SFP (SheetFed PANTONE*) Blending Inks

SFP (SheetFed PANTONE*) Blending Inks
TECHNICAL
192
#
BULLETIN
S F P ( S h e e t Fed PA N TO N E*) Blending Inks
SFP Blending Ink formulations have been developed for application on a wide variety of
sheetfed printing equipment. SFP Blending Inks provides the following advantages:
v Quick setting/drying – speeds up the work-and-turn process, alle-
viating the incidence of offset blocking and reduces the levels of
spray powder required.
v Wide ink/water balance – SFP inks print cleaner at lower ink and
water settings compared to other inks.
v Excellent print quality – very good gloss and trap ability.
v User Friendly – SFP PANTONE* colors are suitable for aqueous
coating, UV coating, foil stamping and laminating. No high slip, high
melt wax is used. Pretesting is recommended because bleed resistant formulas may be required.
Note: When using aqueous coatings, UV coatings, or laminating over inks, there is the
potential for those inks to bleed and change appearance over time. Pigments that are at
risk are rhodamine red, purple, reflex blue, violet, warm red and fluorescent colors. Be
sure to specify a bleed-resistant formula for all print jobs to be laminated or requiring
either UV or aqueous coatings.
*PA N TO N E® is the property of Pantone, I n c.
G A N S I N K & SU P P LY C O M PA N Y
1441 BOYD STREET v LOS ANGELES v CA v 90033
(800) 421-6167 v (323) 264-2200 v FAX: (323) 264-2916
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising