D-4990 - STANLEY Commercial Hardware

D-4990 - STANLEY Commercial Hardware
D-4990
PRECISION HARDWARE
INTRODUCTION
Page
Introduction.................................................................................................2
ADA “Blue-Paint” Access ........................................................................2
Features/Benefits.......................................................................................3
Electrical Data Specifications .................................................................4
How To Order ..............................................................................................4
TABLE OF CONTENTS
Page
Standard Applications...............................................................................5
Typical System Applications ................................................................6, 7
Architectural Specifications ....................................................................8
Technical Details....................................................................................8, 9
Accessories ........................................................................................10, 11
INTRODUCTION
Stanley Security Solutions is pleased to offer its latest product line designed to
maximize public door accessibility for Americans with Disabilities Act (ADA) Title
III applications. The D-4990 Low Energy Operator offers Stanley’s newest and most
convenient features to gain safe access for ADA applications.
ADA is a civil rights law that is intended to guarantee equality for those who are
physically handicapped or disabled. There are four major sections of the bill and
they are intended to prohibit discrimination in Employment, Public Service, Public
Accommodations, and Telecommunications. Stanley Security Solutions’ focus is on
Title III (Public Accommodations). Title III is not a product specification or a building
code, but a directive to ensure equality in accessibility within public buildings. Such
things as door opening size, door opening force requirements, door closing time,
degree of door opening, and door and lock handle designs must all be addressed to
satisfy the ADA guidelines.
ADA Access
ADA “BLUE-PAINT” ACCESS
D-4990 Low Energy Operator (Non-handed)
ADA “BLUE-PAINT” ACCESS
From the moment a physically disabled person enters the facility parking lot, they immediately begin looking for the ADA “blue- paint” and
signage. All subsequent entry decisions are based on following the “blue-paint” pathways designed to provide access.
ADA “Blue-Paint” Access
After parking, attention quickly turns to locating a barrier-free ramp leading to the entry way and door actuator. Although the Stanley D-4990
Low Energy Operator can be useful on a variety of locations, the ADA “blue-paint” clearly defines a need for assisted ingress/egress.
Barrier-Free Access
ADA Push Plates
2
ADA Door Opening Access
LOW
ENERGY
PO
Access Controls: The D-4990 Low Energy Operator may be used with electric latch retraction exit devices, electric strikes, and other
electric locking systems. A time delay function is built into the control system eliminating the need for
supplemental relays or controls.
Activation: The D-4990 Low Energy Operator can be activated with the press of a switch. Virtually any form of “knowing act” can be used to
initiate the operator making integration with existing systems easier. For the full line of activation devices that Precision hardware offers see
page 10.
Push and Go Option: With the flip of a switch, the D-4990 Low Energy Operator can be configured to activate and open based on a slight
movement of the door. Utilizing this option eliminates the need for supplemental activation devices but does not preclude their use.
Hold-Open Timer: Upon receipt of an activation signal, the operator will power open the door from the closed position. The door may be held
in the open position up to 28 seconds (compliance with ANSI/BHMA A156.19 requires the door to
remain in the open position for a 5 second minimum). Additionally, a “hold-open” switch is provided to hold the door open for extended
periods.
FEATURES/BENEFITS
FEATURES/BENEFITS
External Function Switches: The D-4990 Low Energy Operator is equipped with external function switches providing basic controls.
• Illuminated Power Switch: Illuminated to be visible at night, the switch controls power to the operator motor. The D-4990 Low Energy
Operator functions as a manual closer with power off.
• Mode Control Switch: A three function switch is provided for control of the powered function of the operator. “Day” mode will engage the
operator for normal powered operation with activation by push plate, “Push and Go”, or signal from other “knowing act” device. “Night”
mode disables the operator for normal powered operation; however, the operator can be configured to receive activation signals from a
secure activation device such as a card reader for secure activation, generally from one side. Switching to “Hold-Open” mode will power
the operator opening the door, holding it open indefinitely.
Obstruction Detection: During the opening cycle an obstruction function effectively reduces the possibility of personal injury in accordance
with A156.19. Additionally this feature prevents damage to door and/or surrounding structures. After a stall time-out, the door will close at a
rate and force set by the integrated hydraulic closer.
Power-Close Option: This switched feature can be used to control exterior openings that require additional closing force to resist interior
stack pressures and wind conditions that do not allow the door to close properly. Use this feature to reduce heating and cooling loss and
save energy and money.
D-4990 Door Closer:
• Adjustment: The D-4990 Low Energy Operator (which incorporates the Heavy Duty D-4550 Stanley Door Closer) provides the industry’s
widest range of field adjustable spring power settings. This allows you to adjust the operator for the correct opening and closing forces
to meet any specific application. The closer within the D-4990 Low Energy Operator also incorporates multiple regulating valves, including
the V-Slotted Valve Regulation, which maximizes fine tune adjustment capabilities.
• Door Closer Body: The incorporated D-4550 Stanley Door Closer body is constructed of R-14 Aluminum Alloy providing wear resistance
from contact with the piston during the opening and closing. In addition the R-14 Aluminum Alloy body holds the Cylinder Body
dimensionally stable under extreme internal hydraulic pressures.
Internal Cycle Counter: The D-4990 Low Energy Operator comes equipped with two independent internal cycle counters. The cycle counters
provide current data on manual and powered operations.
Vestibule Function: Each D-4990 Low Energy Operator is equipped with a vestibule function control. This field selectable function provides
electronic sequencing to control the opening of doors within a vestibule application. Sequencing reduces exposure to the exterior elements.
Controlling the opening sequence of a paired vestibule, provides convenience and saves energy to the facility.
Optional Power Supply: The optional PS-490 24VDC @ 0.5A power supply is available to provide power to auxiliary
electrified hardware such as electric strikes. This optional power supply can be mounted within the D-4990 Low Energy
Operator housing.
WER
O P E R AT O R
3
ELECTRICAL DATA SPECIFICATIONS
ELECTRICAL DATA SPECIFICATIONS
•
•
•
•
Power input: 115 VAC ±15% 60 Hz
Current draw: 2A maximum (4 maximum number of operators per breaker)
Auxiliary output: 24VAC @ 0.125A maximum
Solid state output can signal electric strikes
(For powering strikes see page 7.)
Certifications
• ANSI/BHMA A156.19 certified Standard For Power Assist And Low Energy Power Operated Doors
• UL 325 Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems or use
on fire and smoke check doors
• UL 228 Standard for Door Closers-Holders, With or Without Integral Smoke Detectors
• Meets requirements for UL 10B, 10C and UBC 7.2 for positive pressure
• Meets ADA – Americans With Disabilities Act
• Complies with ANSI 117.1 section 4.13
• In compliance with FCC 47 CFR Part 15 Class B emissions requirements (USA)
Exterior Finishes
628 – satin aluminum, clear anodized
313AN – dark bronze anodized
Warranty
Two years from the date of invoice
HOW TO ORDER
Package Includes:
• D-4990 Low Energy Operator (Non-handed)
• Standard Arm (PUSH side) or Track Arm (PULL side)
• Mounting template
• Technical manual
• Door closer spring adjustment wrench
• Tuning screwdriver
• Signs (see page 11)
HOW TO ORDER D–4990/D–4990T
D-4990
628
CL2248
Model No.
Finishes
Accessories
D-4990 – standard arm (push side)
D-4990T – track arm (pull side)
628 – satin aluminum, clear anodized
313AN – dark bronze anodized
For special finishes consult factory
page 5
CL2248 – push plate mounting post– silver
CL2247 – push plate mounting post– black
CL2249 – push plate mounting post– bronze
CL2216 – 6” round push plate– stainless steel
CL4163 – 4 1/2” square push plate– stainless steel
CL2055 – 1 1/2” x 4 1/2” jamb plate– stainless steel
CL2025 – touchless plate
CL4485 – radio control receiver
CL4490 – radio control transmitter
PS490 – power supply
314066 – signage kit
page 10 & 11
Example: D-4990 Low Energy Operator x 628 finish.
2-CL2216-6” round push plates
4
LOW
ENERGY
PO
D-4990 Standard Arm (PUSH Side)
• 6 5/8” (168mm) Maximum Reveal
Note: For adequate installation/mounting, minimum head frame
requirement is 1 3/4”. Minimum of six fasteners are recommended for
installation.
D-4990 Push side
STANDARD APPLICATIONS
STANDARD APPLICATIONS
For complete detailed drawings visit www.stanleytemplates.com
D-4990T Track Arm (PULL Side)
• 1/8” (3mm) Maximum Reveal
D-4990T Pull side
For complete detailed drawings visit www.stanleytemplates.com
WER
O P E R AT O R
5
TYPICAL SYSTEM APPLICATIONS
TYPICAL SYSTEM APPLICATIONS
D-4990 Low Energy Operator with PUSH–PULL
Operation:
• Free ingress & egress using low energy operator or bypassing the operator
and using door manually
• Door operator acts as standard door closer when entering or exiting manually
115VAC
Material:
• Precision Low Energy Operator
• 2 Precision Door Actuators or Push and Go
• Local Power
PUSH–PULL
D-4990 Low Energy Operator with Concealed Mag Lock for Glass Door Applications
Operation:
115VAC
• Free entry when security system is shunted or off
• Entry after hours by card reader, which unlocks & activates low energy
operator
• Free egress at all times by touching push bar or using inside actuator, which
de-energizes mag lock and activates low energy operator
PS TIE
Material:
• Precision Low Energy Operator
• Electromagnetic Shear Lock and Power Supply (PS)
• Electrified Pivot
• Touch Bar Sensor Kit (TBSK) by others PUSH–PULL set
• Terminal Interface Enclosure (TIE)
• BEST Card Reader
• Precision Actuators
Card
Reader
Magnetic Lock for Glass Door
D-4990 Low Energy Operator with Vestibule
Operation:
• When exit device is dogged low energy operator can
be activated by external actuator
• When exit device is locked (Not Dogged) all actuators are
disabled (Ex: After hours at a school or library)
• Recommended dual vestibule actuator will re-open internal or
external doors (Ex: Student waiting for parent pick-up)
115VAC
Material:
• 2 Precision Low Energy Operators
• 2 Precision Actuators (Internal, External)
• 1 CL2388 Precision Dual Vestibule Push Plate (Recommended)
• Optional Precision Interior Vestibule Actuator
• Precision Exit Device with Cylinder Dogging
• Stanley Power Transfer Hinge
• 1 Precision Exit Dummy Trim
Vestibule
6
LOW
ENERGY
PO
D-4990 Low Energy Operator with Electric Strikes
Operation:
• Doors are to be closed and latched (Example: Fire Doors)
• Key switch shunts exterior actuator
(Example: After hours traffic control)
• When not shunted, actuators will signal electric strike power
supply and activate auto operators
• From secure side, egress by manually pushing exit devices or
using inside actuator to activate auto operators
PS
Material:
• 2 Precision Vertical Rod Exit Devices
• Electric Strike & Precision PS490 Power Supply (PS)
• Key Switch
• 2 Precision Actuators
• 2 Precision Low Energy Operators
Key
Switch
Electric Strikes
D-4990 Low Energy Operator with Latch Retraction
Operation:
• Doors are to be closed and latched at all times
• When activated, latch bolts are retracted and door(s)
will automatically open
• Non-rated devices can be dogged for push/pull operation
115VAC
TYPICAL SYSTEM APPLICATIONS
TYPICAL SYSTEM APPLICATIONS
115VAC
PS
115VAC
Material:
• 2 Precision Low Energy Operators
• 1 Precision Power Supply
• 2 Stanley Electric Hinges
• 2 Precision Exit Devices with Electric Latch Retraction
• 2 Precision Actuators
• 1 CL2388 Precision Dual Vestibule Push Plate
Latch Retraction
WER
O P E R AT O R
7
ARCHITECTURAL SPECIFICATIONS
ARCHITECTURAL SPECIFICATIONS
TECHNICAL DETAILS
TECHNICAL DETAILS
Low Energy Operators shall:
1. Conform to ANSI/BHMA A156.19 as a low energy power opening device
2. Be listed under UL228, UL325, UL10B, UL10C, UBC 7.2 and FCC listed
3. Shall be non-handed
4. Be rated for door panels weighing up to 350 lbs (160 kg)
5. Include a 3/16 horsepower, permanent-magnet DC motor
6. Include a manual door closer within the Low Energy Operator adjustable to meet Americans with Disabilities Act (ADA)
5lbs opening force [Push-Side applications only]
7. Be isolated from mounting plate with rubber mounts to mitigate the transmission of forces between the door and operator
8. Incorporate a position encoder to communicate with the microprocessor controller
9. Incorporate a resetable powered operation counter that tracks both powered and non-powered cycling of the Operator
10. Incorporate the following adjustable settings:
i. Hold Open Timer, to 28 seconds
ii. Open Speed
iii. Backcheck Speed
iv. Vestibule Sequence Timer
11. Include DIP switch controls as follows:
i. On board diagnostics
ii. Power close
iii. Push and Go operation
iv. Time delay logic for electrified hardware components
12. Include terminals for auxiliary controls as follows:
i. Activation devices; provide two discrete inputs
ii. Vestibule sequencing
13. Include Control switches as follows:
i. Day/Night/Hold-Open
ii. Power On-Off, illuminated
14. Include hydraulic closer with R-14 Aluminum Alloy body
15. Function as a standard door closer with adjustable spring force size 1 thru 6 for non-powered operation.
16. Include adhesive Low Energy Operator mounting templates
Control Box
Conduit Access
(Typical 1 of 9)
Micro-Switches
and Cams
Spindle
(Non-handed)
Vibration Isolation
(Typical 1 of 4)
Motor
Operator
Spindle
(Non-handed)
D-4550 Non-handed
door closer
Close up of switch face
(shown on opposite side)
8
LOW
ENERGY
PO
Switch Settings
Factory default settings for normal operation;
all switches on the DIP switch are set to OFF.
SETTING
1. Electric strike logic
2. Electric strike
3. PUSH side/PULL side
4. PUSH and GO
5. Power close
ON
fail secure
enabled
PULL side
enabled
enabled
OFF
fail safe
disabled
PUSH side
disabled
disabled
6. N/A
7. N/A
8. N/A
TECHNICAL DETAILS
TECHNICAL DETAILS
Controller
1
3
1
2
3
4
5
6
7
8
9
10
11
15
2
10
11
4
5
6
12
21
7
TB-1
TB-3
TB-2
Pot #3 not used
Pot #1 Hold open time 0-28 seconds. Must be
a minimum of 5 seconds after door fully open
Pot #9 Vestibule time delay
Self test button
Pot #2 Full open position adjustment
Pot #4 Stall force
DIP switches (See chart above)
Digital readout
WER
16
8
13
9
17
18
19
20
14
12 Pot #7 opening torque, only needs changed
for use on heavier doors
13 Pot #8 not used
14 Pot #6 open sweep speed
15 Pot #5 open check speed
16 Encoder plug input
17 AC power in
18 Fuse
19 N/A
20 Motor socket
21 N/A
O P E R AT O R
9
ACCESSORIES
ACCESSORIES
Push Plate Posts
Mounting post for stainless steel push plates.
• CL2248: Silver mounting post
• CL2247: Black mounting post
• CL2249: Bronze mounting post
CL2247
Push Plate Post
(Black)
Post Size: 41 1/2” H x 6 1/4” W x 4 1/4” D.
Note: Push plate post accepts the CL4163: 4 1/2” square plate only.
For use with 4 1/2” square plates part CL4163 and vestibule plate part CL2388.
Activating Door Plates and Accessories
• CL2216: 6” round stainless steel plate with accessibility logo and
“Push To Open” text
• CL2220: 6” surface mount box
• CL2223: 6” weather ring
• CL2236: 4 3/4” square surface mount box
• CL4163: 4 1/2” square stainless steel plate with accessibility logo and “Push To Open” text
• CL4638: 4 1/2” surface mount box
• CL2055: 1 1/2” x 4 3/4” Jamb stainless steel plate with accessibility logo and “Push To Open” text
• CL2245: 1 1/2” x 4 3/4” surface mount box
• CL2388: Dual vestibule push plate with text, accessibility logo and directional arrows
• CL2025: Touchless plate includes single and double gang face plates (see below)
• CL4490: Radio control transmitter (with 9V battery)(433 Mhz)
• CL4485: Radio control receiver (433 Mhz)
• CL4488: Digital Keychain Transmitter (433MHz) (1 button)
• PS490: PS-490 Power supply 24VDC @ 0.5A
Push Plate Packages (One box solution)
• CL4976: Includes (2) CL4163 Text & Logo plates, (2) CL4638 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4977: Includes (2) CL4163 Text & Logo plates, (2) CL4638 boxes – HARD WIRED SOLUTION ONLY
• CL4980: Includes (2) CL2102 Text & Logo plates, (2) CL2236 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4981: Includes (2) CL2102 Text & Logo plates, (2) CL2236 boxes – HARD WIRED SOLUTION ONLY
• CL4990: Includes (2) CL2216 Text & Logo plates, (2) CL2220 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4991: Includes (2) CL2216 Text & Logo plates, (2) CL2220 boxes, – HARD WIRED SOLUTION ONLY
CL2216
6” Round Plate
CL2220
6” Surface
Mount Box
10
CL4163
4 1/2” Square Plate
CL2055
1 1/2” x 4 3/4”
Jamb Plate
CL2388
Dual Vestibule
Push Plate
CL2223
6” Weather Ring
CL4638
4 /2” Surface
Mount Box
CL2245
1 /2” x 4 3/4”
Surface Mount Box
CL2236
4 /4” Square Surface
Mount Box
CL2025
Touchless Plates
(both plates supplied)
1
1
LOW
3
ENERGY
PO
CL4488
Digital Keychain Transmitter
CL4485
Radio Control Receiver
CL4490
Transmitter
PS490
Power Supply
SIGNS
314066: Kit contains 7 signs, supplied with D-4990 Low Energy Operator
WER
1-supplied
1-supplied
2-supplied
2-supplied
O P E R AT O R
ACCESSORIES
SIGNS
ACCESSORIES (CONTINUED)
1-supplied
11
PRECISION HARDWARE
Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible.
Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in
error or which may be subject to changes or modifications by the manufacturer without notice and without obligation. Therefore, no guarantee can
be made or should be assumed or implied with regards to product information contained in this catalog.
Stanley Security Solutions, Inc.
6161 E. 75th Street Indianapolis, Indiana 46250
© 2013 Stanley Security Solutions, Inc. • www.stanleysecuritysolutions.com
10M 1010FP
PHI012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising