Magnum Industrial`s
Best Value Guaranteed
THE NEXT GENERATION OF PERFORMANCE
Best Value Guaranteed
1 HP Continuous-Duty Dust Collector (MI-11100)
A
mobile dust collector with an
easy-to-clean 2 micron
filter bag, the MI-11100 can be
positioned close to machinery to
collect and filter extra-fine dust
at its source. It's the perfect
dust collector for professionals
and serious hobbyists working in
smaller shops.
750 C F M
ust
Mobile Dwith
C ollector
a rk
A nti-Sple
I mpel r
Features:
•
•
•
•
•
•
•
•
•
Extra-quiet anti-spark impeller reduces fire risk
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty 1 HP motor draws 7 Amps
Base- mounted motor design creates less vibration and requires fewer ductwork bends
High-quality double-stitched 2 micron extra-fine filter bag is washable for easy maintenance
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
1 HP, 110 V, 1 PH, 7 A
4” (102 mm)
750 CFM
10” (254 mm)
75 dBA
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
15” (381 mm)
20 gal. (90 L)
6.5” of water (without bag)
55 lbs (25 kg)
Best Value Guaranteed
1 HP Dust Collector (MI-11150)
T
he MI-11150 mobile dust
collector comes standard
with a 1 micron canister that
filters ultra-fine dust from particle
board, MDF, most plastics, as well
as cedar and other wood. It also
has built-in swivel-style casters,
so it can be positioned close to
your table saw or sander to collect
dust at the source. For smaller
shops with one or two pieces of
machinery, the MI-11150 provides
both efficient dust collection and
excellent filtration.
n
1 Micro
Canisterps
a
F ilter Tr ine
Ultra- F icles
t
Dust Par
Features:
• 1 Micron filter canister traps ultra-fine particles including dust from particle board,
MDF, cedar and other woods, and most plastics
• Canister filter with built-in lever shaker makes cleaning easy
• Impeller shaft designed with high-quality bearings for continuous duty
• Fully enclosed continuous-duty 1 HP motor draws 7 Amps
• Clear plastic bottom bag with quick-release straps makes keeping tabs on dust levels simple
• Built-in swivel-style casters deliver excellent mobility
• Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
1 HP, 110 V, 1 PH, 7 A
4” (102 mm)
550 CFM
10” (254 mm)
80 dBA
Filter Area:
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
20.33 sq-ft
15” (381 mm)
20 gal. (90 L)
6.5” of water (without bag)
67 lbs (30 kg)
Best Value Guaranteed
1.5 HP Dust Collector (MI-11200)
M
agnum Industrial’s
MI-11200 dust collector
delivers strong suction at a great
price. Its 1.5 HP motor pulls
1,280 CFM—and can provide
centralized dust collection for
a small or medium-sized shop.
Alternatively, with built-in
swivel-style casters, you can
position this dust collector near
your machinery to collect dust at
its source.
Delivers
FM
1,280 C
at a
Great
P ric e !
Features:
•
•
•
•
•
•
•
•
•
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty110/220 volt 1 HP motor draws 14/7 amps
Base-mounted motor design creates less vibration and requires fewer ductwork bends
High-quality double-stitched 2 micron filter bag traps extra-fine dust from particle board,
MDF cedar and other woods, and most plastics
Filter bag is washable for easy maintenance
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
1.5 HP, 110/220 V, 1 PH, 14/7 A
1 x 6” (152 mm) or 2 x 4” (102 mm)
1,280 CFM
13” (330 mm)
80 dBA
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
20” (508 mm)
42 gal. (190 L)
9” of water (without bag)
107 lbs (49 kg)
Best Value Guaranteed
1.5 HP Dust Collector w/Canister Filter (MI-11250)
F
eaturing a 1.5 HP motor
and 1 micron canister that
filters ultra-fine dust, Magnum
Industrial’s MI-11250 dust
collector can provide centralized
dust collection for a small shop.
Or take advantage of this
collector’s mobility: It has four
swivel-style casters and can be
positioned near your machinery to
collect dust at its source.
FM
1,280 lC
ctor
e
l
o
C
t
s
Du
- F i ne
a
r
t
l
U
h
t
wi
Canister
Filter
Features:
• Impeller shaft designed with high-quality bearings for continuous duty
• Fully enclosed continuous-duty 110/220 volt 1.5 HP motor draws 14/7 Amps
• 1 Micron filter canister traps ultra-fine particles including dust from particle board,
MDF, cedar and other woods, and most plastics
• Canister filter with built-in lever shaker makes cleaning easy
• Clear plastic bottom bag makes keeping tabs on dust levels simple
• Quick-release metal straps secure bags and allow quick bag changes
• Built-in swivel-style casters deliver excellent mobility
• Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
1.5 HP, 110/220 V, 1 PH, 14/7A
1 x 6” (152 mm) or 2 x 4” (102 mm)
1280 CFM
13” (330 mm)
80 dBA
Filter Area:
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
80 sq-ft
20” (508 mm)
42 gal. (190 L)
9” of water (without bag)
130 lbs (59 kg)
Best Value Guaranteed
2 HP Dust Collector (MI-11300)
W
ith a fully enclosed 2 HP
motor and double-plated
aluminum impeller,
the MI-11300 has the power
and durability to serve as a central
dust collector for a medium-sized
production shop.
FM
1,600 lC
ctor
e
l
o
C
t
s
Du
with
rk
A nti-Spla
I mpel er
Features:
•
•
•
•
•
•
•
•
•
•
•
One-piece anti-spark impeller reduces fire risk
Rugged double-plated aluminum impeller can handle larger chunks of wood
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty 220 volt 2 HP motor draws 9 Amps
Metal cowling connects blower to bag to increase efficiency and lower noise levels
High-quality double-stitched 2 micron filter bag traps extra-fine dust from particle board,
MDF, cedar and other woods, and most plastics
Filter bag is washable for easy maintenance
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
2 HP, 220 V, 1 PH, 9 A
1 x 6” (152 mm) or 2 x 4” (102 mm)
1,600 CFM
12 3/4” (323 mm)
80-90 dBA
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
Overall Dimensions:
(L x W x H)
20” (508 mm)
42 gal. (190.9 L)
12” of water (without bag)
132 lbs (60 kg)
39 3/8” x 31 1/2” x 74 3/4”
Best Value Guaranteed
2 HP Dust Collector w/Canister Filter (MI-11350)
F
eaturing an ultra-fine
1 micron canister filter and
a durable, efficient aluminum
anti-spark impeller, the MI-11350
is designed to keep your shop
clean and free of harmful dust.
With a fully enclosed 2 HP motor
and high-quality impeller shaft
bearings, this collector is tough
enough to provide a long service life
in a medium-sized production shop.
FM
1,600 lC
ctor
e
l
o
C
t
s
Du
- F i ne
a
r
t
l
U
h
t
wi
Canister
Filter
Features:
•
•
•
•
•
•
•
•
•
•
•
Extra-quiet anti-spark impeller reduces fire risk
Rugged double-plated aluminum impeller can handle larger chunks of wood
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty 220 volt 2 HP motor draws 9 amps
Metal cowling connects blower to bag to increase efficiency and lower noise levels
1 Micron filter canister traps ultra-fine particles
Built-in lever shaker for easy cleaning
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
Filter Area:
2 HP, 220 V, 1 PH, 9 A
1 x 6” (152 mm) or 2 x 4” (102 mm)
1,600 CFM
12 3/4” (323 mm)
80 dBA
80 sq-ft
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
Overall Dimensions:
(L x W x H)
20” (508 mm)
42 gal. (190 L)
12” of water (without bag)
141 lbs (64 kg)
39 3/8” x 31 1/2” x 74 3/4”
Best Value Guaranteed
3 HP Dust Collector (MI-11400)
D
elivering both power and
capacity, the MI-11400
features two filter bags,
two collection bags and an
aluminum anti-spark
impeller—driven by a fully enclosed
3 HP motor. This collector is
designed to provide central dust
collection for a medium-to-large
production shop.
FM
2,300 lC
lector
o
C
t
s
u
D
with
rk
A nti-Spla
I mpel er
Features:
•
•
•
•
•
•
•
•
•
•
•
One-piece anti-spark impeller reduces fire risk
Rugged double-plated aluminum impeller can handle larger chunks of wood
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty 220 volt 3 HP motor draws 12 Amps
Metal cowling connects blower to bag to increase efficiency and lower noise levels
High-quality double-stitched 2 micron filter bag traps extra-fine dust from particle board,
MDF, cedar and other woods, and most plastics
Filter bags are washable for easy maintenance
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
3 HP, 220 V, 1 PH, 12 A
1 x 6” (152 mm) or 3 x 4” (102 mm)
2,300 CFM
12” (305 mm)
80-95 dBA
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
Overall Dimensions:
(L x W x H)
20” (508 mm)
83 gal. (314 L)
16” of water (without bag)
165 lbs (75 kg)
60” x 32 5/8” x 76”
Best Value Guaranteed
3 HP Dust Collector w/Canister Filters (MI-11450)
T
he Magnum Industrial
MI-11450 offers the power
of a fully enclosed 3 HP motor and
the ultra-fine filtration capabilities
of twin 1 micron canisters.
It also has two storage bags,
and a durable aluminum anti-spark
impeller. It moves 2,300 CFM and
can handle larger chunks of wood.
This is the perfect dust collector
for medium-to-large shops
looking for suction power and
excellent filtration.
FM
2,300 CDust
Mobile with
C ollector
e
Ultra-F ienr
Canist
F ilters
Features:
•
•
•
•
•
•
•
•
•
•
•
Extra-quiet anti-spark impeller reduces fire risk
Rugged double-plated aluminum impeller can handle larger chunks of wood
Impeller shaft designed with high-quality bearings for continuous duty
Fully enclosed continuous-duty 220 volt 3 HP motor draws 12 Amps
Metal cowling connects blower to bag to increase efficiency and lower noise levels
1 Micron filter canister traps ultra-fine particles including dust from particle board,
MDF, cedar and other woods, and most plastics
Built-in lever shaker for easy cleaning
Clear plastic bottom bag makes keeping tabs on dust levels simple
Quick-release metal straps secure bags and allow quick bag changes
Built-in swivel-style casters deliver excellent mobility
Safety switch with key provides added security
Specifications:
Motor:
Inlet Diameter:
Airflow Capacity:
Impeller Diameter: Sound Level:
Filter Area:
3 HP, 220 V, 1 PH, 12 A
1 x 6” (152 mm) or 3 x 4” (102 mm)
2,300 CFM
12” (305 mm)
80-95 dBA
80 sq-ft
Bag Diameter:
Bag Capacity:
Static Pressure:
Weight:
Overall Dimensions:
(L x W x H)
20” (508 mm)
83 gal. (314 L)
16” of water (without bag)
222 lbs (101 kg)
61” x 21 5/8” x 74 3/4”
Best Value Guaranteed
Turbo Overhead Air Filter (MI-11700)
U
Features:
•
•
•
•
•
•
•
•
•
iet
u
Q
r
e
p
u
S
A ir
t
n
e
i
b
m
A
n
Filtratio
ltra-fine dust particles can
sometimes escape your dust
collection system or linger in the
air after you’ve used a portable
sander or power saw. These
airborne particles can contaminate
your spray finishing, or contribute
to long-term health problems. The
Magnum Industrial MI-11700
overhead air filter is an affordable
way to complement your dust
collector. It traps fine airborne
dust particles down to 1micron,
including allergens from cedar and
MDF dust, and cleans the ambient
air in your shop.
Remote control provides a 50’ range, three fan speeds and a snooze delay timer
“Simmer mode” delivers quiet ambient air filtration
High-volume performance cleans a 20’ x 20’ x 8’ shop up to 26 times every hour
Dual exhaust ports flow both left and right ensuring complete circulation
Induction motor is designed to run continuously if needed
Pre-filter traps dust particles as small as 5 microns
Inner filter traps dust particles as small as 1 micron
Heavy-duty steel cabinet includes steel hanging hooks
Low-profile design helps prevent accidental collisions in shops with low ceilings
Specifications:
Motor:
Air Volume (3 Speeds):
Filter Cycle (26/hr):
Outer Filter:
Inner Filter:
Timer Settings:
1/3 HP, 110 V, 1Ph, 2.8 A
700/900/1250 CFM
20’ x 20’ x 8’ (6 x 6 x 2.44 m)
5 Microns
1 Micron
Continuous, 2, 4, 6, 8 min
Sound Rating: 64 dB
Remote Control Distance:
50 ’ (15.25 m)
Unit Size:
30” x 24” x 14”
(762 mm x 609 mm x 355 mm)
Weight:86 lbs (39 kg)
Best Value Guaranteed
Compact Dry-Filter Spray Booth (MI-11900)
F
eaturing three quick-change
filters, a collapsible sanding
table and a 3 HP motor that moves
3,330 CFM of air, the Magnum
Industrial compact dry-filter spray
booth is a powerful and efficient
way to keep your workshop air free
of overspray and sanding dust.
It’s perfect for cabinet makers and
wood turners, or anyone who wants
to improve ventilation in their
educational facility, hobby shop
or workshop.
le
C ollapsib
Design
oor
l
F
s
e
v
a
S
Space
Features:
•
•
•
•
•
•
•
Triple filters trap contaminants and are easy to change
Improves room air quality by filtering overspray and dust
Controls spray from water-based paints, lacquer or sanding dust
12” aluminum anti-spark impeller reduces risk of fire
Powder-coated finish and high-quality construction
Rear outlet makes it easy to pipe exhaust outside
CSA approved
Specifications:
Motor:3 HP, 220V, 14.5A
CFM:3,300
Air Speeds:
3 m/s
Air Delivery:
99 m3
Working Area Size:
40” x 48” (1,016 mm x 1,219 mm)
Dimensions Opened:
51” x 70” x 94”
(1,295 mm x 1,778 mm x 2,387 mm)
Dimensions Closed:
32” x 71” x 94”
(812 mm x 1,803 mm x 2,387 mm)
Weight:
55 lbs (25kg)
Best Value Guaranteed
Bench-Top Belt Oscillating Spindle Sander (MI-16100)
T
he Magnum Industrial
MI-16100 bench-top
oscillating spindle sander is built
to handle any project. With a tilting
table, a powerful 1/2 HP motor
and a great selection of
precision-ground spindles, this
bench-top unit allows you to
accurately shape and sand wood,
metal and plastic. It’s perfect
for woodworking pros, serious
hobbyists and educational
facilities.
1/2 H Pus
C ontinuo
D ut y
Motor
Features:
• 1/2 HP cast-iron motor is totally enclosed to protect it from dust and debris
• Heavy-duty helical gear transmission is oil lubricated and enclosed for extremely
smooth reciprocal action and reduced heat
• Drive-train features ball bearings throughout for continuous duty and consistent performance
• Includes a range of tapered spindles from 1/4” to 2”, which are precision ground to minimize run-out
• Handy on-board storage for spare spindles adds convenience and efficiency to your work-flow
• Table tilts up to 45º to deliver precise sanding and shaping for a variety of applications
• Cast-iron dust hood fits up to 4” hose with adapter for efficient dust collection at the source
• Keyed safety switch provides added security
Specifications:
Motor:
Spindle RPM:
Oscillations/min:
Oscillation Length:
Spindle Sizes:
Table Size:
1/2 HP, 110 V, 7.5 A
1,720
29
15/16” (24 mm)
1/4” to 2”
14 1/2” x 14 1/2”
(368 mm x 368 mm)
Table Tilt: Table Height:
Dust Outlet:
Base Dimensions: Weight:
0o to 45o
18 5/16” x 14 1/2”
(465 mm x 368 mm)
2” (51 mm) with 4” adapter
14 1/2” x 14 1/2”
(368 mm x 368 mm)
81 lbs (37 kg)
Best Value Guaranteed
Oscillating Spindle Sander (MI-16150)
D
esigned to meet the needs
of light- to medium-duty
production shops and educational
facilities, the Magnum Industrial
Oscillating Spindle Sander is an
all-around sander that can handle
a variety of materials. Whether
you’re working with wood, metal or
plastic, this sander delivers both
performance and durability for a
range of projects, large and small.
1 HP
us
C ontinuo
D ut y
Motor
Features:
Delivers 75 oscillations per minute and a full 1 1/2” stroke
Precision cast table tilts from 0 to 45o
Includes 10 spindles (1/4” to 4”), precision taper ground to minimize spindle runout
Heavy-duty helical geared transmission is enclosed in an oil bath gearbox and delivers smooth
reciprocal action and stays cool during heavy use
• 1 HP continuous-duty motor is fully enclosed for protection from dirt, dust and debris
• Includes cast-iron dust hood and three interchangeable metal inserts for
precision sanding of small pieces
• Safety switch
•
•
•
•
Specifications:
Motor:
Spindle Speed:
Spindles:
Oscillation Length:
Oscillation Speed: 1 HP, 110/220 V, 1 PH, 10.5 A
1,725 R PM
10 (1/4” to 4”)
1.5” (36 mm)
75 Oscillations Per Minute
Table Size:
Table Tilt Angle:
Table Height:
Dust Outlet:
Base Dimensions:
Weight:
24 1/4” x 241 1/4” (616 x 6161 mm)
0° to 45°
39” (990 mm)
4” (102 mm)
117.5” x 17.5” (445 x 445 mm)
319 lbs (145 kg)
Best Value Guaranteed
2” x 42” Belt and 8” Disc Sander (MI-16210)
B
1” & 2”
Belt
Option
Features:
uilt with sealed ball bearings
and no bushings, the Magnum
Industrial MI-16210
2” x 42” Belt and 8” Disc Sander
features a double-insulated
direct-drive motor for continuous
use applications. Whether you need
to finish a wood project with some
detailed sanding or sharpen tools
or knives around the shop,
the MI-16210 is up for the task.
It’s a handy and affordable addition
to any workshop and will sand
wood, metal or plastic.
• Direct-drive double-insulated motor with sealed bearings creates less vibration and
accommodates continuous applications
• Compatible with 1” x 42” belts, 2” x 42” belts and 8” discs
• Improved belt tracking mechanism provides controlled, accurate sanding
• Quick-release belt tensioner makes changing belts easy
• Tables tilt and lock (0° - 45°) for accurate sanding on an angle
• Separate dust boot for disc and belt provide efficient dust control at the source
• Switch features removable lock-out tab for added safety
• Includes mitre gauge and 1” and 2” belt platens
Specifications:
Motor:
Belt Size:
Belt Speed:
Disc Size:
Disc Speed:
1/2 HP, 120 V, 6.2 A
2” x 42” or 1” x 42”
(50 mm or 25 mm x 1066 mm)
3,100 LFM
8” (203 mm)
3,450 RPM
Belt Table Size:
Belt Table Tilt:
Disc Table Size:
Disc Table Tilt: Weight:
10” x 6” (254 x 152 mm)
0 - 450
10 3/4” x 7 1/2” (273 x 190 mm)
0 - 450
61.86 lbs (28.05 kg)
Best Value Guaranteed
Heavy-Duty Belt and Disc Sander (MI-16300)
M
agnum Industrial’s heaviest
belt and disc sander, the
MI-16300 delivers 1,800 RPM
and tons of torque—perfect
for wood and metal sanding
applications in professional
production shops and schools.
Sands
Metal &
Wood
Features:
•
•
•
•
•
•
•
•
•
•
Direct-drive 1 1/2 HP motor delivers loads of power and minimal vibration
Safety features include a steel disc shield and overload warning lights
4” Dust collection port with separate dust boot for disc and belt allows efficient dust control
Cast-iron backing disc provide durability and precision
Super thick cast-iron tables deliver long service life
Upgraded belt-tracking mechanism
Belt tilts and locks at any angle for versatility and user comfort
Totally enclosed stand stabilizes sander and allows extra storage
Quick-release belt tensioner makes belt changes easy
Keyed safety switch for added security
Specifications:
Motor:
Belt Size:
Disc Diameter:
Belt Speed:
Disc Speed:
Belt Table Tilt:
1 1/2 HP, 110/220 V, 1 PH, 13/6.5 A
6” x 48” (152 mm x 1219 mm)
12” (304 mm)
2,300 LFM
1,800 RPM
0o and 45o
Disc Table Tilt: Belt Position:
Disc Backing Plate:
Base Dimensions:
Dust Ports:
Weight:
45o outside
Multi-angle
Cast Iron
15 3/4” x 22” (400 mm x 558 mm)
1 x 5” (127 mm)
370 lbs (167 kg)
Best Value Guaranteed
6”x89” Edge Sander with Tilting Head (MI-16400)
D
esigned for production shops,
serious hobbyists and school
workshops, the Magnum Industrial
MI-16400 edge sander with
tilting head is versatile, precise,
durable and easy to use.
It’s ideal for working with a range
of materials including wood, metal
and plastic
&
e
l
i
t
a
s
r
e
V
e
Accurat
Tilting
Head
Features:
•
•
•
•
•
•
•
•
1 1/2 HP cast-iron motor is fully enclosed to keep out dust and debris
Head tilts horizontally and vertically and can be locked at any angle
Precision steel plate is polished and coated in graphite
Includes lockable cast-iron mitre gauge
Quick-release belt tensioner for easy adjustments and belt changes
Includes steel end table that’s more durable than wood end tables
Stand features vibration-absorbing pads to provide stable, smooth operation
Keyed safety switch provides added security
Specifications:
Motor:
Belt Size:
Belt Speed:
Front Table Size:
Aux. Table Size: 1/2 HP, 110 /220 V, 18/9 A
6” x 89” (152 mm x 2,260 mm)
3,900 LFM
9 7/8” x 29 5/8” (250 mm x 751 mm)
9 7/8” x 11 7/8” (250 mm x 300 mm)
Dust Outlet:
4” (102 mm)
Overall Dimensions: 50” x 21” x 49”
(1,270 mm x 533 mm x 1,245 mm)
Weight:
275 lbs (123 kg)
Best Value Guaranteed
6” x 108” Edge Sander (MI-16500)
T
he Magnum Industrial
MI-16500 6” x 108” edge
sander is versatile and accurate.
It’s loaded with features including
balanced 7” drums, an adjustable
table and a powerful 2 HP motor.
This commercial-duty edge sander
is designed to perform an array of
sanding applications and handle
the demands of any workshop
environment.
Versatileial
c
C ommerdge
D ut y E r
Sande
Features:
•
•
•
•
•
•
•
•
2 HP cast-iron motor is fully enclosed to keep out dust and debris
Table tilts, raises and lowers to access the entire surface of the sanding belt
7” diameter drums are balanced for easy tracking
Precision steel plate is polished and coated in graphite
Hinged dust hood accommodates extra-long pieces
End table for sanding curves
Enclosed steel stand provides stable platform
Includes magnetic safety switch
Specifications:
Motor:
Belt Size:
Belt Speed:
Main Table Size:
Aux. Table Size: 2 HP, 220 V, 1 Phase, 14 A
6” x 108” (152 mm x 2,743 mm)
3,150 LFM
7 3/4” x 37” (152 mm x 2,743 mm)
11 3/4” x 19” (299 mm x 483 mm)
Dust Outlet:
Overall Dimensions: Footprint:
Weight:
4” (102 mm)
62” x 20 1/2” x 41”
(1,575 mm x 521 mm x 1,041 mm)
42” x 16 1/2” (1,067 mm x 419 mm)
462 lbs (210 kg)
Best Value Guaranteed
24” Double Drum Sander (MI-16750)
T
he Magnum Industrial
MI-16750 24” double drum
sander sands two grits on one
pass, so you can achieve a fine
finish in less time. With a
heavy-duty base and steel frame,
this sander is made to perform in
medium-to light-duty* production
shops and is ideal for
hardwood applications.
*may not be suitable for long, heavy planks
Variable
Speed
Double
Sanding
Durms
Features:
•
•
•
•
•
•
•
•
•
3 HP main motor and 1/6 HP drive motor
Double drums sand with rough and fine grit paper in a single pass
Variable speed and a durable rubber feed mat provide control and prevent slippage
Spring-supported rollers eliminate chatter
Quick-change spring clips secure abrasive to drums
Fully enclosed heavy-duty stand adds extra support
Hinged metal cover allows easy maintenance
Twin 4” dust ports allows efficient dust collection
Magnetic safety switch improves operator safety
Specifications:
Motor:
Conveyor Motor:
Max Sanding Width:
Sanding Thickness:
Min. Sanding Length:
Drum Diameter: 3 HP, 220 V, 1 Phase, 15 A
1/6 HP
24” (610 mm)
1/4” to 5” (6mm to 127mm)
5” (127 mm)
5” (127 mm)
Drum Speed: Feed Speed: (variable) Dust Outlet:
Base Dimensions:
Weight:
1,150 RPM
3 to 20 FPM (.93 to 6.2 m/min)
4” (102 mm)
42 1/2” x 16 1/2” (1,080 mm x 419 mm)
515 lbs (234 kg)
Best Value Guaranteed
13” Helical Head Planer (MI-31160)
W
ith long-lasting carbide
blades and a precise helical
cutterhead, the versatile
MI-31160 Helical Head Planer
excels in short-run applications,
with either hard or soft wood.
Its redesigned tables fold up for
easy storage, and feature four
support posts to minimize snipe.
This portable planer is ideal
for small shops and jobsite
applications where high-quality
finish is critical.
Helical
th
Head wie
Carbid
I nserts
Features:
•
•
•
•
•
•
•
•
Powerful 15 Amp motor and helical cutterhead deliver smooth, consistent results
Durable four-post table ensures stable feeding and minimizes snipe
Double-sided carbide inserts provide long service life and allow for easy set up
Helical cutterhead reduces noise levels and tear out on hard wood cross grain
Sturdy retractable tables fold away for storage and transport
Dust hood provides efficient dust control when connected to shop-vac or dust collector
Depth of cut indicator allows improved accuracy
Keyed on/off switch provides additional safety
Specifications:
Motor:
Carbide inserts:
Cutterhead Speed:
Max Planing Width:
Planer Opening:
Minimum Thickness: 110 V, 15 A
26
10,000 RPM
13” (330 mm)
6” (152 mm)
1/8” (3 mm)
Minimum Stock Length: 5” (127 mm)
Maximum Cutting Depth:1/16” (1.5 mm)
Feed Speed:
26 LMF
Table w/extensions:
33 3/4” x 13” (857 x 330 mm)
Weight:
79 lbs (35.8 kg)
Best Value Guaranteed
15” Helical Head Planer (MI-31250)
T
he Magnum Industrial
MI-31250 15” helical head
planer is considered one of the
industry’s finest. High-speed
bearings, hardened steel gears
and a cast iron motor ensure that
this planer can deliver in demanding
professional applications.
Its double-sided rectangular
carbide inserts make quick work
of hardwoods like cross-grain
maple and teak and are also quick
to set, eliminating the need for
time-consuming and finicky
knife-setting jigs.
Helical
th
Head wie
Carbid
I nserts
Features:
• 3 HP heavy-duty cast-iron motor is mounted on the bottom to
provide better stability
• Helical cutterhead with carbide inserts delivers smooth, accurate
cuts—an upgrade over conventional heads or systems with square inserts
• Rugged one-piece stand stabilizes planer and reduces vibration
• Four-post lock minimizes snipe marks on final pass
• Top-mounted return rollers enable multiple passes on long pieces of stock
• Built-in casters with locks allow for easy mobility and repositioning
• Magnetic safety switch adds safety and protects motor from overloading
Specifications:
Motor:
Carbide inserts:
Cutterhead Speed:
Cutterhead Diameter:
Max Planing Width:
Planer Opening:
3 HP, 230 V, 1 PH, 15 A
42
5,000 RPM
2 7/8” (50.8 mm)
15” (380 mm)
6” (152 mm)
Minimum Thickness: 3/8” (9.5 mm)
Minimum Stock Length: 6 1/2” (1.98 mm)
Maximum Cutting Depth:1/8” (3.175 mm)
Feed Speed:
16 LMF & 20 LMF (4.87 & 6.1 M/min)
Dust Ports:
1 x 5” (127 mm)
Weight:
598 lbs (271 kg)
Best Value Guaranteed
20” Heavy-Duty Planer (MI-31450)
T
he Magnum Industrial
MI-31450 20” heavy-duty
planer is an industry workhorse,
made for busy shops that need
a mid range production machine.
The newly designed Magnum
helical cutterhead delivers all the
advantages of a standard helical
head with several improvements:
It limits lines and grain tear out;
it doesn’t require special torque
setting tools; and its 58 reversible
carbide inserts can handle almost
any hardwood or softwood
application.
Helical
th
Head wie
Carbid
I nserts
Features:
Powerful 5 HP motor accommodates continuous feeding, even with larger planks
Magnum helical cutterhead with 58 two-sided carbide inserts minimizes tear out and lines
Extra-long cast-iron wings support large workpieces and reduce snipe
Top return rollers facilitate multiple passes on long pieces
Four-post lock minimizes snipe marks on final pass
Two feed speeds (16 and 20 LFM) deliver high-quality results on hardwood or softwood
Complete one-piece stand provides stable, vibration-free operation
and includes a built-in heavy-duty mobile base
• Magnetic switch protects against burnout and improves operator safety
•
•
•
•
•
•
•
Specifications:
Main Motor:
Inserts:
Extension Wing Size:
Table Size:
Max Planing Width:
Cutterhead Speed:
5 HP, 220 V, 1 PH, 23.2 A
58 carbide two-sided inserts
15” x 21 1/4” (380 x 538 mm)
55” x 20” (1437 x 508 mm)
20” (508 mm)
5,000 RPM
Maximum Thickness: 8” (202 mm)
Minimum Stock Length: 6 3/4” (172 mm)
Maximum Cutting Depth:1/8” (3 mm)
Feed Speed:
16 & 20 LFM
Dust Ports:
5” (127 mm)
Weight:
893 lbs (406 kg)
Best Value Guaranteed
24” Heavy-Duty Helical Head Planer (MI-31753)
T
he Magnum Industrial
MI-31753 24” heavy-duty
helical head planer incorporates
all the features you need for
any planing application. With its
variable high speed feed
(up to 72 LFM) and 15 HP
heavy-duty motor it is best suited
for schools, cabinet shops and
furniture shops that need the
performance and dependability of a
heavy-duty industrial-grade planer.
Helical
th
Head wie
Carbid
I nserts
Features:
•
•
•
•
•
•
•
•
Helical head reduces tear out while producing very low noise levels
PLC controlled table allows you to fine tune positioning
Sectional in-feed rollers reduce kickback when stagger feeding material
Variable high-speed feed up to 72 LFM, allows for high-volume production
Full 15 HP heavy-duty motor delivers power and reliability
Magnetic safety switch protects motor from overload and increases user safety
Quick lever sets both table rollers to adjust for snipe-free planing of both hardwood and softwood
One-piece cast frame reduces vibration
Specifications:
Main Motor:
Table Motor:
Feed Motor:
Table Size:
Max Planing Width:
Cutterhead Speed:
15 HP, 220 V, 3 PH, 40 A
1/2 HP, 2 A / M3: 0.9A
2 HP, 6.8 A / M3: 2.5A
35.5” x 25 1/4” (901 x 641mm)
24” (609 mm)
5,000 RPM
Minimum Thickness: 11 3/4” (298 mm)
Minimum Stock Length: 10 5/16” (268 mm)
Maximum Cutting Depth:1/8” (3.175 mm)
Feed Speed:
16.5 to 72 LFM
Dust Ports:
2 x 5” (127 mm)
Weight:
2,550 lbs (1,156 kg)
Best Value Guaranteed
Deluxe Router Lift & Table Package (MI-42150)
Fence Safety
Hold-downs
(Included)
Micro Fence
(Included)
Chain Drive Award
Winning Router Lift
(Included)
Table Safety
Hold-downs
(Included)
Cast Iron Table
(Included)
Moveable Safety Switch
(Included)
Dust Box
(Included)
Retractable
Mobile Base
(Included)
T
his package allows you to
perform precision router and
shaping projects where fine joinery
and detail is critical. Repetitive
accuracy is easy with this system.
The chain lift design is robust
enough to take commercial duty
applications and the vertical
design eliminates bushings
therefore minimizes maintenance
and ensures long term accuracy.
Combined with a solid cast iron
table top and fine adjust fence
system this package
is a top seller.
Award
W i n n i ng
Router
Features:
L i ft
• Above table fine adjustment gives clear view of increments for precision work
Router Lift Available Separately
(MI-42100)
•
•
•
•
•
•
•
•
Chain lift design eliminates bushings and ensure maintenance free longevity
Cast iron precision ground table top for solid stable performance
Built in dust kit makes dust control efficient and easy to connect
All safety feather boards are included ensuring safe and vibration free work
All adapters are included to allow most fixed base routers to be used
Retractable mobile base can be lowered on 4 solid feet for vibration free work
Dust collection connects the main router and the fence port to ensure full coverage
On/off switch is movable to different positions for safer easy access
Specifications:
Overall Dimensions: 35 1/2” x 24” x 41” (902 x 609 x 1041mm)
Table Size:
24” x 32” x 1 1/4” (609 x 812 x 32 mm)
Table Height:
36 1/2” (927 mm)
Fence Size (each):
3” x 17 3/4” x 3/4” (76 x 451 x 19 mm)
Max Fence Travel:
9” (229 mm)
Dust Outlet:
4” (102mm)
Dist. Bet ween T-Slot & Spindle Center:
3/4”:5 5/8” (143 mm) / 3/8”: 7 3/16” (183 mm)
Dist. Bet ween Spindle Center
to Front Edge of Table:
12” (305 mm)
T-Slot Dimensions:
3/4” x 3/8” (19 x 10 mm)
3/8” x 1/4” (10 x 7 mm)
Router Insert Plate:
9 1/4” x 11 3/4” (235 x 298 mm)
Table Opening Sizes:
3 3/4” (95 mm) plate
1 1/2” (38 mm) insert ring
Weight:
185 lbs (84 kg)
Best Value Guaranteed
10” Cabinet Saw (MI-51100)
A
true left-tilt cabinet saw with
base-mounted trunnions for
vibration-free operation and easy
fine-tuning, the Magnum Industrial
MI-51100 10” cabinet saw
features a self-aligning T-fence
and a powerful 2 HP motor that
operates on either 220 or 110
Volt. This saw is ideal for both
professional cabinet shops and
serious hobbyists.
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 HP cast-iron motor is fully enclosed to keep out dust and debris
Precision self-aligning T-square fence reduces binding
Quick-change fence faces save time and improve efficiency
L-12 version on fence allows 12” to left of blade capacity
Removable riving knife prevents kickback
Forged one-piece arbor guarantees minimal saw run-out
See-thru guard with anti-kickback features
Knee-knock safety switch allows quick stops
Blade lock for safe blade changing
Upgraded dust collection design is super efficient
Extra-large table insert makes for easy blade changes
Large T-slot mitre gauge slots
Serpentine joint-less drive belt delivers super-smooth operation
Hanging brackets provide blade and wrench storage
Forged e
One- Pierc
Arbo
Optional: MI-99510
Zero Clearance Insert available
Specifications:
Motor:
2 HP, 115 V/230V, 19/9.5 A
Blade Diameter:
10” (254 mm)
Arbor Diameter:
5/8” (16 mm)
Arbor Speed:
4,000 RPM
o
Max. Cutting Depth at 45 :
2 1/4” (54 mm)
o
Max. Cutting Depth at 90 :
3” (77 mm)
Max. Rip to Left of Blade: 8” (203 mm)
Max. Rip to Right of Blade:
30” (762 mm)
Max. Dado Cut:
3/16” (21 mm)
Dust Port Diameter:
4” (102 mm)
Table Height:
36” (914 mm)
Table Size:
44” x 27” (1,118 mm x 686 mm)
Base Dimensions:
20” x 20” (508 mm x 508 mm)
Weight:330 lbs (150 kg)
Best Value Guaranteed
10” Cabinet Saw with 3 HP Motor (MI-51250)
T
us
C ontinuo P
Duty 3H
Motor
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
his 3 HP 10” left-tilt cabinet
saw is ideal for light- to
medium-duty shops, especially
those that require a full 50” rip
capacity. In addition to its powerful
3 HP motor, this saw also features
a self-aligning precision T-fence
and an internal dust collection
port near the blade, which adds to
the efficiency and effectiveness
of your dust collection system.
Further improve safety and dust
control with the optional Magnum
Industrial overarm blade cover
(MI-52100) shown below.
3 HP cast-iron motor is fully enclosed to keep out dust and debris
Precision self-aligning T-square fence with 50” rip capacity
Quick-change fence faces save time and improve efficiency
L-12 version on fence allows 12” to left of blade capacity
Removable riving knife prevents kickback
Forged one-piece arbor guarantees minimal saw runout
See-thru guard with anti-kickback features
Magnetic safety switch
Blade lock for safe, easy blade changing
Upgraded dust collection design is super efficient
Extra-large table insert makes for easy blade changes
Large T-slot mitre gauge slots
Serpentine jointless drive belt delivers super-smooth operation
Hanging brackets provide blade and wrench storage
Includes laminated per-drilled table boards and adjustable steel legs
Specifications:
Motor:
Blade Diameter:
Arbor Diameter:
Arbor Speed:
Arbor Tilt:
MCD 45°:
MCD 90°:
3 HP, 230 V, 13 A
10” (254 mm)
5/8” (16 mm)
4,000 RPM
0° to 45°
2 1/8” (54 mm)
3” (77 mm)
MCD = Maximum Cutting Depth
Optional: MI-99510
Zero Clearance Insert Also Available
Maximum Rip to Left of Blade:
12” (305 mm)
Maximum Rip to Right of Blade:
50” (1270 mm)
Maximum Dado Cut:
13/16” (21 mm)
Dust Port Diameter:
4” (102 mm)
Table Height:
36 3/4” (914 mm)
Table Size:
44” x 27” (1,118 x 686 mm)
Base Dimensions:
23” x 22 1/2” (584 x 572 mm)
Weight:371 lbs (168 kg)
Best Value Guaranteed
10” Heavy-Duty Cabinet Saw
with 3 HP Motor (MI-51350)
T
Magnums
l
I ndustriat
Toughes
Saw
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
he Magnum Industrial
MI-51350 heavy-duty cabinet
saw is as tough as it is accurate,
delivering precision for detailed
joinery and power for heavy ripping.
This saw is equipped with a
multi-feature fence and an internal
dust collection port near the blade
for efficient and effective dust
collection. Further improve safety
and dust control with the optional
Magnum Industrial overarm blade
cover (MI-52100) shown below.
3 HP cast-iron motor is fully enclosed to keep out dust and debris
Extra-large precision-ground cast-iron table
Self-aligning fence is loaded with features
L-12 version on fence allows 12” to left of blade capacity
Removable riving knife prevents kickback
Forged one-piece arbor guarantees minimal saw runout
Magnetic safety switch
Blade lock for safe, easy blade changing
Extra-large table insert makes for easy blade changes
Large T-slot mitre gauge slots
Serpentine jointless drive belt delivers super-smooth operation
Hanging brackets provide blade and wrench storage
Includes laminated per-drilled table boards and adjustable steel legs
Specifications:
Motor:
Optional Motor:
Blade Diameter:
Arbor Diameter:
Arbor Speed:
Arbor Tilt
MCD 45°:
MCD 90°:
3 HP, 230 V, 1 Phase,11.7 A
5 HP, 220 V, 3 Phase, 4 A
10” (254 mm)
5/8” (16 mm)
4,300 RPM
0° to 45°
2 1/8” (54 mm)
3” (77 mm)
MCD = Maximum Cutting Depth
Optional: MI-99511
Zero Clearance Insert Also Available
Maximum Rip to Left of Blade:
12” (305 mm)
Maximum Rip to Right of Blade: 50” (1270 mm)
Maximum Dado Cut:
13/16” (21 mm)
Dust Port Diameter:
4” (102 mm)
Table Height:
34” (863 mm)
Table Size:
42” x 29” (1,066 mm x 736 mm)
Base Dimensions:
21” x 23” (533 mm x 584 mm)
Weight:540 lbs (245 kg)
Best Value Guaranteed
Magnum Industrial 10” Overarm
Blade Cover (MI-52100)
N
eed to improve on your existing
table saw cover? The Magnum
Industrial 10” overarm blade
cover is the perfect solution. Its
telescoping boom design fits most
table saws easily, and the cover
is compatible with saws equipped
with riving knives. Plus it connects
to your dust collection system for
efficient dust collection
at the source.
Features:
• Fits most saws with very little modification, and most importantly,
works with saws that have anti-kickback riving knives installed
• Replaceable Plexiglas plates allow great visibility and provide excellent protection
• Swings in and out to allow quick access to table insert and blade arbor
• Connects to your dust control system to efficiently remove sawdust and debris at the source
Specifications:
Boom Diameter:
4” (102 mm)
Range of Boom: 39 3/4” - 69 5/8” (1,010–1,770 mm)
Boom Height: (above table)
13 3/8” (340 mm)
Boom Height: (above floor) 33 3/4” - 33 3/4” (860–1,230 mm)
Blade Cover Dimensions:
3 1/8” x 17” (80 x 432 mm)
Weight:58 lbs (26.5 kg)
Best Value Guaranteed
Heavy-Duty 16” Radial Arm Saw (MI-53400)
D
Features:
•
•
•
•
•
•
•
•
•
D ut y
Heavy-d
d
& Loa eety
with Sarfes
Featu
esigned for continuous-duty
production shops, the Magnum
Industrial MI-53400 Heavy-Duty
16” Radial Arm Saw features
impressively sturdy castings
and a rugged overall construction.
It also comes with a variety of
safety features including a blade
brake, safety guard, riving knife,
mag switch and motor return.
The MI-53400 delivers accurate
results in many applications—
crosscuts, rips, mitre cuts,
bevel cuts and more—and fine
adjustments are easy to make.
Delivers precise results when cutting standard crosscuts and rips, as well as bevel and mitre cuts
Heavy-duty cast-iron frame and all-steel column and stand allow for stable and accurate cutting
Adjustable index features positive stops at 90° and 45°
Automatic blade brake quickly stops blade after shutdown
European-designed blade guard meets the highest safety standards
Motor return spring safely and automatically repositions motor after cutting
Built-in dust collection ports helps control debris and chips at the source
Anti-kickback riving knife prevents overfeeding and jamming
Magnetic safety switch with lock-out key provides added safety
Specifications:
Motor:3 HP, 220 V, single phase
4 HP, 220 V, three phase
Blade Diameter: 16” (400 mm)
Blade Arbor: 1” (25 mm)
Crosscut Capacity: 24” (609 mm)
Maximum Cutting Depth at 90°: 4 7/8” (124 mm)
Maximum Cutting Depth at 45°: 2 1/2” (65 mm)
Dado Capacity: Table Height: Table Dimensions: Overall Dimensions: Shipping Weight: Net Weight: 1” (25 mm)
32” (813 mm)
39 3/4” x 48” (1,010 x 1,220 mm)
56 5/8” x 48” x 67 7/16”
(1,439 x 1,220 x 1,713 mm)
799 lbs (363 kg)
572 lbs (260 kg)
Best Value Guaranteed
14” Bench Drill Press (MI-76100)
I
ntroducing the Magnum
Industrial 14” bench-top drill
press, a rugged, powerful and
accurate tool that can handle a
variety of wood and metal drilling
applications. Ideal for a hobbyist
or a professional who occasionally
requires a drill press, the
MI-76100 bench-top drill press
has a ton of features and is
constructed to our specs
to deliver long life and
accurate drilling.
ight
L aser Lr
l
and D ila
u rd
C h u ck G
I ncluded
Features:
•
•
•
•
•
•
•
•
5/8” Precision chuck and taper for accurate vibration-free drilling
Built-in work light with separate switch
Extra-long, 1/2” diameter handles provide better feed control
Durable metal hood protects motor from dust and debris
Positive drill stop for pre-measured drill depth does not slip
Speeds from 280-3,000 RPM for metal/wood or plastic drilling application
Cast iron pulleys limit vibration during operation
Precision bearing for accurate drilling and long life
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size:
Column Diameter:
1/2 HP, 110 V, 8 A
5/8” (16 mm)
5/8” (16 mm)
3 1/8” (80 mm)
11 3/8” (289 mm)
2 7/8” (73 mm)
Spindle Speeds:
Spindle / Chuck Taper:
Overall Height:
Base Size:
Swing:
Weight:
(12) 280-3,000 RPM
MT2 / JT3
38 1/2” (978 mm)
10” x 16 7/8” (254 x 429 mm)
13 3/8” (340 mm)
105 lbs (48 kg)
Best Value Guaranteed
14” Floor Drill Press (MI-76150)
I
ntroducing the Magnum Industrial
14” drill press, a rugged, powerful
and accurate tool that can handle
a variety of wood and metal drilling
applications. Ideal for a hobbyist
or a professional who occasionally
requires a drill press,
the MI-76150 drill press has a
ton of features and is constructed
to our specs to deliver long life and
accurate drilling.
ight
L aser Lr
l
and D ila
u rd
C h u ck G
I ncluded
Features:
•
•
•
•
•
•
•
•
5/8” Precision chuck and taper for accurate vibration-free drilling
Built-in work light with separate switch
Extra-long, 1/2” diameter handles provide better feed control
Durable metal hood protects motor from dust and debris
Positive drill stop for pre-measured drill depth does not slip
Speeds from 280-3,000 RPM for metal/wood or plastic drilling application
Cast iron pulleys limit vibration during operation
Precision bearings for accurate drilling and long life
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size:
Column Diameter:
1/2 HP, 110 V, 8 A
5/8” (16 mm)
5/8” (16 mm)
3 1/8” (80 mm)
11 3/8” (289 mm)
2 7/8” (73 mm)
Spindle Speeds:
Spindle / Chuck Taper:
Overall Height:
Base Size:
Swing:
Weight:
(12) 280-3,000 RPM
MT2 / JT3
62” (1575 mm)
10” x 16 7/8” (254 x 429 mm)
13 3/8” (340 mm)
125 lbs (56 kg)
Best Value Guaranteed
17” Floor Drill Press (MI-76350)
T
he Magnum Industrial 17” drill
press delivers precision and
power and it’s built to handle the
demands of a professional shop.
The MI-76350 is a great option
for fabricators looking for a drill
press that’s rugged enough to
handle the demands of light and
medium duty production work and
accurate enough to consistently
deliver precise results.
ight
L aser Lr
l
and D ila
u rd
C h u ck G
I ncluded
Features:
•
•
•
•
•
•
Industrial 3/4 HP motor with a durable metal hood to keep out dust and debris
Double-wide spindle bearings and precision spindle reduce vibration during operation
Built-in work light with separate on/off switch
Extra long handles for better feed control
Positive drill stop for accurate depth control
Full range of spindle speeds
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size:
Column Diameter:
3/4” HP, 110 V, 12 A
3/4” (19 mm)
5/8” (16 mm)
3 1/8” (80 mm)
12” (305 mm)
3 1/8” (79 mm)
Spindle Speeds:
(12) 280-3,000 RPM
Spindle / Chuck Taper:
MT2 / JT3
Overall Height:
64 1/2” (1638 mm)
Base Size:
11 3/4” x 19 5/8” (302 x 500 mm)
Swing:
17” (432 mm)
Weight:
200 lbs ( 90 kg)
Best Value Guaranteed
17” Heavy-Duty Drill Press (MI-76370)
W
ith a 6” stroke, upgraded
laser and a precision-made
spindle and bearings, the Magnum
Industrial 17” heavy-duty drill
press delivers pinpoint,
vibration-free drilling and can
withstand the daily grind of busy
production shops and garages.
Features:
•
•
•
•
•
•
•
•
•
•
•
Cast-iron 1 HP motor is fully enclosed
Includes upgraded laser and adjustable inspection light
3/4” precision chuck for accurate, small-diameter drilling
Cast iron pulleys reduce vibration
Built-in work light with separate on/off switch
Extra-long, 1/2” diameter handles for better feed control
Durable metal hood protects motor from dust and debris
Positive non-slip drill stop improves depth control
Full range of spindle speeds, from 340 to 2,800 RPM
Precision bearings for accurate drilling and long life
Ideal for drilling wood and metal
Extra
Long 6”
Stroke
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size (Diameter):
Column Diameter:
1 HP, 110 / 220 V, 12.5 / 6.25 A
1” (21 mm)
3/4” (19 mm)
6” (152 mm)
14” x 14” (355 mm x 355 mm)
3 1/8” (79 mm)
Spindle Speeds:
(12) 255 to 2,750 RPM
Spindle / Chuck Taper:
MT3 / JT3
Overall Height:
68” (1,730 mm)
Base Size:
11 3/4” x 19 5/8” (302 mm x 500 mm)
Swing:
16 15/16’’ (340 mm)
Weight:
230 lbs (104 kg)
Best Value Guaranteed
17” Electronic Variable Speed Drill Press (MI-76390)
I
ntroducing the MI-76390, a drill press that
combines production-grade quality and precision
with the versatility of electronic variable speed.
Along with electronic variable speed, the
MI-76390 features the same rugged, heavy-duty
components and extensive safety features you
expect from Magnum Industrial.
E
lectronic variable speed means you don’t need
to change belts to switch speeds. Simply select
the right speed for your application and start
drilling. The MI-76390 features a digital inverter
that maintains full torque at every speed, so it’s an
efficient and accurate solution for drilling a variety
of materials including wood, plastic, ceramic and
metal—even hard metal, like stainless steel.
Features:
•
•
•
•
•
•
•
•
•
•
•
•
ic
Electron
Variable
Speed!
Electronic variable speed delivers full torque at any speed
Cast-iron 1 HP motor is fully enclosed
5/8” drill chuck offers 3/4 hole capacity steel and 1 1/4” in wood
Extended table crank handle makes height adjustments smooth and easy
Extra-long handles deliver top-notch feed control
Rugged drill table includes built-in vise slots
Positive non-slip drill stop improves depth control and doesn’t slip
Full range of spindle speeds, from 250 to 3,200 RPM, to drill wood, metal, plastic, ceramic and more
Cast-iron pulleys reduce vibration
Precision bearings for accurate drilling and long life
Heavy-duty cast base provides a stable drilling platform
Large safety switch
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size (Diameter):
Column Diameter:
1 HP, 110 V, 1 PH
3/4” (19mm)
5/8” (16 mm)
5 7/8” (150 mm)
11 13/16” x 14 1/2” (300 x 370 mm)
3 1/8” (79 mm)
Spindle Speeds:
250 to 3,200 RPM
Spindle / Chuck Taper:
MT3 / JT3
Overall Height:
68” (1,730 mm)
Base Size:
14” x 22 5/8” (355 x 600 mm)
Swing:
16 15/16”(430 mm)
Weight:
275 lbs (125 kg)
Best Value Guaranteed
22” Floor Drill Press (MI-76450)
T
he Magnum Industrial 22” drill
press is designed to deliver
accuracy, power and a long service
life. With its super-low 120 RPM
cutting speed, it can cut through
stainless and hardened steel,
as well as a variety of other metals,
wood and plastic.
If you need a drill press that can
handle the rigours of your shop,
the MI-76450 has the features
you need and the precision
you expect. It’s built for light
and medium duty professional
applications.
ight
L aser Lr
l
and D ila
G u Fred
atu re
Chucuk
t S afety
O
k
c
o
L
w/
I ncluded
Features:
•
•
•
•
•
•
•
Industrial 1 HP motor with a durable metal hood to keep out dust and debris
Built-in work light with separate on/off switch
Extra-long handles for better feed control
Positive drill stop
Full range of spindle speeds, from 120 to 2,270 RPM
Double-wide spindle bearings and precision spindle reduce vibration during operation
Super low speed, 120 RPM, for drilling stainless and hardened steel
Specifications:
Motor:
Drilling Capacity:
Chuck Size:
Spindle Travel:
Table Size:
Column Diameter:
1 HP, 110 V, 14 A
1 1/4” (32 mm)
3/4” (19 mm)
4 1/2” (114 mm)
16 1/2” x 19”
3 7/8” (92 mm)
Spindle Speeds:
(12) 120-2270 RPM
Spindle / Chuck Taper:
MT4 / JT3
Overall Height:
68 3/4” (1746 mm)
Base Size:
19 1/2” x 22 1/2” (495 x 558 mm)
Swing:
22” (559 mm)
Weight:
380 lbs ( 171 kg)
Best Value Guaranteed
Radial Arm Drill Press (MI-76650)
W
Drills at d
n
C ompou
Angles
ith a 30o tilting head
and a 45o tilting table,
the MI-76650 radial arm drill
press is your solution for drilling
precise compound angles. It also
swings up to 32”—perfect for
applications that need extra
throat capacity. This press is
powered by a 1/2” industrial-grade
motor and can drill holes up to 5/8”
in diameter, so it’s more than just
a specialty unit: It performs well as
an everyday drill press, delivering
accurate, steady drilling through
a variety of materials including
metal, wood, plastics and more.
Features:
•
•
•
•
•
•
•
•
•
Industrial 1/2 HP cast-iron motor delivers smooth drilling power
Table tilts up to 45° and head tilts 30° to accommodate compound angle drilling
Extended table crank handle makes height and tilt adjustments smooth and easy
Durable metal hood holds up in a busy workshops
Positive non-slip drill stop improves depth control and doesn’t slip
Nine spindle speeds handle a variety of applications, wood, metal, plastic and more
High-speed precision spindle bearings ensure a long service life and vibration-free operation
Sturdy cast base provides a steady drilling platform
Standard safety features include line interrupter safety switch and clear chuck guard
Specifications:
Motor:
1/2 HP, 110 V, 8 A
Drilling Capacity:
5/8” (16 mm)
Chuck Size:
5/8” (16 mm)
Spindle Travel:
3 1/8” (80 mm)
Spindle Distance to Table: 31” (790 mm)
Spindle Distance to Base: 49 3/8” (1255 mm)
Table Size:
16 1/2” x 19”
Column Diameter:
2 7/8” (v) / 2 5/16”(h) (73 / 59mm)
Max Spindle Speed:
3580 RPM
Spindle / Chuck Taper: MT2 / JT3
Overall Height:
68” (1730 mm)
Base Size:
11 3/4” x 19 1/2” (300 x 495 mm)
Swing: 8 5/8” to 31 7/8”(220 to 810 mm)
Weight: 165 lbs (75 kg)
Best Value Guaranteed
5/8” Mortiser (MI-77100)
Features:
•
•
•
•
•
•
•
•
•
T
he Magnum Industrial
MI-77100 5/8” mortiser is
versatile and sturdy—ideal for
small-to-medium production
with hard or soft wood.
With a solid cast-iron column
and base, the MI-77100 delivers
steady, vibration-free operation
for mortising projects big and
small: Its table extends to
accommodate large pieces and
its newly designed manual clamp
secures even the smallest.
Sturdy
r
Design fo
Optimal e
anc
Per form
Fan-cooled 1/2 HP motor is fully enclosed for dust protection
Solid cast-iron column and base limit vibration and improve stability
Heavy-duty rack and gear provide steady, accurate travel
Rugged, extra-long feed handle adds leverage and improves feed control
Control rods make it easy to set-up pre-measured depth stops
Gas support strut adds control to each to stroke
Push-button keyed safety switch for operator safety
Line interrupter switch requires reset after power outages and prevents unexpected start up
Includes four chisels and a manual clamp that secures even the smallest workpieces
Specifications:
Motor:
1/2 HP, 110 V, 1 Phase, 6A
Spindle Chuck Capacity:
1/2” (13 mm)
Spindle Speed:
1,720 RPM
Chisel Capacity:
1/4” to 5/8” (6 to 16 mm)
Maximum Chisel Stroke:
5” (127 mm)
Fence Size:
13 5/16” x 2 15/16” (355 x 75 mm)
Distance-Fence to Centre Chisel:
4” (101 mm)
Table Size:
14 1/4” x 11 1/8” (362 x 283 mm)
Table w/ Extensions:
35” x 11 1/8” (890 x 283 mm)
Base Dimensions:
15 9/16” x 17 1/8” (396 x 435 mm)
Overall Height:
24 3/8” (620 mm)
Weight:99 lbs (45 kg)
Best Value Guaranteed
5/8” Heavy-Duty Mortiser (MI-77150)
D
esigned for light-to
medium-duty production
applications with either hard or
soft wood, the MI-77150 5/8”
heavy-duty mortiser is versatile
enough to deliver on custom
projects and comes at a price that
is sure to impress. Its head tilts
up to 30° to allow the workpiece to
remain level and secure on the table
even when mortising on an angle.
Heavy-duty cast-iron
components ensure stable,
vibration-free operation.
Features:
Tilting
Head
• 1/2 HP fan-cooled motor is totally enclosed for protection
from dust and debris
• Head tilts up to 30° left or right for angled mortising and pivots
up to 180° for off-table mortising
• Cast-iron head, column and base deliver stable, vibration-free operation
• Easy-to-adjust depth stops allow consistent, accurate mortising
• Extra-long, wide diameter handle provides leverage and control
• Gas cylinder controls stroke
• New manual clamp with solid-steel chromed hand wheel delivers smooth operation
and securely holds even the smallest workpieces
• Includes four bit and chisel sets and 5/8” and 3/4” sleeves
Specifications:
Motor:
1/2 HP, 110 V, 1 Phase, 3.8A
Chuck Capacity:
1/2” (13 mm)
Spindle Speed:
1,720 RPM
Chisel Capacity:
1/4” to 5/8” (6 to 16 mm)
Maximum Chisel Stroke:
9” (228 mm)
Fence Size:
14 1/8” x 2 7/8” (360 x 73 mm)
Distance-Fence to Centre Chisel:
4” (101 mm)
Distance-Centre Chisel to Table: 6” to 9” (152 to 228 mm)
Table Size:
13 1/2” x 9” (343 x 230 mm)
Base Dimensions:
14 1/8” x 10 3/8” (360 x 265 mm)
Overall Height:
29” (736 mm)
Weight: 106 lbs (48 kg)
Best Value Guaranteed
1” Heavy-Duty Mortiser (MI-77200)
Tilting
Head
Stand Also Available
(MI-99772)
Features:
W
ith a powerful 1 HP motor
and heavy-duty
cast-iron head, column and base,
the Magnum Industrial
77-200 heavy-duty 1” mortiser
is designed for applications
that demand precision and highquality results—such as furniture
making and cabinet production.
Its head tilts up to 30° to allow
the workpiece to remain level and
secure on the table even when
mortising on an angle. Heavy-duty
cast-iron components ensure
stable, vibration-free operation,
providing leverage, accuracy and
control on every stroke.
• 1 HP fan-cooled motor is totally enclosed for protection from dust and debris
• Head tilts up to 30° left or right for angled mortising
• Heavy-duty rack-and-gear reduces operator fatigue and delivers consistent, accurate results in production applications
• Cast-iron head, column and base deliver stable, vibration-free operation
• Solid steel chromed hand wheels allow smooth table adjustments
• Easy-to-adjust depth stops allow consistent, accurate mortising
• Extra-long, wide diameter handle provides leverage and control
• Gas cylinder controls stroke
• Includes four bit and chisel sets and 5/8” and 3/4” sleeves
• Optional deluxe stand (MI-99772) available to improve stability and optimize working height
Specifications:
Motor:
1 HP, 110/220 V, 1 Phase, 10A
Chuck Capacity:
1/2” (13 mm)
Spindle Speed:
1,720 RPM
Chisel Capacity:
1/4” to 1” (6 to 26 mm)
Maximum Chisel Stroke:
8” (200 mm)
Fence Size:
14 1/8” x 2 7/8” (360 x 73 mm)
Distance-Fence to Centre Chisel:
3” (77 mm)
Distance-Centre Chisel to Table: 6 1/2” to 10 3/16” (165 to 259 mm)
Table Size:
12 1/2” x 18” (318 x 458 mm)
Base Dimensions:
12” x 12” (305 x 305 mm)
Overall Height:
48 1/2” (1232 mm)
Weight:
236 lbs (107.5 kg)
Best Value Guaranteed
13 Spindle Boring Machine (MI-77400)
D
Bores
s
13 Hole
I n O ne
Stroke
Features:
•
•
•
•
•
•
•
•
•
esigned for pro cabinet shops
and made to deliver efficient
and accurate results, the Magnum
Industrial MI-77400 13 spindle
boring machine drills 13 holes
in a single stroke, so you can
produce holes for European-style
adjustable shelves and accessory
hardware. The MI-77400 comes
loaded with time saving features
including handy work stops for
boring consistent parallel patterns
and indexing pins for aligning longer
workpieces, like pantry doors or
book shelves. Plus, with its
heavy-duty construction and
11/2 HP motor, the MI-77400
is rugged enough to meet the
demands of your shop.
11/2 HP motor powers through the toughest laminate and solid wood
Built-in fence with work stops on each end allow precise repeat drilling on multiple work pieces
Indexing pins provide consistent alignment and ensure accuracy when boring extra long pieces
Adjustable depth stops deliver consistent results and an efficient work flow
Heavy-duty cast-iron construction meets the demands
of professional cabinet manufacturers
Long lever delivers effortless action and improved control
Extra-wide floor stand provides stability and vibration-free operation
Includes 5 mm boring bits with 10 mm shank
Optional Blum-style hinge boring head (MI-99745) available
Specifications:
Motor:
1 HP, 110/220 V, 1 Phase, 10A
Chuck Capacity:
1/2” (10 mm) shank
Spindle Speed:
1,720 RPM
Chisel Capacity:
1/4” to 1” (6 to 26 mm)
Maximum Chisel Stroke:
8” (200 mm)
Fence Size:
14 1/8” x 2 7/8” (360 x 73 mm)
MI-99745
Distance-Fence to Centre Chisel:
3” (77 mm)
Distance-Centre Chisel to Table: 6 1/2” to 10 3/16” (165 to 259 mm)
Table Size:
12 1/2” x 18” (318 x 458 mm)
Base Dimensions:
12” x 12” (305 x 305 mm)
Overall Height:
48 1/2” (1232 mm)
Weight:
236 lbs (107.5 kg)
Best Value Guaranteed
Hinge Boring Machine (MI-77450)
P
owerful, sturdy and efficient,
the Magnum Industrial
MI-77450 hinge boring machine
saves you time when installing
Blum-style hinges, drilling the
35 mm centre hole and both 8 mm
screw holes in one stroke.
It also includes an installation
plunger so you won’t have to
hammer the hinge into place.
Pre-drilling cabinet doors has never
been easier!
Features:
O ne
e
Stroklling
ri
Pre-Dor
f
tyle
S
m
Bl u
s
H i nge
Powerful 1 HP motor drills through the toughest laminate and solid wood
Long lever control for effortless action
Precision work stops allow accurate repeat drilling on multiple work pieces
Heavy-duty cast-iron construction meets the demands
of professional cabinet manufacturers
• Extra-wide open steel stand provides stability and
vibration-free operation
• Uses standard 10 mm shank chucks
• Includes one 35 mm carbide bit and two 8 mm carbide bits
•
•
•
•
Specifications:
Motor:
1 HP, 110 V, 1 Phase, 15A
Collet Size:
3/8” (10 mm)
Spindle Speed:
3450 RPM
Hinge Type:
Blum-Style
Maximum Stock Thickness:
5 1/2” (140 mm)
Fence Size:
66 1/8” x 105 1/2” (1680 x 2680 mm)
45mm Drilling Pattern
Maximum Depth of Stroke:
4 5/8” (120 mm)
Maximum Depth (Bit to Fence): 3 1/2” (88 mm)
Table Size:
31 1/2” x 23 5/8” (800 x 600 mm)
Base Dimensions:
12” x 12” (305 x 305 mm)
Table Height (From Floor):
33 1/4” (845 mm)
Weight:
210 lbs (95 kg)
Best Value Guaranteed
8” Bench-Top Jointer (MI-81180)
A
ffordable, accurate and durable, the Magnum Industrial MI-81180 bench-top 8” jointer
combines the cutting capacity of a larger machine with the convenience of a bench-top
model. Its 16 double-sided carbide inserts stay sharp and can handle a variety of wood types.
The MI-81180 is perfect for light-duty jointing and straightening twisted
boards around your home workshop.
Helical
d with
a
e
h
r
e
t
t
Cu
ided
S
e
l
b
u
o
D
I nserts
e
d
i
b
r
a
C
Features:
•
•
•
•
Helical cutterhead with double-sided carbide inserts requires no knife setting gauges
Built-in dust collection outlet helps control loose chips and dust
Tilting fence allows smooth bevel cuts
Includes CAS-approved cutterhead guard
Specifications:
Motor:1 HP, 120V, 10A
Cutterhead Speed:
10,500 RPM
Carbide Inserts:
16 (14 x 14 x 2 mm)
Maximum Cutting Width:
8” (203 mm)
Maximum Cutting Depth:
1/8” (3 mm)
Fence Length:
Table Size:
Work Surface:
Dust Outlet:
Weight:
20” (508 mm)
33 1/2” x 8 “ (850 x 203 mm)
30” x 6 1/8” (762 x 155 mm)
4” (101 mm) w/ 2” Reducer
62 lbs (28kg)
Best Value Guaranteed
8” Jointer with 66” Table (MI-81350)
M
agnum Industrial’s new 8” jointer is tough enough for commercial applications—
yet it’s affordable enough for home workshops. Featuring a rugged 2 HP motor,
a helical cutterhead with 22 carbide inserts, and an extra-long (66”) ground cast-iron table,
the Magnum 81-350 8” jointer is designed to deliver high-quality, accurate results
in a range of applications.
Helical
ad with
e
h
r
e
t
t
u
C
ha n g e
Quick- C nserts
I
Carbide
Features:
•
•
•
•
•
•
2 HP motor powers through a variety of soft and hard woods
Magnum helical cutterhead holds 22 double-sided carbide inserts in four rows
66” x 8” parallelogram-style table is easy to adjust and align for accurate results
Centre-mount fence features double keyways for added stability
Rack-and-pinion fence adjustment allows for quick, precise adjustments
Includes hand paddles and magnetic safety switch
Specifications:
Motor:2 HP, 230V, 10A
Cutterhead Speed:
5,500 RPM
Carbide Inserts:
22 (30 x 12 x 1.5 mm)
Maximum Cutting Width:
8” (203 mm)
Maximum Cutting Depth:
1/2” (13 mm)
Fence:
Fence Tilt:
Table:
Dust Outlet:
Weight:
5” x 37” (127 x 940 mm)
0 - 45o
66” x 8 “ (1,676 x 203 mm)
4” (101 mm)
305 lbs (138kg)
Best Value Guaranteed
14” HD Deluxe Bandsaw (MI-91500)
W
ith an impressive 12" re-saw
capacity, ball-bearing guides
and loads of safety features,
the MI-91500 is the finest 14"
bandsaw in our inventory. This
saw is powerful and easy to use.
Its 11/2 HP motor draws only
12.5 Amps, so you can plug it
into a standard 115 volt outlet.
Whether re-sawing timber or
cutting nonferrous metal, this saw
is the perfect choice for schools,
small manufacturing shops and
serious hobbyists.
n
Europeaith
Design w
w
B ig R e s a
Capacity
Features:
•
•
•
•
•
•
•
•
One-piece solid welded frame & dynamically balanced cast-iron wheels ensure vibration free operation
Ball bearing guide system is designed for smooth, accurate cutting
Safety foot brake with electrical lock-out delivers quick braking in an emergency
Keyed lock-out mag switch provides added security
Two speed settings for re-sawing & non-ferrous metal cutting
Large cast-iron table
Deluxe fence system with cast-iron mitre gauge
Built-in dust collection ports
Specifications:
Motor:
Max Cutting Depth:
Max Cutting Width:
Wheel Size:
Wheel Speeds:
Blade Speeds:
Blade Width:
1.5 HP, 110 V, 1 PH, 12.5 A
12” (304 mm)
13.5” (342 mm)
14” (355 mm)
588 & 840 RPM
2300 & 3250 LFM
1/8” to 3/4” (3mm to19 mm)
Blade Length:
Table Size:
Table Tilt:
Table Height:
Dust Collection Outlets:
Base Dimensions:
Weight:
112” (2844 mm)
16” x 20” (406 x 508 mm)
0o to 45o(right) 7o (left)
36 1/2” (927 mm)
(2) 4” (101 mm)
25” x 15” (635 x 381 mm)
297 lbs (134 kg)
Best Value Guaranteed
14” Electronic Variable Speed Metal/Wood Bandsaw (MI-92100)
F
rom solid steel to plastic and wood, the
MI-92100 cuts it all. It’s an “all-terrain”
band saw with a digital inverter that provides
electronic variable speed control and delivers full
torque at slow speeds.
Designed primarily for ferrous and non-ferrous
metal cutting, this unit is also capable of cutting
wood and plastic. This versatility makes it ideal
for professional handymen and handywomen, busy
maintenance shops and serious home workshops.
Full
Torque
at Any
Speed
Features:
• European-style one-piece solid welded frame and dynamically balanced cast-iron wheels ensure
vibration-free operation
• Ball bearing guide system is engineered for smooth, accurate cutting
• Keyed lock-out mag switch provides added security
• Variable speed range for cutting ferrous and non-ferrous metal, wood or plastic
• Large cast-iron table
• Deluxe fence system with cast-iron mitre gauge
• Built-in dust collection ports
• Deflector shield protects tires
Specifications:
Motor:
Max Cutting Depth:
Max Cutting Width:
Wheel Size:
Blade Speeds:
Blade Width:
Blade Length:
1 1/4 HP, 220 V, 1 PH
12” (304 mm)
13 1/2” (342 mm)
14” (355 mm)
150 to 3,000 LFM
3/8” to 1” (9 to25 mm)
114” (2,895 mm)
Table Size:
16” x 20” (406 x 508 mm)
Table Tilt:-10o to 45o
Table Height:
36” (914 mm)
Dust Collection Outlets:
(2) 4” (101 mm)
Base Dimensions:
25” x 15” (635 x 381mm)
Weight:
308 lbs (140 kg)
Best Value Guaranteed
Universal Mobile Base (MI-99001)
T
his universal mobile base makes
it easy to reposition machinery
around your shop, so you can
quickly set up an efficient work-flow
for any job and keep seldom used
machinery out of the way until
you need it again. The MI-99001
mobile base supports up to
550 lbs and comes standard
with many time-saving features.
550 lb
y
t
i
c
a
p
a
C
Features:
•
•
•
•
•
Two heavy-duty swivel casters provide excellent mobility
Two hard rubber wheels handle full-size machinery without developing flat spots
Caster locks are toggled easily with super-convenient kick-down levers
Leveling feet absorb vibration when casters are retracted
Includes extensions to fit a wide range of common base sizes
Specifications:
Maximum Load:550 lbs (250 lbs)
Size Range for Machinery w/ Square Bases:
11” x 11” to 35 1/4” x 35 1/4” (279 mm x 279 mm to 895 mm x 895 mm)
Size Range for Machinery w/ Rectangular Bases: 17” x 11” to 51” x 19” (431 mm x 279 mm to 1,295 mm x 482 mm)
Best Value Guaranteed
Tenoning Jig (MI-99005)
A
jig can help you complete
repetitive tasks faster and
more accurately. Because it helps
you make precise mitre cuts and
tenon joints on your table saw,
Magnum Industrial’s tenoning jig
is a must-have for any
woodworking shop.
e &
A PrecisJig
Stable kes
That Maork
Your W r
E asie
Features:
Clamp arm tilts to 45o so you can make a range of mitre cuts and tenon joints
Clamp pivots to allow quick setup on small pieces
Clamp and handle are reversible to fit both left and right tilt table saws
Extra-large cast base with ball bearing detents in guide bar provide
a stable platform and smooth operation
• Fits standard 3/8” x 3/4“ mitre slots
•
•
•
•
Specifications:
Stroke:
Tilt:
Vertical Tilt:
2.5” (64 mm)
90o to 45o
90o to 50o
Max Workpiece Thickness:
3” (77 mm)
Weight:25 lbs (11 kg)
Best Value Guaranteed
Cast-Iron Mitre Gauge (MI-99015)
Features:
•
•
•
•
•
Burly cast-iron design with ergonomic handle delivers excellent control
Precise scale with 1 degree increments is accurate and easy to read
Expansion slots in slide bar allow for tight operation, even in worn-out mitre gauge slots
Includes removable T-slot guide ring
Standard 3/4” (19 mm) slide bar fits most stationary table saws
Specifications:
Mitre Capacity:
Steel Slide Bar:
T-Slot:
60 degrees (left/right)
3/4” (19 mm)
29/32” (23 mm)
Best Value Guaranteed
MI-99020
MI-99021
Roller Table (MI-99020)
E
xtendable, flexible and
adjustable, the Magnum
Industrial Roller Tables are like an
extra set of hands in your shop.
Transport lumber from one machine
to another. Support heavy planks
or wide sheets when feeding your
table saw, planer or band saw.
These roller tables adjust to align
with almost any woodworking
machine. They’re flexible, so you can
work around corners, and can be
interconnected so you can handle
longer and wider sheet goods
more efficiently.
250 lb
b
or 500 l s
e
Capaciti
Features:
• Table adjusts from 23” to 36” high to align with a variety of woodworking machinery
• Table width expands from 14 3/4” to 50” to handle lumber and plywood
• Flexes, curves and connects with multiple Magnum Industrial roller tables
for efficient feeding—even around corners
• Nickel-plated rollers provide durability and smooth operation
• Four lockable wheels allow for mobility and stability
• 250 lb capacity
Heavy-Duty Roller Table (MI-99021)
Features:
Table adjusts from 24 1/4” to 37” high to align with a variety of woodworking machinery
Table width expands from 21 1/4” to 51.5” to handle lumber and plywood
Split rollers allow side-by-side two direction feeding
Flexes, curves and connects with multiple Magnum Industrial roller tables
for efficient feeding—even around corners
• Nickel-plated rollers provide durability and smooth operation
• Four lockable wheels allow for mobility and stability
• 500 lb capacity
•
•
•
•
Best Value Guaranteed
T-Lock Fence Kit (MI-99500 & MI-99501)
table board not included
MI-99500 - 32” Short Rail
MI-99501 - 50” Long Rail
Features:
•
•
•
•
•
•
•
•
With
”
0
5
r
o
”
32
R ai l
T-Square design offers self-aligning accuracy
Positive locking mechanism
Ultra-high-molecular-weight polyethylene (UHMW)
Quick-change fence faces
Fully adjustable for parallel positioning
Includes front & rear mounting rails, mounting hardware
32” or 50” right-side cutting capacity
12” left-side ripping capacity
Best Value Guaranteed
MagnaLock Deluxe Fence Kit (MI-99502)
table board not included
Features:
With
52”
R ai l
• Industrial-grade durability for commercial cabinet makers
• Self-aligning accuracy
• Large independent aluminum fence face is adjustable front to back and reversible
for left- or right-tilt saws
• Super-fine adjustments deliver incredible accuracy
• Extra-large bars and rails add provide excellent stability
• Includes front & back mounting rails, mounting hardware and deluxe push stick
• 52” right-side cutting capacity
• 24” left-side ripping capacity
Best Value Guaranteed
Angular Mitre Gauge (MI-99520)
T
Features:
•
•
•
•
•
•
•
lar
Triangun
Desig
Adds
Support
he redesigned Magnum
Industrial MI-99520 angular
mitre gauge features a triangular
design that adds supports and
eliminates the play that can affect
the accuracy of traditional mitre
gauges. The MI-99520 is built to
our specs to help you make precise,
repeatable cuts in professional
production settings. It’s also
equipped with an adjustable wing
that extends up to 42”—ideal
for precision framing projects.
Plus its stop flips out of the way
so you can quickly and safely handle
everything from small pieces
to large panels.
Telescoping wing extends to 42” provides additional support
Anti-slip fence face keeps material in place
Expandable guide bar allows eliminates play
Indexed graduations and automatic stops for popular angles make setup easy
Fence body adjusts left and right to fully support saw blade and reduce clearance
Reversible design compatible with left- or right-hand tilt saws and most mitre slots
Weighs 7.9 lbs
Standard Design
Triangular Design
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project