UID8540 Color DMX Datasheet

UID8540 Color DMX Datasheet
UID8540 Color DMX Datasheet
1/4
ToBeTouched User interface
General description
The ToBeTouched UID8540 Color DMX user interface panel provides
direct access for selecting a specific color point on full-color DMX RGB
lighting systems. Direct access to a specific color point is provided via a
touch-sensitive backlit RGB color selection ring. The selected color can
be stored in one of the two user-defined presets available on the front
of the panel.
In the Dynamic modes it is possible to visualize the variety of colors or
morphing between two colors.
Building upon the iconic design and user-friendliness of the color ring
used in LivingColors, the ToBeTouched range of intuitive user interfaces
brings the same style and ease of interaction to professional lighting
applications.
The ToBeTouched range comprises various models. These range from
a simple on/off switch, plus a version with dimming, through to a cool/
warm-white controller and a full-color model. Assisting the user with
light, sound and color feedback, these easy-to-install interfaces make
operating a lighting system straightforward – and fun!
90mm
11mm
23mm 19mm
48mm
16mm
90mm
21mm
Dimensions in mm
48mm
UID8540 Color DMX Datasheet
ToBeTouched User interface
General device features
2/4
Locking the preset buttons
• Mode buttons for toggling
between functions: color,
saturation and intensity.
• On/off switch.
• Two Dynamic modes.
• Backlit light ring for direct
feedback / feed-forward and an
attractive appearance.
• Preset buttons for selecting a
user-defined preset.
• Proximity detection.
• Audio feedback.
• RJ45 connector for connection
to PSU and DMX output.
• Lock the preset buttons against being overwritten
by pressing the color and intensity buttons.
simultaneously for 4 seconds. When presets are
locked they cannot be stored or reset.
• Audio feedback: locked - single beep / unlocked
- double beep. In locked mode the device gives
a failure beep indicating that it is not possible to
store or reset presets.
Audio
The device supports the user with audio feedback.
• Short/long beep: when storing/resetting presets.
• Single/double beep: when toggling between
muted/unmuted state and between locked/
unlocked preset.
• Device clicks: when touching/sliding the ring and
touching/pressing a mode/preset.
• Pressing the ring at 3 o’clock and 9 o’clock for
more than 4 seconds will toggle between muted
and unmuted state. When muted state is set a
single beep will sound; when unmuted state is set
a double beep will sound.
Functionality of mode buttons, preset buttons and on/off
switch
On/off
• On/off switch: turns all lights on or off.
Color
• Color button: activates the RGB color ring and
allows color to be adjusted.
• Saturation button: activates the saturation ring and
allows saturation to be adjusted (from full white to
a fully saturated color).
• Intensity button: activates the intensity ring and
enables intensity to be adjusted (minimum dim
level is DMX value 1).
• Preset buttons: for selecting static presets (userdefinable).
Saturation
Intensity
/
Static
presets
selection
Dynamic modes
Rainbow mode
In this mode the lighting smoothly runs over all the
available colors. The Saturation and Intensity can still
be adjusted by selecting the mode and using the light
wheel.
• To enter the Rainbow mode, double-click on the
On button.
• To leave the Rainbow mode, click the On button
once to go to the Static mode. To go to the
Bounce mode, triple click on the On button. To
turn off the lights, press the Off button.
If the intensity is low (<25%) and the user chooses another color or
saturation, the device will automatically increase the intensity to 25%,
in order to support the feasibility of the change.
Adjustment of preset buttons
Bounce mode
• Presets can be recalled by briefly touching a preset
button.
• Presets can be stored by holding down the preset
buttons (for 3 seconds). The ring indicates the
progress by gradually filling up (clockwise). The
clockwise
device indicates with a short beep that the setting
has been stored.
• The upper half of the on/off switch can be used
as a preset. If defined as a preset, the device will
always set the lights to the chosen light setting. If
no preset is defined, the device will set the light to
the light setting last used.
counter clockwise • If a preset button is held down for longer than 7
seconds, the factory default setting is restored. The
ring indicates the progress by gradually filling up
for a second time (counterclockwise). The device
indicates with a long beep that the factory default
setting has been restored.
• Factory default preset 1: red; preset 2: green; on/off
switch: last light status.
In this mode the device smoothly changes between
two light settings, stored under preset 1 and preset 2
(left and right).
• To enter the Bounce mode, triple-click on the On
button.
• To leave the Bounce mode, click the On button
once to go to the Static mode. To go to the
Rainbow mode, double click on the On button.
To turn off the lights, press the Off button. Adjusting Dynamic mode speed
5’
2’
1’
10’
25”
30’
60’
5”
To adjust the speed at which the device changes
color, you can make a selection from the different
durations, see picture on the left side. When the
fastest time (5 seconds) is selected, the whole light
ring will be lit blue. When 60 minutes is selected, only
the first section will be blue. The left mode LED will
also blink. When the fastest time is selected, the LED
will blink fast. When the longest time is selected, the
LED will blink slowly.
UID8540 Color DMX Datasheet
ToBeTouched User interface
3/4
Proximity detection & Sleep mode
Switch Caps
• The device wakes up, showing the color ring, when a finger comes
within 15 cm of it. Make sure that the ground wire is properly
connected to the PSU (UIA8550, 9137 003 38603).
• If no one is within range of the device after 15 seconds, the backlight
is switched off and the device goes into sleep mode.
Two switch caps are provided with the UID8540 to customize the look
of the device to the user’s own preference. By rotating the caps, multiple
configurations are available, providing total flexibility. The caps can easily
be changed using a small screwdriver, as shown in the picture.
Included in the package
• UID8540 Color DMX user interface device
• Wall bracket
• Switch caps (2x)
• Quick user guide
• Installation instructions
on
off
3
2
1
Connections
Cat 5 / RJ-45
Data cable
Max. 100 M.
Min. 48V
100 - 240V
OUT
RJ-45
IN
Power
Supply
Unit
DMX
DMX
DMX
Luminaire
DMX
Luminaire
DMX
DMX
Luminaire
After 29 devices
a DMX booster
is required
DMX
PSU needs to be ordered separately (UIA8550).
UID8540 Color DMX Datasheet
ToBeTouched User interface
4/4
Technical data
Environmental conditions
-25 to +70˚C
+60˚C with 95% humidity
Operating conditions
Temperature
+5 to +50˚C
Relative humidity
20% to 85%, no condensation
IP
20
The UID8540 should not be exposed to direct sunlight or to high
temperatures and should not be used in damp rooms such as
bathrooms.
Electrical
Power supply input
Dimensions PSU
Controller input Power consumption UID & PSU
100 to 240 VAC, 50/60 Hz 140 x 65 x 36 mm
48 VDC
(max. 100 meter cable length
between PSU and controller)
(max. 300 meter between
installation and booster)
Active typical <7W
Active max. <10W
Standby approx. 5W
UID8540 COLOR DMX
Ordering Data
Type
UID8540 COLOR DMX
UIA8550 ToBeTouched PSU
3222 636 30664
11/2011
Data subject to change
www.philips.com/lightingcontrols
Box dimensions
(mm)
113x113x61
MOQ
1
1
IEC 3-pin
RJ-45
Approvals
Power supply
Controller
cUL/UL, CE, TUV, FCC
CE, UL E230727
DMX pin assignment
RJ-45 7, 8
2
1
3, 4, 5, 6
Pin Function
GND (connected to ground)
Data Data +
not used
Best performance is achieved when using a shielded Ethernet cable.
36mm
Control
Control interface
DMX 512
Control channels
512
ColorRGB
Channel
1, 2, 3 repeated until 512
Packing data
Type
Connections
AC power (power supply)
DC power in / DMX data out
65mm
Storage conditions
Temperature
Relative humidity
140mm
Dimensions Power Supply Unit (UIA8550)
Qty
Material
1
cardboard
Ordering number
9137 003 35503
9137 003 38603
EAN code level 1
8727900 873528
8727900 886832
Weight (Kg)
net
0.108
EAN code level 3
8727900 873535
8727900 886849
gross
0.193
EOC
873528 00
886832 00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising