grp industrial housings and composite construction grp

grp industrial housings and composite construction grp
Tel: + 44 (01269) 832220
Moulded in Glass Reinforced Polyester (GRP) composite construction,
totally encapsulating a rigid core in accordance with the design criteria. GRP
laminate is comprised of fire retardant structural polyester resins reinforced
with chopped strand mat Glassfibre to form the composite panel.
Standard construction provides ‘U’ value 2.2 W/m2/0C Higher levels
of insulation can be offered to meet building regulations or specific
Standard core material is 12/18mm thick plywood, WBP or P5 V313 E1
Structural grade timber particle board. Other core materials can be used
to satisfy different structural/insulation requirements; design criteria and
specification. Large panel areas are suitably reinforced to maintain structural
Panel construction complies with BS 476 Part 20, half hour fire resistance
(Retention of stability, integrity and insulation). Fire retardant resin is used
to provide self extinguishing laminates to BS 476 Part 7 Class 2 (Surface
spread of flame). Other fire ratings can be provided.
Designed to comply with CP 3: Chapter 5 BS 6399 part 1,
2 ,3 Loadings for buildings ,wind loads , imposed roof loads and all other
relevant British Standards and Engineering design codes.
Standard fixing is through reinforced internal GRP flanges by self tapping
bolt system onto prepared bases. External flanges can be provided.
Fire Rating
Sound Attenuation
Standard composite core construction achieves noise attenuation of 17dBA
over octave band centre frequency range of 31.5Hz to 8KHz measured at
1.0m distance from wall. Other levels of attenuation up to 41dBA nominal
acoustic performance can be offered by use of different constructions.
Environmental Protection
Life expectancy is in excess of 30 years.
Dust, weather and splash-proof to a minimum of IP 54 protection rating.
Higher degrees of protection can be provided to IP 55 and IP65.
External: Satin finish – choice of any colour from the BS 4800 range. Applied
finishes to replicate traditional build materials are also available
A coloured isophthalic resin (Gelcoat) forms the external barrier giving an
excellent, durable weather and chemical resistant barrier in the harshest
of environments.
Standard internal finish is a white fire retardant resin. Other internal finishes
can be provided.
An extensive range of door sizes is available. Located in width or depth
walls, central or offset. Non standard door sizes incorporating removable
cills and transom are options.
Stainless steel hinges are fitted to all doors. Hinges are fitted with stainless
steel security fasteners in such a manner that they cannot be removed from
outside the kiosk.
Door Locking
Standard locking is by cylinder nightlatch lock or stainless steel (Grade 316)
Hasp and Staple. Alternatively: Locking to suit customer specification.
Additional security enhancements can be provided.
Adequate natural ventilation can be provided by means of integral vents,
fitted with bird and vermin screens. Forced ventilation to meet specific
requirements can be provided by suitable fans, complete with external
weatherproof GRP cowl. Heating, air-conditioning and de-humidification
can also be provided.
All electrical installations are in accordance with the IEE regulations current
editions, encompassing domestic to Zone 1 as required.
Several options are available, ranging from integral composite construction
floors to steel or GRP channel baseframes complete with steel plate or GRP
decking, stairways and rail guards.
All manufacture and customer service is controlled by an effective quality
assurance system, in line with the recommendations of the most recent
issue of ISO9001.
Health and safety, environmental and quality management systems
are independently audited under the Achilles UVDB verify category B2
Due to our policy of maintaining a continuous review of product performance, materials and construction, we reserve the right to amend the design and
dimensions of the products illustrated in our publication at any time without prior notice.
Registration No: 02767033 England & Wales Registered Office: Quinshield, Capel Hendre, SA18 3SJ
Tel: +44 (01269) 832220 Fax: (01269) 832221 E-mail: Website:
C/C DATA/1110
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF