TRAVEL TOUCHSCREEN LCD ALARM CLOCK (Model No.13057

TRAVEL TOUCHSCREEN LCD ALARM CLOCK (Model No.13057
TRAVEL TOUCHSCREEN LCD ALARM CLOCK
(Model No.13057)
OPERATING INSTRUCTIONS
Please read these instructions carefully and keep in a safe
place for future reference.
1
2
3
4
5
3. Press the "HOUR" (5) area as many times as necessary
until the correct hour is reached. Be sure to set AM/PM
correctly. AM/PM will appear in the upper left when setting
the hours. If the time & alarm are not set correctly to
AM/PM the alarm will not sound at the desired time.
4. Press the "MINUTE" (5) button as many times as
necessary until the correct minute is reached.
5. Press the "ALARM" (3) icon again to exit the alarm set
mode.
TO ACTIVATE THE ALARM AND SNOOZE
1. Press the "ALARM" (3) icon to enter the Alarm mode. The
"ALARM" icon will be flashing.
2. Press the Hour or Minute (5) area once. The Alarm Time
and Alarm On icon (4) will appear. The alarm is now
activated.
3. Press the Alarm On icon (4) once again to disable the
Alarm. The alarm time will disappear.
4. The alarm will sounds for 1 minute at the desired time.
5. When the alarm sounds, you may touch the screen (except
Alarm On icon) and the alarm will stop and will sound again
in approximately 8 minutes. The snooze process may be
repeated over and over again.
6. Press the ALARM ON icon (4) once to stop the alarm.
The alarm will sound again on the next day at the desired
time.
7. If you do not turn the alarm off, it will sound for 1 minute,
then turn itself off and reset automatically for the next day.
TO ACTIVATE THE LIGHT
Touch the screen to light the display for a few seconds.
NOTE: Frequent use of the LIGHT feature will shorten the
life of your batteries.
6
7
REMOVE THE ISOLATOR
TAB BEFORE OPERATING
TO ACTIVATE THE CLOCK
2 X L1154F button cell batteries (included).
Remove the isolator tab from the battery compartment.
TO SET THE TIME
1. Press the "TIME" (1) icon to enter the Time mode. The
"TIME" icon will be flashing.
2. Press and hold the Hour or Minute (5) area for 3 seconds
to enter time set mode. The Hour & Minute will be
flashing.
3. Press the "HOUR" (5) area as many times as necessary
until the correct hour is reached. Be sure to set AM/PM
correctly. AM/PM will appear in the upper left when setting
the hours. If the time & alarm are not set correctly to
AM/PM the alarm will not sound at the desired time. If the
AM/PM icon disappear, the clock is now in 24 hour mode.
4. Press the "MINUTE" (5) button as many times as
necessary until the correct minute is reached.
5. Press the "TIME" (1) icon again to exit the time set mode.
TO SET THE DATE
1. Press the "DATE" (2) icon to enter the Date mode. The
"DATE" icon will be flashing.
2. Press and hold the Year (5), Month or Date (6) area for 3
seconds to enter the Date set mode. The YEAR, MONTH
and DATE will be flashing.
3. Press the Year (5) area as many times as necessary until
the correct year is reached. Press the first 2 Year digit to
minus 1 year. Press the last 2 Year digit to add 1 year.
4. Press the "MONTH" (6) area as many times as necessary
until the correct month is reached.
5. Press the "Date" (6) area as many times as necessary
until the correct date is reached.
6. The day of week is automatically set in accordance with
the date.
7. Press the "DATE" (2) icon again to exit the time set mode.
TO SET THE ALARM
1. Press the "ALARM" (3) icon to enter the Alarm mode. The
"ALARM" icon will be flashing.
2. Press and hold the Hour or Minute (5) area for 3 seconds
to enter alarm set mode. The Hour & Minute will be
flashing.
TEMPERATURE FUNCTION
Touch the "TEMP" (7) area to select between Celsius
( C) and Fahrenheit ( F).
CHANGING THE BATTERIES
It is recommended that you replace the batteries annually,
even if the product is still running. Only use 2 X L1154F (1.5V)
button cell batteries in this clock. Do not mix old and new
batteries. Insert the batteries with the correct polarity. Remove
exhausted batteries from the clock. Remove the batteries if the
clock is stored or not in use.
Warning: Button cell batteries are dangerous if swallowed.
Always keep them out of reach of children and pets.
Please dispose of used batteries in a responsible manner. For
more information please contact your local authority.
MAINTENANCE
A soft cloth may be used to clean your clock. Do not use any
corrosive cleaner or chemical solutions on the clock. Keep the
clock clean and dry to avoid any problems.
YOUR GUARANTEE
Your clock is guaranteed for 12 months from the date of
purchase against any faults arising from defective materials or
manufacture. Damage caused through careless handling,
misuse or in transit is expressly excluded. Should this clock
fail within 12 months please return it in the first instance to
your retailer.
If you have any queries, problems or do not understand
any part of these instructions please contact:
Customer Help Line (01908)449208 or Locall 08451207208
Mon - Fri 9am - 4:30pm
Email for service: service@acctim.com or visit www.acctim.com
Environmental Protection
Disposal of electrical & electronic equipment.
Do not dispose of this product with household
waste. For the proper treatment, recovery and
recycling please take this product to the approriate
collection point. If you are unsure of where this is
contact your local authority. Improper disposal may
be harmful to the environment.
V.3.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising