Matisse - DMG SpA

Matisse - DMG SpA
Matisse
T F T H I G H - R E S O L U T I O N
G R A P H I C S E R I A L D I S P L AY
Installation
Manual
Vers. 2.2 - English
93010172.EN_E_disp.TFT-Matisse_130527_v2.2.cdr
Matisse TFT GRAPHIC SERIAL DISPLAY
INDEX
1.
Product description
1.1
1.2
1.3
Technical features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
Main functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
3
3
4
2.
Connections
2.1
2.2
2.3
2.4
Operating mode selection
Diagnostic leds . . . . . .
Basic connections . . . .
Advanced connections . .
pg.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
pg.
5
pg.
pg.
pg.
pg.
5
5
6
7
pg.
9
3.
Programming through the menu
3.1
3.2
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
Menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg.
4.
Personalization through the software
4.1
4.2
4.3
4.4
Description . . . . . . . . . . . . . . .
Workspace . . . . . . . . . . . . . . .
Main data entry . . . . . . . . . . . . .
Advanced data entry (advanced users)
5.
Mounting instructions
2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
9
9
pg.
23
pg.
pg.
pg.
pg.
23
24
25
26
pg.
30
Matisse TFT GRAPHIC SERIAL DISPLAY
1 - Product description
"Matisse" is a programmable TFT graphic display with serial connection, which can show images,
short videos and audio files. Its V-max version can also read an external video signal coming from one
or more cameras, i.e. for extended interavtive safety applications.
1.1) -Technical features
• Dimensions:
7" (178x144x23/24 mm) 10,2" (241,6x169x34,5 mm)
• Screen:
7" (155X94 mm) 10,2" (222x132,5 mm) • 65.000 colours • Resolution: 800x480 pixel
• Power supply:
12Vdc +/- 10% (10.8 - 13.2 Vdc) • 24Vdc +/- 10% (21.6 - 26.4 Vdc)
• Absorption:
Max 600mA (12Vdc) / Max 300mA (24Vdc)
• Input ALARM SENT/COMMUNICATION ESTABLISHED:
12-24Vdc +/- 10% (opto-isolated, impedance= 3Kohm)
• Input TRIGGER:
Free potential contact, NON opto-isolated input (do NOT supply)
• Local video input:
- Composite video (CVBS, 1Vpp-75ohm), PAL/NTSC format
• Serial connection for landing signals:
- LM-LP serial asynchronous port : 1200/9600 baud (auto bauding)
- 9bit, no parity, 1 bit stop
ATTENTION:
- Use twisted cables for LM-LP signals and power
- Be sure NOT TO EXCEED the use limits of the flat cable used (current and signal
propagation)
1.2) -Main functions
• Floor position and direction indicator
• Indicators on serial line: "Alarm sent", "Communication established", "Overload", "Emergency
operation" (only with Playboard controller), "Firefighters priority" (only with Playboard
controller)
• On board display indicators: "Alarm sent", "Communication established", + 5 additional
indicators (with DMCTFT interface board).
• Installation data
• Voice annunciator feature
• Service or information short videos player
• Onboard programming through 4 function keys
• Internal diagnostic (3 leds)
• Menu in 5 languages
• Date/time visualization
• USB / SD card connection
• "Mosaic" software available for easy personalization of graphics via external PC
• V-max version: 2 separated video inputs (local and remote) for extended video surveillance
applications
The TFT Matisse belongs to the "Class 1" family, as definited by ISO-9241 standard.
3
Matisse TFT GRAPHIC SERIAL DISPLAY
1.3) - Layout
RFG12236993
2009
8 Pers.
3
640 kg
Èp È vietato l'uso dell'ascensore ai minori di anni 12 non accompagnati
Èp Children under the age of 12 must be accompanied by an adult
00168
Èp L'usage de l'ascenseur est interdit aux enfants de moins
de 12 ans
non accompagnés
DPR399WB637/2004
Not used
CAN protocol terminal screws
USB
Remote Video IN (*)
Local Video IN (*)
Audio OUT
Audio IN
Modem (future uses)
LAN
LM-LP Serial
Power supply 12/24Vdc
Function
Keys
ENTER
UP
DOWN
ESC
ENTER
INTERFACE SELECTION
ON
SD
CARD
X-DISPLAY
RESET
ON
DEUM INPUT
ON
DEMO
1234
Voice annunciator trigger
Alarm sent
Communication established
ESC
www.dmg.it
TRIGGER
FOR VOICE
ANNOUNCER
RUN
DT7RSS00M.DV
POWER
CAN-H
GND
CAN-L
REMOTE VIDEO IN
LOCAL VIDEO IN
AUDIO OUT
MODEM
(RESERVED)
LAN
AUDIO IN
(RESERVED)
12-24Vdc
+-
LM
LP
USB
DT7RSS00M.DS
FAIL / WARNING
X-DISPLAY
(*)
V-max version only
4
SD card
Matisse TFT GRAPHIC SERIAL DISPLAY
2 - Connections
2.1) - Operating mode selection
The operating mode of the TFT display can be changed through the dipswitch positioned on the back side.
DEMO MODE
ON
Automatic mode: loop visualization of the first 10 floors and its associated
images.
1 2 3 4
DMG SERIAL MODE (LM-LP)
ON
Display standard operating mode : controlled over 4 wires DMG serial bus or
directly from either DMG Playboard controller or third party controller via the
DEUM Encoder.
The DEUM Encoder (or the controller) provides car position and direction
through serial bus, together with other signals and gong signal (this one can
be used also for voice annunciator messages if the TRIGGER auxiliary input
is not used - see § 2.4 - Advanced connections).
1 2 3 4
Note: If the display is not receiving valid inputs via serial bus for more than 3
seconds, it will show "NS" (no signal).
2.2) - Diagnostic leds
Led Led
Power Run
Led
Fail
Display powered
0 sec
Display programmed and firmware loaded
Possibility to enter the restore mode (§ 3.2.4)
Display running
40 sec
= Off
= On
= Flashing
5
Matisse TFT GRAPHIC SERIAL DISPLAY
2.3) - Basic connections
Side A
RFG12236993
2009
8 Pers.
3
640 kg
Èp È vietato l'uso dell'ascensore ai minori di anni 12 non accompagnati
Èp Children under the age of 12 must be accompanied by an adult
00168
Èp L'usage de l'ascenseur est interdit aux enfants de moins
de 12 ans
non accompagnés
DPR399WB637/2004
LP
LM
-
Side B
- PITAGORA system
Emergency lamp
+
Side A
CVEMETFT1
Side B
ETSKSMP
(AMIGO 2 - ETSA2MRA)
Controller
AR+ AI+
ARAI-
16 POLES
TOC S
board
SERIAL
LINE
PLAYBOARD
D.M.G.
DMC PIT
16 POLES
LE
37 POLES
TRIGGER
over serial line
RFG12236993
2009
8 Pers.
3
Side A
640 kg
Èp È vietato l'uso dell'ascensore ai minori di anni 12 non accompagnati
Èp Children under the age of 12 must be accompanied by an adult
00168
Èp L'usage de l'ascenseur est interdit aux enfants de moins
de 12 ans
non accompagnés
DPR399WB637/2004
Controller
Side B
Emergency
telephone
AMIGO 2
ETSA2MRA
+12V
Encoder DEUM
ALIM+
LINE+
LINEALIM-
70 sec.
6
After switch on, wait about 70 seconds
for software to be fully loaded.
+
TRIGGER over serial line
Side A
LP
LM
-
Side B
- Other controller
Matisse TFT GRAPHIC SERIAL DISPLAY
2.4) - Advanced connections
Audio connections
Audio OUT
ESYSPK2
External loudspeaker
(for voice annunciator)
Network connections
(§ 3.2.1.6)
Modem
Modem
LAN
Future uses
Local
network
(*) Video connections
(§ 3.2.1.7)
Remote
(*) Remote
Video IN
(*) Local
Video IN
Local
Remote
(*) V-max version only
Remote
X-DISPLAY
S0 S1 S2 S5 S6
DMCTFT
G0 G1G2G3G4
TRIG
COM indicators (S1, S2, S5, S6)
and COM trigger
COM
The DMCTFT interface board
allows you to manage additional
indicators beyond the standard
ones.
DMCTFT
Additional
indicators
connections
Trigger
Indicators
S1, S2, S5, S6
Indicator S0
7
Matisse TFT GRAPHIC SERIAL DISPLAY
Other connections
TRIGGER command
for voice annunciator
NOT OPTO-ISOLATED
input (do NOT supply)
8
Input for
EN 81-28
signals
Matisse TFT GRAPHIC SERIAL DISPLAY
3 - Programming through the menu
3.1) - Function keys
Function keys allow access to the display configuration menu.
ENTER
Enter main menu and/or the detail of the selected option
Navigation keys through options at each level
ESC
Exit the current level and go to the higher one
RESET
Restart the display. Useful in case of firmware update (§ 3.2.2.2) and to
enter restore mode (§ 3.2.4)
3.2) - Menu map
3.2.1) - Settings
ENTER
3.2.1.1) Language
3.2.1.2) Preferences - set installation information, graphic theme and audio
volume
3.2.1.3)
3.2.1.4)
3.2.1.5)
3.2.1.6)
3.2.1.7)
Floor settings - set all parameters for each floor
Date/Time - set time, date and daylight saving time
Safe removal - safe removal of connected peripherals
Network settings - set network parameters
Audio/camera test - test multimedia advanced functions
3.2.2) - Update
ENTER
3.2.2.1) Graphic - set personalized configuration
3.2.2.2) Firmware - firmware update
3.2.2.3) Restore default - restore factory settings
3.2.3) - Help
ENTER
3.2.3.1) Info - see informations about the display local and additional memory
Help 1/2/3 - not implemented
3.2.4) - Restore mode
9
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1) - Settings
3.2.1.1) - Language
MATISSE V-max - TFT Graphic Display
Settings
Language selection
Language
Preferences
Italiano
Floor settings
Date/Time
Safe removal
English
Francais
Net settings
Audio / camera test
Deutsche
Espanol
Firmware Version 2.0 (Fri Oct 1 2010)
Note: Language selection will be effective only for menus and not for messagges
shown during the display operation.
10
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.2) - Preferences
MATISSE V-max - TFT Graphic Display
Settings
Language
Preferences
Floor settings
Date/Time
Preferences
Enable user configuration (background, floor images)
First visualization = Blank
Low power
Installation info
Nr. of floors: 12
Offset:
Safe removal
Speech synthesizer volume
Net settings
Day: 2
Audio / camera test
Night: 2
Night from: 20:30
Default background
Blue
-2
to: 08:00
Red
Yellow
OK
Firmware Version 2.0 (Fri Oct 1 2010)
Enable user configuration:
It allows to enable/disable a user configuration if it has already been loaded through
"Update" > "Graphic" (§ 3.2.2.1).
First visualization:
Not used.
Low power:
In this mode, the display will switch to "Low power" mode after 10 minutes of idleness.
Nr. of floors:
Set number of floors of the installation.
Offset:
Set the Offset value (positive or negative).
Speech synthesizer volume:
Set the volume (0÷4) for day time and night hours (vocal synthesis mode).
Default background:
Select the theme colour for the display operating mode.
Blue (default)
Red
Yellow
11
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.3) - Floor settings
MATISSE V-max - TFT Graphic Display
Settings
Language
Preferences
Floor settings
Date/Time
Safe removal
Net settings
Audio / camera test
Floor settings
Select floor symbol
Level
Symbol
Floor -2
Floor -1
Floor 0
Floor 1
Floor 2
Floor 3
Floor 4
Floor 5
Floor 6
Floor 7
-
2
1
0
1
2
3
4
5
6
7
Available symbols
0123456789ABCD
EFGHIJKLMNOPQRS
TUVWXYZ-+/\½
Select audio message
Firmware Version 2.0 (Fri Oct 1 2010)
Select floor symbol:
It allows to associate a number/letter/symbol (see list of available symbols) to
each floor.
The settings will be available only for those floors configured in "Settings" >
"Preferences" > "Installation Info" (§ 3.2.1.2).
12
Matisse TFT GRAPHIC SERIAL DISPLAY
MATISSE V-max - TFT Graphic Display
Settings
Floor settings
Select floor symbol
Language
Select audio message
Auto
Level
Audio
Preferences
Floor settings
Date/Time
Safe removal
Net settings
Audio / camera test
-2
-1
0
1
2
3
4
5
6
7
8
9
Search audio file
LOCAL
Deutsche
English
Espanol
Francais
Italiano
A_Messaggi_Piano_BASE
A_Messaggi_Servizio_BASE
Gong_1_Sale.mp3
Gong_2_Scende.mp3
SD
USB
DELETE
Versione Firmware 2.0 (Fri Oct 1 2010)
Select audio message:
It allows to associate a mp3 audio file to each floor for the voice annunciator
application.
Auto
In this mode, the audio files to be played at the floors are automatically
associated. The display will play, sequentially: Gong, floor number, the
elevator goes up\down.
Auto
Audio files can be imported from external memory (USB / SD card) or from
LOCAL library. Files imported from USB / SD are copied in the resident
memory for standard operation. You can remove USB / SD devices after
importing files.
The DELETE button doesn’t delete the file, but only its link to the floor.
USB
USB
SD card
13
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.4) - Date / Time
MATISSE V-max - TFT Graphic Display
Settings
Language
Date / Time Setting
Daylight saving time
Preferences
Region:
Europe
Floor settings
City:
Rome
Date/Time
Date/Time (local)
Safe removal
Net settings
2012/02/23 13:53
Audio / camera test
Synchronized from serial
OK
Firmware Version 2.0 (Fri Oct 1 2010)
Date / Time Setting:
You can set time and local times for the automatic switch to daylight saving
time, according to the selected country.
To disable this automatic function you need to select GMT as country and
configure time again.
ENTER
2010/02/23 13:53
ENTER
2010/02/23 13:53
ENTER
2010/02/23 13:53
ENTER
2010/02/23 13:53
2010/02/23 13:53
ESC
OK
Synchronized from serial:
Informations are retrieved from Playboard controller using the serial line.
14
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.5) - Safe removal
MATISSE V-max - TFT Graphic Display
Settings
Select device
Language
Remove USB
Preferences
Remove Secure Digital
Floor settings
Date/Time
Safe removal
Net settings
Audio / camera test
Firmware Version 2.0 (Fri Oct 1 2010)
USB / SD
Safe removal
Select device:
We advice to remove any connected device (USB / SD) using the
appropriate button.
If the button is enabled it means that the device is connected and
"recognized" by the display.
Remove USB
USB
USB
Remove Secure Digital
SD card
15
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.6) - Network settings
MATISSE V-max - TFT Graphic Display
Settings
Language
Net settings
Enable DHCP
Preferences
Static IP
Floor settings
IP Address:
Date/Time
Safe removal
Net settings
Audio / camera test
DNS
128._12._6._7
Subnet Mask: 255.255._0._0
Gateway:
Primary DNS:
127._0._0._1
Secondary DNS: 127._0._0._1
128._12._12._7
MAC Address
00:21:F3:06:01:B1
OK
Firmware Version 2.0 (Fri Oct 1 2010)
This menu allows to configure network parameters if you want to acces the display
in remote mode or to enable additional functions, which need an internet
connection.
Enable DHCP:
The display default configuration is DHCP mode; the display accepts a
dinamic "IP address" provided by a router and can automatically access
LAN/Internet without further settings.
Static IP:
Having a dinamic "IP address" (DHCP) can cause difficulties if you want to
access the display in remote mode; in this case it is easier to set a static
address in the display, so that it will be univocally traceable.
IP address: IP address requested by the display when connecting
Subnet Mask:
Gateway: IP address of the service provider
MAC address:
It is an unambiguous code of each display allowing to identofy it in the network.
Modem
Modem
Future uses
16
LAN
Local
network
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.1.7) - Audio / Camera test
MATISSE V-max - TFT Graphic Display
Settings
Test
Language
Audio Test
Preferences
Local Camera Test
Floor settings
Remote Camera Test
Date/Time
USB Test
Safe removal
Secure Digital Test
Net settings
Audio / camera test
Firmware Version 2.0 (Fri Oct 1 2010)
Audio Test:
Loop reproduction of the first 4 floor messages.
(*) Local Camera Test:
Shows a preview of the local
video input.
(*) Remote Camera Test:
Shows a preview of the
remote video input.
Remote
Camera
Local
Camera
USB Test:
Reading/writing test of USB device.
USB
Secure Digital Test:
Reading/writing test of the SD memory.
(*) V-max version only
17
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.2) - Update
3.2.2.1) - Graphic
MATISSE V-max - TFT Graphic Display
Update
Graphic update
Graphic
Firmware
Start graphic update
Update Info
Restore default
graphic-100226.miss
config-A5-100113.miss
skycreaper-59-st.miss
mario-rossi-07.miss
Additional notes:
Impianto via Veneto
palazzina A - scala B
Press ENTER to continue, or ESC to cancel
Firmware Version 2.0 (Fri Oct 1 2010)
Graphic update:
It allows to import from an external memory (USB / SD) a ".miss" file, which contains a
personalized configuration with wallpapers and images associated to floors.
".miss" files can be read using the appropriate software "Mosaic" (§ 4). During file
processing any additional note (if any) will be shown.
USB memory only: If the file is named "auto.miss", the display automatically detects and
installs it, without user intervention.
1
USB
2
3
Graphic update
graphic-100226.miss
config-A5-100113.miss
skycreaper-59-st.miss
mario-rossi-07.miss
USB / SD
4
18
ENTER
5
Safe removal
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.2.2) - Firmware
MATISSE V-max - TFT Graphic Display
Update
Firmware update
Graphic
Firmware
Start firmware update
Update Info
Restore default
Firmware update x.x
Date: xx / xx / xxxx
Author: Simone Iori
Firmware Version 2.0 (Fri Oct 1 2010)
Firmware update:
It allows to modify the firmware or add new features.
The update is a ".bz2" file and is distributed by DMG SpA through its website
www.dmg.it.
USB memory only: If the file is named "auto.tar.bz2", the display automatically detects
and installs it, without user intervention.
Once the update is completed the display needs to be restarted.
1
USB
2
Firmware Update
3
ENTER
4
RESET
19
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.2.3) - Restore default
MATISSE V-max - TFT Graphic Display
Update
Graphic
Firmware
Restore default
Restore Default
Start restore
WARNING!
Restore will bring back the display to default factory settings, deleting all user files and
custom settings (images, audio, logos etc.)
Firmware Version 2.0 (Fri Oct 1 2010)
Restore Default:
The display original factory settings will be restored and all user’s files and
configurations will be deleted.
20
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.3) - Help
3.2.3.1) - Info
MATISSE V-max - TFT Graphic Display
Help
Info
Help1
Help2
Help3
Info
Local memory:
Total: 2048 Kb
Free: 1744 Kb (85%)
Additional memory (SD): Not found
Total: xxxx Kb
Free: xxxx Kb (xx%)
Firmware Version 2.0 (Fri Oct 1 2010)
Info:
Information about local and additional memory (if any).
Help1/2/3:
Not yet implemented.
21
Matisse TFT GRAPHIC SERIAL DISPLAY
3.2.4) - Restore mode
This is an emergency mode to restore the firmware in case it doesn’t load
automatically; it inhibits the update from menu (§ 3.2.2.2).
Follow the steps below:
1
RESET
2
Led Led
Power Run
Led
Fail
Wait until the Led Fail to light up for a few
seconds.
3
ENTER
4
Select "Firmware update" and press ENTER.
ENTER
MATISSE V-max - TFT Graphic Display (recovery mode)
System recovery
Firmware update
Update Info
22
5
RESET
Matisse TFT GRAPHIC SERIAL DISPLAY
4 - Personalization through the software
4.1) - Description and start
Versione 2.0
Copyright © 2008-2010 - DMG S.p.A.
Mosaic software allows to create porsonalized configurations with sounds,
wallpapers and images associated to floors.
Output file (.miss) must be copied on external memory (USB/SD) and will be
uploaded by the display through the menu "Graphics update" (§ 3.2.2.1).
Creazione Workspace
Working directory has not been set yet, or it is unavailable. Select "Yes" to create default one (C:\Matisse) or "No" to select another
path.
Yes
No
Once the software is installed, when you first run
it, the system will ask to create a directory where
your configurations will be saved.
Before starting a new project
you must specify the
configuration name.
New Configuration
Configuration name
Resolution
800 x 480 (7")
Max. 16 chars.
Config name must start with a letter.
characters permitted: alphanumeric, "-" and "_"
OK
Cancel
23
Matisse TFT GRAPHIC SERIAL DISPLAY
4.2) - Workspace
Options
Select Language
Select mode
Italiano
Advanced user
English
Advanced data entry (advanced users)
- see § 4.4
Francais
Espanol
Deutsch
Simulation
In this area you can enter
addition data to better simulate
the configuration preview; these
datas won’t be exported.
OK
Export
After creating a configuration, press this
button to export it as a ".miss" file.
MATISSE Mosaic
File Options ?
Simulation
Floor symbols
Floor images and
messages
Insert characters to
visualize (%=½)
Modify
Arrows
Logo and plate
Indicators
2
None
Comm. established
Emergency lamp
Alarm sent
Candela
Ret. to floor
Firefighter
Overload
Slide
Images
0
Zoom
100%
Modify
0000000000000000
2010
Template color
Blue
8 Pers.
Custom background
Resolution: 800x480px
Load
Change
Delete
Additional note (50char)
2
SOVRACCARICO !
OVERLOAD !
SURCHARGE !
24
Enter
In this area you enter the data
which will be exported towards
the display.
630 Kg
CE
0000
0000000000000000
Display preview
Double click on an area will get you to data
modify window.
Matisse TFT GRAPHIC SERIAL DISPLAY
4.3) - Main data entry
Here you can enter the number of floors and offset. You can link (double click) a picture jpg/png or mp3
audio file to each floor, both showed/run when the lift reaches that floor level. Images are best viewed
with 588x480px; bigger images can be also easily cropped through built-in feature.
Assign Images
0
Offset
Image
Volume
Day:
Automatic selection
of audio messages
Num.of Floors 4
ITA
ENG
ESP
DEU
Floor
Audio file
0
No audio
1
No audio
Night:
2
2
FRA
Night from: 20:30
Delete Image
Here you can set the day volume
and the night volume.
to: 08:00
Delete Audio
Automatic selection
of audio messages
2
No audio
3
No audio
In this mode, the audio files to be
played at the floors are
automatically associated
Optimal resolution for imported images
is 588x480px. If resolution is different,
image can be automatically scaled.
Enter a logo (on top) and the installation
data (on the right).
Change Logo and Plate
Floor images and
messages
Double click to insert logo (max 588x128px)
Modify
Logo and plate
Modify
Template color
Blue
Custom background
Resolution: 800x480px
Load
Change
Delete
Additional note (50char)
Select one of the available theme colours.
Available space for
additional notes, useful in
case of graphics update
(§ 3.2.2.1)
Enter a wallpaper image to replace the above standard
themes.
25
Matisse TFT GRAPHIC SERIAL DISPLAY
4.4) - Advanced data entry (advanced users)
4.4.1) - User template
Size, position and font of every single area of the display, except for signalization (see 4.4.2), can be
set in this screen.
MATISSE Mosaic
File Options
0,0
?
800 px
Y
X
00
Select mode
Display area
(800x480 px)
H
Advanced user
W
480 px
Customizable area
(W:0, H:0 = OFF)
Field 1
User template
y: 333
x: 588
w: 212
h: 100
Font: Swiss721 Cn BT
Size 70
Modify
Forecolor
Backcolor
Indicators
Modify
Weight 25
Set the number of floors to be displayed
in the "DEMO MODE" (see § 2.1)
Demo floors
User Images
Percent. spacing 70
Word spacing - 5
10
Modify
In this mode, the display will switch to
"Low power" mode after 10 minutes of
idleness.
Low power
Video Zone
Auto
Modify
First visualization
Zero
NOT USED
Blank
Weather Widget
x: 588
= Weather ON
Celsius (°C)
Fahrenheit (°F)
= Weather OFF
y: 150
Metric units
w: 212
h: 198
WOEID: 721943
Imperial units
Hide
WOEID (Where On Earth IDentifier):
It is an unique reference ID
code given from Yahoo to
identify a location.
Info: it.meteo.yahoo.com
it.meteo.yahoo.com/italia/lazio/roma-721943
Warning:
The customization of dimensions and
positions of the various areas could led
to an overlap of the same areas
26
Matisse TFT GRAPHIC SERIAL DISPLAY
4.4.2) - Indicators
Dimensions, position, font and text of the signalization area messages can be setup in this screen.
MATISSE Mosaic
File Options
Factory setting
Default signalations
?
Customizable
ÈpAllarme inviato: restare calmi ed attendere la risposta del Servizio Assistenza
ÈpEmergency alarm sent: please stay calm and wait for the answer from Service Center
ÈpAlarme envoyée: restez calmes et attendez la réponse du Service d'Assistance
Type: Text + Images
Select mode
Advanced user
ÈpAllarme inviato: restare calmi ed attendere la risposta del Servizio Assistenza
ÈpEmergency alarm sent: please stay calm and wait for the answer from Service Center
ÈpAlarme envoyée: restez calmes et attendez la réponse du Service d'Assistance
Text
Images
User template
Modify
Indicators
0,0
800 px
Modify
X
Customizable area
Y
User Images
(W:0, H:0 = OFF)
W
Display area
(800x480 px)
Modify
ÈpAllarme inviato: restare calmi ed attendere la risposta del Servizio Assistenza
ÈpEmergency alarm sent: please stay calm and wait for the answer from Service Center
ÈpAlarme envoyée: restez calmes et attendez la réponse du Service d'Assistance
H
Video Zone
480 px
Modify
x:
0
y: 360
w: 588
h: 120
Font: Swiss721 Cn BT
Size 25
Forecolor
DMCTFT
Backcolor
Word spacing
Percent. spacing 100
0
Weight 25
S0 (No signalations)
G0 G1G2G3G4
S0 S1 S2 S5 S6
COM
X-DISPLAY
TRIG
È vietato l'uso dell'ascensore ai minori di anni 12 non accompagnati
Children under the age of 12 must be accompanied by an adult
L'usage de l'ascenseur est interdit aux enfants de moins de 12 ans non accompagnés
DMCTFT
For connections to the
DMCTFT board see § 2.4
Insert the text to be associated to the image.
Double click to insert a new image to
substitute the previous one.
27
Matisse TFT GRAPHIC SERIAL DISPLAY
4.4.3) - User Images
In this screen up to 8 images can be associated to whatever area of the display. Moreover, it is
possible to associate every image to one ore more of the existing signalisations.
MATISSE Mosaic
File Options
?
800 px
0,0
Select mode
Y
Advanced user
X
Display area
(800x480 px)
H
User template
W
480 px
Customizable area
(W:0, H:0 = OFF)
Modify
Indicators
User image 0
x:
Modify
0
y: 360
w: 588
h: 120
User Images
Segn 0 - Emergency lamp
Modify
Segn 1 - Candle
Video Zone
Modify
Segn 2 - Firefighters
DOUBLE CLICK to
insert image
Segn 3 - Comm. established
Segn 4 - Alarm sent
Segn 5 - Return to floor
Segn 6 - Overload
Image dimension: no image
The image screen dimensions (w,h) must be set before
entering the image itself.
If no signalization is associated, the image will always be
shown on the display
28
Matisse TFT GRAPHIC SERIAL DISPLAY
4.4.4) - Video Zone (V-max version)
Here you can enable up to 8 video zone.
Only one video zone can be activated at once. In case of two or more video zone, will be shown the
video zone with lowest index (video zone 0, 1, 2, 3, .....).
MATISSE Mosaic
File Options
800 px
0,0
?
Y
display area
(800x480 px)
video zone dimensions:
0x0 (OFF)
400x240 px
800x480 px
X
Select mode
Video Zone
Advanced user
480 px
Video Zone 0
Input type
User template
Modify
Indicators
Modify
x: 100
y: 100
dim:
400x240
Single
Remot Video IN
Segn 0 - Emergency lamp
Local Video IN
Segn 1 - Candle
Multiple (only Remote Video IN)
Segn 2 - Firefighters
Segn 3 - Comm. established
User Images
Trigger video
Managed by Playboard
Modify
Indicators
Video Zone
Segn 4 - Alarm sent
Segn 5 - Return to floor
Segn 6 - Overload
Modify
Managed by Playboard
Playboard controller handles the activation of video inputs.
Indicators
Every video zone con be associated to one or more of the existing
indicators.
Single / Multiple
Remote
Video IN
Local
Video IN
Single
29
Matisse TFT GRAPHIC SERIAL DISPLAY
5 - Mounting instructions
7") On 1 ÷ 1,5 mm faceplate (Kit RDT7S1)
7"
Faceplate cut-out
155,4x94,3 mm - R3
Kit RDT7S1
1
2
3
FAC
EP
LAT
E
BA
CK
PLA
TE
24h
4
Kit RDT7S1
3
9
6
AWAIT
1 mm
1,5 mm
30
Matisse TFT GRAPHIC SERIAL DISPLAY
7") With studs on 2÷3 mm faceplate
7"
Faceplate cut-out
155,4x94,3 mm - R3
132 mm
Studs M3x10
70 mm
70 mm
FAC
EP
LAT
E
10") With studs on 1,5÷3 mm faceplate
10"
Faceplate cut-out
222x132,3 mm - R3
158 mm
Studs M3x16
100 mm
100 mm
F
1,5ACEPL
÷ 3 ATE
,0
mm
1,5 mm
15/10
2 mm
10/10
3 mm
31
Error list
LE
The "EME +" input is active on the encoder
NS
No signal detected on the serial line
DMG SpA
Via delle Monachelle, s.n.c.
00040 POMEZIA (ROMA) • ITALIA
Tel. +39 06930251 • Fax +39 0693025240
info@dmg.it • www.dmg.it
93010172
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising