mini energy dimmer

mini energy dimmer
INTRODUCTION
REGULATIONS
EMC 2004/108/EC, R&TTE 1995/5/EC, LVD
2006/95/EC, FCC PART 15
1 year
WARRANTY
MINI
ENERGY DIMMER
QUICK INSTALLATION GUIDE
v1.0
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks. All
other product names mentioned herein may be trademarks or
registered trademarks of their respective companies.
Zipato Mini Energy Dimmer provides variable indoor lightning,
creating pleasant ambience in your home while helping you
reduce overall energy consumption. This Z-Wave enabled module
can be set in most existing in-wall switches where it can be used
to control connected appliances, with Zipato home automation
controllers, Z-Wave remotes or module’s built-in push button.
It supports basic command class, which can report immediate
voltage, current, watt, and energy consumption. It also can act as
a repeater in the Z-Wave network. This product can be included
and operated in any Z-Wave network with other Z-Wave certified
devices from any other manufacturers.
MODELS AND FREQUENCIES
AUSTRALIA - AU version
EUROPE - EU version
INDIA - IN version
RUSSIA - RU version
UNITED STATES - US version
mh-p210.au / 921.42 MHz
mh-p210.eu / 868.42 MHz
mh-p210.in / 865.20 MHz
mh-p210.ru / 869.02 MHz
mh-p210.us / 908.42MHz
2
OVERVIEW
Caution:
Cut off power supply at circuit breaker or fuse before installation to
avoid fire, shock or death!
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
When installing a wall plate, the distance between the cover’s
fixing brackets or screws and the connections of the flushmounted MicroModule Switch Double must be at least 4 mm once
installed. If the distance is less than 4 mm, a deeper installation
box must be used. The fixing brackets or screws of the cover must
not press against the housing. Only insulated tools may be used for
operation on the device, e.g. an insulated phase tester.
CAUTION
The connected devices and the flush-mounted receiver can
become damaged if devices are operated that do not correspond
to the technical specifications (see technical data).
make your home smart
MOUNTING IN-WALL BOX
RESTORING POWER
Restore power at circuit breaker or fuse.
Installation is complete.
emove the wall switch cover plate.
R
Disconnect both wires from the wall switch.
OPERATION
WIRING
(standard strip length: 6-7mm)
Indication Led
PACKAGE CONTENT
1PC
Mini Energy Dimmer
1PC
Quick Installation Guide
On/Off/Program
button
FEATURES
lim, compact Z-Wave incandescent dimmer provides variable
S
indoor lightning, switches your lightning equipment and reports
their energy consumption.
Designed to dim most fluorescent, tungsten, halogen, sodium
and leading edge lights
Fits into most existing in-wall switches
Resistive load 1x500W @ 220VAC, 1x300W at 120VAC
Zero-crossing switch
Reports immediate voltage, current and energy consumption
Can act as a repeater in any Z-Wave network
Very low power consumption
Easy installation
Power
N L
Load
N L
TURNING ON/OFF/DIMMING THE MINI ENERGY
DIMMER
TECHNICAL SPECIFICATION
www.zipato.com
1 Set the controller into INCLUSION mode. Follow the instructions
provided by the controller manufacturer.
2 Press the ON/OFF/PROGRAM button on the Mini Energy Dimmer,
or toggle/press the external switch/button 6 times in quick
succession (within approx 2sec).
Note: If the inclusion is successful, the Mini Energy Dimmer
INDICATION LED will be solid on or off depending on switch’s state.
If not, INDICATION LED will blink slowly.
1 Set the controller into EXCLUSION mode. Follow the instructions
provided by the controller manufacturer.
2 Press the ON/OFF/PROGRAM button on the Mini Energy Dimmer,
or toggle/press the external switch/button 6 times in quick
succession (within approx 2sec).
Note: If the exclusion is successful, the Mini Energy Dimmer
INDICATION LED will blink slowly. If not, INDICATION LED will be
solid on or off depending on switch’s state.
AC Power
SPECIFICATION
PROTOCOL
Z-Wave 400
LOAD TYPE
Incandescent
POWER SUPPLY (EU, AU, IN, RU)
85V - 260VAC, 50Hz
POWER SUPPLY (US)
85 - 260VAC, 60Hz
MAX OUTPUT
2A
OPERATION TEMPERATURE
0°C ~ 60°C
RANGE
Minimum 30m indoor / 70m outdoor
WEIGHT
54g
DIMENSIONS
50mm x 50mm x 20mm
PACKAGE WEIGHT
81g
PACKAGE DIMENSIONS
90mm x 80mm x 35mm
INCLUDING THE MINI ENERGY DIMMER INTO YOUR
NETWORK
EXCLUDING THE MINI ENERGY DIMMER INTO YOUR
NETWORK
GND 3V
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
The device has no basic insulation and must therefore be installed
in a way that protects against accidental contact.
Line (Hot)
Neutral
Load
Mount wall switch and cover plate back to the in-wall box.
Switch
RISK OF ELECTROCUTION
All work on the device should only be carried out by trained and
skilled electricians. Observe the country-specific regulations.
1
3
GND 3V
DANGER
3
2
Switch
TAKE CARE OF YOUR SAFETY
Display extreme caution when using ladders or steps, please
follow manufacturer’s instructions. Be careful when using hand
and power tools and follow the manufacturer’s guidelines when
using them. Take care that the correct tools are used. Wear
goggles or protective clothing where required.
1
PREPARING
Although Zipato has attempted to ensure the accuracy of the
content of this manual, it is possible that this document may
contain technical inaccuracies, typographical, or other errors.
Zipato assumes no liability for any error in this publication, and for
damages, whether direct, indirect, incidental, and consequential
or otherwise, that may result from such error, including, but not
limited to loss of data or profits. Zipato provides this publication
“as is” without warranty of any kind, either express or implied,
including, but not limited to implied warranties of merchantability
or fitness for a particular purpose. The published information in
the manual is subject to change without notice. Zipato reserves
the right to make changes in the product design, layout, and driver
revisions without notification to its users. This version of the
Installation guide supersedes all previous versions.
When operated according to manufacturer instructions, the
product complies with all applicable CE harmonised standards
from EMC Directive 2004/108/EC and Part 15 of the FCC Rules.
The connections conducting HF signals must not be damaged or
altered in any way by the user.
4
INSTALLATION AND OPERATION
NOTICE
ELECTROMAGNETIC COMPATIBILITY
Connect Neutral Line to “Power N”.
Connect Load wire to “Load L”.
External switch connection: Connect both wires with two
terminals of “Switch”.
Note:“3V”and“GND”will only be used with MCOHome touch panel.
And the terminals are not isolated from main power (L, N), DO NOT
touch them with bare hands.
Power
N L
Load
N L
AC Power
Connect Hot Line to “Power L”.
make your home smart
The Mini Energy Dimmer can be controlled by:
Toggling external switch/Button.
Pressing the ON/OFF/PROGRAM button on the Mini Energy
Dimmer. To press the button will toggle the power flow.
Sending commands through controller or gateway.(the
command classes which support this function are Basic
Command Class, Multilevel Switch Command Class, and Scene
Activation Command Class.
CHANGING EXTERNAL CONTROL MODE
The external control mode can be configured by: (the default control
mode of this module is external switch).
Sending commands through controller or gateway (the command
class which supports this function is Configuration Command
Class)
www.zipato.com 01
PARAMETER NUMBER
0x01
SIZE
1 byte
DEFAULT VALUE
0x00
CONFIGURATION VALUE
0x00: Switch(2 state switch
mode
0x01: Button( Momentary
button mode)
ressing the ON/OFF/PROGRAM button 6 times in quick
P
succession (within approx 2sec).
SETTING ASSOCIATION GROUP
The module supports 2 association groups. The 1st group can
support 5 association nodes. When set unsolicited report, the 1st
group will send data to its associated devices initiatively. See details
in “Monitoring Energy Consumption”.
The 2nd group is used for reporting devices’ state to the controller
if any changes happen. This group supports one node, which
defaults to controller node.
The “ASSOCIATION_SET” in “COMMAND_CLASS_ASSOCIATION”
command class is used to set Grouping identifier and Node ID
of association devices. Using “ASSOCIATION_GET” to get the
association device’s Node ID, and “ASSOCIATION_REMOVE” to
remove the association device’s Node ID.
COMMAND CLASSES
COMMAND_CLASS_
ASSOCIATION_V1
COMMAND NAME
ASSOCIATION_SET
GROUPING IDENTIFIER
0x01 / 0x02
NODE ID
Node ID that need to be included
MONITORING ENERGY CONSUMPTION
When requested by controller or gateway, the Mini Energy
Dimmer will report immediate voltage, current, power, and energy
consumption (the command classes which support this function is
Meter Command Class). When set unsolicited report, the module will
send data to association group 1 at regular time.
PARAMETER NUMBER
0x02
SIZE
1 byte
DEFAULT VALUE
0x00
CONFIGURATION VALUE
Bit 0: KWH Report
Bit 1: Voltage Report
Bit 2: Current Report
Bit 3: Watt Report
(Bit Set to 1: enable 0:disable)
The interval time can be set as follows:
PARAMETER NUMBER
0x03
SIZE
2 byte
DEFAULT VALUE
0x0258 (10 minute)
CONFIGURATION VALUE
0~65535 sec
SETTING & ACTIVATING SCENE
The module can set and activate 255 scene IDs by using gateway
and scene controller. The “SCENE_ACTUATOR_CONF_SET” in
“COMMAND_CALSS_SCENE_ACTUATOR_CONF” is used to set
scene, and “SCENE_ACTIVATION_SET” in “COMMAND_CLASS_
SENE_ACTIVATION” is used to activate scene. Please refer to
instructions provided by controller manufacturer for details.
RESTORING FACTORY SETTINGS
The default configuration can be restored by:
Sending commands through controller or gateway (the command
make your home smart
classes which support this function is Configuration Command
Class). The parameter are as follows:
PARAMETER NUMBER
0xFF
SIZE
1 byte
DEFAULT VALUE
N/A
CONFIGURATION VALUE
0x55
Set 0xFF as 0x55 will restore Factory Settings.
Pressing and Holding the ON/OFF/PROGRAM button for 15s.
Note: If the Factory Settings is restored successfully, INDICATION
LED will blink quickly and then become slower.
TROUBLESHOOTING
Having trouble installing your new product?
Zipato’s website contains the latest user documentation and
software updates for Zipato products and services:
www.zipato.com
You can also find answers in the Zipato Community at:
community.zipato.com
Zipato Support: support@zipato.com
LIMITED PRODUCT WARRANTY
GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutory
rights as a consumer.
The Limited Product Warranty set forth below is given by Tri plus
grupa d.o.o. (Europe) (herein referred to as “ZIPATO”). This Limited
Product Warranty is only effective upon presentation of the proof
of purchase. Upon further request by ZIPATO, this warranty card
has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY,
ZIPATO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. ZIPATO EXPRESSLY
DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED
BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY
PERIOD. TO THE EXTENT ALLOWED BY LOCAL LAW, THE
REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S
SOLE AND EXCLUSIVE REMEDIES AGAINST ZIPATO. THEY DO
NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU HAVE
AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM.
IN NO EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR
INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING
LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. HOWEVER, NOTHING IN THIS
AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU (I) IN THE EVENT
OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ZIPATO’S NEGLIGENCE, OR (II) TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART
OF ZIPATO, OR (III) TO THE EXTENT ARISING UNDER PART 1
OF THE CONSUMER PROTECTION ACT 1987 OF THE UNITED
KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW: (1) A
DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR
(3) LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES,
SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY
MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO
COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR
www.zipato.com
COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware
products (collectively referred to as “ZIPATO Hardware Products”)
sold by ZIPATO (Europe), its European subsidiaries, affiliates,
authorized resellers, or country distributors (collectively referred to
as “ZIPATO Resellers”) with this Limited Product Warranty.
The term “ZIPATO Hardware Product” is limited to the hardware
components and all its internal components including firmware.
The term “ZIPATO Hardware Product” DOES NOT include any
software applications or programs.
EOGRAPHICAL SCOPE OF THE LIMITED
G
PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products
sold by Zipato Resellers in all countries listed at the beginning of
this document under the heading “Countries in which this ZIPATO
Limited Product Warranty applies”. The Limited Product Warranty
will be honored in any country where ZIPATO or its authorized service
providers offer warranty service subject to the terms and conditions
set forth in this Limited Product Warranty. However, warranty
service availability and response times may vary from country to
country and may also be subject to registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under
normal use are free from material defects in materials and
workmanship during the Limited Product Warranty Period set
forth below (“Limited Product Warranty Period”), if the product is
used and serviced in accordance with the user manual and other
documentation provided to the purchaser at the time of purchase
(or as amended from time to time).
ZIPATO does not warrant that the products will operate
uninterrupted or error-free or that all deficiencies, errors, defects
or non-conformities will be corrected.
This warranty shall not apply to problems resulting from: (a)
unauthorized alterations or attachments; (b) negligence, abuse
or misuse, including failure to operate the product in accordance
with specifications or interface requirements; (c) improper
handling; (d) failure of goods or services not obtained from ZIPATO
or not subject to a then-effective ZIPATO warranty or maintenance
agreement; (e) improper use or storage; or (f) fire, water, acts of
God or other catastrophic events. This warranty shall also not
apply to any particular product if any ZIPATO serial number has
been removed or defaced in any way.
ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A
RESULT OF YOUR FAILURE TO FOLLOW THE INSTRUCTIONS FOR
THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of
purchase from ZIPATO. Your dated sales or delivery receipt,
showing the date of purchase of the product, is your proof of the
purchase date. You may be required to provide proof of purchase
as a condition of receiving warranty service. You are entitled to
warranty service according to the terms and conditions of this
document if a repair to your ZIPATO branded hardware is required
within the Limited Product Warranty Period.
[Other than in respect of products for domestic use (in particular
those listed in the first and last boxes in the table below), this
Limited Product Warranty extends only to the original end user
purchaser of this ZIPATO Hardware Product and is not transferable
to anyone who obtains ownership of the ZIPATO Hardware Product
from the original end-user purchaser.
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE
Mini Energy Dimmer
PRODUCT WARRANTY
PERIOD
One (1) year
IMPORTANT
The content of “Product Type” listed above is subject to change;
make your home smart
please refer to the www.zipato.com for latest update.
ERFORMANCE OF THE LIMITED
P
PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to
repair or replace any defective Zipato Hardware Product free of
charge provided it is returned to an Authorized ZIPATO Service
Centre during the Limited Warranty Period. Such repair or
replacement will be rendered by ZIPATO at an Authorized ZIPATO
Service Centre. All component parts or hardware products that
are replaced under this Limited Product Warranty become the
property of ZIPATO. The replacement part or product takes on the
remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make,
model or part; ZIPATO may in its discretion replace the defective
product (or any part thereof) with any reconditioned equivalent (or
superior) product in all material respects to the defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA
TEL +385 (0)1 4004 404
FAX +385 (0)1 4004 405
DECLARATION OF CONFORMITY
The manufacturer Tri plus grupa d.o.o declares under our sole
responsibility that the product:
Marketing model: Mini Energy Dimmer
Regulatory model: mh-p210
Trade/Brand name: Zipato
is in conformity with the Low Voltage Directive 2006/95/EC, EMC
Directive 2004/108/ECand R&TTE Directive 1995/5/EC and carries
the CE marking accordingly.
The following harmonized standards were applied:
R&TTE (1995/5/EC)
EN 300 220-1: V2.4.1
EN 300 220-2: V2.4.1
EMC (2004/108/EC)
EN 301 489-1: V1.9.2
EN 301 489-3: V1.6.1
LVD (2006/95/EC)
EN 60669-2-1:2004 + A1:2009 + A12:2010 used in conjunction with
EN 60669-1:1999 + A1:2002 + A2:2008
Changes or modifications not expressly approved by Tri plus grupa
d.o.o. for compliance could void the user’s authority to operate the
equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
1 | this device may not cause harmful interference, and
2 | this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Changes or modifications not expressly approved by Zipato
for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
www.zipato.com 02
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DISPOSING AND RECYCLING YOUR PRODUCT
When it reaches end of life, dispose of the product according to
your local enviromental laws, guidelines and regulations.
This symbol on the product or packaging means that according
to local laws and regulations needs to be disposed of separately
from household waste. Once this product has reached the end
of its life, please take it to a collection point (recycle facilites)
designated by your local authorities, some will accept your
product for free or simply drop it off at your Zipato re-seller store.
By recycling the product and its packaging in this manner you
help to conserve the environment and protect human health. At
Zipato, we understand and are committed to reducing any impact
our operations and products may have on the environment. To
minimize this impact Zipato designs and builds its products to be
as environmentally friendly as possible, by using recyclable, low
toxic materials in both products and packaging.
COPYRIGHT
© 2015 Tri plus grupa d.o.o. All Rights Reserved.
No part of this manual may be reproduced or transmitted in any form
without the expressed, written permission of Tri plus grupa d.o.o.
make your home smart
www.zipato.com
make your home smart
www.zipato.com 03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising