sounder -closes "alarm control"
Cover Inside
Front & Back
Mission
Vision
LIFECO’s management and employees
have a clear mission to ensure
superiority and distinction in products
and services, and thus guarantee
customer satisfaction
To serve the demand of our customers
with high quality products and
services with ethical responsibility &
commitment to professionalism.
www.lifeco-uk.com
01
About Us
Lichfield Fire & Safety Equipment Co. Ltd. (LIFECO),
LIFECO has been a global leader in supplying products
covering the full range for fire detection, prevention,
extinguishing and suppression system. LIFECO, with its
world headquarters is located in United Kingdom and
is well poised to serve a variety of International markets
in addition to fulfilling the local market demand.
LIFECO serves Civil Defence, Industrial, Commercial
and Consumer markets with its wide range of quality
and innovative products. LIFECO is represented
globally with its well knit National and International
infrastructure dealer network. The Company’s strengths
are underpinned by a highly skilled workforce, and
a diverse range of quality products and services that
aims to provide a ‘one stop shop’ to satisfy all of our
Customers Fire and Life Safety requirements.
Lichfield Fire & Safety Equipment Co. Ltd. (LIFECO)
has remained at the forefront of the Fire Fighting
Equipment market by constantly striving to provide
02
innovative solutions and services that surpass
Customers’ expectations and by tirelessly seeking
to improve quality standards. To this end, the
company maintains a quality management system
ISO 9001:2008, accredited by BSI (British Standards).
In addition LIFECO products, where applicable, hold
accreditations issued by major inspection organisations
such as Loss Prevention Certification Board (LPCB),
Kitemark, FM Approvals and Underwriters Laboratories
(UL). It has been a global leader in supplying products
covering the full range for fire detection, prevention,
extinguishing and suppression system. Our diverse
range of products continues to be refined and evolved
to meet its customer needs. LIFECO is centrally
located within the United Kingdom, but due to the
exceptionally high demand for its products and services
in the MENA region, LIFECO expanded and establish
its sales and distribution office in Dubai for providing
its customers with the increased sales support, and a
faster delivery schedule.
www.lifeco-uk.com
Management Philosophy
The Right Resources
Excellence in products and services delivered to
customers is the top priority for LIFECO. LIFECO
believes that high-quality production and service
from its staff is facilitated by a healthy workplace - a
work environment that is flexible, encourages open
communication, recognizes good work performance
and respects the differences and rights of individuals.
LIFECO follows the below management principles.
The LIFECO team is comprised of diverse range of
highly trained and well experienced people ranging
from engineering, marketing, designing and sales team
allowing LIFECO to provide a full integrated solutions
in fire protection industry.
High-end products and services
Compliance with international standards
Strict quality control
Timely delivery
Strict SLA – give no promises that cannot be kept
Health and safety compliance and commitment
Flexible work environment
Working to the budget
Monitoring Progress against the programme
Keeping the customer aware on all issues with
transparent and honest information
Final customer satisfaction
Design engineering services are a vital part of
LIFECO’s core business. LIFECO can provide the most
cost effective solution for your fire systems to ensure
compliance with international design.
Services
Design Engineering
LIFECO’s integrated approach to provide advanced
design engineering services to its customers is
backed by its skilled consultants and over a decade of
experience. This helps us provide a holistic approach
to our customers enabling them to establish the right
fire protection system that can combat their fire risks
effectively and innovatively.
www.lifeco-uk.com
03
LIFECO’s core competencies include:
Fire Sprinkler Systems
• New and Current Construction
• Industrial-Commercial-Residential-Retail-
Government
• Fire Protection Underground
• Backflow Preventers
• Inspection/Testing/Maintenance per
NFPA 25
Fire Alarm
• New and Existing Construction
• Testing
• Cabling
• Commissioning
• Project Management
Fire Extinguishers
• Annual Inspections
• Tagging
• Recharging
• New Equipment
• Clean Agents
• Hydrostatic Testing
Life Safety Management
• Security
• Loss Prevention
• Monitoring/MNS
• Surveillance
04
Fire Protection System Maintenance
Consultancy
System Integration and Project
Management
LIFECO’s maintenance consultancy service helps
companies plan and implement maintenance
management systems to meet the needs of the
organizations. We develop efficient, cost-effective
maintenance strategies and procedures aimed
at minimising downtime while keeping safety,
environmental and production impact issues at the
forefront of all maintenance activity planning.
LIFECO has vast engineering expertise with many
years’ experience in providing fire protection to a
diverse range of facilities. These include Oil & Gas,
Power Generation, Commercial Developments, Airport
Hangers, Hospitals, Schools, Government buildings, to
name but a few. We can provide engineering solutions
and system integration for any Fire Risk.
Our consultants have a range of experience and
expertise and are skilled in the practical implementation
of solutions. As a company we offer a range of
services either partnering with associate organisations
or managing and leading our own associates
independently. Services we provide include:
• Maintenance Consulting
• Maintenance Strategies
• Business Process Consulting and Documentation
• Work Management Workflow Design
• Data Quality Analysis
Many a time organisations ponder over the worthiness
of going for maintenance consultancy; the answer is a
resounding ‘yes’. By helping an organisation put in the
right fire protection systems and processes into place,
LIFECO ensure that maintenance can enhance an
organisation’s economic value by safeguarding assets
and reducing downtime in case of a fire risk occurrence.
www.lifeco-uk.com
Manufacturing and Supply
LIFECO have selected experienced fire protection
engineers and project managers to provide assistance
from the design and procurement phase right through
to installation and commissioning.
With over a decade of experience in fire protection
engineering design, LIFECO is a highly acclaimed
UK brand in the fire protection industry for product
development and product engineering services
spectrum, with a reputation in innovation, quality and
end-to-end product ownership.
LIFECO’s service offerings are aligned towards
developing innovative products at cost effective prices
within the shortest time to market. With our wealth of
expertise in engineering domains, we are in a strong
position to offer fire protection engineering design
solutions that combine aesthetics, functionality and
manufacturability.
Global manufacturing and supply is at the heart of our
commitment to help people do more, feel better and
live longer. Our global supply strategy is designed to
make sure that we are operating a lean and efficient
network while ensuring compliance with rigorous
quality, safety and environmental standards.
Continuous improvement of overall performance is
ensured through an Operational Excellence program.
The manufacturing process also includes tests and
checks for quality assurance during or after the
manufacturing and planning the production process
prior to manufacturing and its priorities are focused on
compliance, new product launches and productivity.
Activity
Firefighting equipment, sprinkler system, FM200
system, addressable fire alarm system, conventional
fire alarm system, extinguisher, hose reel, hose
cabinet, fire pump, fire engine, fire protection valve,
fire engineering, nozzles, motor, dry barrel hydrant,
indicator post.
www.lifeco-uk.com
05
INDEX
LIFECO Eagle
07
LIFECO Robin
23
LIFECO Eagle White
35
LIFECO Fire Protection Valves
45
LIFECO Sprinkler and Accessories
67
LIFECO Extinguishers
75
LIFECO Cabinets & Accessories
81
LIFECO Emergency Lights & Exit Lights
86
www.lifeco-uk.com
LIFECO
Eagle
www.lifeco-uk.com
07
Eagle Addressable Fire Alarm Control Panel
Eagle LCD Network Annunciator
Model No: LE-FN-2127/-4127
Model No: LE-FN-LCD-N type
Features
Features
UL 864 9th edition Listed
2 loop (FN-2127 Series) or 4 loop (FN-4127 Series) versions
Analog design using LIFECO’s advanced DCP protocol for fast
and robust communication
Up to 127 sensors & modules, plus 127 analog sounder
bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on
SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC
loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amps
each
Programmable sensitivity levels per device & automatic day/
night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and
serial printer interface
5 on board programmableForm C relays rated at 1 amp at
30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards
or up to 15 LE- FN-LCD-S serial annunciators and up to 17
LE-FN-4127-IO boards
Auto-learn feature
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service, Remote Station
Service when used with the Bosch D9068 contact dialer
Operates on 120VAC or 240VAC input voltage
Powerful & versatile Cause & Effect programming (up to 500
maximum, network wide) including:
*Cause & Effect action
*Disable function configuration
*Test mode configuration
Description
The EAGLE SERIES control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting
127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points.
Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes
a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the
RS-232 interface allows the convenience of programming via a PC.
The system will support a variety of LIFECO devices: photo, ion and heat sensors, which contain a unique, patented sensor design
incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay
controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems
can be established by using a conventional zone-monitoring module.
320 character liquid crystal display (8 line x 40 character)
LED indicators for Fire, Supervisory Alarm, Pre-Alarm, Fire
Output Active, Power On, On Test, Panel Sounder Silenced,
Delay Active, More Events, Point Bypassed, General Trouble,
Power Trouble, System Trouble & NAC Trouble
Dual RS485 ports for primary fire network
RS485 slave bus for expansion - up to 31 LE-FN-4127-IO
boards or up to 15 LE-FN-LCD-S serial annunciators and up
to16 LE-FN-4127-IO boards
2 built-in RS-232 interfaces for programming via a PC and
serial printer interface
4 on board programmable Form C relays rated at 1 Amp at
30VDC (Fire, Supervisory, Trouble & Auxiliary)
Same controls as the FireNET fire panel (Reset, Panel Sounder
Silence, Lamp Test, Alarm Silence, Re-sound Alarm, Fire Drill,
Programmable Function, More Events, More Fire Events, Enter
& Exit)
Local piezo sounder for event notification
Supports user codes & firefighter key to enable access &
controls
Powered by FireNET Aux 24VDC or UL fire listed Aux. 24VDC
supply
Available in red or charcoal, and can be surface or flush
mounted (using trim ring)
True network annunciator, any or all panels can be routed to
the LE- FN-LCD-N. In addition, each event category can be
individually routed to the LE-FN-LCD-N
Up to (64) FireNET panels & LE-FN-LCD-N’s can be networked
together in any combination
500mA of auxiliary power available rated at 24VDC
Auto-learn feature
Built-in help & alarm information screens
Fire drill function
Each LE-FN-LCD-N is completely independent resound, any or
all panels on the network in any combination
Description
The LE-FN-LCD-N type LCD network annunciator is designed to be used with the FireNET analog addressable system. It allows for
remote access, monitoring & control of the FireNET system throughout the building. The LE-FN-LCD-N is a true network annunciator
that can access, monitor & control any or all FireNET panels in the network. Each LE-FN-LCD-N is completely independent. The highly
intuitive user interface and 320 character LCD display of the LE-FN-LCD-N is exactly the same as the FireNET panel.
In addition to routing any panel in the network to the LE-FN-LCD-N, every event category within each panel can also be individually
routed, as well as routing of all remote control functions (reset, alarm silence, re-sound alarm) from individual panels. The LE-FNLCD-N supports the same RS485 expansion port as the FireNET panel, allowing for FireNET expansion boards and accessories to be
connected to the network annunciator.
The LE-FN-LCD-N also has (4) output relays for fire, supervisory, trouble & auxiliary. The relays are programmable (except supervisory).
Security is established by the use of a password or firefighters enable key. Designed to be aesthetically pleasing, the LE-FN-LCD-N is
available in charcoal grey or red and can be surface or flush mounted using a standard trim ring kit.
The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic
tools.
An Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated
service makes this an exceptional product both in performance and value.
08
www.lifeco-uk.com
www.lifeco-uk.com
09
Eagle Serial LCD Annunciator
Eagle Addressable Detectors
Model No: LE-FN- LCD-S-R
Photoelectric Smoke
Sensor
Model No: LE-ALN-V
Features
UL 864 9th edition Listed
Large 320 character liquid crystal display (8 line x 40 character)
allows viewing of system status
LED indicators for Fire, Supervisory Alarm, Pre-Alarm, Fire
Output Active, AC Power On, On Test, Panel Sounder Silenced,
Delay Active, More Events, Point Bypassed, General Trouble,
Power Trouble, System Trouble & NAC Trouble
Same controls as the FireNET fire panel (Reset, Panel Sounder
Silence, Lamp Test, Alarm Silence, Re-sound Alarm, Fire Drill,
Programmable Function, More Events, More Fire Events, Enter
& Exit)
Up to 15 LE-FN-LCD-S serial annunicators may be connected to
a FireNET control panel or network annunciator
Resides on the FireNET slave RS-485 line
Local piezo sounder for event notification
Supports user codes & firefighter key to enable access &
controls
Powered by FireNET Aux 24VDC or UL fire listed Aux. 24VDC
supply
Available in red or charcoal, and can be surface or flush
mounted
Built-in help & alarm information screens
Fire drill function
Description
The LE-FN-LCD-S serial annunciator provides a convenient and cost effective remote annunciator solution. Up to 15 LE-FN-LCD-S
annunciators can be connected to the slave RS-485 port of the FireNET control panel or network annunciator. The LE-FN-LCD-S’s
large 320 character display and navigation buttons are a complete mimic of the FireNET control panel display. The use of a common
interface allows the user to easily operate the LE-FN-LCD-S as if he were operating the FireNET control panel directly.
10
www.lifeco-uk.com
Features
Low profile - Only 2.00” high, including base
Simple and reliable device addressing
Automatic compensation for sensor contamination
Built-in fire test feature
Uses the noise-immune Digital Communication Protocol (DCP), which utilizes
interrupts for fast response to fires
Two built-in power/alarm LEDs
Programmable non-polling LEDs
Non-directional smoke chamber
Vandal resistant security locking feature
Removable smoke labyrinth for cleaning or Replacement
Description
The LIFECO’s LE-ALN-V Photoelectric Smoke Sensor is particularly suited to
detecting optically dense smoke typical of fires involving materials such as
soft furnishings, plastic, foam or other similar materials which tend to smolder
and produce large visible smoke particles. LIFECO’s unique design allows fast
response to flaming fires as well as smoldering fires while preventing false
alarms.
Heat Detector
Model No: LE-ATJ-EA
Features
Low Profile - Only 2.0” high, including base
Simple and reliable device addressing method
Uses the noise immune Digital Communication Protocol (DCP), which
utilizes interrupts for fast response to fires
Adjustable threshold temperature 135°F - 150°F (determined by panel)
Description
The LIFECO LE-ATJ-EA Sensor provides accurate temperature measurement
data to the fire alarm control panel. This sensor is particularly suited to
environments where smoke detectors are unsuitable because of the presence
of system or cooking fumes such as in a kitchen.
www.lifeco-uk.com
11
Eagle Addressable Detectors / Eagle Bases
Multi-Criteria
Detector
Model No: LE-ACC-V
Features
Low Profile - Only 2.23” high, including base
Simple and reliable device addressing method
Automatic compensation for sensor contamination
Built-in fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which
utilizes interrupts for fast response to fires
Two built-in power/alarm LED’s
Non-directional smoke chamber
Vandal resistant security locking feature
Removable smoke labyrinth for cleaning or replacement
Compatible with the analog sensors
Eagle Conventional Detectors
Photoelectric Smoke
Detector (D6)
Model No: LE-SLR-24V
Description
The Lifeco LE-ACC-V Multi-Criteria Smoke Sensor is particularly suited for
detecting smoke produced by a wide range of combustibles found in various
applications. Temperature monitoring is achieved by a thermistor placed for
optimum sensitivity. Lifeco unique design allows fast response to flaming fires
as well as smoldering fires while minimizing false alarms.
Analog Sensor Base
Model No: LE-YBN-NSA-4 and the LE-HSBNSA-6
UL Listed
Designed for use with all LE-NS analog sensors
Available in 4 and 6 inch models
Contains a security locking tab for tamper protection
The LIFECO LE-YBN-NSA-4 and the LE-HSB-NSA-6 mounting bases are
electronics free and contain a simple rugged design with screw terminals for
wiring connections. A common mounting base allows sensor interchange and
maintains loop continuity when sensors are removed. A simple anti-tamper
head locking system is provided which is enabled by removing a small plastic
tab on the back of the sensor. Once locked, the head can only be removed
using a small diameter screw driver.
Model No: LE-ASB
Low profile, 1.8” high (with base)
2 or 4 wire base compatibility, relay bases available
Highly stable operation, RF/Transient protection
Low standby current, 45µA at 24VDC
Two built-in power/sensitivity supervision/alarm LEDs
Non-directional smoke chamber
Vandal resistant security locking feature
Built-in magnetic go/no go detector test feature
Removable smoke labyrinth for cleaning or replacement
Automatic Sensitivity window verification function meets outlined requirements
in NFPA 72, Chapter 2 & 7, Inspection, Testing and Maintenance
Compatible with LE-SIJ-24 ionization detectors
Backwards compatible with LIFECO LE-SLK and LE-SIH detectors
Description
The LE-SLR-24V can be used in all areas where Photoelectric Smoke Detectors
are required. The patented smoke chamber makes the LE-SLV-24V well suited
for fires ranging from smoldering to flaming fires. LE-NS-4 Series, LE-NS-6
Series, LE-HSC-4R or LE-HSC-xxx R Style bases may be used with the LESLV-24.
Features
Description
Analog Sounder
Base
Features
Features
Programmable evacuation codes - Continuous, March, ANSI Temporal
patterns
Base learns the sensor address and assumes an upper range address (128254)
Up to 127 sensors and 127 ASBs can be used on one SLC loop
Can be alarmed or reset by zone or by individual address
ASB SLC loop wire resistance = 50 ohms Max. (total SLC wire run length)
High sound pressure level (85dB SPL at 10 feet)
Photoelectric Smoke
Detector (D2)
Model No: LE-SLV-24N
Features
Low Profile - Only 2.0” high, including base
Simple and reliable device addressing method
Automatic compensation for sensor contamination
Built-in fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which utilizes
interrupts for fast response to fires
Two built-in power/alarm LED’s
Programmable Non-polling LED’s
Non-directional smoke chamber
Vandal resistant security locking feature
Removable smoke labyrinth for cleaning or replacement
Compatible with LE-ALN-V Photoelectric detector & the LE-ATJ-EA heat
detector
Smoke chamber design reduces the susceptibility to nuisance alarms caused
by steam
Description
The LE-SLV-24N can be used in all areas where Photoelectric Smoke Detectors
are required. The patented smoke chamber makes the LE-SLV-24N well suited
for fires ranging from smoldering to flaming fires. LE-NS-4 Series, LE-NS-6
Series, LE-HSC-4R or LE-HSC-xxx R Style bases may be used with the LESLV-24.
Description
The LE-ASB Analog Sounder Base is designed for use with LIFECO analog
sensors LE-ALN-V, LE-ACC-V, and LE-ATJ-EA. Each addressable base is to be
connected to a LIFECO Eagle DCP Signaling Line Circuit (SLC). The LE-ASB
provides an audible alarm in the immediate vicinity. Typical applications are
hotels, apartments, and hospitals.
12
www.lifeco-uk.com
www.lifeco-uk.com
13
Eagle Conventional Detectors
Heat Detector
(FT/ROR)
Model No: LE-DCD-135/-190
Features
Choice of fixed temperature/rate-of-rise 135°F or 190°F heat detector
UL Listed spacing up to 60’ by 60’
2 or 4 wire base compatibility, relay bases available
Highly stable operation, RF/Transient protection
Low standby current, 35µA nominal
Two built-in power/alarm LED’s for 360° viewing
Fully electronic operation
Power/alarm LED’s confirm detector status
Compatible with LIFECO LE-SLR-24V and LE-SIJ-24 detectors and their bases
Eagle Conventional Detector / Eagle Bases
Multi – Criteria
Detector
Model No: LE-SLR-24H
Description
The LE-DCD-135/-190 fixed temperature/rate-of-rise heat detector are suited
for installation where high heat output fires are expected or in areas where
ambient conditions would not allow use of other detection methods.
Heat Detector
(FT)
Model No: LE-DFE-135/190
The LE-SLR-24H can be used in all areas where Photoelectric Smoke Detectors
are required. The wide range smoke chamber makes the LE-SLR-24H well
suited for fires ranging from smoldering to flaming fires. LE-NS-4 Series, LENS-6 Series, LE-HSC-4R or LE-HSC-xxx R Style bases may be used with the
LE-SLR-24H.
Conventional
Detector Bases
Description
Conventional
Detector Bases
Description
Model No: LE-NS6 and LE-NS4 Series
Description
The LE-DFE 135/190 fixed temperature heat detector is suited to alarm in
the presence of slowly rising temperatures. The construction of this model
incorporates an oversized heat collector protected from damage by the builtin, durable plastic guard.
Rate of Rise Thermal
Detector
Model No: LE-DSC-EA
Low profile, 2.2” high (with base)
2 or 4 wire base compatibility, relay bases available
135°F Fixed Temperature heat sensor (Latching)
Heat sensor protected by a built-in guard
Highly stable operation, RF/Transient protection
Low standby current, 45µA at 24VDC
Two built-in power/sensitivity supervision/alarm LED’s
Non-directional smoke chamber
Vandal resistant security locking feature
Removable smoke labyrinth for cleaning or replacement
Automatic Sensitivity window verification function meets outlined requirements
in NFPA 72, Chapter 2 & 7, Inspection, Testing and Maintenance
Description
Features
Choice of fixed temperature - 135°F or 190°F
UL Listed ceiling spacing of 50’ by 50’ (2,500 square feet)
Self-Restoring
Heat element protected by a built-in guard
Contact Rating of 100 ma
Highly Dependable
Latching LED base available
Features
The LE-NS6 and LE-NS4 Series is designed specifically for use with Lifeco
Conventional Models LE-SIJ-24 Ionization Smoke Detector, LE-SLR-24V
Photoelectric Smoke Detector, LE-SLR-24H Photoelectric with Heat Smoke
Detector, LE-SLR-835 Photoelectric Smoke Detector, LE-SLR-835H Photelectric
Smoke Detector w/heat, or LE-DCD-135/190 Fixed Temperature/Rate-of-Rise
Heat Detector.
Features
The LE-DSC features a slim design which combines visual appeal with a high
standard of reliability
The design of the LE-DSC enables the detector to operate in locations where
the temperature is likely to increase suddenly should a fire develop
The operating characteristics of LE-DSC is a key feature of the product
enabling a very cost effective solution for the use of heat detectors. This
detector consumes no current in standby, which enables an unlimited
number of detectors to be connected on the same detection wires
With connection to the standard LIFECO range of conventional bases, the
LE-DSC heat detector can be connected or disconnected very easily, allowing
simple interchangeability with other members of the LIFECO conventional
detectors
Model No: LE-HSC-224R, LE-HSC220R and the LE-HSC-221R
Models LE-HSC-224R, LE-HSC-220R and the LE-HSC-221R are designed
specifically for use with the Lifeco Conventional Models LE-SIJ-24,
LE-SLR-24V, LE-SLR-24H LE-SLR-835, LE-SLR-835H or LE-DCD-135/190.
The LE-HSC-4R is designed specifically for 24 volt 4 wire applications using
Lifeco Conventional Models LE-SIJ-24, LE-SLR-24V, LE-SLR-24H, LE-SLR-835,
LE-SLR-835H or LE-DCD-135/190.
Description
The DSC rate of rise heat detector is suitable for use in most applications that
require heat detection. Please note that special attention should be given to
avoid installation in direct line with hot air heaters, above stoves, ovens or
other heat generating objects.
14
www.lifeco-uk.com
www.lifeco-uk.com
15
Eagle Bases / Eagle Beam Detector / Eagle Duct Detector
Conventional
Sounder Base
Model No: LE-SBC
Features
Wide operating voltage
Selectable Evacuation Codes: continuous or temporal
Three different configurations: individual, group, and global modes
High sound pressure level (85 dB at 10 ft.)
Can be configured to satisfy a wide variety of applications
Eagle Duct Detector / Eagle Modules
Conventional Duct
Detector
Model No: LE-DH-98
Description
The Models LE-SBC Conventional Sounder Base Series are designed
specifically for use with LIFECO EL-NS conventional style smoke detector LESLR-24V Photoelectric Smoke Detector. The SBC Series will provide an audible
evacuation signal (continuous or temporal Code) upon detector alarm. Easily
configured to 12 or 24-volt applications through use of a dipswitch, the bases
can also be configured to activate in individual, group, or global modes.
Features
Detects and limits the spread of smoke throughout building HVAC ducts
Ability to interconnect (all relays operate with a single alarm) up to 30 units
using the same independent power supply
Compatible with building automation and fire alarm systems
Installs quickly and easily
Interchangeable “Plug-In” photoelectric or ionization heads
No screens or filters to clean
Cover provides magnet window and placement guide for operational testing
without disassembly
Rugged gray steel back box with clear cover
Accessories - Remote power, remote alarm indication capability and remote,
horn/piezo capability
Meets UL 268A Requirements
Description
Projected Beam
Smoke Detector
Model No: LE- SPC -24
Microprocessor based for reliability
Simple setup & alignment with signal strength LED’s
Provides 60 feet on center linear protection at a range of 32.8 feet to 328
feet
Automatic compensation for signal drift or dirty lens
Three field adjustable sensitivity settings
Form A alarm and Form B trouble contacts
Calibrated filters available to verify sensitivity
Color-coded emitter and receiver labels for easy recognition
Description
The LIFECO LE-SPC-24 Projected Beam Smoke Detector shall be installed in
accordance with the Installation Instruction Guide provided with every unit.
Refer to the applicable NFPA Standards for additional guidance on spacing,
irregular ceiling surfaces and other design considerations.
Addressable Duct
Detector
Model No: LE-DH- 99A/AR
Features
Detects and limits the spread of smoke throughout building HVAC ducts
Compatible with building automation and fire alarm systems
Installs quickly and easily
No screens or filters to clean
Rugged gray steel back box with clear cover
Accessories - Remote LED alarm indication capability (LE-DH-99-AR only)
Meets UL 268A Requirements
Description
The LE-DH-99 Analog duct smoke detector provides early detection of smoke
and products of combustion present in air moving through HVAC ducts in
Commercial, Industrial and Residential applications. The LE-DH-99 is designed
to prevent the recirculation of smoke in areas by the air handling systems, fans
and blowers. The LE-DH-99-AR is provided with output terminals for remote
accessories such as a remote status indicators and reset key switches or push
buttons. Complete systems may be shut down in the event of smoke detection.
The LE-DH-99-A and the LE-DH-99-AR operate on a DCP powered loop (24
VDC source required for LE-DH-99-AR).
16
The LIFECO LE-DH-98 Duct Smoke Detector provides early detection of smoke
and products of combustion present in air moving through HVAC ducts in
Commercial, Industrial and Residential applications. The LE-DH-98 is designed
to prevent the recirculation of smoke in areas by the air handling systems,
fans and blowers. Complete systems may be shut down in the event of smoke
detection.
Features
www.lifeco-uk.com
Fast Response
Contact Module
Model No: LE-DCP-FRCMA/-I
Features
Single input contact monitor
Fast, reliable contact monitoring utilizing the LIFECO DCP (Digital
Communications Protocol)
Two different mounting configurations
127 devices can be used per DCP loop
Bi-colored indicating LED provides module status (Both Models)
Yellow LED indicates a short circuit condition (LE-FRCMA-I only)
Can be programmed to monitor Normally Open (NO) or Normally Closed (NC)
contacts in Class B
Operates on Class A or Class B SLC loop
Accepts up to 14 AWG wire
UL 864 Listed
Description
The LIFECO LE-DCP-FRCMA/-I Fast Response Contact Monitoring Modules
are designed to be used with pull stations, water flow switches, and other
applications requiring the monitoring of dry contact alarm initiating devices.
The interrupt driven Digital Communications Protocol (DCP) combines
maximum communication reliability and fast response to emergency
conditions. Two different mounting configurations are provided to meet a wide
range of applications. The LE-DCP-FRCMA/-I contact monitoring module does
not require a separate 24 VDC power source.
www.lifeco-uk.com
17
Eagle Modules
Dual Relay Output
Module
Model No: LE-DCP-R2ML/H-I
Eagle Modules
Features
Provides two independently configurable Form C contacts per address
Contacts are rated as follow:
LE-DCP-R2ML: 2A @ 30 VDC / 0.5A @ 120 VAC
LE-DCP-R2MH: 8A @ 30VDC / 4.8A @ 250 VAC
Up to127 devices can be used on each SLC loop
Visible Bi-colored LED is software controlled and can be programmed to
blink red or green when polled. The LED can be latched on when activated.
(For All Models)
Yellow LED indicates a short circuit condition (LE-DCP-R2ML-I & LE-DCPR2MH-I only)
Programming is highly flexible providing 16 priority states plus zoning
capability
Operates on Class A or Class B SLC loop
UL 864 Listed
Supervised Output
Module
Model No: LE-DCP-SOM-R
The Supervised Output Module (DCP-SOM-R) is designed for Single-Interlock
Pre-Action sprinkler systems. During an alarm condition, the DCP-SOMR output
will operate which will trip a solenoid valve, allowing water to fill the sprinkler
system piping.Water is not discharged until a sprinkler headoperates due to
heat from the fire. Pre-Action systems provide an added level of protection
against inadvertent water discharge and are frequently employed in water
sensitive locations such as archival vaults, fine art storage rooms, rare book
libraries and computer centers.
The Dual Relay Modules (LE-DCP-R2ML/H Series) have been designed to
provide flexibile and quick response to emergency conditions. The LE-DCPR2ML/H Series allows independent control of two form C contacts for a
variety of normally open and normally closed contact applications such as fan
operation, elevator recall, door closure, and auxiliary notification.
Model No: LE-DCP-SOM-A/-AI
Features
Built-in SCI circuitry (SOM-AI only)
Flexible application
Quick response to emergency conditions
Operation parameters are maintained by the module, and individual
communication with the control system during emergency conditions is not
required
Contacts are rated 2.0 Amps @ 24VDC
Programming is highly flexible providing 16priority states plus zoning
capability
Programmed device output is turned off, silenced, or programmed to output
the selected pattern
UL 864 Listed
Description
The Class A Supervised Output Modules (LE-DCP-SOM-A & LE-SOM-AI)
have been designed to provide application flexibility and quick response to
emergency conditions. Flexibility is provided by a wide range of operating
modes, including supporting multi-zone operations, and/ or functions, up to
16 different modulation patterns and multi-state programming.
18
www.lifeco-uk.com
UL 864 9th Edition Listed
Flexible Pre-Action application
Quick response to emergency conditions
Operation parameters are maintained by the module, and individual
communication with the control system during emergency conditions is not
required
Contacts are rated 2.0 Amps @ 24VDC
Programming is highly flexible providing 16 priority states plus zoning
capability
Description
Description
Class A Supervised
Output Module
Features
Dual Input Monitor
Module
Model No: LE-DCP-DIMM
Features
UL 864 9th Edition Listed
Fast, reliable contact monitoring utilizing the LIFECO DCP (Digital
Communications Protocol)
127 devices can be used per DCP loop
Bi-colored indicating LED provides module status
Dual input contact monitor
Can be programmed to monitor Normally Open (NO) or Normally Closed
(NC) contacts
Operates on Class A or Class B SLC loop
Accepts up to 14 AWG wire
Description
The LIFECO Dual Input Monitor Module (LE-DCP-DIMM) is designed for use
on a UL listed Fire Alarm Control Panel. It provides two independent contact
monitoring circuits while only utilizing one address on the SLC loop. Up to
127 devices can be placed on a single SLC loop. The device address is
uniquely stored on an onboard EEPROM. The module can be programmed to
monitor normally Open (NO) or Normally Closed (NC) contact fire alarm and
supervisory devices.
www.lifeco-uk.com
19
Eagle Modules
Conventional Zone
Module
Model No: LE-DCP-CZM
Eagle Addressable Manual Pull Stations
Features
Provides an address point for a zone of up to 25 conventional smoke
detectors
Blinks green when polled. Latched on red (controlled by panel) when activated
Device address can be programmed with a handheld programmer. Device
address- ranges from 1 to 127
Compatible with Class B and Class A wiring
Auxiliary power source provides power for the zone of detectors
Compatible with conventional detectors, LE-SLR, LE-SIJ, LE-SLK, LE-SLV, LEDCD, LE-DFE and LE-SIH series
Addressable Manual
Pull Stations
Model No: LE-DCP-AMP/-LP
Description
Model No: LE-DCP-SCI
Features
Can be placed at any location on SLC loop
Checks the line for short circuit at power up. If the line is normal, the relay will
be returned on. If a line short is detected, the relay remains open
Indication of a single short circuit by a yellow LED
Addressable integrated design
All metal construction
Single and dual action models available
Extremely easy to operate
Bi-colored status LED indicates Standby and Alarm conditions
Address is programmable in EEPROM
Address can be programmed when installed
Enclosed switch with glass rod (included)
Terminals accept up to 14AWG wire
Surface mount back box available
Description
The LIFECO Conventional Zone Module (LE-DCP-CZM) is designed for use on
an analog addressable Fire Alarm system. Up to 127 devices can be placed
on a single SLC loop. The device address is uniquely stored on an onboard
EEPROM. The module allows the panel to interface and monitor two-wire
conventional detectors or pull stations.
Short Circuit
Isolator
Features
The LE-DCP-AMS addressable manual pull stations provides a fast and
practical means of manually initiating a fire alarm signal. Both single action
and dual action manual pull stations are available. Resetting of the pull station
requires a 1/8” hex key.
Dual Action Manual
Non-Coded Pull Station
Model No: LE-HPS-DAH/-SAH
Description
The LE-DCP-SCI short circuit isolator should be located between any devices on
the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators
(closest isolators to the left and right of the shorted section) will activate and
their respective LED indicators will be turned on. All devices between the active
short circuit isolators will be dead. This will prevent entire loop failure. Upon
removal of the short condition, the LE-DCP-SCIs will automatically restore, the
entire loop to the normal operating state.
Features
Metal Construction
Enclosed switch with glass rod (included)
10 Amps @ 120 VAC
Available in: Single Action & Dual Action
UL Listed
LIFECO’s Models HPS series pull stations are available in two models:
LE-HPS-SAH single action with Hex lock
LE-HPS-DAH Dual Action with Hex lock
Description
Each model is constructed of a solid die cast housing and comes in glossy
red. The back switch plate is plated steel. The electrical switch is rated for 10
Amps @ 120 VDC normally open contact rating. All models are connected via
terminal block connections.
Weatherproof
Manual Pull Station
Model No: LE-HPS-SAH-WP
Features
Metal Construction
Enclosed switch with glass rod (included)
10 Amps @ 120 VAC
Available in: Single Action & Dual Action
UL Listed
Description
The LIFECO LE-HPS-SAH-WP Weatherproof Manual Pull Station is a UL Listed
fire alarm initiating device suitable for applications requiring outdoor mounting
of the manual fire alarm pull station. The LE-HPS-SAH-WP is appropriate for
applications where the manual pull station may be subject to wet conditions.
20
www.lifeco-uk.com
www.lifeco-uk.com
21
Eagle Conventional Fire Alarm Bell
Conventional Fire
Alarm Bell
Model No: LFB16, LFB18 & LFB110
Features
Quick and Easy Installation
Vibrating Type
High Sound Level
High Reliability
Low Power Consumption
Available in 6”, 8” and 10” Housing
Mounts to Standard 4” Square Electrical Box
Cast Alloy Housing
Indoor or Outdoor* Use
Description
The LFB series bells are intended for fire alarm application only. The gong is of
cast alloy metal suitable to produce loud and standard alarm bell sound. Three
gong sizes are available to suit high or low noise level applications. It produces
a characteristic sound with a 95 dBA @ 10Ft. for 6” bell, 83 dBA @ 10Ft. for 8”
bell and 85 dBA @ 10Ft.
LIFECO
Robin
22
www.lifeco-uk.com
Robin Addressable Fire Alarm Control Panel
Robin Addressable Fire Alarm Control Panel
Model No: LF-6100A/1
Model No: LF-6100A/2
Features
1 intelligent detection circuits
Closed loop design (Class A wiring)
Microprocessor based system
Intelligent distributed system structure
Quick response time - fire alarm in <1 second
Up to 127 devices per loop
Dynamic supervision
Fully field programmable
5” LCD Display - 320x240dpi resolution
21 key user-friendly control switches
15 LED status indicators
Features
Menu driven functions
Up to 5 secure and independent module control function
RS485 communication for fire repeater display panel
CAN Bus communication for networking
Laptop programming
3 Level system password protection
Logic controlled output functions
Circular history event flash memory storage
Data transfer speed and reliability
High performance at low cost
Well mount enclosures
2 intelligent detection circuits
Closed loop design (Class A wiring)
Microprocessor based system
Intelligent distributed system structure
Quick response time - fire alarm in <1 second
Up to 127 devices per loop
Dynamic supervision
Fully field programmable
5” LCD Display - 320x240dpi resolution
21 key user-friendly control switches
15 LED status indicators
Menu driven functions
Up to 5 secure and independent module control function
RS485 communication for fire repeater display panel
CAN Bus communication for networking
Laptop programming
3 Level system password protection
Logic controlled output functions
Circular history event flash memory storage
Data transfer speed and reliability
High performance at low cost
Well mount enclosures
Description
Description
The LF-6100A/1 is a distributed intelligent fire alarm control panel with a microprocessor based advanced detection and protection
system. With its flexibility, unique design and ability to utilize both intelligent and conventional devices, makes it a very reliable system
for life safety use. It adopts the use of a multi-line LCD screen for ease of viewing of events and controls, RTOS (Real time operating
system), for real time monitoring and display of events, and a graphical display for user-friendly menu and control operation as well
as ease of identifying information being sent by field devices to the fire alarm controller.
The LF-6100A/2 is a distributed intelligent fire alarm control panel with a microprocessor based advanced detection and protection
system. With its flexibility, unique design and ability to utilize both intelligent and conventional devices, makes it a very reliable system
for life safety use. It adopts the use of a multi-line LCD screen for ease of viewing of events and controls, RTOS (Real time operating
system), for real time monitoring and display of events, and a graphical display for user-friendly menu and control operation as well
as ease of identifying information being sent by field devices to the fire alarm controller.
The LF-6100A/1’s design widely applies to all kinds of industrial and commercial constructions with its high resistance to humidity,
wide operating temperature range, high reliability and ease of installation and configuration.
The LF-6100A/2’s design widely applies to all kinds of industrial and commercial constructions with its high resistance to humidity,
wide operating temperature range, high reliability and ease of installation and configuration.
24
www.lifeco-uk.com
www.lifeco-uk.com
25
Robin Addressable Fire Alarm Control Panel
Robin Repeater Panel
Model No: LF-6100A/4
Model No: LF-6150
Features
4 intelligent detection circuits
Closed loop design (Class A wiring)
Microprocessor based system
Intelligent distributed system structure
Quick response time - fire alarm in <1 second
Up to 127 devices per loop
Dynamic supervision
Fully field programmable
5” LCD Display - 320x240dpi resolution
21 key user-friendly control switches
15 LED status indicators
Features
Menu driven functions
Up to 5 secure and independent module control function
RS485 communication for fire repeater display panel
CAN Bus communication for networking
Laptop programming
3 Level system password protection
Logic controlled output functions
Circular history event flash memory storage
Data transfer speed and reliability
High performance at low cost
Well mount enclosures
1000 Point Address Monitoring
LCD Screen Display
Up to 30 Repeater Panels per System
Easy Installation (Wall-mounting)
Small Size
User Friendly
4-wire connection
Low Power Consumption
LED Status Indicators
Internal Sounder with Silence Button
Description
The LF-6150 Repeater Panel is responsible for replicating fire and trouble information of a specific region from the Fire Control
Unit. The device can monitor the alarm or the trouble state of 4 loops with up to 508 addressable points at most and display its
information. Fire alarm and Fault alarm LEDs are provided to indicate the status of the monitored devices and the communication
between the repeater and the Main Control Unit.
Description
The LF-6100A/4 is a distributed intelligent fire alarm control panel with a microprocessor based advanced detection and protection
system. With its flexibility, unique design and ability to utilize both intelligent and conventional devices, makes it a very reliable system
for life safety use. It adopts the use of a multi-line LCD screen for ease of viewing of events and controls, RTOS (Real time operating
system), for real time monitoring and display of events, and a graphical display for user-friendly menu and control operation as well
as ease of identifying information being sent by field devices to the fire alarm controller.
The LF-6100A/4’s design widely applies to all kinds of industrial and commercial constructions with its high resistance to humidity,
wide operating temperature range, high reliability and ease of installation and configuration.
26
www.lifeco-uk.com
www.lifeco-uk.com
27
Robin Detectors
Intelligent Photo-Electric
Smoke Detector
Model No: LF-PE-6101
Robin Detectors
Features
Low Profile Design
Built-in CPU
Specialized Smoke Chamber Design
Auto Analysis
Dynamic Automatic Compensation
High Veracity of Fire Judgment
ALARM FIRST! – Less than 1 second
Data transfer Speed and Reliability
2-wire non polarity design
High Performance at Low Cost
Twist Lock Base
Provision for Remote LED Indicator
Use LF-DP-6190 for Device Coding
Intelligent Combined
Smoke & Heat Detector
Model No: LF-PHD-6110
Description
Model No: LF-HD-6102
Features
Low Profile Design
Fixed Point Type
Equipped with CPU Central Processor
2-wire non polarity design
Electronic Heat Thermistor
Automatic Judge Fire Alarm
ALARM FIRST! – Less than 1 second
High Performance at Low Cost
Twist Lock Base
Provision for Remote LED Indicator
Use LF-DP-6190 for device addressing
Description
Low Profile Design
Built-in CPU
Specialized Smoke Chamber Design
Electronic Heat Thermistor
Auto Analysis
Dynamic Automatic Compensation
High Veracity of Fire Judgment
ALARM FIRST! – Less than 1 second
Data transfer Speed and Reliability
2-wire non polarity design
High Performance at Low Cost
Twist Lock Base
Provision for Remote LED Indicator
Use LF-DP-6190 for Device Coding
Description
The LF-PE-6101 intelligent type photo-electric smoke detector utilizes the light
scatter sensing principle. It has an infrared light source, which emits signals
and photo-diode, which senses the scattering light with the effect of smoke
entering the chamber. The chamber is of light proof labyrinth type protected
with thin metals mesh for protection from dust, insects and other external
interferences.
Intelligent Heat
Detector
Features
The LF-PHD-6110 intelligent type combined smoke and heat detector contains
an optical smoke sensor and a thermistor temperature sensor whose outputs
are combined to give the final analogue value. The LF-PHD-6110 is a plug-in,
two wire detector compatible with the LF-6100A Series Control Panel. Each
detector consists of a dust resistant, field-cleanable photoelectric chamber
and microprocessor based electronics with a low-profile plastic housing.
Detector Isolating
Base
Model No: LF-DB-LI
Features
Loop Powered
Polarity Sensitive
Isolates Short Circuit faults and spurs
Red LED Indicator
Description
The LF-DB-LI isolating base is intended for use with the LF-6100 Series
detectors.
The LF-DB-LI isolating base senses and isolates short circuit faults on LF-6100
loops and spurs. In short-circuit conditions the integral red LED is illuminated.
The LF-HD-6102 intelligent heat detector provides an advanced method of
detection, address programming and supervision, combined with sophisticated
control panel communication. The detector uses a state of the- art thermistor
providing 143°F (62°C) fixed temperature.
28
www.lifeco-uk.com
www.lifeco-uk.com
29
Robin Detectors / Robin Manual Call Point
Intelligent UV Flame
Detector
Model No: LF-FD-6104
Addressable Manual
Call Point
Model No: LF-MCP-6103
Features
Low Profile Design
Sensitive Ultraviolet Sensor
Equipped with CPU Central Processor
LED Indicator
Polarized Wiring
ALARM FIRST! – Less than 1 second
High Performance at Low Cost
Dust, Corrosion and Humidity Resistant
Twist Lock Base
Use LF-DP-6190 for device addressing
Addressable Siren
with Flasher
Model No: LF-AV-6126
Features
Built-in CPU
Addressable Output Device
Quick Response Time
Piezoelectric Horn
Automatic or Manual Activation
Data Transfer Speed and Reliability
High Performance at Low Cost
Wall Mount Type
Four Wire Operation
Use LF-DP-6190 for device addressing
Description
Description
The LF-FD-6104 Intelligent UV Flame Detector has a wide angular sensitivity
that can reliably and quickly detect the presence of a flame within its field of
view by sensing the ultra violet radiations emitted.
The LF-AV-6126 Addressable Siren with Flasher adopts an built-in integrated
circuit, a piezoelectric sounder and a flasher which when combined, produces
a high energy conversion efficiency for effective output of light and sound
while utilizing a minimum amount of power. It is also directly connected to the
detection loop of the Fire Panel to effectively monitor the device for faults or
control for alarm activation.
Features
Built-in CPU
ALARM FIRST! – Less than 1 second
Data Transfer Speed and Reliability
LED Status and Alar m Indicator
Easy Operation – Push to Activate
Resettable Type
Durable Design
High Performance at Low Cost
Two Wire Operation
Use LF-DP-6190 f or device addressing
Use LF-MB-6103 f or Mounting Base
Description
The LF-MCP-6103 Manual Call Point has a 2 way communication with the Fire
Alarm Control Panel thus making it an intelligent initiating device. With its sleek
and durable design, it can be installed anywhere along corridors, hallways and
exits for easy access to operate and in cases where there is a requirement for
manually activating an alarm signal.
30
Robin Addressable Flasher / Robin Module
www.lifeco-uk.com
Signal Input Module
Model No: LF-SI-6105
Features
Low Profile Design
Built-in CPU
Interfaces Normally Open Dry Contacts
ALARM FIRST! – Less than 1 second
Data Transfer Speed and Reliability
Polarized Wiring
LED Status Indicators
High Performance at Low Cost
Two Wire System
Use LF-DP-6190 for device addressing
Description
The LF-SI-6105 Signal Input Module provides the means of connecting Direct
Shorting Devices to the Fire Alarm Control Panel. The module converts a
normally open contact input which could monitor and report the status of the
contact to the Fire Panel.
www.lifeco-uk.com
31
Robin Module / Robin Isolator
Relay Output Module
Model No: LF-RM-6106
Features
Low Profile Design
Built-in CPU
Interfaces Normally Open Dry Contacts
ALARM FIRST! – Less than 1 second
Data Transfer Speed and Reliability
Polarized Wiring
LED Status Indicators
High Performance at Low Cost
Two Wire System
Use LF-DP-6190 for device addressing
Robin Conventional Zone / Robin Module
Conventional Zone
Interface
Model No: LF-CDI-6107
Description
The LF-RM-6106 Relay Module provides the means of directly controlling an
auxiliary device and its status as well. The Relay Module can be operated either
by manual operation using switch inputs, or by automatic control using the Fire
Panel logic functions.
Model No: LF-LI-6190
Features
Low Profile Design
Built-in CPU
Self-restoring
Up to 50 Addressable Devices per Isolator
Data Transfer Speed and Reliability
Polarized Wiring
LED Status Indicators
High Performance at Low Cost
Two Wire System
Description
The LF-LI-6190 Short-Circuit Isolator provides short circuit protection on
addressable device circuits. When a short is detected by the LF-LI-6190, it
isolates the affected segment of the circuit, allowing the remaining devices
to continue operating normally. The LF-LI-6190 is self-restoring, automatically
reconnecting to circuit segment when the fault is removed The isolator’s design
widely applies to all kinds of industrial and commercial constructions with its
high resistance to humidity, wide operating temperature range, high reliability
and ease of installation and configuration.
32
www.lifeco-uk.com
Low Profile Design
Built-in CPU
Interfaces Conventional Series Devices
ALARM FIRST! – Less than 1 second
Up to 20 Conventional Devices per Module
Data Transfer Speed and Reliability
Polarized Wiring
LED Status Indicators
High Performance at Low Cost
Four Wire System
EMI and RFI Resistant
Use LF-DP-6190 for device addressing
Description
The LF-CDI-6107 Conventional Zone Interface provides the means of
connecting a single zone of conventional detectors to the Fire Alarm Control
Panel. Typical connections would be conventional type smoke, heat, manual
call point, heat sensing cables, and gas detectors. It can be used as an
addressable alarm initiating device for conventional devices and as a control
input for other auxiliary functions.
It also adopts pre-emptive alarm technology which organizes the data received
from the detection loop. The information with the highest priority would transfer
first.
Short Circuit Isolator
Features
Remote Control
Module
Model No: LF-CSW-6154
Features
Totally Independent from Main Controller
Low Profile Design
Fast and Accurate Response Time
Feedback Monitoring
Selectable Normally Open or Close Contact Input
Polarized Wiring
High Performance at Low Cost
Description
The LF-CSW-6154 Remote Control Module provides the means of directly
controlling an auxiliary device and its status as well. With its flexibility, the user
has the option of either utilizing a normally open or normally close dry contact
available on the module. It has the provision of connecting a normally open
switch feedback input to monitor the status of the controlled auxiliary device.
www.lifeco-uk.com
33
Robin Programmer
Address Programmer
Model No: LF-DP-6190
Features
Address Coding and Reading of addressable devices
Analog Value Reading
Calibrated Value Reading
Low Voltage Indicator
Optional Power Supply (9V Internal Battery or External 24 VDC)
LCD Screen
Easy to Use
Description
The LF-DP-6190 Handheld Programmer is responsible for addressing fire
alarm devices such as call points, detectors and modules connected in a loop.
Calibrated and Analog Value of devices can also be read and will be displayed
on the LCD screen.
LIFECO
White Eagle
34
www.lifeco-uk.com
White Eagle Conventional Fire Alarm System
1 Zone Fire Alarm Control Panel –
Eagle 1
Features
1 Fixed Zones
Supports up to 32 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
1 monitored sounder outputs
2 Zone Fire Alarm Control Panel –
Eagle 2
Features
2 Fixed Zones
Supports up to 64 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
2 monitored sounder outputs
36
Active EOL allowing continuous monitoring of inputs
Walk test
LED indication
Levels of access protected by means of security key
Plastic box
Description
The Eagle 1 conventional fire alarm panel provides 1 fixed zones.
With up to 32 fire detectors and unlimited call points that can be
connected to every fire zones. The Eagle 1 is situated in a plastic
box. The panel is easy for installation and maintenance and
provides user-friendly daily operations. The panel is suitable for
residential, small and middle office applications with protected
area up to 1000m2. The panel is available in different language
versions for the front panel.
Active EOL allowing continuous monitoring of inputs
Walk test
LED indication
Levels of access protected by means of security key
Plastic box
Description
The Eagle 2 conventional fire alarm panel provides 2 fixed zones.
With up to 32 fire detectors and unlimited call points that can be
connected to every fire zones. The Eagle 2 is situated in a plastic
box. The panel is easy for installation and maintenance and
provides user-friendly daily operations. The panel is suitable for
residential, small and middle office applications with protected
area up to 1000m2. The panel is available in different language
versions for the front panel.
www.lifeco-uk.com
White Eagle Conventional Fire Alarm System
4 Zone Fire Alarm Control Panel –
Eagle 4
Features
4 Fixed Zones
Supports up to 128 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
2 monitored sounder outputs
6 Zone Fire Alarm Control Panel –
Eagle 6
Features
6 Fixed Zones
Supports up to 192 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
1 monitored sounder outputs
Active EOL allowing continuous monitoring of inputs
Walk test
LED indication
Levels of access protected by means of security key
Plastic box
Description
The Eagle 4 conventional fire alarm panel provides 4 fixed zones.
With up to 32 fire detectors and unlimited call points that can be
connected to every fire zones. The Eagle 4 is situated in a plastic
box. The panel is easy for installation and maintenance and
provides user-friendly daily operations. The panel is suitable for
residential, small and middle office applications with protected
area up to 2200m2. The panel is available in different language
versions for the front panel.
Active EOL allowing continuous monitoring of inputs
Walk test
LED indication
Levels of access protected by means of security key
Plastic box
Description
The Eagle 6 conventional fire alarm panel provides 6 fixed zones.
With up to 32 fire detectors and unlimited call points that can be
connected to every fire zones. The Eagle 6 is situated in a plastic
box. The panel is easy for installation and maintenance and
provides user-friendly daily operations. The panel is suitable for
residential, small and middle office applications with protected
area up to 2200m2. The panel is available in different language
versions for the front panel.
www.lifeco-uk.com
37
White Eagle Conventional Fire Alarm System
8 Zone Fire Alarm Control Panel –
Eagle 8
Features
8 Fixed Zones
Supports up to 256 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
2 monitored sounder outputs
Active EOL allowing continuous monitoring of inputs
Walk test
LED indication
Levels of access protected by means of security key
Plastic box
Description
The Eagle 8 conventional fire alarm panel provides 8 fixed zones.
With up to 32 fire detectors and unlimited call points that can be
connected to every fire zones. The Eagle 8 is situated in a plastic
box. The panel is easy for installation and maintenance and
provides user-friendly daily operations. The panel is suitable for
residential, small and middle office applications with protected
area up to 3000m2. The panel is available in different language
versions for the front panel.
White Eagle Conventional Fire Alarm System
LED indication
Levels of access protected by means of security key
Plastic box
Description
16 Zone Fire Alarm Control Panel –
Eagle 16
Features
16 Fixed Zones
Supports up to 512 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
4 monitored sounder outputs
Active EOL allowing continuous monitoring of inputs
Walk test
Eagle 16 is a conventional fire detection and indication panel
that has 8 fixed and is expanded to 16 zones. Eagle 16 is based
on a modular principle - a power unit, a control panel, zone/
sounder expanders, an indication module and battery space. A
detailed LED indication shows the status of the system, divided
in two groups - for technician level and for monitor and observer
level. An appropriate mode for zone detector testing by a single
person has been implemented - One Man Test. All zones and
sirens within the system can be eliminated (Bypass). The panel
has been designed to operate with one 12 V battery back-up
power, which reduces the costs by the value of one battery per
system. The Eagle 16 is suitable for vast range of applications big office buildings, schools, 2 supermarkets and other with over
3000m2.
LED indication
Levels of access protected by means of security key
Plastic box
Description
12 Zone Fire Alarm Control Panel –
Eagle 12
Features
12 Fixed Zones
Supports up to 384 detectors
Unlimited call points
1 “fire” and 1 “fault” relay outputs
4 monitored sounder outputs
Active EOL allowing continuous monitoring of inputs
Walk test
38
Eagle 12 is a conventional fire detection and indication panel that
has 8 fixed and is expanded up to 16 zones with fire detectors and
call points. Eagle 12 is based on a modular principle - a power
unit, a control panel, zone/sounder expanders, an indication
module and battery space. A detailed LED indication shows the
status of the system, divided in two groups - for technician level
and for monitor and observer level. An appropriate mode for
zone detector testing by a single person has been implemented
- One Man Test. All zones and sirens within the system can be
eliminated (Bypass). The panel has been designed to operate
with one 12 V battery back-up power, which reduces the costs
by the value of one battery per system. The Eagle 12 is suitable
for vast range of applications - big office buildings, schools, 2
supermarkets and other with over 3000m2.
www.lifeco-uk.com
www.lifeco-uk.com
39
White Eagle Detectors
Photo-Electric
Smoke Detector
Model No: LF-PE-4111
White Eagle Manual Call Point
Features
Microprocessor based design
High accuracy of fire detection
Quick fire alarm transfer speed
Special chamber design
Polarized wiring
Provision for remote LED Indicator
Ease of maintenance
Manual Call
Point
Model No: LF-MCP-4113
Description
Model No: LF-HD-4112
Features
Microprocessor based design
High accuracy of fire detection
Rate of rise and fixed temperature
Quick fire alarm transfer speed
Polarized wiring
Provision for remote LED Indicator
Ease of maintenance
Description
The LF-HD-4112 Conventional type heat detector identifies fire with both
rapidly rising and gradually increasing temperature. It has three levels of fixed
temperature settings to adapt itself to the local temperature of the area being
protected. The detector utilizes a modern, accurate, state of the art negative
temperature coefficient (NTC) thermistor that senses thermal changes in the
protected area. And combined with the data stored in its non-volatile memory,
the detector sends out alarm information to the Fire alarm control unit during
rapid rise of heat or upon reaching its pre-set temperature rating.
40
www.lifeco-uk.com
ALARM FIRST! – Less than 1 second
Data Transfer Speed and Reliability
Easy Operation – Push to Activate
Resettable Type
Durable Design
High Performance at Low Cost
Two Wire Operation
Use LF-MB-6103 for Mounting Base
Description
The LF-PE-4111 Conventional type Photoelectric Smoke Detector uses a
specialized smoke chamber design, which could sense the presence of smoke
particles produced by fast combustion or slow smoldering fire. Combining fire
algorithms stored on its memory with the special three part design of the
smoke chamber and given the photo-sensor’s viewing angle, the detector can
effectively sense both white smoke and black smoke with virtually no false
alarm.
Heat Detector
Features
The LF-MCP-4113 with its new sleek and durable design, it can be installed
anywhere along corridors, hallways and exits for easy access to operate in
cases where there is a requirement for manually activating an alarm signal.
The manual call point’s design widely applies to all kinds of industrial and
commercial constructions with its high resistance to humidity, wide operating
temperature range, high reliability and ease of installation and configuration.
Manual Call
Point
Model No: LF/B10
Features
Arabic and English Label
Quick fire alarm transfer
East operation - Push to activate
No polarity
Ergonometric construction
Durable Design
High performance at Low cost
Easy to install
Semi flush or Surface mount
With protective cover
Suitable for indoor use
Description
The LF/B 10 Call point series satisfies the requirements for a manual fire alarm
initiating device. With its sleek and durable design, it is easily observed yet
does not hinder with building design and can be fitted along corridors, hallways
and exits for easy access to operate in cases where there is a requirement for
activating an alarm signal.
www.lifeco-uk.com
41
White Eagle Siren / White Eagle Sounder
Siren & Siren with
Strobe
Model No: LF-SI & LF-SS
Features
Quick response time
100±5dB (@24v DC)
Piezoelectric horn
High performance at low cost
Integrated electronics
High intensity strobe
With reverse polarity protection
Easy maintenance
Easy to Install
2-Wire Operation
Ceiling or sidewall mount
White Eagle Sounder
Sounder
Model No: LF-SD-4229
The LF-SD-4229 Sounder is a high quality sounder that offers dependable
audible alarms at the lowest current available. It also comes with the Timesaver
base, in which the connections are made to the base during the initial wiring
phase which results in faster and more reliable installation. The sounder head
‘twists and clicks’ into the base on commissioning, avoiding the wiring and
connection problems associated with traditional sounders.
The LF-SI/SS Siren and Siren with Strobe are designed for maximum
performance, reliability and cost effectiveness. It adopts a built-in integrated
circuit, a piezoelectric sounder and high intensity strobe which when combined,
produces high energy conversion efficiency for effective output of light and
sound while utilizing a minimum amount of power.
Model No: LF-SB-4228
Features
Low current LED beacon
Simple ‘First Fix’ installation
Tone and volume can be pre-set or adjusted off-base - 20dB
Electronic sounder beacon certified to BS-EN54-3
Description
The LF-SB-4228 Sounder Beacon is a high quality sounder and beacon
combination that offers dependable audible and visual alarms at the
lowest current available. It also comes with the Timesaver base, in which the
connections are made to the base during the initial wiring phase which results
in faster and more reliable installation. The sounder head ‘twists and clicks’
into the base on commissioning, avoiding the wiring and connection problems
associated with traditional sounders.
Wide voltage range
Simple ‘First Fix’ installation
2 Alarm stages
32 tones
Tone and volume can be pre-set or adjusted off-base
Synchronised alarm tones
Volume control - Typical 8dB
Description
Description
Sounder Beacon
Features
With a choice of 32 tones including all the major international standards, the
LF-SD-4229 Sounder Beacon has universal acceptance.
AV Sounder
Model No: LF-AV-4125
Features
Quick response time
Piezoelectric horn
High intensity strobe
Integrated Electronics
High performance at low cost
3 user selectable tones via jumpers
Wall mount type
Two wire operation
Description
The LF-AV-4125 Conventional audible and visual alarm indicator adopts a
built-in integrated circuit, a piezoelectric sounder and a high intensity strobe
which when combined, produces a high energy conversion efficiency for
effective output of light and sound while utilizing a minimum amount of power.
With a choice of 32 tones including all the major international standards, the
LF-SB-4228 Sounder Beacon has universal acceptance.
42
www.lifeco-uk.com
www.lifeco-uk.com
43
Remote Indicator / Conventional Fire Alarm Bell
LED Remote
Indicator
Model No: LFR-100
Features
Easy installation
Wide viewing angle
Low profile design
Low power consumption
High precision and stability
Quick fire alarm transfer speed
High accuracy of fire detection
2 LED indicators
Description
The LFR-100 LED remoted indicator is an attractive device used in installations
where a detector going to alarm is likely to occur behind a locked door,
inaccessible rooms, or in a ceiling void to provide indication of the activation
of a fire detector.
Conventional Fire
Alarm Bell
Model No: LFB16, LFB18 & LFB110
Features
Quick and Easy Installation
Vibrating Type
High Sound Level
High Reliability
Low Power Consumption
Available in 6”, 8” and 10” Housing
Mounts to Standard 4” Square Electrical Box
Cast Alloy Housing
Indoor or Outdoor* Use
Description
The LFB series bells are intended for fire alarm application only. The gong is of
cast alloy metal suitable to produce loud and standard alarm bell sound. Three
gong sizes are available to suit high or low noise level applications. It produces
a characteristic sound with a 95 dBA @ 10Ft. for 6” bell, 83 dBA @ 10Ft. for 8”
bell and 85 dBA @ 10Ft.
44
www.lifeco-uk.com
LIFECO
Fire Protection Valves
Fire Protection Valves: OS & Y Gate Valve
OS&Y Resilient Seated
Gate Valve - Flanged
Ends - 300PSI
Model No: 3299-300-FLF / Sizes: 2.5",
3", 4", 5", 6", 8", 10" & 12"
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachement nut
High quality graphite stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
UL Listed and FM Approved
300 PSI ( 200PSI (3299-200-FLF) and 250PSI (3299-250-FLF) available
upon request)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: OS & Y Gate Valve
OS&Y Resilient Seated
Gate Valve - Flanged X
Grooved Ends - 300PSI
Model No: 3299-300-FXGLF / Sizes: 2.5", 3",
4", 5", 6", 8", 10" & 12"
Note:
Design and material are subject to change without notice.
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
Triple O-rings stem seal
NPT plug on body
Flanged to ANSI B16. 1 Class125 (Other flange types available upon request)
Grooved ends to AWWA C606 standard or Metric Dimensions
UL Listed and FM Approved
300PSI Working pressure ( 200PSI (3299-200-FXGLF) and 250PSI
(3299-250-FXGLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
OS&Y Resilient Seated
Gate Valve - Grooved
Ends - 300PSI
Model No: 3299-300-GLF / Sizes: 2.5",
3", 4", 5", 6", 8", 10" & 12"
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
Triple O-rings stem seal
NPT plug on body
Grooved ends to AWWA C606 standard or Metric Dimensions
UL Listed and FM Approved
300PSI Working pressure ( 200PSI (3299-200-GLF) and 250PSI (3299250-GLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
OS&Y Resilient Seated
Gate Valve - Flanged
Ends - 250PSI
Model No: 3199-250-FLF / Sizes: 14”,16”
& 18”
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Flanged to ANSI B16. 1 Class125 (Other flange types available upon request)
UL Listed
250PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
Design and material are subject to change without notice.
46
www.lifeco-uk.com
www.lifeco-uk.com
47
Fire Protection Valves: OS & Y Gate Valve
OS&Y Resilient Seated
Gate Valve - Flanged
Ends - 200PSI
Model No: 3199-200-FLF / Sizes: 20” & 24”
OS&Y Resilient Seated
Gate Valve - Mechanical
Joint Ends - 250PSI
Model No: 3199-250-MJLF / Sizes:14”, 16”
& 18”
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Flanged to ANSI B16. 1 Class125 (Other flange types available upon request)
UL Listed
200PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: OS & Y Gate Valve
OS&Y Resilient Seated
Gate Valve - Mechanical
Joint Ends - 200PSI
Model No: 3199-200-MJLF / Size: 20” & 24”
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Mechanical joint designed to ANSI / AWWA C153
UL Listed
250PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Note:
Design and material are subject to change without notice.
Design and material are subject to change without notice.
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Mechanical joint designed to ANSI / AWWA C153
UL Listed
250PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
OS&Y Resilient Seated
Gate Valve - Flanged X
Mechanical Joint Ends 250PSI
Model No: 3199-250-FXMJLF / Sizes:14”,
16” & 18”
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Flanges to ANSI B16.1 Class125 (other types available upon request)
Mechanical joint designed to ANSI / AWWA C153
UL Listed
250PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
48
www.lifeco-uk.com
www.lifeco-uk.com
49
Fire Protection Valves: OS & Y Gate Valve
OS&Y Resilient Seated
Gate Valve - Flanged X
Mechanical Joint Ends 200PSI
Model No: 3199-200-FXMJLF / Size: 20”
& 24”
Features
Complies with AWWA C515 Standard
Heavy duty handwheel and attachment nut
High quality graphite stem seal
NPT plug on body
Flanges to ANSI B16.1 Class125 (other types available upon request)
Mechanical joint designed to ANSI / AWWA C153
UL Listed
200PSI Working pressure
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: NRS Type Gate Valve
NRS Resilient Seated
Gate Valve - Flanged
Ends - 300PSI
Model No: 3288-300-FLF / Sizes: 2.5", 3", 4",
5", 6", 8", 10" & 12"
Note:
Design and material are subject to change without notice.
Features
Complies with AWWA C515 Standard
Non-rising stem
4” to 12” Size provided with indicator post plate, other sizes - plate provided
only when specified at time or order
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16. 1 Class124 (Other flange type available upon request)
UL Listed for size 4” - 12”. FM Approved for all sizes
300PSI Working pressure ( 200PSI (3288-200-FLF) and 250PSI (3288250-FLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
NRS Resilient Seated
Gate Valve - Grooved
Ends - 300PSI
Model No: 3288-300-GLF / Sizes: 2.5", 3", 4",
5", 6", 8", 10" & 12"
Features
Complies with AWWA C515 Standard
Non-rising stem
4” to 12” Size provided with indicator post plate, other sizes - plate provided
only when specified at time or order
Triple O-rings stem seal
NPT plug on body
Grooved end to AWWA C606 standard or metric dimensions
UL Listed for size 4” - 12”. FM Approved for all sizes
300PSI Working pressure ( 200PSI (3288-200-GLF) and 250PSI (3288250-GLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
50
www.lifeco-uk.com
www.lifeco-uk.com
51
Fire Protection Valves: NRS Type Gate Valve
NRS Resilient Seated
Gate Valve - Mechanical
Joint Ends - 300PSI
Model No: 3288-300-MJLF / Sizes: 3", 4", 6",
8", 10" & 12"
Features
Complies with AWWA C515 Standard
Non-rising stem
4” to 12” Size provided with indicator post plate, other sizes - plate provided
only when specified at time or order
Triple O-rings stem seal
NPT plug on body
Mechanical Joint end to ANSI/AWWA C153/A21. 53 standard
UL Listed for size 4” - 12”. FM Approved for all sizes
300PSI Working pressure ( 200PSI (3288-200-MJLF) and 250PSI (3288250-MJLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: NRS Type Gate Valve
NRS Resilient Seated
Gate Valve - Flanged X
Mechanical Joint- 300PSI
Model No: 3288-300-FXMJLF / Sizes: 3", 4",
6", 8", 10" & 12"
Note:
Features
Complies with AWWA C515 Standard
Non-rising stem
4” to 12” Size provided with indicator post plate, other sizes - plate provided
only when specified at time or order
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class125
Mechanical joint ends to ANSI/AWWA C153/A21, 53 Standard
UL Listed for size 4” - 12”. FM Approved for all sizes
300PSI Working pressure ( 200PSI (3288-200-FXMJLF) and 250PSI
(3288-250-FXMJLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
Design and material are subject to change without notice.
NRS Resilient Seated
Gate Valve - Flanged X
Grooved - 300PSI
Model No: 3288-300-FXGLF / Sizes: 2.5", 3",
4", 5", 6", 8", 10" & 12"
Features
Complies with AWWA C515 Standard
Non-rising stem
4” to 12” Size provided with indicator post plate, other sizes - plate provided
only when specified at time or order
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class125
UL Listed for size 2.5” - 3”. FM Approved for all sizes
300PSI Working pressure ( 200PSI (3288-200-MJLF) and 250PSI (3288250-MJLF) available upon request.)
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
NRS Resilient Seated
Gate Valve - Flanged
Ends- 200PSI
Model No: 3188-200-FLF / Sizes: 20” & 24”
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
UL Listed
200 PSI
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
Design and material are subject to change without notice.
52
www.lifeco-uk.com
www.lifeco-uk.com
53
Fire Protection Valves: NRS Type Gate Valve
NRS Resilient Seated
Gate Valve - Flanged
Ends- 250PSI
Model No: 3188-250-FLF / Sizes: 14”, 16”
& 18
NRS Resilient Seated
Gate Valve - Mechanical
Joint- 200PSI
Model No: 3188-200-MJLF / Sizes: 20” & 24”
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
UL Listed
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: NRS Type Gate Valve
NRS Resilient Seated
Gate Valve - Mechanical
Joint - 250PSI
Model No: 3188-250-MJLF / Sizes: 14”, 16”
& 18”
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Mechanical joint ends to ANSI/AWWA C153/A21. 53 Standard
UL Listed
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Note:
Design and material are subject to change without notice.
Design and material are subject to change without notice.
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
UL Listed
200 PSI
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
NRS Resilient Seated
Gate Valve - Flanged X
Mechanical Joint- 200PSI
Model No: 3188-200-FXMJLF / Sizes: 20”
& 24”
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
Mechanical joint ends to ANSI/AWWA C153/A21. 53 Standard
UL Listed
200 PSI
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Note:
Design and material are subject to change without notice.
54
www.lifeco-uk.com
www.lifeco-uk.com
55
Fire Protection Valves: NRS Type Gate Valve / Check Valves
NRS Resilient Seated
Gate Valve - Flanged X
Mechanical - 250PSI
Model No: 3188-250-FXMJLF / Sizes: 14”,
16” & 18”
Features
Complies with AWWA C515 Standard
Non-rising stem
With handwheel or a 2” operating nut
Triple O-rings stem seal
NPT plug on body
Flanges to ANSI B16.1 Class 125 (Other flange types available upon request)
Mechanical joint ends to ANSI/AWWA C153/A21. 53 Standard
UL Listed
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: Check Valves
Swing Check Valve Grooved ends - 300PSI
Model No: 5905-300-GLF / size .5”, 3”, 4”, 5”,
6”, 8”, 10” & 12”
i. Swing Check Valve Grooved (250psi)- 5905-250-GLF
ii.Swing Check Valve Grooved (200psi)- 5905-200-GLF
Design and material are subject to change without notice.
Wafer Check Valve
175PSI
Model No: 5201-300-FLF / Sizes: 2”, 2.5”, 3”,
4”, 5”, 6”, 8”, 10” & 12”
Features
Complies with AWWA C508 standard, Clear waterway design
Seating type is resilient material to bronze seat construction
Two test plugs included - Installed on one side of the valve body
Flanges to ANSI B16. 1 Class125 (other flange type available upon request)
UL & FM Approved
300PSI Working pressure
200PSI and 250 PSI available on request
-10°C to 82°C Working temperature
Fusion bonded epoxy coated interior and exterior to AWWA C550 standard
corrosion protection
Full waterway design
Seating type is resilient material to bronze seat construction
Ductile iron disc EPDM encapsulated
Groove ends to AWWA C606 standard or metric dimensions
UL Listed and FM approved
300PSI Working pressure
200PSI and 250 PSI available on request
-10°C to 82°C Working temperature
Fusion bonded epoxy coated interior and exterior to AWWA C550 standard
corrosion protection
Model Available:
Note:
Swing Check Valve Flanged ends - 300PSI
Features
Model No: 5211-175-FL / Size 4”, 6”,8”, 10”
& 12”
Features
The extremely short face to face dimension and compact design of this valve
allow installation and service in tight spaces
Spring assisted for better dynamic behaviour
Soft seated for perfect tightness even at low differential pressure
Flange to ANSI B16.1 Class 125
UL Listed
175PSI Working pressure
-10°C to 82°C Working temperature
Spray painted or fusion bonded epoxy coated interior and exterior to AWWA
C550 standard corrosion protection
Model Available:
i. Swing Check Valve Flanged (250psi)- 5201-250-FLF
ii.Swing Check Valve Flanged (200psi)- 5201-200-FLF
56
www.lifeco-uk.com
www.lifeco-uk.com
57
Fire Protection Valves: Butterfly Valves
Butterfly Valve - Wafer
Type - Gear Operated 300PSI
Model No: 2305-300-LF / Sizes: 2”, 2.5”, 3”,
4”, 5”, 6”, 8”, 10” & 12”
Features
Single piece through shaft
Vulcanized seat design for bubble-tight shutoff at 300PSI
Flag type position indicator
Low torque operation, high cycle life
With built in supervisory switch
Top flange to ISO 5211/1
Flanges to ANSI B16.1 Class 125, EN1092-2 PN10/16. (other type available
upon request)
UL Listed for size 2” - 12”
UL & FM Approved for 2” - 6”
300PSI Working pressure
200PSI and 250PSI available upon request
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Fire Protection Valves: Indicator Posts
Vertical Type Indicator
Post
Model No: LF-IP888
Features
Indicates if the valve is in the OPEN or SHUT position
Built in Gear drive reduces the torque necessary to open and shut large valve
The adjustable dimension “L” is 34.5” to suit deeper buried valves. If more
adjustments is required, specify at time of order
The wrench handle fits over a “U” bracket on the barrel and may be fixed to
the barrel with a padlock (provided by others) for security
OPEN and SHUT targets can be easily adjusted to fit exactly in the viewing
window
Internally and externally spray epoxy painted RAL3000
UL & FM Approved
Note:
Design and material are subject to change without notice.
Models Available:
i. Butterfly Valve - Wafer Type (250 psi) - 2305-250-LF
ii. Butterfly Valve - Wafer Type (200 psi) - 2305-200-LF
Butterfly Valve Grooved - Gear
Operated - 300PSI
Model No: 2905-300-LF / Sizes: 2.5", 3", 4",
5", 6", 8", 10" & 12"
Features
Vulcanized seat design for bubble-tight shutoff at 300PSI
Flag type position indicator
Low torque operation, high cycle life
With built in supervisory switch
Top flange to ISO 5211/1
Groove ends to AWWA C606 Standard or Metric dimensions
UL Listed for size 2” - 12”
UL & FM Approved for 2” - 6”
300PSI Working pressure
200PSI and 250PSI available upon request
-10°C to 82°C Working temperature
Corrosion protection - Fusion bonded epoxy coated interior and exterior to
AWWA C550 standard
Models Available:
i. Butterfly Valve - Grooved (250 psi) - 2905-250-LF
ii. Butterfly Valve Grooved (200psi)- 2905-200-LF
58
www.lifeco-uk.com
Wall Type Indicator
Post
Model No: LF-WP999
Features
Indicates if the valve is in the OPEN or SHUT position
Used to operate a valve installed behind a wall
With a 12" O.D. post flange to mount on a wall
Operated by handwheel
Can be supplied in open left or open right
UL listed and FM approved
Internally and externally red epoxy spray painting, RAL3000
Manufactured in accordance with AWWA C503 standard
Seating type is resilient material to DI integral seat
Flange drilled to DN80 EN1092-2 PN16 and BS10
2½" London round thread outlet. Other type outlets are available, such as
2½" instantaneous outlet, 2½" belfast V outlet and dublin bayonet outlet
16 Bar working pressure
-10°C to 120°C working temperature
Internally and externally spray painted or fusion bonded epoxy powder
coated (FBE)
Note:
Design and material are subject to change without notice.
www.lifeco-uk.com
59
Fire Protection Valves: Strainer
Y Strainer - Flanged
Ends - 175PSI
Model No: 6201-175-FLF / Sizes: 2-½", 3", 4",
5", 6", 8", 10" & 12"
Features
NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs
Screens are peforated 304 stainless steel with spot welded seam
Recessed seat in body assures accurate screen alignment
Flanges to ANSI B16. 1 Class125 (other flange type available upon request)
UL Listed
175PSI Working pressure
-10°C to 120°C Working temperature
Internally and externally spray-painted or fusion bonded epoxy powder
coated (FBE) corrosion protection
Fire Protection Valves: Hydrant
Dry Barrel Hydrant
Model No: LF-FM1510
Features
Manufactured in accordance with AWWA C502 Standard
UL listed / FM approved
(1) 4.5" Pumper nozzle,
(2) 2.5" Hose nozzle, NH Thread. other thread types available
Multiple bury lengths available, Specify bury depth at time of order
6" Mechanical joint shoe to AWWA C111 standard/6" Flanged shoe to ANSI
B16.1, Class125
Specify mechanical joint or flanged shoe at time of order
Traffic flange model, with full "break-away" safety feature
250PSI Working pressure
-10°C to 82°C Working temperature
Internally and externally liquid epoxy painted corrosion protection
Note:
Design and material are subject to change without notice.
Y Strainer - Grooved
Ends - 175PSI
Model No: 6201-175-GLF / 2-½”, 3”, 4”, 5”, 6”,
8”, 10” & 12
Basket Type - Flanged
Ends - 200PSI
Model No: 6301-200-FLF / Sizes: 3", 4", 5", 6",
8", 10" & 12"
60
Features
NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs
Screens are peforated 304 stainless steel with spot welded seam
Recessed seat in body assures accurate screen alignment
Groove dimension comply with Metric or AWWA C606 standard
UL Listed
175PSI Working pressure
-10°C to 120°C Working temperature
Internally and externally spray-painted or fusion bonded epoxy powder
coated (FBE) corrosion protection
Features
Screens are perforated 304 stainless steel with spot welded seam
Flanges to ANSI B16. 1 Class125 (Other types available upon request)
UL Listed
-10°C to 82°C Working temperature
Internally and externally spray-painted or fusion bonded epoxy powder
coated (FBE)
200PSI Working Pressure
Groove dimension comply with Metric or AWWA C606 standard
www.lifeco-uk.com
Material Specification
No.
1
3
5
7
9
11
13
15
17
19
21
Component
Operating nut
O-ring
Bonnet bolt & nut
Pumper nozzle
Hose nozzle
Pumper nozzle cap
Cap chain
Safety coupling
Safety flange
Lower barrel
Drain ring housing
Material
Bronze ASTM B62
NBR Commercial
Stainless steel AISI 201
Bronze ASTM B62
Bronze ASTM B62
Cast iron A126 Class B
Carbon steel Plated
Stainless steel A890
Ductile iron A536 65-45-12
Ductile iron A536 65-45-12
Ductile iron A536 65-45-12
No.
2
4
6
8
10
12
14
16
18
20
22
Component
Hold down nut
Bonnet
Upper rod
Pumper nozzle gasket
Hose nozzle gasket
Hose nozzle cap
Upper barrel
Safety flange bolt & nut
Lower rod
Stem pin
Drain ring
Dimensions (mm/inch) L
915 (3’ – 0”)
1068 ( 3’ – 6”)
1220 (4’ – 0”)
1372 (4’ – 6”)
1524 (5’ – 0”)
1676 (5’ – 6”)
1829 (6’ – 0”)
1981 (6’ – 6”)
Material
Bronze ASTM B62
Cast iron A126 Class B
Carbon steel AISI 1045
NBR Commercial
NBR Commercial
Cast iron A126 Class B
Ductile iron A536 65-45-12
Stainless steel AISI 201
Carbon steel AISI 1045
Stainless steel A276
Bronze ASTM B62
Weight (kg)
170
178
183
196
200
210
215
224
www.lifeco-uk.com
61
Fire Protection Valves: Hydrant
Wet Barrel Fire
Hydrant
Model No: LF-WBH
Fire Brigade Valve
Features
Fire Dept. Connection;
Manufactured in accordance with AWWA C503 standard
UL listed and FM approved
(1) 4.5" Pumper nozzle
(2) 2.5" Hose nozzles
Nozzle threads to NFPA 1963 standard
Flange to ANSI B16.1, Class 125 (6") Other types available upon request
250 PSI for FM approved
200PSI for UL listed
-10°C to 82°C working temperature
Interior and exterior is e-coated to a dry film thickness of 0.6 mils minimum,
then fusion bonded epoxy powder coated (FBE) corosion protection
Model No: LF-FDCG and LF-FDCI
Features
The brass seat is integrated with brass body
2.5” swivels are pin lug design for easy operation
Compatible with local fire service requirements
Breakable plastic plug to prevent debris from being accidently introduced
into the water way.
Description
Straight type model LF-FDCG
Note:
LIFECO FM Approved and UL listed Fire Department Connections are designed
and manufactured in accordance with UL 405 - Standard for Fire Department
Connections. We have two models, one is a straight type model LF-FDCG and a
90° type model LF-FDCI which casted from solid brass alloy for extend service
life.
Design and material are subject to change without notice.
Material Specification
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Component
Body
Pumper nozzle cap
Pumper nozzle
Main valve
Main valve holder
Hose nozzle cap
Hose nozzle
Stem
Stem nut
Operating nut
O-ring
Pumper nozzle gasket
Hose nozzle gasket
Material
Ductile iron A536 65-42-12
Cast ironA126 Class B
Bronze B62 C83600
Rubber NBR
Stainless steel AISI 304
Cast iron A126 Class B
Bronze B62 C83600
Stainless steel AISI 304
Bronze B62 C83600
Bronze B62 C83600
Rubber NBR
Rubber NBR
Rubber NBR
90° type model LF-FDCI
Lifeco Oblique
Landing Valve
Description
LIFECO Oblique Landing Valves are manufactured according to BS 5041 and
are available with an outlet of 65mm Ø with instantaneous coupling to BS 336
and inlet with flange or screw.
Models:
i. Screw Type – LF-OBVS
ii. Flanged Type – LF-OBVF
Lifeco Straight thru
Landing Valve
Description
LIFECO Straight thru Landing Valves are manufactured according to BS 5041
and are available with an outlet of 65mm Ø with instantaneous coupling to BS
336 and inlet with flange or screw.
Models:
i. Screw Type – LF-STLVS
ii. Flanged Type – LF-STLVF
62
www.lifeco-uk.com
www.lifeco-uk.com
63
Fire Brigade Valve
Lifeco E Type Pressure
Regulating Valve
Fire Brigade Valve
Description
Pressure Regulating "E" Type Valve enables a uniform firefighting pressure
to be maintained at any hydrant in a fire protection system irrespective of
its location, the regulator can be quickly and easily adjusted in-site to meet,
individual floor level pressure requirements.
Lifeco Pressure
Restricting Angle
Valve
Models:
Description
LIFECO PRESSURE Restricting ANGLE VALVE is used with a fire hose reel or
rack assemblies or as a fire department outlet connection. Water pressure is
controlled up to 300psi by adjustable flow restriction. Locking pin mechanism
restricts unnecessary frill opening of valve. Pin may be removed by trained
personnel as needed.
Models:
i. Screw Type – LF-EPRVS
ii. Flanged Type – LF-EPRVF
Size
1-1/2 (38)
2-1/2 (64)
1-1/2 (38
Lifeco Breeching Inlet
Description
2-1/2 (64)
LIFECO breeching inlets are used in a buildings for firefighting purposes, fitted
with inlet connection at fire brigade access level and outlet connection at
specified points, which is normally dry but capable of being charged with water
by pumping from fire service appliances.
Models:
i. 2-Way – LF-BI2W
ii. 4-Way – LF-BI4W
Lifeco Angle Hose
Valve
Lifeco Test And Drain
Valve
Model No: LF-TD/25-UL ,1” (25)
LF-TD/32-UL, 1-1/4 (32)
Description
Pressure Restricting
Angle Valve with female
to male connection
Pressure Restricting
Angle Valve with female
to male connection
Pressure Restricting
Angle Valve with female
to female connection
Pressure Restricting
Angle Valve with female
to female connection
Model
RV-AH20
RV-AH30
RV-AH15
RV-AH25
Description
The test and drain valve is a combined two position lever operated ball valve,
sight glass and stop valve. Test & Drain with an integral sight glass assembly,
provides a simplified means for testing of water ow alarm devices and draining
of feed mains.
Description
LIFECO Fire Hose Angle Valves (90 degrees pattern) are for use on standpipe
having inlet and outlet opening of the same size or with the inlet larger than
outlet. The valve is made in accordance with UL 668 Hose Valve for Fire
Protection Service standards.
Models:
Size
1-1/2 (38)
1-1/2 (38)
2-1/2 (64)
2-1/2 (64)
64
www.lifeco-uk.com
Description
Standard Angle Valve
with double female
connection
Standard Angle Valve
with female to male
connection
Standard Angle Valve
with double female
connection
Standard Angle Valve
with female to male
connection
Model
AH15
AH20
AH25
AH30
www.lifeco-uk.com
65
Fire Protection Valves: Pre-action & Deluge Valve
Pre-action & Deluge
Valve
Model No: LF-DV100A & LF-DV150A
Features
Simple configuration for easy maintenance
No False Alarm
Outstanding Durability
Anti-corrosive Trim
Reliable Operation
Field replaceable diaphragm and clapper seat
UL Listed & FM Approved
Maximum Working Pressure: 175 psi (12 bar)
Flange Connection : ANSI B16.1 FF Class 150
Hydrostatic Test Pressure: 25 bar (350 psi)
Description:
LIFECO Preaction & Deluge Valve with external resetting function is a differential
latch type valve which designed for fire protection system.
The external resetting feature of the LF-DV valve provides easy resetting of a
pre-action system without opening the valve cover for manual repositioning of
the clapper and latch mechanism.
Deluge Valve
Model: A
Features
Sizes Available: 50, 80 & 200 mm (2", 3" & 8")
Vertical inlet and Horizontal outlet
No latch, no piston, no hinges
Reset without any tools
Service without removal from line
Internal and external surfaces epoxy coated for extra protection
Description:
LIFECO Deluge Valve is known as a system control valve in a deluge system,
used for fast application of water in a spray system. Deluge valve protects
areas such as power transformer installation, storage tank, conveyor protection
and other industrial application etc. With the addition of foaming agent deluge
valve can be used to protect aircraft hanger and inflammable liquid fire.
Wet Alarm valve
Model No: LF-WAV100A &
LF-WAV150A
Features
Cast iron body for extra hydrostatic strength
Quick removal and easy service for rubber-faced clapper
UL Listed & FM Approved
Maximum Working Pressure: 175 psi (12 bar)
Flange Connection : ANSI B16.1 FF Class 150
Hydrostatic Test Pressure: 25 bar (350 psi)
Description:
As an essential part of a wet sprinkler system, LIFECO Wet Alarm Valve is used
as a device that detects water flow in the fire equipment installed in residential
area, manufacturing area, and so on.
The valve is designed to initiate an alarm during a sustained flow of water
(such as the flow required by an open sprinkler) by operating an optional water
motor alarm and/or a pressure switch.
66
www.lifeco-uk.com
LIFECO
Sprinkler and Accessories
Sprinkler and Accessories
Horizontal Sidewall
Sprinklers
Model No: LF240 & LF241
68
Sprinkler and Accessories
Features
Glass bulb
Standard Spray Pattern
K-factor 5.6
Quick & Standard Response
Available in 135 / 155 / 200 °F (57 / 68 / 93°C) Temperature rating
1 ⁄ 2" NPT Thread Size
Pendent and Upright
Sprinklers
Model No: LF211, LF221, LF210 and
LF220
Features
Glass bulb
Standard Spray Pattern
K-factor 5.6
Quick & Standard Response
Available in 135 / 155 / 200 °F (57 / 68 / 93 °C) Temperature rating
1 ⁄ 2" NPT Thread Size
Description
Description
The 1/2 inch orifice LIFECO Standard and Quick Response (ref. ISO 6182)
Horizontal Sidewall Sprinklers are automatic sprinklers of the frangible bulb
type. They are “Standard and Quick response - standard orifice spray Sprinklers”
intended for use in fire Sprinkler systems designed in accordance with the
Standard installation rules recognized by the applicable Listing or Approval
agency (e.g., UL Listing is based on NFPA 13 requirements). The Horizontal
Sidewall Sprinklers are generally used in lieu of pendent and upright sprinklers
because of building consideration or installation economy considerations.
They mare designed for installation along a wall or the side of a beam and
just beneath a smooth ceiling. Installed with their center line of waterway,
these sprinklers produce a quarter-spherical water discharge pattern that is
predominately directed downward and outward from the deflector; however, a
portion of the spray is also directed towards the back wall.
The 1/2 inch orifice LIFECO Standard and Quick Response (ref. ISO 6182)
Pendent and Upright Sprinklers are automatic sprinklers of the frangible bulb
type. They are “Standard and Quick response orifice spray Sprinklers” intended
for use in fire Sprinkler systems designed in accordance with the Standard
installation (NFPA 13). The pendent and upright sprinklers all produce a hemispherical water distribution pattern below the deflector. It is most stable against
the change of atmospheric temperature and is well matched to accommodate
any architecture.
www.lifeco-uk.com
The 1/2 inch orifice LIFECO Standard and Quick Response Pendent and Upright
are rated for use at a maximum service pressure of 12.3 kg/cm2 (175psi)
and they are available in the temperature ratings of 68°C (155°F, Red) and
93°C (200°F, Green). The flow rates “Q” in LPM (GPM) are determined by the
following formula: Q = K P Where the nominal discharge coefficient “K” equals
80 (5.6); and, “P” equals the residual flowing pressure in kgf/cm2 (psi). Listing
standards permit the actual value of “K” to vary from 76.4 to 83.6 (5.3 to 5.8);
however, for hydraulic calculations, a K-factor of 80 (5.6) is to be applied.
The Frame is made of brass forging (copper alloy) per KS D5101. The bulb
cap (bulb retainer) is copper alloy per KS D5102 (C5191). The Spring Seat
consists of a Beryllium Nickel disc spring that is sealed on both its inside and
outside faces with a Teflon gasket.
www.lifeco-uk.com
69
Sprinkler and Accessories
Concealed Pendent
Models: Standard Response – LF820
Quick Response – LF821
Sprinkler and Accessories
Features
Glass bulb
Standard Spray Pattern
K-factor 5.6
Quick & Standard Response
Flush Pendent
Model No: LF720 & LF 721
Description
LIFECO Standard and Quick Response Concealed Pendent Sprinkler LF820
and LF821 are thermosensitive glass-bulb spray sprinklers with the cover plate.
The sprinkler is pre-assembled with a threaded adapter for installation with a
low-profile cover assembly that provides up to 10mm of vertical adjustment.
Models: LF222
Features
3mm Glass Bulb
Standard Spray Patter
K-factor 5.6
Available in 135 / 155 / 200 °F (57 / 68 / 93 °C) Temperature rating
1 ⁄ 2" NPT Thread Size
Description
LIFECO Clean Room Type Sprinkler is used with flexible sprinkler hose in clean
rooms of semiconductor manufacturing facilities (TFT-LCD, PDP and etc.) and
it has been designed to fit through existing mold bar hole in the clean room
the sprinkler.
70
www.lifeco-uk.com
Fusible Alloy Type
Standard Spray Pattern
K-factor 5.6
Quick & Standard Response
Available in 135 / 155 / 200 °F (57 / 68 / 93 °C) Temperature rating
1 ⁄ 2" NPT Thread Size
Description
The 1/2 inch orifice LIFECO LF720 Standard Response (ref. ISO 6182)
Flush Sprinklers are automatic sprinklers of the fusible solder type. They are
“Standard response-Standard orifice spray Sprinklers” intended for use in
fire Sprinkler systems designed in accordance with the Standard installation
(NFPA 13). They produce a hemispherical water distribution pattern below
the deflector. They share basically the same functional principle with other
standard response glass bulb sprinkler. Nevertheless, it is designed a low
profile, aesthetically pleasing, ceiling mounted sprinkler that offers a high
degree of protection for human life.
The two-piece design allows installation and testing of the sprinkler prior
to installation of the cover plate. The “thread-on”, “thread-off” design of the
concealed cover plate assembly allows easy installation of the cover plate
after the system has been tested and the ceiling finish has been applied. The
cover assembly can be removed and reinstalled, allowing temporary removal
of ceiling panels without taking the sprinkler system out of service or removing
the sprinkler.
Clean Room Type
Features
High Velocity Water
Spray Nozzle
Features
UL Listed
Various Spray Angles
3/4" BSPT Thread Size (NPT OPTIONAL)
Description
LIFECO High Velocity Water Spray Nozzles are internal swirl plate type open
nozzles designed for use in fixed water spray or deluge system for the fire
protection application.
Model:
Nozzle – HV-AS
www.lifeco-uk.com
71
Sprinkler and Accessories
Medium Velocity
Water Spray Nozzle
Sprinkler and Accessories
Features
Pressure Gauge UL
Listed
UL Listed
Various Spray Angles
3/4" BSPT Thread Size (NPT OPTIONAL)
Model No: HDP
Description
The LIFECO Medium Velocity Water Spray Nozzles are open type (non-automatic nozzles, designed for directional spray application in fixed fire protection
system. Medium velocity water spray nozzle has an external deflector, which
discharges water in a directional cone shaped pattern of small droplet size. The
water is uniformly distributed over the surface to be protected.
Features
90mm Dial
0-21 Kg. /Sq. Cm (0-300 PSI) range
Polished Stainless Steel, weather proof case
Bourdon Tube: Phosphorus bronze / Monel
UL Listed
Description
Pressure Gauges are specifically designed for Fire Sprinkler Services. Model
HDP has corrosion resistant polished stainless steel case Bezel and Brass
wetted parts.the deflector. They share basically the same functional principle
with other standard response glass bul
Model:
Nozzle – Model A
Water Flow Indicator
Description
LIFECO's Water Flow Indicator is placed on the automatic water sprinkler
systems pipeline to identify the flow of water in case of a fire outbreak. When
a flow of water is detected by a clapper or vane, a signal will be transmitted
to the control panel.
Thread Type
Pressure Switch
Saddle Type
Saddle Type
LF JZ-A-50
LF JZ-A-65
LF JZ-A-80
LF JZ-A-100
LF JZ-A-125
LF JZ-A-150
LF JZ-A-200
Description
LIFECO's LF/JY Pressure Switch is designed to detect the flow of water through
pressure variation in an automatic water sprinkler system. It usually is mounted
on the outlet of the retard chamber and transmits a signal to control panel
identifying flow of water in the system.
72
www.lifeco-uk.com
Model No: LF-ZCV
Features
Fusible Alloy Type
Standard Spray Pattern
K-factor 5.6
Quick & Standard Response
Description
Models:
Thread Type
LF JZ-Y-25
LF JZ-Y-32
LF JZ-Y-40
LF JZ-Y-50
—
—
—
Zone Control Valve
Package
Zone control valves are designed to operate utilizing electrical service for
actuation. A sprinkler system must be capable of shut down after the fire
has been controlled, and for periodic maintenance and modification. Control
valves can provide this function. In the simplest system a single shut-off valve
may be located at the point where the water supply enters the building.
The Package consists of: Butterfly Valve, Test & Drain Valve, Water Flow Indicator
Models:
Size
2.5inch
3 inch
4 inch
6 inch
www.lifeco-uk.com
Model
LF-ZCV/2.5
LF-ZCV/3
LF-ZCV/4
LF-ZCV/6
73
Sprinkler and Accessories
Flexible Sprinkler
Hose With Fittings
Description
Lifeco Flexible sprinkler hose provides a unique sprinkler drop assembly design
which helps save time and cost during installation. The system can be installed
in false ceilings without cutting and threading pipes associated with installing
a drop, arm-over, and elbows.
Lifeco Flexible Sprinkler Hose is installed quickly without large and expensive
tools. Ideal applications include offices, schools, libraries, hospitals, and
shopping complexes.
Available product length:
700, 1000, 1200, 1500, 1800mm
Models:
Slip Nut Type,
Slip Nut Type, Braided,
Weld type, Braided,
Unbraided, LPN-A are
LPB-B to be installed
LPB-W are intended to
intended to be installed
with the S1 and L2
be installed with the S1
with the S1 and L2 or
bracket
and L3 bracket
S2 and L2-2 bracket
LPB-B700-12
LPN-A700-12
LPB-W700-12
LPB-B1000-12
LPN-A1000-12
LPB-W1000-12
LPB-B1200-12
LPN-A1200-12
LPB-W1200-12
LPB-B1500-12
LPN-A1500-12
LPB-W1500-12
LPB-B1800-12
LPN-A1800-12
LPB-W1800-12
LPB-B700-19
LPN-A700-19
—
LPB-B1000-19
LPN-A1000-19
—
LPB-B1200-19
LPN-A1200-19
—
LPB-B1500-19
LPN-A1500-19
—
LPB-B1800-19
LPN-A1800-19
—
74
www.lifeco-uk.com
LIFECO
Extinguishers
Extinguishers
ABC Powder
Extinguisher
Extinguishers
Features
EN3 Kitemark approved by BSI in the UK and CE marked
High fire ratings offering maximum firefighting ability with minimum size and
weight
Nonconductive and safe on electrical equipment and fires
Revolutionary new CE aluminum valve design
Specially designed nozzle for optimum discharge accuracy & time
Available in 1, 2, 3, 4, 6, 9,12 kg and cartridge models and High Performance
versions
Description
BC Powder
Extinguisher
AFFF Foam
Extinguisher
Features
EN3 Kitemark approval by BSI in the UK and CE marked
High fire ratings offering maximum firefighting ability with minimum size and
weight
Revolutionary new CE aluminum valve design
Specially designed nozzle for maximum agitation and the best discharge
accuracy and time
Safe for inadvertent use on electrical items upto 35kv
Suitable for use in a confined spaces
Easy to Empty & refill onsite without mess or special machinery
Available in 3, 6 & 9 Liters, cartridge & High Performance type
ABC Powder works by firstly applying a coating to the fire which acts like a
blanket suffocating the fire. Nitrogen (an inert gas) which is released during
the process assists in suffocating further, while simultaneously tackling the
chemical reaction of the fire, preventing the heat being formed and thereby
cooling the fire.
Description
Models
Models
a
b
c
d
e
f
g
h
i
j
a
b
c
d
e
f
g
h
1 kg ABC powder, stored pressure – LP1D
2 kg ABC powder, stored pressure – LP2D
3 kg ABC powder, stored pressure – LP3D
4 kg ABC powder, stored pressure – LP4D
6 kg ABC powder, stored pressure – LP6D
6 kg ABC powder, stored pressure – LPH6D
9 kg ABC powder, stored pressure – LP9D
12 kg ABC powder, stored pressure – LP12D
6 kg ABC powder, gas cartridge operated – LPC6D
9 kg ABC powder, gas cartridge operated – LPC9D
Aqueous Film Forming Foam (AFFF) works by firstly applying a film forming
foam (bubbles) to the fire which causes a blanket over the fire suffocating the
fire, while almost simultaneously cooling the fire.
3 litre foam (AFFF), stored pressure – LF3D
6 litre foam (AFFF), stored pressure – LF6D
6 litre foam (AFFF), stored pressure – LFH6D
9 litre foam (AFFF), stored pressure – LF9D
6 litre foam (AFFF), gas cartridge operated – LFC6D
6 litre foam (AFFF), gas cartridge operated – LFHC6D
9 litre foam (AFFF), gas cartridge operated – LFC9D
9 litre foam (AFFF), gas cartridge operated – LFHC9D
Features
EN3 Kitemark approval by BSI in the UK and CE marked
Extremely high fire ratings offering maximum firefighting ability for size and
weight
Revolutionary new CE aluminum valve design
Primarily designed for very high risk sites where B & C risk occurs
Specially designed nozzle for maximum discharge distance, accuracy and
time
Available in 4, 6 & 9 Kgs
Description
Specialist BC Powder is primarily a mix of potassium bicarbonate, urea complex
and potassium chloride (is not sodium bicarbonate). The super strength BC
powder is 2-3 times more effective on Class B and C fires than any other agent.
It works by firstly applying a coating to the fire which causes a powder dust
blanket over the fire and during the burning process it releases Carbon Dioxide
which suffocates the fire.
Models
a
b
c
76
4 kg BC powder, stored pressure – LPK4D
6 kg BC powder, stored pressure – LPK6D
9 kg BC powder, stored pressure – LPK9D
www.lifeco-uk.com
www.lifeco-uk.com
77
Extinguishers
Alcohol Resistant
Foam Extinguisher
Extinguishers
Features
EN3 Kitemark approval by BSI in the UK and CE marked
The ONLY kite marked AR foam extinguisher in the world
Primarily designed for Alcohol/Polar fires such as ethanol, methanol,
propanol, acetone
High fire ratings offering maximum firefighting ability
Leaves minimal residue when applied
Revolutionary new CE aluminum valve design
Specially designed micro drop mist nozzle for maximum foam agitation and
the best discharge accuracy and time
Safe for inadvertent use on electrical items up to 35kv
Suitable for use in a confined spaces
Easy to Empty and refill onsite without mess or special filling machinery
Available in 6 & 9 Liters
Wet Chemical
Extinguisher
Wet Chemical uses a film forming base with additional secret chemicals and
micro drop mist nozzle technology. The agent forms a mild foam surface over the
hot oil but not a crust or foam mess like most other agents. The extinguishing is
through smothering initially and cooling through heat absorption through high
volume micro drops and a chemical reaction.
Aqueous Film Forming Foam (AFFF) works by firstly applying a film forming
foam (bubbles) to the fire which causes a blanket over the fire suffocating the
fire, while almost simultaneously cooling the fire. Polar fires often burn with
invisible flames and can NOT be extinguished with conventional AFFF Foam
or agents.
Models
a
b
Models
Features
EN3 Kitemark approval by BSI in the UK and CE marked
Above average fire ratings offering maximum firefighting ability with minimum
size and weight
Revolutionary new CE aluminum valve design
Specially designed nozzle for best discharge application, accuracy and time
Easy to use for untrained operator
Easy to refill onsite
Available in 6 & 9 Ltrs and Anti-freeze
Description
78
3 litre wet chemical, stored pressure – LKF3D
6 litre wet chemical, stored pressure – LKF6D
6 litre foam (polar), stored pressure – LFAR6D
9 litre foam (polar), stored pressure – LFAR9D
Aqua Spray
Extinguisher
Water Extinguisher
EN3 Kitemark approval by BSI in the UK and CE marked
High fire ratings offering maximum firefighting ability with minimum size and
weight
Leaves minimal residue when applied
Revolutionary new CE aluminum valve design
Special applicator lance for safe application to hot oil
Suitable for use in a confined spaces
More reliable and easier to control for an untrained user in a kitchen
Easy to Empty and refill onsite without mess or special filling machinery
Available in 3 & 6 Liters
Description
Description
a
b
Features
Features
EN3 Kitemark approval by BSI in the UK and CE marked
High grade foam agent carrying strong chemical bond to form a strong film
(bubbles) after Fire risks occurs
Revolutionary new CE aluminum valve design
Specially designed nozzle for best discharge application, accuracy and time
More reliable and easier to control for an untrained user
Safe for inadvertent use on electrical items upto 35kv
Suitable for use in a confined spaces
Easy to Empty and refill onsite without mess or special filling machinery
Available in 3 & 6 Ltr
Description
Water extinguishes by cooling the fire and is the simple, conventional and everfaithful extinguishing agent.
Aqua Spray is primarily a wetting agent with some foaming properties. It works
by firstly applying a film to the fire which increases the area to which the water
spreads, thereby providing excellent cooling properties.
Models
Models
a
b
c
d
a
b
6 litre water, stored pressure – LW6SD
9 litre water, stored pressure – LW9SD
9 litre freeze protected water, stored pressure – LW9FSD
9 litre water, gas cartridge operated – LW9CSD
www.lifeco-uk.com
3 litre Aqua spray, stored pressure – LAS3D
6 litre Aqua spray, stored pressure – LAS6D
www.lifeco-uk.com
79
Extinguishers
Carbon Dioxide
Extinguisher
Features
EN3 Kitemark approval by BSI in the UK and CE marked
Suitable for Class B and Electrical Fires
Leaves no residue when applied due to evaporation
Safe for use on electrical items
Available in 2 & 5 Kg
Description
Carbon Dioxide being an inert gas works by expelling the oxygen and thereby
suffocating the fire and is suitable for common industries where small class
B or Electrical risks occur. It is always to be accompanied by a suitable
extinguisher (Foam or Water) to cover class A risks.
Models
a
b
Water Mist
Extinguisher
2 kg carbon dioxide – LC2D
5 kg carbon dioxide – LC5D
Features
EN3 Kitemark approval by BSI in the UK and CE marked
Suited to class A, B Class, C, D (Non oxidizing), E & F Fires (K class in USA)
Leaves almost no residue when applied to fire due to evaporation
Safe for the user due to mist barrier between fire and operator
Safe for use on electrical items upto 100kv. Certified to 35kv
Easy to Empty and refill onsite without mess or special filling machinery
Uses highly advanced technologies in the industry with multiple patents
No collateral damage after discharge
No contamination
Available in 3 & 6 Ltr Stored Pressure
Description
Water Mist is the ONLY extinguisher in the world of its type to be able to
extinguish ALL classes of fire using only water and NO ADDITIVES. The
extinguishing is due to huge cooling effect caused by mist. Mist, created from
water has a droplet size of 50 microns which means 1 billion droplets are
created from 1 Ltr of water, implying a coverage of a total surface area of 200
square meters. While the tiny droplets suffocates the fire by converting to vapor
(an inert gas), simultaneously the dilution of the free radicals also breaks the
chemical chain.
Models
a
b
80
3 litre water mist, stored pressure – LWM3D
6 litre water mist, stored pressure – LWM6D
www.lifeco-uk.com
LIFECO
Cabinets & Accessories
Cabinets & Accessories
Hose Reel Cabinet
Cabinets & Accessories
Features
Manufactured from steel or stainless steel, with thickness of 1mm to 2mm
Hose reel drums pressed on hydraulic press to from ribs for strength and
durability to avoid twisting while handling
Outer edges rolled over for safe handling and aesthetic appearance
Electrostatic powder painted and oven baked to 200⁰C for appearance and
protection from rust
Cabinets of stainless steel also available with hairline or mirror finish
Different styles available- to meet architectural requirements
Semi-Automatic 1.5” hose rack, one piece construction of 16 gauge steel
rack
Automatic release mechanism allows valve to be opened without release of
water until last fold of hose is removed
Description
LIFECO Hose Reel Cabinet is characterized for its high quality and performance
in fighting Fire, can be used effectively in factories, residential building, etc.
Models
a
b
c
d
e
f
g
h
i
j
k
l
82
Single Cabinet - LF 300
Single Cabinet - LF 300A
Single Cabinet - LF 300AS
Single Cabinet - LF 305/20
Single Cabinet - LF 305/30
Single Cabinet - LF 305A
Single Cabinet - LF 305AS
Cabinet + Extinguisher - LF 600
Cabinet + Extinguisher LF 600A
Cabinet + Extinguisher LF 600AS
Double Compartment - LF 900
Double Compartment - LF 900A
www.lifeco-uk.com
Hose Reels
Features
Easy to install
Simple and compact
Light to handle
Automatic or manual operation
Hose available in red or black color
Description
LIFECO hose reels have an extensive range of swinging & fixed type with manual
& automatic operation to suit any architectural and installation requirements.
Hose reel discs are made of 1.2mm pre-treated electrogalvanized steel sheet,
painted with electrostatic powder coating and oven baked at 200°C. Hose
reel side plates are protected with a polyester powder coating that complies
to salt spray test requirement which is specified in ISO 9227 for 240hrs. Hose
reel drum has formation of hydraulically pressed ribs to give extra strength
and to avoid twisting. The outer edges are rolled over to give a safe handling
edge on the outer rims and better appearance. Automatic fire hose reels are
available with an internal valve built into the hose reel unit which opens within
3 revolutions of the hose reel as the hose is pulled out and closes when the
hose is wound back to the reel.
Models
a
b
c
d
e
f
g
h
i
j
k
l
Fire Hose Reel; 19mm fixed manual hose reel – LH19F
Fire Hose Reel; 25mm fixed manual hose reel – LH25F
Fire Hose Reel; 19mm fixed automatic hose reel – LH19AF
Fire Hose Reel; 25mm fixed automatic hose reel – LH25AF
Fire Hose Reel; 19mm swinging pipe manual hose reel – LH19/SP
Fire Hose Reel; 25mm swinging pipe manual hose reel – LH25/SP
Fire Hose Reel; 19mm swinging pipe automatic hose reel – LH19/ASP
Fire Hose Reel; 25mm swinging pipe automatic hose reel – LH25/ASP
Fire Hose Reel; 19mm swinging arm manual hose reel – LH19/SA
Fire Hose Reel; 25mm swinging arm manual hose reel – LH25/SA
Fire Hose Reel; 19mm swinging arm automatic hose reel – LH19/ASA
Fire Hose Reel; 25mm swinging arm automatic hose reel – LH25/ASA
www.lifeco-uk.com
83
Fire Hose & Accessories
Single Jacket and
Double Jacket
Synthetic Fire Hoses
Fire Blankets
Features
Fire Blankets
Heavy duty construction for optimum abrasion resistance
Weather, ozone and ageing resistant with long service life
Easy to repair, clean and maintenance
The breaking strength of the jacket threads meets the requirements of UL 19
The tensile strength and ultimate elongation of inner lining meet the
requirements of UL 19
Hose is designed to withstand 1 ½ times the service pressure without
rupturing or breaking any thread in the jacket as per UL 19
Hose comes with attached couplings, Brass or Chrome Finish as per request
Description
LIFECO UL LISTED Single and Double Jacket Synthetic Fire Hoses are lined with
a high-tech EPDM tube whose engineered design guarantees minimum weight
with maximum durability and flexibility. The polyester construction is mildew
& rot-proof, tough, dependable, light weight and with outstanding abrasion
resistance with our innovative Wisentec coating,
Features
Easy to use
Easy to install
Lightweight
Description
LIFECO Fire blankets are ideal and highly effective for fighting fires involving
flammable liquids such as cooking oils. They can also be used to wrap round
people whose clothing or hair is on fire.
These are manufactured from glass fiber and coated with flame retardant
silicone rubber. They are available in different sizes to suit the requirements.
Models
a
b
c
d
LF-FB/1.0X1.0
LF-FB/1.2X1.2
LF-FB/1.2X1.8
LF-FB/1.8X1.8
The jacket is evenly and firmly woven and free from visible defects, thread
knots, lumps and irregularities of twist. The most common use of these fire
hoses are for exterior fire protection and are also used by Fire Brigades.
Couplings are available in NST or Instantaneous BS336 as per request.
Models Available:
Single Jacket
LF4015SJ
LF4025SJ
Synthetic Hose
Nozzles
Double Jacket
LF4015DJ
LF4025DJ
Features
UL Listed
Available sizes: 1 ½ and 2 ½ inch
Adjustable fog, straight stream and shut off
Finish: Brass and Chrome
Thread: NST
NST to BS336 male adaptor available if required
Nozzle pressure: 100PSI
Discharge GPM as in UL listing
Description
Adjustable nozzle are used for Class A and B fires in most industrial applications.
They are used with lined fire hose. Adjustable fog, straight stream and shut off.
Models Available:
a
b
c
d
84
1-½ ” Adjustable nozzle, 50 GPM – LFNH-40
2-½ ” Adjustable nozzle, 120 GPM – LFNH-65
1-½ ” Adjustable nozzle, 130 GPM – LF-SHN40
2-½ ” Adjustable nozzle, 205 GPM – LF-SHN65
www.lifeco-uk.com
www.lifeco-uk.com
85
Emergency Lights And Exit Lights
Emergency Bulkheads Single Tube
Model No: LF-FL-18A/LF-FL-18B/ LF-FL-18C
LF-FL-18A
LF-FL-18B
LIFECO
Emergency Lights &
Exit Lights
LF-FL-18C
Emergency Bulkheads Double Tube
Features
Suitable for mounting on a normally flammable surface
RED LED indicator indicates battery charging mode
Suitable for indoor use, wall or ceiling mounted
Technical an Environmental
Specification
Operating Mode
Lamp
Supply Voltage
Rated luminaire output
Battery
Battery Life
Operating Temperature
Humidity
Case Material
Flammability
Connection
Non Maintained
T5 8W Fluorescent
110/277 VAC 50/60Hz
3 hours after min. 36Hr Charge
3.6V 4.5Ah Ni-Cd cells
Up to 4 years normal use
-5°C to +45°C
10% to 90% Relative Humidity
Fire Retardant ABS + PC Cover
5VA Housing & V-2 Lens
Screw Terminals
Features
Model No: LF-FL-28A/LF-FL-28B/LF-FL-28C
Suitable for mounting on a normally flammable surface
RED LED indicator indicates battery charging mode
Suitable for indoor use, wall or ceiling mounted
LF-FL-28A
Technical an Environmental
Specification
LF-FL-28B
LF-FL-28C
Operating Mode
Lamp
Supply Voltage
Rated luminaire output
Charge Battery
Battery Life
Operating Temperature
Humidity
Case Material
Flammability
Connection
Non Maintained
2 X T5 8W Fluorescent
110/277 VAC 50/60Hz
3 hours after min. 36Hr
3.6V 4.5Ah Ni-Cd cells
Up to 4 years normal use
-5°C to +45°C
10% to 90% Relative Humidity
Fire Retardant ABS + PC Cover
5VA Housing & V-2 Lens
Screw Terminals
87
Emergency Lights And Exit Lights
Halogen Emergency
Lights - Double Head
Type
Model No: LF-BB-28A/ LF-BB-28B
LF-LE-28A
Emergency Lights And Exit Lights
Features
Suitable for mounting on a normally flammable surface
Battery Discharge Protection
Test Button
RED LED indicator indicates battery charging mode
Suitable for indoor use, wall or ceiling mounted
Technical an Environmental
Specification
LF-LE-28B
88
Operating Mode
Lamp
Supply Voltage
Rated luminaire output
Battery
Battery Life
Operating Temperature
Humidity
Case Material
Flammability
Connection
Color
www.lifeco-uk.com
Non Maintained
2 X 5W/6V Halogen
110/277 VAC 50/60Hz
3 hours after min. 36Hr Charge
6V 4.5Ah Lead Acid cells
upto 4 years normal use
-10°C to +50°C
90% Relative Humidity
Fire Retardant ABS + PC Cover
5VA Housing & V-2 Lens
Screw Terminals
White and Black Available
LED Exit/Emergency
Light Combination
Model No: LF-EEL-R
Features
Single or double face configuration
Two fully adjustable Square shaped light
Long Lasting LED that are operational in normal Condition(AC input) &
emergency (DC input) modes
Test button
Suitable for mounting on a normally flammable surface
RED LED indicator indicates battery charging mode
Replaceable directional arrow inserts are easily removed and reinserted
Battery over discharge protection
Suitable for indoor use, wall or ceiling mounted
Universal mounting
Technical an Environmental
Specification
Operating Mode
Lamp
Supply Voltage
Rated luminaire output
Battery
Battery Life
Operating Temperature
Humidity
Case Material
Connection
Inner Box Packing
Exit Light Color
Color
www.lifeco-uk.com
Non Maintained
2 X 12 pcs LED
110/277 VAC 50/60Hz
3 hours after min. 36Hr Charge
6V 4.5Ah Lead Acid cells
Up to 4 years normal use
-10°C to +50°C
≤ 90% Relative Humidity
Fire Retardant ABS + PC Cover
Screw Terminals
35.5 X 38.9 X 12 cm
Red/Green
White
89
Document page no 93
Emergency Lights And Exit Lights
LED Emergency Exit
Light
Model No: LF-EL-G
Features
Single or double face configuration
Two fully adjustable Square shaped light
Long Lasting LED that are operational in normal Condition(AC input) &
emergency (DC input) modes
Test button
Suitable for mounting on a normally flammable surface
RED LED indicator indicates battery charging mode
Replaceable directional arrow inserts are easily removed and reinserted
Battery over discharge protection
Suitable for indoor use, wall or ceiling mounted
Universal mounting
Technical and Environmental
Specification
Operating Mode
Lamp
Supply Voltage
Rated luminaire output
Battery
Battery Life
Operating Temperature
Humidity
Case Material
Connection
Inner Box Packing
Exit Light Color
Color
90
www.lifeco-uk.com
Non Maintained
12 pcs LED
110/277 VAC 50/60Hz
3 hours after min. 36Hr Charge
4.8V 6.5Ah Ni-Cd cells
Up to 4 years normal use
-10°C to +40°C
90% Relative Humidity
Fire Retardant ABS + PC Cover
Screw Terminals
31.5 X 6 X 22.7 cm
Red/Green
White
Document page no 94
Document page no 95
Document page no 96
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising