Caseta Wireless Plug-In Dimmer Spec Submittal

Caseta Wireless Plug-In Dimmer Spec Submittal
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer
369805a 1 03.17.14
CasétaT Wireless Plug-In Lamp Dimmer
The CasétaT Wireless plug-in lamp dimmer controls
the lamp loads automatically through wireless
sensors and wireless remote controls providing a
system that delivers energy savings, convenience,
and ease of installation.
Receiving Device
CasétaT Wireless
Plug-In Lamp Dimmer
The CasétaT Wireless plug-in lamp dimmer uses
LutronR patented Clear ConnectR RF Technology,
which enables wireless communication with Radio
Powr SavrT sensors and PicoR wireless remotes for
total load control.
Transmitting Devices
Radio Powr SavrT Sensors
Ceiling-mounted
occupancy / vacancy
sensor
Wall-mounted
occupancy / vacancy
sensor
Features
•The CasétaT Wireless plug-in lamp dimmer provides
dimming of multiple load types and occupancy/
vacancy sensing.
PicoR wireless
remote
•LutronR patented Clear ConnectR RF Technology
works through walls and floors.
•Dual-receptacle design allows dimming of two
plug-in lamps (lamps controlled together).
•Plug-in lamp dimmer ideal for retrofit applications.
•Power failure memory: If power is interrupted, the
control will return to its previously set level prior to
interruption.
•Works with dimmable LEDs and CFLs, as well as
incandescent and halogen light bulbs.
•Plug-in lamp dimmer can be converted to a switch to
control non-dimmable loads.
Load Capacity
Model Number
PD-3PCL *
Description
Plug-In Lamp
Dimmer
CFL/LED Total Wattage
Incandescent/Halogen Total Wattage
0W
+
300 W
1 W – 33 W
+
200 W
34 W – 66 W
+
100 W
67 W – 100 W
+
0W
* See www.casetawireless.com/support for the latest list of compatible bulbs.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer
369805a 2 03.17.14
Specifications
Regulatory Approvals
•cULus Listed
•FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
•Industry Canada Certified
Power
Operating voltage:
120 V~ 50/60 Hz
Key Design Features
Plug-In Lamp Dimmer
•Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
•Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
•Controls always operate locally and do not require
system control.
•Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
•Green indicator LED.
System Communications and Capacity
•The plug-in lamp dimmer communicates with PicoR
wireless remotes and Radio Power SavrT sensors
through radio frequency (RF).
•The plug-in lamp dimmer must be located within 60 ft
(18 m) line of sight or 30 ft (9 m) through walls, of PicoR
wireless remotes and Radio Power SavrT sensors.
•Up to ten transmitting devices may be associated to
each plug-in lamp dimmer.
Environment
•Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing.
Indoor use only.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer
369805a 3 03.17.14
Operation
Plug-In Lamp Dimmer
Indicator LED
On
Raise
Lower
Off
Dimensions
Side View
Front View
31⁄8 in
(79.4 mm)
23⁄16 in
(55.6 mm)
13⁄16 in
(30.2 mm)
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising