
B
LT30
38"
42.5"
36.5"
29.5"
334 lbs. LTSC30WH/SM $1,999
A
B
A
1/16
Charging
Quick Ship items usually ship within 1-3 business days.
Too see if your product on the list, go to page 39.
anthro.com • 800.325.3841
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising