incandescent lampholders - Electric Supplies Online

incandescent lampholders - Electric Supplies Online
INCANDESCENT
LAMPHOLDERS
Cat. #
Approvals
Job
Type
Outdoor Lighting
103-7 / 308 / 309 / 306 / 103
APPLICATIONS
• Ideal for a wide variety of industrial and commercial applications as accent and general
lighting.
SPECIFICATIONS 308/309
• Die cast bullet series 175 watt maximum.
• Open 308 Series is used indoors or aimed down
outdoors. Provides shielding of PAR 38 lamps.
• 309 Series has extension ring and weathertight
lens. Improves shielding and allows universal
aiming in wet locations.
• NEW! 10 watt 120-277V LED unit available
saves energy and maintenance - Bronze finish.
50,000 hour typical life. 3,500K/253 lumens.
• Multiple powder paint finishes.
SPECIFICATIONS 306
• Cast aluminum housing with decorative “visor”
styling. Designed for maximum heat dissipation
for long lamp life.
• Lens is thermal shock and impact resistant and
mounted to cast door for easy service.
• High temperature silicone gaskets seal housing
and cushion lamp for all-weather protection.
• Universal adjustable 1/2" NSPM threaded
mounting arm with lock nut. Relamp without
disturbing original aiming. Floating-end prong
porcelain socket.
• Factory wired for fast, easy installation.
• Gray powder paint finish.
LISTINGS
• CSA certified for indoor and outdoor use.
Suitable for wet locations.
308
SPECIFICATIONS 103-7
• Cast aluminum lamp housing with 1/2" NPSM male
swivel mounting arm. For all-weather protection.
• Universal aiming with PAR 38 lamps.
• Factory wired for fast, easy installation.
• Gray, green and black powder paint finishes.
LISTINGS
• Listed for wet location.
SPECIFICATIONS 103
• Industrial grade with silicone “O” ring gasket for
150 watt maximum PAR or R lamps.
• Large 1/2" knuckle provides firm mounting.
• Natural aluminum finish.
SPECIFICATIONS 101B
• Economy PAR lampholder with front EPDM
gasket for up aiming capability in wet locations.
• 150W max., bronze finish.
306
309
A
A
C
B
B
B
C
A
B
A
C
A
5"
81/4"
53/8"
127 mm 210 mm 136 mm
B
C
A
5"
97/8"
53/8"
127 mm 251 mm 136 mm
103-7
B
81/8"
97/8"
206 mm 251 mm
103
101-B
B
A
B
C
A
C
D
E
B
D
A
C
A
B
C
D
E
15/16"
6"
53/8"
41/16" 37/16"
33 mm 152 mm 136 mm 103 mm 87 mm
A
B
C
D
413/16"
4"
37/16" 23/8"
122 mm 102 mm 87 mm 60 mm
A
B
C
21/2" 31/2" 13/4"
64 mm 89 mm 44 mm
ORDERING INFORMATION
see back
HUBBELL OUTDOOR LIGHTING
SHEET # LAMPHOLDERS-SPEC3/09
ORDERING INFORMATION
BELL LAMPHOLDER FLOOD 103-7 SERIES
Catalog Number
Description
Gasket
Finish
103-7
103-71
103-72
103-73
103-74
Swivel Knuckle Mount, 6" leads
Swivel Knuckle Mount, 6" leads
Swivel Knuckle Mount, 6" leads
Swivel Knuckle Mount, 6" leads
Swivel Knuckle Mount, 6" leads
Silicone
Silicone
Silicone
Silicone
Silicone
Gray
Bronze
Black
Garden Green
White
ACCESSORIES 103-7
Weight
lbs kg
1.25 .6
1.25 .6
1.25 .6
1.25 .6
1.25 .6
(order as separate part #)
Catalog Number
Description
10481
1052-C
1324
1031-3
Lens Holder attaches to outside of lampholder, 103-7 Series only
Clear Lens, must order 1048 lens holder
Zinc-Plated Wire Guard, for PAR 38 lamps only
Ground Spike with integral splice box & 6' #18/3 cord set & 1/2" NPSM hub
Weight
lbs kg
.125 .06
.125 .06
.5
.2
2.0 .9
NOTE: Use as low wattage lamp as possible with colored lenses. Colored lenses are tempered but cannot be guaranteed in up aiming
applications due to cold rain variables.
1 1048 lens holder cannot be used with PAR 38. When using lenses, R-30 or A-21 lamp must be used.
PAR 56 LAMPHOLDER FLOOD 306
BULLET LAMPHOLDER FLOOD 308/309 SERIES
Catalog Number
Description
Finish
DAMP LOCATION LISTED - AIM DOWN OUTDOORS1
Gray
81/4" long
308-M
Garden Green
81/4" long
308-13-M
Matte Black
81/4" long
308-14-M
Verdi
81/4" long
308-M51-M
WET LOCATION LISTED - UNIVERSAL AIMING 2
Gray
97/8" long
309-ML
Garden Green
97/8" long
309-13-ML
Matte Black
97/8" long
309-14-ML
Verdi
97/8" long
309-VG-ML
Dark Bronze
97/8" long
309-M51-ML
White
97/8" long
309-M54-ML
Weight
lbs kg
2.25
2.25
2.25
2.25
1.0
1.0
1.0
1.0
3
3
3
3
3
3
1.4
1.4
1.4
1.4
1.4
1.4
Catalog Number
Description
306
1/2" Swivel Knuckle mount, 12" leads,
hinged door and lens, gray finish
Weight
lbs
kg
3.375 1.7
NOTE: PAR 56 lampholders for 300 watt (maximum) incandescent or 500 watt quartz.
NOTE: Lamp not included.
PAR 38 LAMPHOLDER 103
Catalog Number Description
103 1
Max. Watts
Swivel Knuckle Mount,
150
Gasket
Finish
Weight
lbs kg
Silicone Nat. Aluminum .75 .3
1 Large knuckle construction for greater strength.
NOTE: Lamp not included. Infrared or heat lamps not recommended.
1 Use medium base PAR 38 lamps or smaller, 150 watt maximum.
2 Use PAR 38 or R40 lamps, 175 watt maximum.
30910LEDML
1
LED - WET LOCATION - UNIVERSAL AIMING
97/8" long
Bronze
PAR 38 LAMPHOLDER 101B
5
2.2
1 3500K color temperature - 10watts, 253 lumens, 5H x 5V.
Catalog Number Description
101-B
Max. Watts
Swivel Knuckle Mount,
150
Gasket
Finish
EPDM
Bronze
Weight
lbs kg
.58 .26
NOTE: Lamp not included. Infrared or heat lamps not recommended.
(order as separate part #)
ACCESSORIES 309
Catalog Number
Description
1056-C
1324
1338
309-S
Clear Lens and retaining ring
Zinc-Plated Wire Guard
Louver, matte black finish
Shield, 7" X 45°, black
1324
1338
309-S
Weight
lbs kg
.5
.2
.25 .1
.5
.2
1.7
.8
1031-3
NM-BC
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • PHONE: 864-678-1000
For more information visit our web site: www.hubbell-ltg.com
Outdoor Lighting
Copyright © 2009 HUBBELL LIGHTING All Rights Reserved LAMPHOLDERS-SPEC3/09 Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising