WebFOCUS Business User Edition Release Guide Release 8.2

WebFOCUS Business User Edition Release Guide Release 8.2
WebFOCUS Business User Edition
Release Guide
Release 8.2 Version 01
November 04, 2016
Active Technologies, EDA, EDA/SQL, FIDEL, FOCUS, Information Builders, the Information Builders logo, iWay, iWay
Software, Parlay, PC/FOCUS, RStat, Table Talk, Web390, WebFOCUS, WebFOCUS Active Technologies, and WebFOCUS
Magnify are registered trademarks, and DataMigrator and Hyperstage are trademarks of Information Builders, Inc.
Adobe, the Adobe logo, Acrobat, Adobe Reader, Flash, Adobe Flash Builder, Flex, and PostScript are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Due to the nature of this material, this document refers to numerous hardware and software products by their
trademarks. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their
respective companies. It is not this publisher's intent to use any of these names generically. The reader is therefore
cautioned to investigate all claimed trademark rights before using any of these names other than to refer to the product
described.
Copyright © 2016, by Information Builders, Inc. and iWay Software. All rights reserved. Patent Pending. This manual, or
parts thereof, may not be reproduced in any form without the written permission of Information Builders, Inc.
Contents
1. WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements . . . . . . . . 5
WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements List . . . . . . . . . . . . . . .6
Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Upgrade Installations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Email Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Password Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Data Management and Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adapter for Apache Phoenix for HBase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adapter for Apache Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adapter for Google BigQuery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
New Upload Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Data Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Navigation and Analytics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Dynamic Navigation: Auto Drill and Auto Linking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Responsive Autoprompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Parameter-Driven Charts and Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Business User Edition Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User Experience Improvements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sample Content Generator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Visibility Into Shared Application Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Release 8.2 Version 01 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
InfoAssist+ Auto Drill Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
WebFOCUS Business User Edition Release Guide
3
Contents
Hyperstage Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Learn More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adapter Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. WebFOCUS Business User Edition Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Business User Edition Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
InfoAssist+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
National Language Support (NLS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ReportCaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Responsive Autoprompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4
Information Builders
Chapter
1
WebFOCUS Business User Edition
8.2.01 Key Features and
Enhancements
The WebFOCUS Business User Edition (BUE) is intended for business users and analysts
that want to generate and share reports, charts, documents, and visualizations. It is also
intended for those who want to conduct data discovery to explore trends, patterns, and
opportunities. It is a WebFOCUS business intelligence (BI) and analytics platform that
enables reporting and analytic capabilities, which can be delivered to users inside and
outside of your organization.
WebFOCUS Business User Edition is a self-service analytics solution for groups of
business users and analysts. It is not only a web-based environment, but also a multiuser, server-based product designed with a user interface that is oriented toward nontechnical users.
This topic describes the Key Features and enhancements for WebFOCUS Business User
Edition (BUE) Release 8.2.01.
In this chapter:
WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements List
Installation and Configuration
Data Management and Preparation
Navigation and Analytics
Business User Edition Portal
Visibility Into Shared Application Directory
Release 8.2 Version 01 Enhancements
WebFOCUS Business User Edition Release Guide
5
WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements List
WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements List
Use the table below for descriptions on the Key Features and enhancements for WebFOCUS
BUE 8.2.01.
Category
Key Feature
Installation and Configuration
Upgrade Installations on page 7.
Email Configuration on page 7.
Password Validation on page 7.
Data Management and
Preparation
Adapter for Apache Phoenix for HBase on page 8.
Adapter for Apache Drill on page 8.
Adapter for Google BigQuery on page 8.
New Upload Wizard on page 8.
Data Preparation on page 9.
Navigation and Analytics
Dynamic Navigation: Auto Drill and Auto Linking on page 9.
Responsive Autoprompt on page 10.
Parameter-Driven Charts and Reports on page 10.
Business User Edition Portal
User Experience Improvements on page 11.
Sample Content Generator on page 12.
Visibility Into Shared Application Directory on page 12.
8.2.01 Enhancements
InfoAssist+ Auto Drill Properties on page 13.
Hyperstage Adapter on page 13.
Adapter Connections on page 13.
Installation and Configuration
The WebFOCUS BUE Release 8.2 Version 01 key features for installation are:
Upgrade installation
6
Information Builders
1. WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements
Email configuration
Password validation
Upgrade Installations
Support for upgrade installations from WebFOCUS Business User Edition Release 8.2 Version
01 is now available. This will upgrade the binaries to Release 8.2.01, while preserving your
existing content.
Learn More
For more information, see the Installation topic, under WebFOCUS Business User Edition
8.2.01, in the WebFOCUS BUE Technical Library, Release 8.2.01.
Email Configuration
Email configuration options have been added to configure a mail server for ReportCaster
distribution services.
Learn More
For more information, see the Installation topic, under WebFOCUS Business User Edition
8.2.01, in the WebFOCUS BUE Technical Library, Release 8.2.01.
Password Validation
Password validation for the manager user ID has been added to prevent special characters
from being used.
Learn More
For more information, see the Installation topic, under WebFOCUS Business User Edition
8.2.01, in the WebFOCUS BUE Technical Library, Release 8.2.01.
Data Management and Preparation
The WebFOCUS BUE Release 8.2 Version 01 Key Features for data management and
preparation are:
Apache Phoenix Adapter
Apache Drill Adapter
Adapter for Google BigQuery
WebFOCUS Business User Edition Release Guide
7
Data Management and Preparation
New Upload Wizard
Data Preparation
Adapter for Apache Phoenix for HBase
Apache Phoenix provides SQL read/write access to Apache HBase (and MapR-DB), a NoSQL
database distributed with Hadoop.
For full functionality, this adapter requires Phoenix release 4.5.0 or later.
Adapter for Apache Drill
Apache Drill is a query engine for data managed by Hadoop in HDFS or Mapr-FS, a variety of
NoSQL databases including HBase and MapR-DB, and MongoDB, and other data sources. Drill
can use Hive metadata or derive metadata from self-describing data files.
Adapter for Google BigQuery
The Adapter for Google BigQuery is new in this release and can be found under SQL Adapters
on the Web Console. The adapter is used to load data into the Google BigQuery environment
and report against the information that is residing in the Google BigQuery environment.
BigQuery provides a REST-based API that requires all requests to be authorized by an
authenticated user or a service account.
New Upload Wizard
The new Upload wizard allows you to preview and change the uploaded spreadsheets and
delimited data files before you upload them to the repository. The tool supports multiple sheet
upload. After the initial file selection is complete, the wizard shows you the default breakdown
of your data into measures, dimensions, and hierarchies. At this point, you can perform many
advanced data preparation techniques, such as:
Data grouping
Joining multiple fact tables into a cluster
Geo role determination
Geo encoding
Data profiling
Pivoting with immediate preview/undo
Creating and editing measure and dimension fields, dimension hierarchies, and attributes
8
Information Builders
1. WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements
The full ribbon based interface of the new Upload wizard makes the process of preparing your
data easy and intuitive. You can configure the view options to customize your Upload wizard UI
and make it suit your needs. Once your synonym is complete, you can upload it to the
repository, append it to an existing synonym, or save it as a template to allow repeated
transformations.
Learn More
For more information on the new Upload wizard, see the Uploading and Appending
Spreadsheets topic, under Working With Data, in the WebFOCUS BUE Technical Library,
Release 8.2.01.
Data Preparation
The Upload wizard and Connect to Data wizard offer a suite of data wrangling options, which
are designed to help you prepare your data for future analytics. With these data wrangling
tools, you can assess your data for validity and consistency, weed out errors, and enhance
accuracy and uniformity of your data. Thanks to these options, you can spend less time
collecting and cleaning data, and more time working on analysis and reporting.
Learn More
For more information on the new Upload wizard, see the Uploading and Appending
Spreadsheets topic, under Working With Data, in the WebFOCUS BUE Technical Library,
Release 8.2.01.
Navigation and Analytics
The WebFOCUS BUE Release 8.2.01 Key Features for navigation and analytics are:
Dynamic Navigation: Auto Drill and Auto Linking
Responsive Autoprompt
Parameter-driven Charts and Reports
Dynamic Navigation: Auto Drill and Auto Linking
Auto Drill and Auto Linking enable you to navigate your data and streamline the effort needed
to create drill downs. Auto Drill enables you to navigate through different levels within the
dimension hierarchy of your data source. This allows you to review underlying data for a
particular area, and move through the structure of your data source based on your
informational needs. All that is required is a hierarchical data source.
WebFOCUS Business User Edition Release Guide
9
Navigation and Analytics
Auto Linking makes it easy to connect reports and charts in your development environment,
expanding the reporting capabilities of your organization. Using Auto Linking, you can
dynamically link HTML reports, active reports, and HTML5 charts with a single report or chart of
any format, based on their common sort (BY) fields and parameters referenced in any filters. It
is this commonality that dynamically links content in your WebFOCUS BUE repository, allowing
you to discover new possibilities in your data, and explore new relationships within your
reporting enterprise. In addition, Auto Linking saves development time and effort, because
drilldowns do not need to be manually created and maintained.
Auto Drill and Auto Linking give you the advantage of navigating your data dynamically by simply
selecting these report options. These features broaden your analytical insights, giving you
access to different views of your data through these dynamic links.
Learn More
For more information about these features, see the Using Auto Drill and Using the Auto Linking
Feature to Link Content topics, under Customizing Content, in the WebFOCUS BUE Technical
Library, Release 8.2.01.
Responsive Autoprompt
The WebFOCUS BUE Autoprompting facility dynamically creates a launch page that prompts
users for the parameters (amper variables) necessary to execute a procedure (FEX). The
parameter values entered or selected by users on the Autoprompt launch page can be used as
field values, or as the objects of the display and sort commands in the report request.
Release 8.2.01 introduces a new Responsive Autoprompt facility that provides a modern user
interface design with responsive mobile support, chaining of dynamic lists for fields in a
dimension hierarchy, and a calendar control for simple filters to select a date for a date field of
YYMD format with modifiers. The date format must have all components (year, month, day) and
not be a Date-Time field format.
Parameter-Driven Charts and Reports
When creating reports, charts, or documents, you can add parameters to enable options for
selection at run-time. This gives you the full advantage of reviewing and comparing your data
using convenient drop-down lists that help you quickly gain insight into your data.
You add parameters by right-clicking on any field container, except Multi-graph. Simply click
New Parameter. This creates a new, unique Parameter field container, into which you can place
any number of measures and dimensions in accordance with how you want them to display at
run-time. You can also rename the parameter, using a relevant label, to organize different
parameters categorically.
10
Information Builders
1. WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements
Once you have defined your parameters and selected the relevant data fields, run the report,
chart or document. Using the drop-down lists for each parameter, you can select different
options from the parameter lists to view the data in your report, chart, or document
dynamically. You can then select different parameter options and re-run the report, chart, or
document and your data is refreshed based on these new selections.
When you define parameters, you can dynamically select different options at run-time, giving
you the advantage of reviewing different data scenarios on the fly. Once your parameters are
set up, the run- time options enable you to quickly and easily navigate different data
relationships and make relevant, rapid decisions with your data.
Learn More
For more information about this feature, see the Adding Parameters for Data Selection at Run
Time topic, under Customizing Content, in the WebFOCUS BUE Technical Library, Release
8.2.01.
Business User Edition Portal
The WebFOCUS BUE Release 8.2 Version 01 Key Features for the Business User Edition (BUE)
Portal are:
User Experience Improvements
Sample Content Generator
Visibility Into Shared Application Directory
User Experience Improvements
In Release 8.2 Version 01, you can take advantage of the improved drag-and-drop function,
which allows you more flexibility in adding content to your page. Now, when you drag an item
on the canvas, the drop target highlights the entire area, in which the content will be placed.
Furthermore, you now have a choice to either replace a content item or add it as another tab. If
you choose the latter, a tabbed container will be automatically created. Using this simple and
intuitive action, you can build many complex layouts. For example, rows spanning columns can
be accomplished by dragging content to a 25%, a top, bottom, or either side of the page. This
enhancement applies to all page layouts.
Learn More
For more information, see the WebFOCUS BUE Technical Library, Release 8.2.01.
WebFOCUS Business User Edition Release Guide
11
Visibility Into Shared Application Directory
Sample Content Generator
The enhanced Samples Generator expands the ability to automatically generate a suite of
analytic content based on existing single-path Master Files in your repository. The Samples
Generator is an instant introduction to reporting, demonstrating how any spreadsheet or
Master File can become a basis for a set of compelling content to quickly help you visualize
and analyze your data.
To generate new sample content from an existing Master File, right-click a domain or folder,
point to New, and click Sample Content. After you select a Master File, the Samples Generator
will run and populate your directory with sample charts, reports, and dashboards. Additionally,
the suite will contain charts and reports that provide quick and easy navigation through the
levels of each available hierarchy.
The sample content generated typically contains 15 to 40 items organized in subfolders, in the
selected folder or domain. You can view, edit, or delete this content, as well as use it as a
starting point to develop new content or dashboards.
Learn More
For more information, see the Generating Sample Content topic, under Creating Content, in the
WebFOCUS BUE Technical Library, Release 8.2.01.
Visibility Into Shared Application Directory
The Edit Metadata option has been improved to allow the foccache and baseapp application
directories to be seen in addition to the matching domain name application directory.
Foccache is a temporary application directory for your current session. Do not store any
content or metadata in foccache as the contents are automatically deleted once you close the
Metadata Edit window.
Baseapp is a permanent application directory that is seen by all users across all domains.
Baseapp should be used to store synonyms and images that need to be shared by all users.
Only the manager user ID is able to write into baseapp.
Baseapp is last in the application path definition. If a synonym resides in both the domain
name application directory and baseapp, the one in the domain name application directory will
be used at development and run time.
Learn More
For more information, see the Connecting to Data and Editing Data topic, under Working With
Data, in the WebFOCUS BUE Technical Library, Release 8.2.01.
12
Information Builders
1. WebFOCUS Business User Edition 8.2.01 Key Features and Enhancements
Release 8.2 Version 01 Enhancements
The following enhancements are available in Release 8.2 Version 01.
InfoAssist+ Auto Drill Properties
The Auto Drill Properties section has been added to the InfoAssist+ Properties page of the
Configuration Tab on the Administration Console. Settings in this section control the use of
drill-down navigation options in reports and charts configured to use Auto Drill functionality, as
shown in the following image.
To open and review these properties:
1. In the BUE Portal, on the Menu bar, click Administration, and then click Administration
Console.
2. On the Configuration tab, under the Application Settings folder, click InfoAssist+ Properties.
3. Scroll down to the Auto Drill section and review the default settings.
4. Select each check box to select or clear the option it represents.
Hyperstage Adapter
As of Release 8.2 Version 01, data that is uploaded into Hyperstage now has a target owner/
schema associated with it. The target schema is set to the domain where the upload was
initiated. This secures data across domains.
Learn More
For more information, see the Configuring Hyperstage topic in the WebFOCUS BUE 8.2.01
Technical Library.
Adapter Connections
As of Release 8.2 Version 01, you can now configure any available adapter on a given
platform. Up to five adapters can be configured for a WebFOCUS BUE installation.
WebFOCUS Business User Edition Release Guide
13
Release 8.2 Version 01 Enhancements
14
Information Builders
Chapter
2
WebFOCUS Business User Edition
Release Notes
This topic describes the Release Notes for WebFOCUS Business User Edition (BUE)
Release 8.2 Version 01.
In this chapter:
Browsers
Business User Edition Portal
InfoAssist+
National Language Support (NLS)
ReportCaster
Responsive Autoprompt
Browsers
The following browsers are supported in WebFOCUS BUE 8.2.01:
Internet Explorer® 11 and 10
Microsoft® Edge™
Google Chrome™ 53
Mozilla® Firefox® 49
Business User Edition Portal
When selecting Managed Private Resources from the Administration menu, on the BUE
Portal Menu bar, the Managed Private Resources dialog does not display due to a
JavaScript error.
InfoAssist+
Charting
When you create a bubble chart and attempt to apply a border using the Style options on
the Series tab, the border does not display.
WebFOCUS Business User Edition Release Guide
15
National Language Support (NLS)
Filter Functionality
When using active content in Cache Mode, filtering may not work properly if the content
contains a text field (for example, TX50). As a workaround, consider using an alphanumeric
field (for example, A50).
Internet Explorer Browser Compatibility Mode
When running in IE compatibility mode, drill links may not work properly for Auto Drill, Multidrill, and Auto Linking.
Mapping
When you run a map that has too many polygons, it fails to draw. This applies to maps that
use the US Zipcode 5 layer, in particular.
Optional Parameters
If you have an optional parameter set in a report or chart procedure (.fex) and you save it,
the properties of the procedure accurately reflect that Prompt for Parameters is not
selected. However, if you modify the .fex and remove the filter, the properties of the .fex
are not updated to indicate that Prompt for Parameters is enabled.
National Language Support (NLS)
When signed in as a Developer in a double-byte character set (DBCS) or a single-byte
charater set (SBCS) WebFOCUS BUE environment, the Developer Name is not displayed
correctly in the Web Console.
ReportCaster
Charts with HTML5 output yield an error when scheduled in the ReportCaster End User
Scheduling tool, if the format is overriden to PNG, SVG, GIF, JPG, or PDF.
Responsive Autoprompt
When using the Microsoft Edge browser or an Android™ devices with the Search filter
option, filter values do not display.
16
Information Builders
Feedback
Customer success is our top priority. Connect with us today!
Information Builders Technical Content Management team is comprised of many talented
individuals who work together to design and deliver quality technical documentation products.
Your feedback supports our ongoing efforts!
You can also preview new innovations to get an early look at new content products and
services. Your participation helps us create great experiences for every customer.
To send us feedback or make a connection, contact Sarah Buccellato, Technical Editor,
Technical Content Management at Sarah_Buccellato@ibi.com.
To request permission to repurpose copyrighted material, please contact Frances Gambino,
Vice President, Technical Content Management at Frances_Gambino@ibi.com.
WebFOCUS Business User Edition Release Guide
Release 8.2 Version 01
DN4501660.1116
Information Builders, Inc.
Two Penn Plaza
New York, NY 10121-2898
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising