rt125 quad tractor

rt125 quad tractor
RT125 QUAD
TRACTOR
RIDE-ON
RT125 QUAD TRACTOR
4
2
1
Three-speed, shift-on-the-fly ground
drive senses load conditions and
automatically adjusts for maximum
performance.
3
Dial control design gives the
operator precise control of
the ground drive speed and
attachments, maximizing
production.
Updated foot pedal design, easy-to-read
gauges and controls and a tilt steering
column provide operator with the controls
needed to get the job done efficiently.
Nothing lets you tackle more types of
terrain than the extremely productive
5
121-hp (90-kW) turbocharged Tier
4 Deutz© diesel engine and reliable
hydrostatic transmission keep the RT125
Quad running strong all day long.
and powerful RT125 Quad. Its massive
undercarriage, superior Quad Track
System and three-speed, shift-on-the-
Ergonomically designed rotating seat
and controls console rotates 120
degrees with the operator for easier,
more comfortable operation.
fly transmission combine to handle
whatever the jobsite throws at you. Its
newly redesigned operator’s station, with
comfort features including an ergonomic,
swivel operator seat and controls console,
and increased legroom, keeps you more
productive. With the RT125 Quad, nothing
slows you down.
6
7
11
Large selection of hydrostatic
attachments—trencher, plow,
earth saw, trencher/plow combo,
plus a choice of front-mount
utility backhoe or reel carrier.
10
Rear steering gives the RT125
Quad a tighter turn radius,
resulting in better jobsite
maneuverability and increased
versatility while digging.
9
Best-in-class ground clearance of
15.5 inches (394 mm) helps the
RT125 Quad be more productive
over rough terrain.
8
Standard tilt-frame
configuration helps you dig
a vertical trench on uneven
ground.
Innovative, long-lasting chevronpattern tracks provide superior
traction.
Heavy-duty, robust quad track frames
with each assembly weighing 1,500
lb (680.4 kg) helps provide a low
center of gravity for increased stability,
production and drawbar.
RT125 QUAD TRACTOR SPECIFICATIONS
RT125 QUAD TRACTOR SPECIFICATIONS
U.S.
U.S.
METRIC
POWER TRAIN
DIMENSIONS
Angle of approach
34°
Height (H1)
120 in
3.1 m
Length, transport
166 in
4.2 m
Width (W2)
89 in
2.3 m
Basic unit weight
15,300 lb
6940 kg
Wheelbase (L4)
79 in
2.1 m
Tread (W4)
71 in
1.8 m
Ground clearance, min
15.5 in
394 mm
POWER
METRIC
Ground drive pump capacity
47 gpm
180 l/min
Group
65
Ground drive pump relief pressure
6,300 psi
434 bar
SAE reserve capacity rating
165 min
Attachment pump capacity
45 gpm
170.5 l/min
Cold crank rating @ 0°F (-18°C)
875 amps
Attachment pump relief pressure
6,500 psi
448 bar
Auxiliary power outlet
12V, 10 amps
Auxiliary pump capacity
5.1 gpm
19.3 l/min
Auxiliary pump relief pressure
3,000 psi
206 bar
HYDRAULIC SYSTEM @ 2,300 RPM
Ground drive transmission
(Driving) powershift, (trenching)
powershift w/(crowd) hydrostatic
Differentials
Planetary front and rear w/rear
steering
Parking brake
Disc type, SAHR
Service brake
Disc type, foot operated hydrostatic
OPERATION
METRIC
BATTERY
Forward speed, max
7.2 mph
11.6 km/h
Operator
91 dBA sound pressure per ISO 6394
Reverse speed, max
4.7 mph
7.5 km/h
Exterior
109 dBA sound power per ISO 6393
Vehicle clearance circle
Deutz ® TCD3.6L4
Fuel
Diesel
Front steer only
42.4 ft
12.9 m
Cooling medium
Liquid
Front and rear steer
21.6 ft
6.6 m
Injection
Direct
Allowable tractor weight, max
27,200 lb
12338 kg
Aspiration
Turbocharged, charge air cooled
Front counterweight
1,300 lb
590 kg
Number of cylinders
4
Side counterweight, each
250 lb
114 kg
Displacement
221 in3
FLUID CAPACITIES
Fuel tank
38 gal
144 L
Engine oil
8.5 qt
8L
Hydraulic system
30 gal
114 L
Hydraulic reservoir
25 gal
95 L
Coolant
4.25 gal
16.1 L
BACKFILL BLADE
Bore
3.86 in
98 mm
Blade width
80 in
2030 mm
Stroke
4.72 in
120 mm
Blade height
17 in
430 mm
Gross power
121 hp
90 kW
Lift height, above ground
26 in
660 mm
Rated speed
2,300 rpm
Blade drop, below ground
10 in
254 mm
Emissions compliance
EPA Tier 4 final
Swing angle, max (left/right)
30°
Tilt angle, up/down
12°
EU Stage IV
U.S.
NOISE LEVEL
Engine
3.6 L
U.S.
METRIC
Specifications are general and subject to change without notice. If exact measurements are required,
equipment should be weighed and measured. Due to selected options, delivered equipment may not
necessary match that shown.
RT125 QUAD TRACTOR ATTACHMENTS
VP120Q (QUAD VIBRATORY PLOW)
RT125 QUAD TRACTOR ATTACHMENTS
PT120Q (QUAD TRENCHER PLOW)
BH120 (BACKHOE)
DIMENSIONS
DIMENSIONS
U.S.
METRIC
DIMENSIONS
U.S.
METRIC
RC30 (REEL CARRIER)
U.S.
METRIC
U.S.
METRIC
Transport height
122 in
3099 mm
DIMENSIONS
Reel diameter, max
96 in
2438 mm
Angle of departure, transport, no blade
47.5°
Angle of departure, transport, no blade
47.5°
Ground clearance
33 in
838 mm
Internal width
54 in
1372 mm
Angle of departure, transport, 24-inch blade
30°
Angle of departure, transport, 24-inch blade
30°
Digging depth, max.
108 in
2743 mm
Capacity
3,000 lb
1360 kg
Angle of departure, transport, 30-inch blade
24°
Angle of departure, transport, 30-inch blade
24°
Reach from swing pivot
158 in
4013 mm
Attachment length, fully lowered, no blade
97 in
2464 mm
Attachment length, fully lowered, no blade
97 in
2464 mm
Bucket width
12-24 in
300-610 mm
Attachment length, fully raised, no blade
78 in
1981 mm
Attachment length, fully raised, no blade
78 in
1981 mm
Backhoe weight without bucket
3,300 lb
1497 kg
Cover depth*
42 in
1067 mm
Cover depth*
42 in
1067 mm
Swing arc
180°
Attachment weight, without plow blade
2,600 lb
1180 kg
Attachment weight without boom, chain,
or plow blade
3,455 lb
1567 kg
CT120H (HYD. CENTERLINE TRENCHER)
DIMENSIONS
U.S.
Angle of departure
30°
Trench depth, maximum
93 in
Trench width, maximum
24 in
Transport height
METRIC
ST120H (HYD. SLIDING TRENCHER)
DIMENSIONS
U.S.
METRIC
Angle of departure
27°
2362 mm
Trench depth, maximum
90 in
2286 mm
610 mm
Trench width, maximum
24 in
610 mm
128 in
3251 mm
Transport length
134.5 in
3416 mm
Transport length
120 in
3048 mm
Attachment weight
2,350 lb
1066 kg
Attachment weight
1,750 lb
794 kg
*Suggested maximum. Plow blade used will be determined by job requirements and soil conditions.
FIND THE SUPPORT YOU NEED AT YOUR DITCH WITCH ® DEALER, INCLUDING:
DIGGING SYSTEMS
Replacing worn digging system components is essential to maintaining
maximum productivity from your trencher. See your dealer for genuine
Ditch Witch chain, specially manufactured headshaft sprockets and
digging teeth, which are designed to work together as a system to provide
unparalleled trenching performance.
PARTS
Tires, rubber tracks, o-ring kits, decals, paint, filters, hydraulic cylinder
kits, belts, and many other accessories and replacement parts are
available at your local Ditch Witch dealership, where you’ll also find
expert advice that comes from years of experience in the underground
construction industry.
SERVICE
Your Ditch Witch dealership offers professional service technicians who are
extensively trained in every aspect of Ditch Witch equipment maintenance
and repair. Ask a service representative about our Orange Armor® Planned
Maintenance program, a schedule of maintenance at factory-suggested
intervals that keeps your equipment in peak operating condition.
©2013 The Charles Machine Works, Inc.
©2016 The Charles Machine Works, Inc.
A Charles Machine Works Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising