Vacuum cleaner FC9150/01
Vacuum cleaner
FC9150/01
Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
ACCESSORIES
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
- Nozzle
- Tubes
- Accessories
TECHNICAL INFORMATION
- Coupling
- Colour
- Power consumption
(IEC) 230V
- Maximum Air displacement
- Vacuum
- Type number dustbag
- Duststorage capacity
- Cord length
- Fiter system
: Dark Demin
: 1800 W
:
:
:
:
:
:
:
:
- Dimensions of cleaner
- Dimensions of packaging
- Net weight
Published by Philips Consumer Lifestyle
12/09
:
:
:
40 l/s
290 mbar / 29.0 kPa
FC8021
4L
9m
Double layered
compatible s-bag™
3 layer permanent motor
protection filter
Ultra Clean Air HEPA13
exhaust filter
472 x 324 x 276 mm
593 x 393 x 296 mm
6.3 kg
Printed in the Netherlands
- Accessory storage
: Tri-Active all purpose nozzle
: Metal lacquered telescopic tubes
: Brush, crevice nozzle and
small nozzle
: Active accessory storage bridge in
handgrip
: Button coupling
OPTIONAL (accessories)
-
FC 8021
FC 8022
FC 8023
FC 8024
FC 8030
- FC 8031
:
:
:
:
:
S-bag Classic
S-bag Clinic
S-bag Anti-Odour
S-bag Long Performance
Super Clean Air filter, High-Flow
AFS exhaust filter
: Super Clean Air HEPA filter,
HEPA12 exhaust filter
© Copyright reserved
Subject to modification
FC9150/01
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
REPAIR INSTRUCTION
- Open the appliance, first remove the filter cover (item 22)
and then remove the 2 screws (A) of the button assy
(item 10).
- The button assy can be removed by lifting up the back of
the assy and then pull the assy out of the appliance.
- When the dustcover and the handle have been removed, the
electronics, DBFI valve assy, CW-lever and the switch lever
can be removed.
- The dustchamber and the backpanel can be removed from
the appliance by removing 15 screws (B and C).
- You will require a screwdriver with a 14.5 cm long shrank
for this. Screwdriver 4322 009 08490 for T15 can be used.
- When the cordwinder has been taken out, the final screw
(D) for releasing the lower front from the appliance can be
removed.
- When the repair is finished, check whether all functions of
the appliance work properly.
- To disassemble the cordwinder, use TORX screwdriver no.
T10, which is one of a set consisting of T20; T15; T10; T9;
T8; T7 and T6 (code number 4822 395 505145).
- Cotton dustbags, are used in countries in which paper
dustbags are not available.
- If the reel half spring unit is replaced, shaft G must be
lubricated with silicone grease. Do not apply any silicone
grease to or spill any grease on terminals (37) or conductors
(36).
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.
- Item 14, air valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.
- If the function of the electronic control unit is not required,
the Triac must be short-circuited in the manner shown in
the circuit diagram.
- When the vacuum cleaner is used to suck up fine dust the
pores of the dustbag may become clogged, causing the
passage of air through the dustbag to become obstructed.
As a result, the dustbag-full indicator will indicate that the
dustbag needs to be replaced, eventhough the dustbag is not
full at all.
ELECTRICAL DIAGRAM
Blue
CORD WINDER
Brown
Black
Short-circuit
S
hort-circuit
ort-circu t
M
Ti c
Triac
Black/White
MOTOR
POWER
MODULE
2-7
FC9150/01
PARTS LIST
Pos
Service code
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
4322 005 17390
4322 005 17600
4322 000 67810
4322 003 24790
4322 003 24780
4322 000 37300
4322 003 23820
4322 003 24650
4322 009 09330
4322 009 09340
4322 003 24810
4322 003 24590
4322 006 22750
4322 005 17330
4341 003 02390
4322 003 24620
4322 003 24720
4322 003 24600
4322 003 24910
4322 005 17010
4322 003 24690
4322 003 24900
4322 004 92980
4322 001 73360
4322 000 38790
= changed
Description
Pos
Service code
Dustcover / Dark Denim / LB Pr
Dustcover lock assy
DB detector spring
DB detector / LB / Cool grey
CCC (DB holder)
Triple inletfilter
Inlet grille
Dustchamber / Black
Handle performer / FC9150
Button panel assy / Pr / FC9150
Cord winder lever
Control wheel
PCB assy 220-240 V 50/60 Hz
DBFI/Valve assy / LB
Switch lever
Back panel / Black
Cord outlet / Black
Lower / LB / Back
Lower front / Dark Denim
Caster assy / Select grey
Filter cover lock / Select grey
Filter cover / Dark Denim
Hepa 13 filter
Exhaust sealing
Silencer 4 wall backpanel
26 4322 003 23220
27 4322 000 38670
28 4322 000 38770
29 4322 003 23880
30 4322 001 73400
31 4322 006 99151
32 4322 000 38820
33 4322 001 73520
34 4322 003 23870
35 4322 009 07940
36 4322 009 07950
37 4322 009 07970
38 4322 006 01720
39 4322 006 01410
40 4322 003 18850
41 4322 005 12760
42 4322 005 12720
42a 4322 004 22630
43 4322 007 16000
44 4322 004 22510
45 4322 001 99120
46 4322 007 45550
47 4322 004 22570
48 4322 003 18870
49 4322 005 12530
50 4322 004 22560
51 4322 004 23200
52 4322 003 26030
Description
S-class H-sealing
Silencer 1 wall
Silencer 2 bottom
Motorhousing top inside
Bufferring front ANS-Atlas
Motor 1761 230V 50-60Hz AW
Silencer 3 compas
Motor buffer back green
Motor housing bottom ANS
Reel half spring unit (L = 9 m)
Reel half contact unit
Contact ring plate
U.K. / H.K.
L = 9.3 m
Euro 4.8 mm pins
L = 9.3 m
C. Bend B1
LC Swivel assy
C. Bend B1 / Hose / Swivel assy
Conical hose assy / LC
Leaf spring assy
Telescopic tube Silver, Standard
Coupling bush
Coupling spring
Plumeau assy
Crevicle nozzle
Accessory bridge assy
Small nozzle
Tri-active nozzle / LB
Motor bracket
3-7
FC9150/01
EXPLODED VIEW
1
2
9
A
10
A
3
4
11
12
5
13
Y
Black/
White
Black
Z
blue
brown
14
B
15
B
6
7
B
B
B
B
8
4-7
FC9150/01
EXPLODED VIEW
21
C
22
C
16
C
C
23
C
C
24
C
C
25
C
26
17
27
18
28
D
19
20
5-7
FC9150/01
EXPLODED VIEW
29
30
31
Black/
White
Black
Y
32
52
33
34
35
36
F
G
38 + 39
blue
Z
brown
E
E
E
F
F
37
F
6-7
FC9150/01
EXPLODED VIEW
U.K. / H.K.
38
Swiss
Europe Ø 4.8mm
39
Italy
42
40
42a
41
44
47
48
49
50
43
45
46
51
7-7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising