Tools for Cable Terminals and Connectors ErgoCrimp Plus® for 22

Tools for Cable Terminals and Connectors ErgoCrimp Plus® for 22
TOOLS FOR CABLE TERMINALS
www.cooperhandtools.com/xcelite
Tools for Cable Terminals and Connectors
Xcelite® ErgoCrimp Plus® Mechanical Crimping Tools
• ErgoCrimp Plus® are the world’s most advanced crimping tools to date
• With a patented design, they deliver up to 50% better mechanical gain than any other kind
• With increased mechanical gain you will get significantly lower handle force which could result in an increase in productivity
These crimping tools have been designed to achieve maximum
Their main features are:
One-Handed Crimping
• The handle force needed for the crimping operation in
most tools exceeds 60-70lbs. (27-32Kg)
• The average man and virtually all women cannot
make a comfortable one-handed crimp
• Xcelite® crimping tools are designed with such a low
handle force requirement that the crimp operation can
be performed with only one hand
Xcelite
Crimping Pressure
• The configurations of the crimping nests and indentors
are designed to increase the tensile strength of
the crimp
• The jaw pressure applies is scientifically calculated
for optimum connections
Reliability
• All components are made of high-quality Swedish
steel and have been life tested for 50,000 cycles
• Precision manufacturing guarantees a uniform product
of high accuracy
• After long wear, it is always possible to check the
crimp dimensions with go/no-go gauges, and to adjust
for eventual discrepancies by turning the patented
excenter adjustment plate
comfort, reliability, and durability.
Size
• Size has been minimized to allow single-handed
operation and to ensure the tool fits easily into
repair kits
Safety
• A ratchet device has been built in to guarantee that
the user makes the exact same complete crimp
every time
• Should the user start a faulty crimp, a safety release
mechanism is built into the ratchet, allowing the user,
with one finger, to open the tool before the cycle
is complete
Economy
• Because of their considerable advantages in quality,
speed, and efficiency, the payoff time for an
investment in Xcelite® tools is extremely short
ErgoCrimp Plus® (ECP-000 Frame)
Length: 10.0"
Weight: 1.2lbs.
ErgoCrimp Plus® for 22-10 AWG Insulated
Terminals and Splices
• ECP000 large ergonomic frame for large hands
• D100 die set for 22-10 AWG red, blue and yellow
insulated terminals and splices
• Mechanical gain estimated 50%
• Guaranteed for at least 50,000 cycles
• Variety of die sets available
82
Cat
No.
UPC
No.
Packed
Description
lb
Pack Wt.
kg
Shelf
Pack
ECP100
037103059307
Boxed
ECP000 frame and D100 die set
1.2
0.54
1
D100
037103059345
Boxed
Die set for ECP100
-
-
1
www.cooperhandtools.com/xcelite
TOOLS FOR CABLE TERMINALS
ErgoCrimp Plus® for 22-10 Non-Insulated
Terminal Splices
• Die set designed for 22-10 AWG non-insulated terminal
splices
• Patented ergonomic design makes this tool easy and
comfortable to use
• Lowest possible handle forces required
• High quality construction with tight tolerances
• Superior crimp die design insures the highest quality crimp
results
• High strength through-hardened alloy steel and precision
manufacturing
• Guaranteed for 50,000 cycles
• Precise eccentric adjustment for consistent performance for
life of tool
• Tools can be purchased complete with die set or separately
• Special dies are also available upon request
Cat
No.
UPC
No.
Packed
Description
lb
Pack Wt.
kg
Shelf
Pack
ECP101
037103197146
Boxed
ECP101 frame and D101 die set
1.4
0.64
1
Frame only - ErgoCrimp Plus® Crimping Tool
•
•
•
•
Large ergonomic frame for large hands
Length 10"
Width 2.83"
Used with D100 through D109 die sets
Xcelite
Cat
No.
ECP000
UPC
No.
Packed
Description
037103059338
Boxed
ErgoCrimp Plus® crimping tool-large
lb
Pack Wt.
kg
Shelf
Pack
1.00
0.45
1
ErgoCrimp® Die Set for Insulated Terminals and Splices
• For 22-10 AWG red, blue and yellow insulated
terminals and splices
• Precision-machined hardened steel
• Fits ErgoCrimp® and ErgoCrimp Plus® tools
Cat
No.
D100
UPC
No.
Packed
Description
037103059345
Boxed
Die set
Shelf
Pack
1
83
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising