TMSDC/DC-12-X Replacement Technical Note TMSDC

TMSDC/DC-12-X Replacement Technical Note TMSDC
TMSDC/DC-12-X Replacement Technical Note
Introduction
Unplug the existing cable that runs between the
Battery Saver and the BAT connector on the
modem board. Replace it with the supplied cable.
You’ve finished the installation.
This technical note shows you how to install a
replacement TMSDC/DC-12-X modem board.
Supplied cable
Installation Steps
1. Remove the new modem from its packaging.
2. Turn off power to the unit where you are replacing
the modem board.
3. On your existing modem board, look for the
connector labeled BAT in one of the corners:
Quick disconnects
7. If the unit does not have a Battery Saver, you need
both the supplied cable and the quick disconnects,
because terminals on the battery are smaller than
those on the Battery Saver.
a. On the supplied cable, cut off the red
connectors. Strip the ends of the wires, insert
them into the supplied quick disconnects, and
crimp them.
b. Remove the existing cable connecting the
battery to the BAT connector on the modem
board. Replace it with the supplied cable you
just modified. Installation is finished.
For Help
If you have questions about installing the TMSCD/CD12-X and you cannot find the answer you need in this
document, please contact Product Support.
800-TEK-OPTO (835-6786)
951-695-3080
Monday through Friday, 7 a.m. to 5 p.m.
Pacific Time
Fax:
951-695-3017
E-mail:
support@opto22.com
Website:
www.opto22.com
TECHNICAL NOTE
Phone:
Form 2102-140107
4. If the BAT connector is pluggable as shown in the
photo, you do not need the supplied cable and
connectors. Unplug the existing cable, replace the
modem board, plug the cable back in, and you’ve
finished the installation.
5. If the BAT connector
is a screw-type
connector, look for a
Battery Saver on the
unit. The Battery
Saver looks like this:
6. If the unit has a
Battery Saver, you
need the supplied
cable but not the
quick disconnects.
TMSDC/DC-12-X Replacement Technical Note
NOTE: Since the TMSDC/DC-12-X may replace a variety
of modem boards, it comes with a cable and quickdisconnect connectors that you may or may not need.
PAGE
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising