horn tweeter loudspeaker eapt 50

horn tweeter loudspeaker eapt 50
HORN TWEETER LOUDSPEAKER EAPT 50
TECHNICAL DATA
Rated impedance
Voice coil resistance
Rated frequency range
Resonance frequency
Recommended crossover frequency
Power handling capacity,P1/P2 *
measured with filter
Max. Power **
Sensitivity
Flux density
Energy in air gap
Air - gap
Voice coil height
Magnet
- material
- dimensions
- mass
Mass of loudspeaker
The loudspeaker has flexible wire leads and a capton voice coil former
andan air gap with ferrofluid.
* P1 = 100 W (on crossover input)
P2 = 8 W (on crossover output - on loudspeaker)
** 200 W (on crossover input)
16 W (on crossover output - on loudspeaker)
Crossover - Signal - pink noise to IEC 268-1
8
6,3
3 to 20
4,5
kHz
kHz
kHz
100/8
200/16
101
1,29
119,5
25/3/0,745
1,8
W
W
dB
T
mJ
mm
mm
ferrite
70/32/15
0,23
0,8
mm
kg
kg
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising