Product Catalogue
Product
Catalogue
2015 - 2016
Product Catalogue
1
A Complete Solution Portfolio
FirePro delivers a broad portfolio of fire suppression systems and
solutions for numerous applications and industries. FirePro’s state of the
art condensed aerosol fire extinguishing generators are matched with
certified monitoring panels, controllers, detection systems, alarms and all
other relevant accessories. Moreover, they are accompanied by technical
brochures, manuals and software tools. In addition, we provide technical
support and training.
Focus on High Quality
Cost Effective & Practical
FirePro products are certified and listed
by Underwriters Laboratories (UL) in the
United States, as well as by the BSI and
KIWA in Europe. Furthermore, they are
manufactured under strict international
quality and environmental management
standards and requirements. All FirePro
product lines are complemented by an
equally advanced range of detection
and control technologies.
FirePro systems can be ideal for both
conventional and non-conventional
applications. Moreover, they can
be applied in situations which are
considered to be technically or
financially challenging for other
technologies.
Environment Friendly
Technology
FirePro generators are manufactured
with a certified shelf life of 15 years, they
are environmentally and ecologically
friendly, non-toxic, with zero ozone
depletion factor and zero global
warming potential. FirePro and its
partners are Reinventing Safety in the
fire industry.
2
Product Catalogue
Product Catalogue
Support & Expertise
In the highly regulated market of the
fire suppression industry, we match our
products with up to date information
pertaining to fire engineering standards,
applications and worldwide support. Our
global distribution network is comprised
of trained and certified professionals
ready to design, supply, install and
maintain the full range of FirePro
products. FirePro and its partners
currently protect key assets in more than
110 countries worldwide.
3
Product
Catalogue
Index
Section A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 07 - 29
Section D .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 57-67
Fire Extinguishing Condensed Aerosol
Generators For Fixed Installations
Fire Extinguishant Controllers,
Sequential Activators,
Bulb Thermal Actuators
In this section
FirePro Fire Extinguishing Generators
FP-20 / FP-40 / FP-80 / FP-100 / FP-200 / FP-500
FP-1200 / FP-2000 / FP-3000 / FP-4200 / FP-5700
Section B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31 - 37
Section E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 69-75
Fire Extinguishing Condensed Aerosol
Manual Generators
Cables & Accessories
In this section
FirePro Fire Extinguishing Generators
FP-200M / FP-500M / FP-1000M
Section C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39-55
Section F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 77-97
Fire Detection, Warning Devices,
Manual Call Points &
Power Supply Units
Fire Extinguishing
Control Panels
4
Product Catalogue
Product Catalogue
5
Section A
Fire Extinguishing
Condensed Aerosol
Generators For Fixed
Installations
A6
Product Catalogue
Product Catalogue
A7
FP-20
FP-20SE
FP-20T
Product Code: 10135
Product Description: FirePro Fire
Extinguishing Generator FP-20SE.
Product Code: 10620
Product Description: FirePro Fire
Extinguishing Generator FP-20T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• This model discharges through two sets
of outlets (top & bottom)
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model discharges through one
outlet only (bottom).
FP-20TH
Product Code: 10649
Product Description: FirePro Fire
Extinguishing Generator FP-20TH.
Features:
• This model can be activated by a Bulb
Thermal Actuator only and discharges
through one outlet only (bottom).
TECHNICAL INFORMATION
Model
FP-20SE / FP-20T / FP-20TH*
Activation mechanism
Electrical (min. 1.5V DC, 0.8A in 3-4 sec)
*FP-20TH Thermal Activation Only
Current intensity to be tested
Maximum 5 mA
Weight (gross)
310 g (excluding bracket)
Net mass of forming aerosol agent
20 g
Operational discharge time
5 - 10 seconds
Discharge outlets
2
Discharge length
0.5 m
Dimensions (Length X Diameter)
165 mm x 32 mm (incl. connector housing)
Self activation temperature
300 ˚C
Fire Class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A8
Product Catalogue
Product Catalogue
A9
FP-40
FP-40S
FP-40T
Product Code: 10136
Product Description: FirePro Fire
Extinguishing Generator FP-40S.
Product Code: 10609
Product Description: FirePro Fire
Extinguishing Generator FP-40T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• This model discharges through two
sets of outlets (top & bottom)
Features:
• UL, KIWA, BSI, ActivFire Approved
• This model discharges through one
outlet only (bottom).
TECHNICAL INFORMATION
Model
FP-40S / FP-40T
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
610 g (excluding bracket)
Net mass of forming aerosol agent
40 g
Operational discharge time
5 - 10 seconds
Nozzle
N/A
Discharge outlets
2
Discharge length
1.2 m
Dimensions (Length X Diameter)
140 mm x 51 mm
Self activation temperature
300 ºC
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A10
Product Catalogue
Product Catalogue
A11
FP-80
FP-80S
FP-80T
Product Code: 10138
Product Description: FirePro Fire
Extinguishing Generator FP-80S.
Product Code: 10617
Product Description: FirePro Fire
Extinguishing Generator FP-80T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• This model discharges through two
sets of outlets (top & bottom)
Features:
• UL, KIWA, BSI, ActivFire Approved
• This model discharges through one
outlet only (bottom).
TECHNICAL INFORMATION
Model
FP-80S / FP-80T
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
870 g (excluding bracket)
Net mass of forming aerosol agent
80 g
Operational discharge time
5 - 10 seconds
Discharge outlets
2
Discharge length
2m
Dimensions (Length X Diameter)
185 mm x 51 mm (incl. connector housing)
Self activation temperature
300 ºC
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A12
Product Catalogue
Product Catalogue
A13
FP-100S
FP-100S
Product Code: 10140
Product Description: FirePro
Fire Extinguishing Generator FP-100S.
Features:
• UL, KIWA, BSI, ActivFire Approved
TECHNICAL INFORMATION
Model
FP-100S
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
1370 g (excluding bracket)
Net mass of forming aerosol agent
100 g
Operational discharge time
5 - 10 seconds
Nozzle
Optional
Discharge outlet
1
Discharge length
1m
Dimensions (Length X Diameter)
155 mm x 84 mm (incl. connector housing)
Self activation temperature
300 ºC
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A14
Product Catalogue
Product Catalogue
A15
FP-200S
FP-200S
Product Code: 10142
Product Description: FirePro
Fire Extinguishing Generator FP-200S.
Features:
• UL, KIWA, BSI, ActivFire Approved
TECHNICAL INFORMATION
Model
FP-200S
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
1840 g (excluding bracket)
Net mass of forming aerosol agent
200 g
Operational discharge time
5 - 10 seconds
Discharge outlets
1
Discharge length
2m
Dimensions (Length X Diameter)
185 mm x 84 mm (incl. connector housing)
Self activation temperature
300 ºC
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A16
Product Catalogue
Product Catalogue
A17
FP-500S
FP-500S
Product Code: 10145
Product Description: FirePro
Fire Extinguishing Generator FP-500S.
Features:
• UL, KIWA, BSI, ActivFire Approved
TECHNICAL INFORMATION
Model
FP-500S
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
3340 g (excluding bracket)
Net mass of forming aerosol agent
500 g
Operational discharge time
5 - 10 seconds
Discharge outlets
1
Discharge length
2.5 m
Dimensions (Length X Diameter)
295 mm x 84 mm (incl. connector housing)
Self activation temperature
300 ºC
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A18
Product Catalogue
Product Catalogue
A19
FP-1200
FP-1200
FP-1200T
Product Code: 10147
Product Description: FirePro Fire
Extinguishing Generator FP-1200.
Product Code: 10316
Product Description: FirePro Fire
Extinguishing Generator FP-1200T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Carbon-Steel casing Red-coated
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• Carbon-Steel casing Red-coated
FP-1200S
FP-1200TS
Product Code: 10395
Product Description: FirePro Fire
Extinguishing Generator FP-1200S.
Product Code: 10622
Product Description: FirePro Fire
Extinguishing Generator FP-1200TS.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Stainless steel casing
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model can be activated by a Bulb
Thermal Activator
• Stainless steel casing
TECHNICAL INFORMATION
Model
FP-1200 / FP-1200S / FP-1200T / FP-1200TS
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
10900 g (excluding bracket)
Net mass of forming aerosol agent
1200 g
Operational discharge time
10 - 15 seconds
Discharge outlet
1
Discharge length
3.5 m
Dimensions
216 mm x 300 mm x 167 mm
Self activation temperature
N/A
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A20
Product Catalogue
Product Catalogue
A21
FP-2000
FP-2000
FP-2000T
Product Code: 10149
Product Description: FirePro Fire
Extinguishing Generator FP-2000.
Product Code: 10317
Product Description: FirePro Fire
Extinguishing Generator FP-2000T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Carbon-Steel casing Red-coated
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• Carbon-Steel casing Red-coated
FP-2000TS
FP-2000S
Product Code: 10392
Product Description: FirePro Fire
Extinguishing Generator FP-2000S.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Stainless steel casing
Product Code: 10623
Product Description: FirePro Fire
Extinguishing Generator FP-2000TS.
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model can be activated by a Bulb
Thermal Activator
• Stainless steel casing
TECHNICAL INFORMATION
Model
FP-2000 / FP-2000S / FP-2000T / FP-2000TS
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
15500 g (excluding bracket)
Net mass of forming aerosol agent
2000 g
Operational discharge time
10 - 15 seconds
Discharge outlet
1
Discharge length
3.5 m
Dimensions
300 mm x 300 mm x 185 mm
Self activation temperature
300 °C
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A22
Product Catalogue
Product Catalogue
A23
FP-3000
FP-3000
FP-3000T
Product Code: 10150
Product Description: FirePro Fire
Extinguishing Generator FP-3000.
Product Code: 10318
Product Description: FirePro Fire
Extinguishing Generator FP-3000T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Carbon-Steel casing Red-coated
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• Carbon-Steel casing Red-coated
FP-3000S
FP-3000TS
Product Code: 10393
Product Description: FirePro Fire
Extinguishing Generator FP-3000S.
Product Code: 10624
Product Description: FirePro Fire
Extinguishing Generator FP-3000TS.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Stainless steel casing
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model can be activated by a
Bulb Thermal Activator
• Stainless steel casing
TECHNICAL INFORMATION
Model
FP-3000 / FP-3000S / FP-3000T / FP-3000TS
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
16300 g (excluding bracket)
Net mass of forming aerosol agent
3000 g
Operational discharge time
15 - 20 seconds
Discharge outlets
1
Discharge length
4m
Dimensions
300 mm x 300 mm x 185 mm
Self activation temperature
300 °C
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A24
Product Catalogue
Product Catalogue
A25
FP-4200
FP-4200T
FP-4200TS
Product Code: 10338
Product Description: FirePro Fire
Extinguishing Generator
FP-4200T.
Product Code: 10644
Product Description: FirePro Fire
Extinguishing Generator
FP-4200TS.
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• Carbon-Steel casing Red-coated
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model can be activated by a
Bulb Thermal Activator.
• Stainless steel casing.
TECHNICAL INFORMATION
Model
FP-4200T / FP-4200TS
Activation mechanism
Thermal
Electrical (6 - 36 V D/C 0.8 A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
25000 g (excluding bracket)
Net mass of forming aerosol agent
4200 g
Operational discharge time
15 - 20 seconds
Discharge outlets
1
Discharge length
7m
Dimensions
300 mm x 300 mm x 300 mm
Self activation temperature
300 °C
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A26
Product Catalogue
Product Catalogue
A27
FP-5700
FP-5700
FP-5700T
Product Code: 10151
Product Description: FirePro Fire
Extinguishing Generator FP-5700.
Product Code: 10319
Product Description: FirePro Fire
Extinguishing Generator FP-5700T.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Carbon-Steel casing Red-coated
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• Carbon-Steel casing Red-coated
FP-5700S
Product Code: 10391
Product Description: FirePro Fire
Extinguishing Generator FP-5700S.
Features:
• UL, KIWA, BSI, ActivFire Approved
• Stainless steel casing
FP-5700TS
Product Code: 10625
Product Description: FirePro
Fire Extinguishing Generator
FP-5700TS.
Features:
• Under Process to be UL, KIWA, BSI,
ActivFire Approved
• This model can be activated by a
Bulb Thermal Activator.
• Stainless steel casing.
TECHNICAL INFORMATION
Model
FP-5700 / FP-5700S / FP-5700T / FP-5700TS
Activation mechanism
Thermal
Electrical (min 1.5V DC, 0.8A in 3-4 sec)
Activator type
Heating element with 2.3 ohm resitance
Current intensity to be tested
Maximum 5 mA
Weight (gross)
26400 g (excluding bracket)
Net mass of forming aerosol agent
5700 g
Operational discharge time
15 - 20 seconds
Discharge outlets
1
Discharge length
8m
Dimensions
300 mm x 300 mm x 300 mm
Self activation temperature
300 °C
Fire class
A, B, C, F
Operating temperatures: 54ºC to +54ºC | Generators are provided complete with brackets
A28
Product Catalogue
Product Catalogue
A29
Section B
Fire Extinguishing
Condensed Aerosol
Manual Generators
B30
Product Catalogue
Product Catalogue
B31
FP-200M
FP-200M
Product Code: 10143
Product Description:
FirePro Fire Extinguishing
Manual Generator FP-200M
Features:
Manually Activated Generator
TECHNICAL INFORMATION
B32
Product Catalogue
Model
FP-200M
Type
Cold
Activation mechanism
Manual, by removing activation pin
Activator type
Thermal Activator
Current intensity to be tested
N/A
Weight (gross)
1800 g
Net mass of forming aerosol agent
200 g
Operational discharge time
10 - 15 seconds
Discharge outlets
1
Discharge length
2m
Dimensions
150 mm x 84 mm
Self activation temperature
300 ºC
Fire class
A, B, C, F
Product Catalogue
B33
FP-500M
FP-500M
Product Code: 10347
Product Description:
FirePro Fire Extinguishing
Manual Generator FP-500M
Features:
Manually Activated Generator
TECHNICAL INFORMATION
B34
Product Catalogue
Model
FP-500M
Type
Cold
Activation mechanism
Manual, by removing activation pin
Activator type
Thermal Activator
Current intensity to be tested
N/A
Weight (gross)
1910 g
Net mass of forming aerosol agent
500 g
Operational discharge time
10 - 15 seconds
Discharge outlets
1
Discharge length
2m
Dimensions
150 mm x 84 mm
Self activation temperature
300 ºC
Fire class
A, B, C, F
Product Catalogue
B35
FP-1000M
FP-1000M
Product Code: 10146
Product Description:
FirePro Fire Extinguishing
Manual Generator FP-1000M
Features:
Manually Activated Generator
TECHNICAL INFORMATION
B36
Product Catalogue
Model
FP-1000M
Type
Hot
Activation mechanism
Manual, by removing activation pin
Activator type
Thermal Activator
Current intensity to be tested
N/A
Weight (gross)
2240 g
Net mass of forming aerosol agent
1000 g
Operational discharge time
20 - 25 seconds
Discharge outlets
2
Discharge length
3m
Dimensions
200 mm x 84 mm
Self activation temperature
300 ºC
Fire class
A, B, C, F
Product Catalogue
B37
Section C
Fire Extinguishing
Control Panels
C38
Product Catalogue
Product Catalogue
C39
FirePro-Kentec Sigma A-XT
Extinguishant Control Panel
Product Code: 10279
Product Description: FireProKentec Sigma A-XT Extinguishant
Control Panel 230V (K1810-13)
Product Code: 10502
Product Description: FireProKentec Sigma A-XT Extinguishant
Control Panel 115V (K1810-12)
Extinguishant
Status Indicator
Product Code: 10667
Product Description: Sigma A-SI
Extinguishant Status Indicator
Full (K1821-19)
PRODUCT OVERVIEW
Product Code: 10627
Product Description: Sigma A-SI
Extinguishant Status Indicator
Light (K1821-17)
FEATURES
The Sigma A-Si range of status indicators
provide detailed status information for
Sigma A-XT releasing control equipment.
• UL864 and FM Listed
• 6 lamp status unit with mode
select keyswitch
• Detailed indication of the status
of the control panel
Sigma A-XTAncillary Board
FEATURES
• UL864 and FM listed
• Single area extinguishant panel
• 3 detection zones
• 1 extinguishant output
Product Code: 10636
Product Description: Sigma A-XT
Ancillary Board (K1822-10)
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Designed and manufactured to the highest
standards in a quality controlled environment and
with UL and FM approvals, the Sigma A-XT releasing
panel offers outstanding value and performance for
all small to medium fixed firefighting installations.
C40
Sigma A-SI
The Sigma A-XT Ancillary Board is
compatible with all Sigma A-XT control
panels. It provides volt free normally
open contacts allowing control of subsystems and plant remotely from the
main panel over a two wire data bus.
Product Catalogue
Product Catalogue
FEATURES
• UL864 and FM listed
• Two wire serial connection
• Up to 7 per system
C41
FirePro-Kentec
Sigma XT
Kentec Sigma SI
Product Code: 10176
Product Description: FireProKentec Sigma XT Extinguishant
Control Panel FP-(K11031M2)
Product Code: 10279
Product Description: Kentec
Sigma SI Extinguishant Status
Indicators - Full (K911113M8)
Extinguishant Status Indicators
Extinguishant Control Panel
Product Code: 10485
Product Description: Kentec
Sigma SI Extinguishant Status
Indicators - Light (K911110M8)
FEATURES
• Approved to EN12094-1, EN54-2 and EN54-4
• Single Area Extinguishant Panel
• 3 Detection Zones
• 1 Extinguishant Output
FEATURES
• Approved to EN12094-1, EN54-2 and EN54-4
• 6 lamp status unit with mode select keyswitch
• High brightness LEDs
• Detailed indication of the status of the control panel
PRODUCT OVERVIEW
Designed and manufactured to the highest
standards in a quality controlled environment and
with European EN12094-1 approvals, the Sigma XT
extinguishant releasing panel offers outstanding
value and performance for all small to medium fixed
firefighting installations.
C42
PRODUCT OVERVIEW
The Sigma SI range of status indicators provide
detailed status information for Sigma XT/XT+
extinguishant release control equipment.
Product Catalogue
Product Catalogue
C43
Kentec Sigma XT
Kentec Sigma XT+
Product Code: 10648
Product Description:
Kentec Sigma XT
Ancillary Board (K588)
Product Code: 10358
Product Description: Kentec Sigma XT+
Extinguishant Status Indicators,
4 Zones, 2 Areas (FP-K21042M3)
Ancillary Board
Extinguishant Status Indicators
Product Code: 10459
Product Description: Kentec Sigma XT+
Extinguishant Status Indicators,
8 Zones, 2 Areas (FP-K21082M3)
Product Code: 10177
Product Description: Kentec Sigma XT+
Extinguishant Status Indicators,
8 Zones, 3 Areas (FP-K21083M4)
Product Code: 10178
Product Description: Kentec Sigma XT+
Extinguishant Status Indicators,
8 Zones, 4 Areas (FP-K21084M4)
FEATURES
• 2 Wire Serial Connection
• Up to 7 per System
• Volt-free Relay Outputs for Fire and Extinguishing System
PRODUCT OVERVIEW
The Sigma XT Ancillary Board is compatible with
all Sigma XT control panels. It provides volt-free
normally open contacts allowing control of subsystems and plants remotely from the main panel
over a two-wire data bus.
C44
FEATURES
• Approved to EN12094-1,
EN54-2 and EN54-4
• 2, 4 or 8 detection zones
• 1 to 4 extinguishant areas
• Dual extinguishant outputs
for each area
PRODUCT OVERVIEW
Sigma XT+ control panels are multi-area extinguishant control
panels with up to 4 extinguishant areas available.
Product Catalogue
Product Catalogue
C45
Telefire
Telefire
Product Code: 10390
Product Description: Telefire
Extinguishant Control Panel (TSA-200X)
Product Code: 10391
Product Description: Telefire
Extinguishant Control Panel (TSA-1000X)
Extinguishant Control Panel
Extinguishant Control Panel
FEATURES
• Complies with all major
international standards:
EN-54, EN-12094,
GOST, IS 1220, CE
• Base system can be expanded
via an optional extinguishing module
• 2 Detection Zones
FEATURES
• Modularity
• Flexible
• Networking Capability
• History Log
PRODUCT OVERVIEW
The TSA-200X is ideally suited for new and retrofit applications. The
base control panel includes two detection zones, horn output, dialer
output, an alarm and a fault relay, and two open-collector outputs that
can activate a notification LED or a relay with the addition of an optional
extinguishing module adds an extinguishing output, an “extinguishing
activated” output, and three inputs, for extinguishing abort, extinguishing
activation, and pressure switch input. The system includes a
maintenance alert for detectors (dependant on using Telefire detectors),
a function that required, until now, analog addressable panels.
C46
Product Catalogue
PRODUCT OVERVIEW
The TSA-1000 is ideally suited for new and retrofit
applications. Designed for small to medium commercial,
industrial and institutional buildings, it meets and exceeds
the current requirements. The base control panel contains
4 zones, 4 programmable outputs, horn output, dialer
outputs, and 3 programmable relays.
Product Catalogue
C47
Kentec Sigma CP
Kentec Sigma A-CP
Product Code: 10487
Product Description: Kentec
Sigma CP Fire Alarm Zone Panel,
4 Zone (K11040M2)
Product Code: 10661
Product Description: Kentec
Sigma A-CP Fire Alarm Zone
Panel, 4 Zone (K1844-11)
Fire Alarm Zone Panel
Fire Alarm Zone Panel
Product Code: 10662
Product Description: Kentec
Sigma A-CP Fire Alarm Zone
Panel, 8 Zone (K1848-11)
Product Code: 10488
Product Description: Kentec
Sigma CP Fire Alarm Zone Panel,
8 Zone (K11080M2)
C48
FEATURES
FEATURES
• Fully certified to BS EN54-2 and BS EN54-4
• 2-wire and standard version in 2, 4 or 8 Zones
• 2-wire repeaters and ancillary boards
• Fully programmable using simple menu options
• UL864 Approved
• 2-wire and standard versions in 2, 4 or 8 Zones
• 2-wire repeaters and ancillary boards
• Fully programmable using simple menu options
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The Sigma CP range of conventional Fire Control Panels
are available with 2, 4 or 8 Zone Control Panels, which may
be extensively configured via a simple front panel-operated
programming method.
The Sigma A-CP range of conventional Fire Control Panels with
optional built-in communicator are available with 2, 4 or 8 initiating
circuits which may be extensively configured via a simple front
panel operated programming method.
Product Catalogue
Product Catalogue
C49
Kentec Syncro AS
Elite RS
Product Code: 10343
Product Description: Kentec Synchro
AS Analogue Addressable Fire Control
Panel - Argus Vega Protocol, 1-Loop
(V80161M2)
Product Code: 10663
Product Description: Elite RS Analogue
Addressable Fire Control Panel,
1-Loop (K0810-10)
Analogue Addressable Fire Control Panel
Argus Vega Protocol
Priduct Code: 10664
Product Description: Elite RS Analogue
Addressable Fire Control Panel, 2-Loop
(K0820-10)
Product Code: 10467
Product Description: Kentec Synchro
AS Analogue Addressable Fire Control
Panel - Argus Vega Protocol, 2-Loops
(V80162M2)
C50
Analogue Addressable
Fire Control Panel
FEATURES
FEATURES
• Certified to EN54-2 / EN54-4
• 16 zonal LED indicators, large graphic display
• Expandable from 1 to 2 Loops
• Up to 512 additional programmable I/O via Syncro I/O modules
• Stores 500 last events in event log
• UL / FM Approved
• Large graphic display
• Powerful, network wide cause and effects (500 total)
• Stores 1000 last events in history log
• Can be networked with RS / Elite panels
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Syncro AS is a versatile range of open protocol fire alarm control panels
compatible with existing Syncro fire alarm panel technology.
Available with one or two detection loops capable of hosting up to 240
devices (Argus Vega). Suitable for all small to medium sized fire detection
systems, Syncro AS control panels can be expanded and networked to
become part of much larger systems. With its large graphical display and
ergonomic button and indicator layout, the Syncro AS control panel is
simple and straightforward to understand for installers, commissioning
engineers and end users alike.
Elite RS is a versatile range of open protocol fire alarm control panels.
Available with one or two detection loops for a total of 250 primary points or
400 points using subpoints. Elite RS uses leading edge microprocessor based
electronics to provide a flexible control system with high reliability and integrity.
Suitable for all small to medium sized fire detection systems, Elite RS control
panels can be expanded and networked to become part of much larger
systems if the need arises, therefore providing a future proof solution for any
installation.
Product Catalogue
Product Catalogue
C51
FirePro Marine
FirePro Marine
Fire Control Panel
Main Central Panel
Product Code: 10651
Product Description: FirePro
Marine Fire Control Panel
(FPX103C)
Product Code: 10166
Product Description: FirePro
Marine Main Central Panel
(FS12)
FEATURES
• MCA Approved
• Manual or automatic activation of aerosol generators
• Two 8A changeover relay circuits for external warning/shutdown circuits.
• Monitors status and time delay option
• Visual and audible warning of detector and extinguisher line faults
PRODUCT OVERVIEW
The FPX103C panel is used to monitor and control multiple fire detectors
and FirePro generators as part of a marine engine fire protection system.
It can support multiple combinations of up to four flame/smoke/overheat/
linear heat detectors for 24V panel supply and up to two with a 12V panel
supply. The maximum number of FirePro generators, which can be fitted
per panel is four for a 24V panel supply and two for 12V panel supply.
The fire protection system meets the requirements of the SOLAS and the
Recreational Craft Directive/ISO9094 Parts 1 and 2.
C52
Product Catalogue
FEATURES
• DNV Approved (A-12563), according to IMO MSC 1270
• Suitable for use in both small and large installations
• Redundant system
• System monitoring ensures detection of system faults
• 1-Zone smoke detector input
PRODUCT OVERVIEW
The purpose of the FS12 system is to control and monitor a
number of FirePro® aerosol generators mounted on a ship as
part of a fire extinguishing systems.
The primary purpose of the FS12 system is to activate the
aerosol generators in event of fire.
Product Catalogue
C53
FirePro Vehicle
FirePro Vehicle Kit
Control Panel
Vehicle Fire Suppression
System
Product Code: 10167
Product Description: FirePro
Vehicle Control Panel
(FPX106)
VEHICLE KIT
Product Code: 10171
Product Description: FirePro
Vehicle Suppression Kit
FEATURES
• Supports a single loop of Linear Heat Sensor (LHS) or thermal switches.
• Supports single or multiple FirePro extinguisher units.
• Manual Fire Extinguisher Operate button with tamper evident seal.
• Designed to meet the requirements of 89/336/EEC (EMC Directive) and
Automotive Directive 95/54/EC
C54
FEATURES
• Up to 4 Condensed Aerosol Generator units can be connected, supervised
• Detection Line supervision
• Panel, Releasing Line supervision
• LED Fault / Fire / Power indicators
PRODUCT OVERVIEW
PRODUCT OVERVIEW
This is a manually operated fire suppression system, which uses a linear
heat cable detector fitted within the protected area. These linear heat
cable detectors are used to detect heat produced by fire and also set
temperatures classed as extreme for the protected area. The FirePro
generators are only activated manually with human intervention via the
electrical activation switch on the FPX106 panel. The FPX106 panel can
operate multiples of FirePro generators: 12VDC maximum of 2 generators
or 24VDC maximum of 4 generators. These are activated through wiring
to a multiple activation connection block.
This is a manually operated fire suppression system, which uses a linear
heat cable detector fitted within the protected area. These linear heat
cable detectors are used to detect heat produced by fire and also set
temperatures classed as extreme for the protected area. The FirePro
generators are only activated manualy with human intervention via the
electrical activation switch on the FPX106 panel. The FPX106 panel can
operate multiples of FirePro generators: maximum 2 at 12VDC, and maximum
4 at 24VDC. The Bus Kit includes a Vehicle Panel, a fuse box, Linear Heat
Detector cables and supports, a Termination Box, a Junction Box, fireproof
cables and supports, sundries, etc.
Product Catalogue
Product Catalogue
D55
Section D
Fire Extinguishant
Controllers,
Sequential Activators,
Bulb Thermal
Actuators
D56
Product Catalogue
Product Catalogue
D57
FPC-1
FPC-2
Fire Detection and
Extinguishant Controller
Fire Detection and
Extinguishant Controller
Product Code: 10161
Product Description: FPC-1
Extinguishant Controller
D58
Product Code: 10162
Product Description: FPC-2
Extinguishant Controller
FEATURES
FEATURES
• 1 detection zone, supervised
• Operated by 4 alkaline batteries
• Up to 2 FirePro Generators, supervised
• ‘Power On’, ‘Fire’ and ‘Fault’ indicator
• 1 detection zone, supervised
• Fire and Fault alarm relays
• Up to 4 FirePro Generators, supervised
• Internal Buzzer
• ‘Power On’, ‘Fire’ and ‘Fault’ indicator
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The Releasing Device FPC-1, operated by its own
supervised power source enables monitoring, detection
and automatic extinguishing of a fire in an electrical
cabinet using the self-contained heat detector sensor
or an external linear heat detection cable and two
condensed aerosol fire extinguishing units
The Releasing Device FPC-2 enables monitoring, detection
and automatic extinguishing of a fire in an electrical cabinet
using a linear heat detection cable or automatic smoke
detectors and four condensed aerosol fire extinguishing units.
Product Catalogue
Product Catalogue
D59
FPC-4
FirePro-Kentec
Product Code: 10514
Product Description: FPC-4RM
Extinguishant Controller - Metal Case
Product Code: 10173
Product Description: FirePro-Kentec
Sequential Activator - Standard Box
(FP-SA/GEN3.0)
Fire Detection and
Extinguishant Controller
Sequential Activator
Product Code: 10448
Product Description: FPC-4R
Extinguishant Controller- Plastic Case
D60
Product Code: 10486
Product Description: FirePro-Kentec
Sequential Activator - Larger Box
(FP-SA/GEN3.0M8)
FEATURES
FEATURES
• 2 detection zones, not supervised
• Operated by one 3V, CR2 Lithium battery
• Fire alarm relay
• Up to 2 FirePro Generators, not supervised
• UL Approved
• Up to 2 FirePro Generator units, supervised
• Extinguishing Panel, Releasing Line supervision
• LED ‘Fault’ indicator
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The Releasing Device FPC-4 is capable of detecting fire
by using the linear heat detector cable and activating the
condensed aerosol fire extinguishing units automatically in
an electrical cabinet.
Provide connections from the FirePro Sequential Activator to
the Sigma XT, Sigma A-XT, Sigma XT+ Fire Control Panels and
the Sigma XT+ ECU devices using four-conductor cabling.
A maximum of 20 FirePro Sequential Activators can be
connected to each extinguishing line.
Product Catalogue
Product Catalogue
D61
FPC-5
Extinguishant
Controller
FEATURES
• 1 detection zone, supervised
• Operated by one 3V, CR2 Lithium Battery
• 1 Aerosol Generator, not supervised
For Generators
FP-100S / 200S / 500S
For Generators
FP-1200 / 2000 / 3000 /
4200 / 5700
Product Code: 10561
Product Description: FPC-5 Fire
Extinguishant Controller for FP100S/ 200S/ 500S with Gland for
LHD Cable
Product Code: 10562
Product Description: FPC-5 Fire
Extinguishant Controller for boxtype Generators with Gland for
LHD Cable
Product Code: 10558
Product Description: FPC-5 Fire
Extinguishant Controller for FP-100S/
200S/ 500S with Bimetallic Sensor
at 60°C
Product Code: 10559
Product Description: FPC-5 Fire
Extinguishant Controller for boxtype Generators with Bimetallic
Sensor at 60°C
Product Code: 10566
Product Description: FPC-5 Fire
Extinguishant Controller for FP100S/ 200S/ 500S with Bimetallic
Sensor at 70°C
Product Code: 10569
Product Description: FPC-5 Fire
Extinguishant Controller for boxtype Generators with Bimetallic
Sensor at 70°C
Product Code: 10567
Product Description: FPC-5 Fire
Extinguishant Controller for FP100S/ 200S/ 500S with Bimetallic
Sensor at 80°C
Product Code: 10570
Product Description: FPC-5 Fire
Extinguishant Controller for boxtype Generators with Bimetallic
Sensor at 80°C
Product Code: 10568
Product Description: FPC-5 Fire
Extinguishant Controller for FP100S/ 200S/ 500S with Bimetallic
Sensor at 100°C
Product Code: 10571
Product Description: FPC-5 Fire
Extinguishant Controller for boxtype Generators with Bimetallic
Sensor at 100°C
PRODUCT OVERVIEW
The FPC-5 Fire Detection and Actuation Module consists of a control unit, mounted
in a metal housing, which can be interfaced to any condensed aerosol fire
extinguishing unit. It is capable of detecting fire by using the linear heat detector
cable or bimetallic sensor and activating the condensed aerosol fire extinguishing
unit automatically in an electrical cabinet.
For Generators FP-20 / 40 / 80
Product Code: 10560
Product Description: FPC-5 Fire
Extinguishant Controller for FP-20/
40/ 80 with Gland for LHD Cable
Product Code: 10557
Product Description: FPC-5 Fire
Extinguishant Controller for FP-20/
40/ 80 with Bimetallic Sensor at 60°C
Product Code: 10563
Product Description: FPC-5 Fire
Extinguishant Controller for FP20/ 40/ 80 with Bimetallic Sensor
at 70°C
D62
Product Code: 10564
Product Description: FPC-5 Fire
Extinguishant Controller for FP-20/
40/ 80 with Bimetallic Sensor at
80°C
Product Code: 10565
Product Description: FPC-5 Fire
Extinguishant Controller for FP-20/
40/ 80 with Bimetallic Sensor at
100°C
Product Catalogue
Product Catalogue
D63
FirePro-Telefire
FirePro-Telefire
Sequential Activator for
2 Aerosol Generators
Activation Card for
4 Aerosol Generators
Product Code: 10501
Product Description: FirePro-Telefire
Activation Card for 4 Aerosol
Generators (TLA-44)
Product Code: 10500
Product Description: FirePro-Telefire
Sequential Activator for 2 Aerosol
Generators (TLA-42C)
D64
FEATURES
FEATURES
• Condensed Aerosol Generator units supervision
• Extinguishing Panel, releasing line supervision
• LED ‘Fault’ indicator
• Two wire connection
• Condensed Aerosol Generator units supervision
• Extinguishing Panel, releasing line supervision
• LED ‘Fire’ indicator
• Two wire connection
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The TSA-200X can sequentially activate two FirePro Condensed
Aerosol units via a TLA-42C Sequential Extinguishing adapter. It
is possible to connect up to 10 adapters (20 FirePro Condensed
Aerosol units) via the TLA-42C extinguishing adapters.
The TLA-42C module is intended to work with FirePro Aerosol units
activation is sequential (not simultaneous) to all FirePro Condensed
Aerosol units connected to the TLA-42C.
The TSA-200X panel can activate four FirePro Condensed
Aerosol units via a TLA-44 extinguishing adapter. It is
available in two configurations that allow for connecting
either a single module or up to four modules.
TLA-44/1 - Single Module
TLA-44/4 - Four Modules
Activation is simultaneous to all Aerosol deviced connected
to the TLA-44.
Product Catalogue
Product Catalogue
D65
Short BTA
Bulb Thermal
Actuator (BTA)
For Generators FP-20T / 20TH /
40T / 80T / 100S / 200S / 500S
57°C
Product Code: 10549
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 57°C
68°C
Product Code: 10550
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 68°C
FEATURES
79°C
Product Code: 10551
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 79°C
• According to BSEN12259, UL199, LPCB 291a/02
• Temperature rating 57°C, 68°C, 79°C, 93°C, 141°C, 182°C
• 5mm diameter frangible glass bulb
93°C
PRODUCT OVERVIEW
The activation of the FirePro condensed aerosol unit is achieved
thermally by the use of the Bulb Thermal Actuator (BTA), which consists
of two parts: the Bulb Holder and the Activator.
During operation, the liquid within the bulb will expand until the required
operational temperature is reached. At this point, the bulb will burst,
allowing the thermal mechanism to actuate the FPC Solid Compound in
the the Condensed Aerosol Generator.
There are two models of the BTA: the short type used by the cylindrical
types of Condensed Aerosol Fire Extinguishing units, and the long type
used by the box type Condensed Aerosol Fire Extinguishing units.
D66
Product Catalogue
Product Code: 10552
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 93°C
141°C
Product Code: 10553
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 141°C
182°C
Product Code: 10271
Product Description: Bulb Thermal
Actuator Short for cylindrical-type
Generators at 182°C
Product Catalogue
Long BTA
For Generators FP-1200T / 2000T /
3000T / 4200T / 5700T / 1200TS /
2000TS / 3000TS / 4200TS / 5700TS
57°C
Product Code: 10599
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 57°C
68°C
Product Code: 10600
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 68°C
79°C
Product Code: 10601
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 79°C
93°C
Product Code: 10602
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 93°C
141°C
Product Code: 10603
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 141°C
182°C
Product Code: 10604
Product Description: Bulb Thermal
Actuator Long for box-type
Generators at 182°C
D67
Section E
Cables &
Accessories
D68
Product Catalogue
Product Catalogue
E69
Ramcro Fire
Resistant Cables
Cable Glands
Cable 2x1 mm
Product Code: 10063
Product Description: Cable
Glands Nickel Plated M16
Product Code: 10247
Product Description: Fire Resistant
Cable 2x1 mm (RAMCRO-F3)
Cable 4x1 mm
Product Code: 10064
Product Description: Cable
Glands Nickel Plated M20
Product Code: 10248
Product Description: Fire Resistant
Cable 4x1 mm (RAMCRO-F3)
Armoured Cable 2x1 mm
Product Code: 10249
Product Description: Armoured Cable
2x1 mm (RAMCRO)
• EN50262 Approved
• Tapered rings
• Santoprene rubber seal
(Polyolefin) for IP68 protection
PRODUCT OVERVIEW
Glands for use with screened
cable are designed to connect
the screen of the cable to the
enclosure screening system.
Aluminium
Cable Clip
FEATURES
• LPCB (568a/01) and UL 13 (QPTZ.E345186) Approved
• Conductors: Solid (Class 1). Copper conductor to BS EN 60228
• Outer Sheath: LSZH Sheath type LTS3, Max HCL emission @ 800C
• Core identification: Following BS 7629: 1997, 2 cores + drain wire
PRODUCT OVERVIEW
These special multi-core cables are used for fire resistance and circuit
integrity and essentially to prevent life from smoke and noxious fumes and
where sensitive equipment may be damaged by acid forming gases.
E70
FEATURES
Product Catalogue
Product Code: 10153
Product Description:
Self Adhesive Aluminium
Cable Clip 6mm
Product Code: 10154
Product Description:
Self Adhesive Aluminium
Cable Clip 6mm
Product Catalogue
FEATURES
• Self-adhesive
• Light and flexible
• Forms strong bond with any smooth
surface such as metal, plastic, glass,
wood, etc.
PRODUCT OVERVIEW
Self-adhesive aluminium clips which
provide a quick and economical
solutions to various wiring problems.
E71
Magnet with threaded stem
Product Code: 10491
Product Description:
LHD Cable Termination Box
(MK1282 Termination Box)
Product Code: 10640
Product Description: Mounting
Magnet for cylindrical-type
Generators (GTN-25)
FEATURES
FEATURES
PRODUCT OVERVIEW
• End of line termination box
for fire resistant cables and
linear heat detector cables.
The MK1282 termination box is suitable
for terminating the linear heat detector
cable and contributes in the prevention
of unwanted short circuits by preventing
cable exposure to the installation
environment.
Simulation
Lamp
• Material: NdFeB
• Coating: Nickel-plated
• Steel: Q235
• Magnetisation: N42
Product Code: 10332
Product Description:
Simulation Lamp
(B3441 / 24V, MES 1.2W)
PRODUCT OVERVIEW
Magnets will substitute the screws necessary for
installing / fixing the cylindrical FirePro Fire Extinguishing
Condensed Aerosol units. The magnets can be used for
the mounting of all cylindrical FirePro Generators
E72
Termination Box
Product Catalogue
FEATURES
PRODUCT OVERVIEW
• FirePro Generator
simulation lamp
Simulates the characteristics of the
Condensed Awerosol Generator unit.
Suitable for system commissioning and
system maintenance.
Product Catalogue
E73
3VDC Battery
7A/H 12V Battery
Product Code: 10524
Product Description:
3VDC Battery CR2-BL1
Product Code: 10199
Product Description:
7A/H 12V Battery
24-107F PS7.5L-12
FEATURES
FEATURES
• UL Approved
• Chemical System: Lithium / Manganese Dioxide (Li/MnO2)
• Designation: IEC-CR2
• Operating Temperature: -40°C to 60°C
• Typical Capacity: 800 mAh (to 2.0 volts)
• Max Discharge: 1000 mA continuous (2500 mA pulse)
• UL Approved (BAZR2.MH28792)
• Classification: “SAL”
• Nominal Voltage: 12.0 Volts
• Typical Capacity: 7.5Ah
• Max Discharge: 113A/5S
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The CR2 Battery can be used with the FPC-4RM and FPC-5 units.
E74
Product Catalogue
The sealed lead acid batteries provide standby power to the fire
alarm and extinguishant control panels in the event of mains failure.
Product Catalogue
E75
Section F
Detection,
Warning Devices,
Manual Call Points &
Power Supply Units
F76
Product Catalogue
Product Catalogue
F77
Manual Extinguishant
Disablement Switch
Conventional 6-inch
Base for Detector
Product Code: 10515
Product Description: Manual
Extinguishant Disablement
Switch (VF1832-10)
Product Code: 10637
Product Description:
Conventional 6-inch Base for
Detector (VF2051-00)
PRODUCT OVERVIEW
FEATURES
• UL (UOXX.S24832) Approved
The Manual Extinguishant Disablement
Switch has been designed to support
UL 2775 and can be interfaced with the
Sigma Series extinguishant panels.
FEATURES
Abort Switch
Surface Mount
• UL (UROX.S6661) Approved
• Contains a security locking tab for tamper protection
• Alarm Current: 93mA (136mA @ 33V max.)
• SLC Loop Idle Current: 110 μA
• Compatibility Identifier: HB-3
Product Code: 10423
Product Description: Abort Switch
Surface Mount (VF1823-10)
F78
PRODUCT OVERVIEW
FEATURES
PRODUCT OVERVIEW
• UL (UOXX.S24832) Approved
• Red hold SW
The abort switch can be interfaced with
the Sigma Series extinguishant panels.
Product Catalogue
The VF2051 Series is designed specifically for use with VES
Conventional Models VF2032 Photoelectric Smoke Detector,
VF2020 Fixed Temperature / Rate-of-Rise Heat Detector.
The Base is an electronics-free 6” base featuring a plastic
tamper-lock lug. Each base is equipped with a resistor.
Product Catalogue
F79
F80
Conventional Photo
Electric Smoke Detector
Conventional Heat Detector
Product Code: 10638
Product Description:
Conventional Photo Electric
Smoke Detector
(VF2032-00)
Product Code: 10639
Product Description:
Conventional Heat Detector
(VF2020-00)
FEATURES
FEATURES
• FM & UL (UROX.S6661) Approved
• Low Profile - 1.8” high (with base)
• Highly stable operation, RF / Transient protection
• Low standby current, 45μA at 24VDC
• Two built-in power / alarm LEDs
• FM & UL (UQGS.S6660) Approved
• Choice of fixed temperature / rate-of-rise 135°C
• Low standby current, 35μA nominal
• Two built-in power / alarm LEDs for 360° viewing
• Power / alarm LEDs confirm detector status
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The VF2032 photoelectric smoke detector utilizes two bi-colored
LEDs for indication of status. In a normal standby condition the
LEDs flash green every 3 seconds. When the detector senses
smoke and goes into alarm the status LEDs will turn red.
The VF2020 fixed temperature / rate-of-rise heat detectors are
suited to detect the presence of slow or fast rising temperatures to
burning combustibles. They are also suited for installation where
high heat output fires are expected or in areas where ambient
conditions would not allow use of other detection methods.
Product Catalogue
Product Catalogue
F81
Horn Strobe
Fire Alarm Bell
F82
Product Code: 10424
Product Description:
Fire Alarm Bell (GB6-24)
Product Code: 10446
Product Description:
Horn Strobe (GEC24-15/75WR)
FEATURES
FEATURES
• UL (ULSZ.S3406) Approved
• Meets UL464 requirements
• High dbA output
• Electrical box UL listed for outdoor use
• Available in red metal finish
• UL (UVAV.S3834) Approved
• Synchronize strobe and/or horn with Gentex AVSM Control Module
• Switch selection for high or low dBA
• Switch for chime, whoop, mechanical and 2400Hz tone
• Surface mount with the GSB (Gentex Surface Mount Box)
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The GB Series provide the durable and dependable operation
required for life safety alarm systems. The GB Series is available
in 6” housing and listed for indoor and outdoor applications.
Bells must be used with the GBBB box for outdoor use.
The Gentex GEC24-125/75WR Low-frequency Horn Strobe (red)
offers dependable audible and visual alarms, a low current draw,
and a minimum flash rate of 1 Hz regardless of input voltage.
Product Catalogue
Product Catalogue
F83
Conventional Base for Detector
Gas Release Sign
Product Code: 10227
Product Description:
Gas Release Sign (FL-24)
Product Code: 10192
Product Description:
Conventional Base
for Detector (UBR100)
Product Code: 10226
Product Description:
Gas Release Sign Waterproof (FL-65)
F84
FEATURES
FEATURES
• Operating voltage: 12-24V DC
• Current consumption: 70mA
• Material of construction: PC/ABS
• FL-65 IP rate: IP42
• LPCB (928e) & VDS Approved
• Secure and reliable cable termination
• A useful terminal provides remote indicator output
• Low insertion force for detector
• Operating voltage 12-24V DC
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Alarm light of an operating voltage of 12-24V DC for
connection to extinguishing panel. It is equipped with 4 LEDs
as a light source and provides a hgh light performance with
especially low consumption. The packaging also includes a
‘STOP GAS’ sticker. A weatherproof version is also available
with a protection rate of IP42. The product is compliant to the
European Standard EN54.
The UB100 Series is designed specifically for use with the
conventional Model S1000 Photoelectric Smoke Detector, S3500
Fixed Temperature / Rate-of-rise Heat Detector. Available with
deep base (DBS100) and relay base (BLR100)
Product Catalogue
Product Catalogue
F85
Conventional Smoke
Photo Detector
Conventional Thermal Detector
Rate-of-rise
Product Code: 10195
Product Description:
Conventional Thermal Detector
Rate-of-rise (S3500A1R)
Product Code: 10193
Product Description:
Conventional Optical Smoke
Detector (S1000)
F86
FEATURES
FEATURES
• LPCB (928e) & VDS Approved
• Central LED providing 360° visibility
• Operating voltage 10-30V DC
• Low standby current: 60μA at 24V DC
• Built-in alarm LED
• LPCB (928e) & VDS Approved
• Central LED providing 360° visibility
• Operating voltage 10-30V DC
• Low standby current: 60μA at 24V DC
• Built-in alarm LED
PRODUCT OVERVIEW
PRODUCT OVERVIEW
This type of detector continuously samples the air in the protected
area to provide the earliest warning of fire and yet offers a high
level of false alarm rejection. This devide benefits from a “Double
Dust Trap” incorporated into the design of the smoke entry ports,
hence limiting potential contamination and extending periods
between maintenance without compromising sensitivity of
response. These detectors are designed for open area protection
and must only be connected to conventional control panels.
The S3500A1R conventional thermal detector is designed to
detect fire conditions from rate-of-rise temperature and provide
high immunity to false alarms. This type of detector continuously
samples the temperature variation in the protected area to provide
the earliest warning of fire and yet offers a high level of false alarm
rejection. These detectors are designed for open area protection
and must only be connected to conventional control panels.
Product Catalogue
Product Catalogue
F87
Conventional Thermal Detector (HT)
Linear Heat Detection Cable
Product Code: 10244
Product Description: Linear Heat
Detection Cable TH68°C (TH68N)
Product Code: 10194
Product Description:
Conventional Thermal Detector
Heat (S3500/B)
Product Code: 10245
Product Description: Linear Heat
Detection Cable TH88°C (TH88N)
Product Code: 10246
Product Description: Linear Heat
Detection Cable TH105°C (TH105N)
FEATURES
• LPCB (928e) & VDS Approved
• Central LED providing 360° visibility
• Operating voltage 10-30V DC
• Low standby current: 60μA at 24V DC
• Built-in alarm LED
FEATURES
• FM, UL & ATEX Approved
• Low cost and fast response
• Not affected by RFI or EMC
• Not restricted by local ambient temperatures
• Section replacement of sensor cable after alarm
PRODUCT OVERVIEW
The S3500/B Conventional Thermal Detector is designed to
detect fire conditions from fixed temperature thermal conditions
and provide high immunity to false alarms. This type of detector
continuously samples the temperature variation in the protected
area to provide the earliest warning of fire and yet offers a high
level of false alarm rejection. These detectors are designed
for open area protection and must only be connected to
conventional control panels. These detectors are designed
for open area protection and must only be connected to
conventional control panels.
F88
Product Catalogue
PRODUCT OVERVIEW
Linear Heat Detection Cables are manifactured as two twisted
and tensioned tin-plated copper-coated steel conductors. Around
each conductor is extruded temperature sensitive material which
softens at its pre-determined temperture, and the conductors come
together to produce the required alarm signal.
Sensor cables are suitable for use within dirty, dusty, damp
environments, areas of limired access and surveillance. As a
combined cable and detector, the sensor cable can be installed
close to the risk or at ceiling or roof height.
Product Catalogue
F89
Linear Heat Detector
Interface Unit
ReSet
Product Code: 10187
Product Description: ReSet Isolation Switch
Blue (RPBS11CL)
Product Code: 10665
Product Description: Linear Heat
Detector Interface Unit ZI-01 1 Channel
Product Code: 10365
Product Description: ReSet Release Button
Yellow (RPYS11CL)
Product Code: 10650
Product Description: Linear Heat
Detector Interface Unit ZI-02 2
Channel
Product Code: 10396
Product Description: ReSet Abort Button
Green (RPYS11CL)
FEATURES
Product Code: 10666
Product Description: Linear Heat
Detector Interface Unit ZI-07 Host Unit
• Positive activation that mimics the feel of
breaking glass
• Visible warning flag confirms activation
• Simple key to reset operating element
• No glass elements to break, lose or incorrectly
fit during installation
• Doube pole version
FEATURES
• FM, UL & ATEX Approved
• Color-coded LCD Display
• Solid state volt-free contacts for Alarm & Fault signalling
• Connection to 2000m / 6500ft Proline TH Sensor Cable
• MTBF of more than 5,000,000 hours
PRODUCT OVERVIEW
PRODUCT OVERVIEW
With almost all Industrial alarm conditions able to be detected as
an overheat (pre-fire / nil flame) situation, accurate Alarm Point
Location feature (which can be repeated onto any customer control
panel) assists with rapid alarm identification, helping prevent the
progression of the alarm condition to a combustible level.
F90
Product Catalogue
The ReSet is a unique switch that mimics the feel of breaking glass while
offering the benefits and environmental advantages of a resettable
operating element. It uses a simple yet ingenious patented mechanism
which consists of a rigid plastic operating element and an over center
spring mechanism. This arrangement provides real action upon operation
and simulates break glass activation.
An activation indicator drops into view at the top of the window after the
ReSet has been operated. The unit is then simply reset with a key and is
again ready for use.
Product Catalogue
F91
Fire Alarm Bell
Flashni
Product Code: 10200
Product Description: Fire Alarm
Bell 6 Inch (MBM246)
Product Code: 10207
Product Description: External
Sounder Beacon 18-30V DC
(Flashni)
6 Inch
External Sounder Beacon
Product Code: 10417
Product Description: External
Sounder Beacon 12V DC
(Flashni)
F92
FEATURES
FEATURES
• High sound output
• Low current consumption
• Simple Installation
• Multi-fixing base plate
• High output sounder beacon
• Automatic sounder synchronisation
• Choice of lens / sounder color
• Base compatible with RoLP & Solex beacons
• Lockable base
PRODUCT OVERVIEW
PRODUCT OVERVIEW
All internal bells incorportate highly efficient
rotary centrifugal movements combining
high sound output with low current
consumption.
The Flashni is an audible and visual device which requires a single
installation point. This greatly reduced installaiton and costs and is
much less obtrusive than two separate devices.
Versions available with sounder and beacon linked or with
separate terminals for independent operation.
Product Catalogue
Product Catalogue
F93
Roshni Low Profile
Electronic Sounder
Speech Dialler
Product Code: 10196
Product Description:
Speech Dialer (SD1+)
Product Code: 10209
Product Description: Low Profile
Electronic Sounder - Roshni
(MWS423)
Product Code: 10198
Product Description:
Speech Dialer (SD3+)
FEATURES
• Works in conjunction with all quality control panels
• 8-character Starburst LCD display
• Up to 40 seconds recording time
• Integral microphone and loudspeaker
• Call abort
FEATURES
• LPCB Approved(378b/02)
• High sound output
• Low current consumption
• 32 tones (user selectable)
• Second tone for two-stage alarms
• Lockable base
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The Roshni Low Profile (RoLP) is the fire alarm market’s leading
conventional sounder, although it finds uses in much wider
applications such as security, general signaling and process
alarms. The wide operating voltage and range of tones
available to the user make this flexible sounder supremely
adaptable in even its most basic forms.
F94
Product Catalogue
The SD1+ sends pre-recorded voice messages over a conventional
telephone line whenever external equipment triggers one of its four
inputs. Any equipment that has a voltage-free contact as an output
can provide an input to the unit. Each input (A, B, C, D) triggers the
corresponding message A, B, C or D.
The SD3+ can communicate via PSTN line, a GSM network or both
together, with the user’s option of which one should dial out first.
The unit is fully self-programmable letting you enter up to 10 contact
numbers, select the type of message (voice or SMS), which should
go to each, and allowing you to store spoken or text messages to
suit your requirements.
Product Catalogue
F95
Kentec
Power Supply
Boxed Power Supply Unit
Product Code: 10314
Product Description:
Power Supply Unit 2.5A 24V
Unboxed (82425S)
Product Code: 10518
Product Description:
Kentec Boxed Power Supply
Unit 2.5A 24V (K25250M2)
FEATURES
FEATURES
• IMQ-CSV Certified according to UNI EN60950
• Reduced size
• High efficiency
• Recharge Pb batteries
• Available output current: 1.5A, 2.5A, 5A
• BSI Approved (KM 73505) LPCB Approved
• Chassis only or enclosure mounted with battery space
• 230V input
• Regulated, true 24V output
• House up to 7Ah batteries
• Status indicators for monitored faults
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Syncro Power fully certified to EN54-4 power supplies provide a
stable and fully regulated, true 24V output for fire alarm system
applications under all power conditions.
The unique regulation techniques ensure that even when running
on standby batteries, a stable 24V supply is available to all parts of
the system, ensuring that all 24V powered devices connected are
supplied with optimum power.
F96
Product Catalogue
Switching Power Supply Unit with 27.6 Vcc outout voltage available
with output current 2.5A. High efficiency and minimum heat losses,
thanks to the switching technology. The unit is protected from
overloads, polarity reversals and short circuits.
The mains presence is indicated by a green coloured LED.
Specifically recommended in systems that require small to
medium-size power supply units or case suited to accommodate
concentrators or junction boxes.
It is useful for the supply of panels, sounders and bells.
Product Catalogue
F97
Total Flooding
Pre-engineered
System Design
13
11
14
15
Conventional Firefighting System Product Description
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
12
16
4
Extinguishing Panel
1st Stage Sounder 2nd Stage Sounder
Extinguishing Release Indication
Zone 1, Smoke Detectors
Zone 2, Heat Detectors
System Isolation Switch
Interface units
Aerosol Generators
Extractor Fan
Sigma A-XT
GB6-24
GEC24-15/75WR
FL-24
VF2032-00
VF2020-00
VF1832-10
FP-SA/GEN3.0
FP-3000S
Product Code
10279
10424
10446
10227
10638
10639
10515
10173
10393
Addressable Fire Alarm System
Optional integration
with addressable
fire alarm system
5
10
11.
12.
13.
14.
15.
16.
Addressable Fire Alarm Panel
Sounder
Smoke Detectors
Heat Detectors
Manual Call Points
Input / Output supervise module
6
2
3
7
8
1
9
F98
Product Catalogue
Product Catalogue
F99
13
14
15
12
16
11
4
5
10
6
2
3
7
1
Conventional Firefighting System Product Description
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
F100
Extinguishing Panel
1st Stage Sounder 2nd Stage Sounder
Extinguishing Release Indication
Zone 1, Smoke Detectors
Zone 2, Heat Detectors
System Isolation Switch
Interface units
Aerosol Generators
Extractor Fan
Sigma A-XT
GB6-24
GEC24-15/75WR
FL-24
VF2032-00
VF2020-00
VF1832-10
FP-SA/GEN3.0
FP-3000S
8
9
Product Code
10279
10424
10446
10227
10638
10639
10515
10173
10393
Product Catalogue
Addressable Fire Alarm System
11.
12.
13.
14.
15.
16.
Addressable Fire Alarm Panel
Sounder
Smoke Detectors
Heat Detectors
Manual Call Points
Input / Output supervise module
Product Catalogue
F101
“FirePro’s complete
system solutions,
bespoke service
and superior
quality provide
a measurable
advantage.”
F102
Product Catalogue
Product Catalogue
F103
6 Koumandarias Str. Tonia Court, 6th Floor
PO Box 54080, 3720 Limassol, CY Europe
Tel.: +357 25 379 999 mail@firepro.com
www.firepro.com
FirePro Systems Ltd 2015-2016
F104
Product Catalogue
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising