Checking Daylight Savings on IT900 Time Clock With Attendance

Checking Daylight Savings on IT900 Time Clock With Attendance
Checking Daylight Savings on IT900 Time Clock
With Attendance Enterprise
IMPORTANT NOTE: The following steps must be completed as soon as possible to
ensure the clock is set to appropriately adjust for the Daylight Savings Time
change occurring on Sunday, November 6, 2016.
Changing DST for the System Date
1. Login to Attendance Enterprise.
2. Click
to launch the Operational Settings window.
3. Click the Daylight Savings tab.
4. Click “Clear List” button to remove all previously defined DST dates. These
dates are defined using either old rules or Build North American Defaults
button.
5. Manually add daylight savings times by right-clicking in the white space and
choosing Add.
1
6. The Daylight Savings Properties window is displayed.
7. Enter the year, the advance date (the day the clocks are moved forward), and
the retard date (the day the clocks are moved back). For 2017, the advance
date is 3/12/2017 and the retard date is 11/5/2017.
8. Click OK to save operational settings.
2
Changing DST on Station Properties
1. Poll the clock from the Task List of the Infotronics software.
2. Open the System Setup folder. Then open the Data Collection folder. Then
open the Stations folder. The clock stations will be listed here.
3. Right mouse click on the first station and select Properties. If the clock type
listed is IT900 128K (Y95.hex), skip the next step (#4). If the clock type is listed
as IT900 512K (G95.hex) or IT900, IT2100 512K (H95.hex) proceed with #4
below.
4. Click on the Terminal Properties button. Change the values in the DS On Week
field to 10 and the value in the DS OFF Week field to 44 per the following
example.
3
5. Click on OK to save these settings. Click on OK again to close the properties
window. Repeat the above steps for any additional IT900 clocks.
6. Perform the following procedure AT THE TIME CLOCK.
7. Swipe the supervisor enable badge. If badge is not available, press the F1 and
F3 keys simultaneously. Type 1905 and press ↵ Enter. (The 1905 will not
appear on the display.)
8. Clock will display something similar to the following:
01/00/1000/00/00/501
12:45/03.03.00/10441
9. (The cursor will be positioned under the first character of the first line. You can
move across these characters by pressing the F1 key to move backward and
the F3 key to move forward.)
4
Referencing the example above, do the following:
A Press the F1 key to move back to the last group of 5 characters on the bottom
line.
B This set of numbers should read 10441. If a number needs to be changed,
move the curser to the incorrect number and press the correct number key one
time.
C Press the ↵ Enter key to return to date and time.
This configuration confirms that the clock’s time will correctly adjust for the change in
time.
Adjusting Shift Parameters for Employees That Work During the Time
Change
1. From the Main Tool Bar, find the Access Class Parameters icon
click once. Enter user logon information.
and
2. From the Infotronics Parameter Profiler, double click on Parameter Classes and
locate Shift Classes. Double click on Shift Classes and all shift classes will
appear below.
3. Click on the first class and then select the Shift Totals tab. The screen below
will appear.
4. Make sure there is a check mark in Adjust shift totals for Daylight Savings. For
Clock time changed by 1:00 at 2:00. Time changes forward on: 3/12/2017. Time
changes back on: 11/5/2017. Make the corrections on the screen. If there is
another Shift Class, make the same changes.
5
5. Click on File then Save. Click File then Exit. You will need to close out of
Attendance Enterprise for the change to take affect.
CALLS TO TECH SUPPORT REGARDING THE ABOVE STEPS IS PROVIDED FREE OF
CHARGE TO CUSTOMERS WITH AN ACTIVE MAINTENANCE AGREEMENT ONLY.
6
Checking Daylight Savings on IT900 Time Clock
IMPORTANT NOTE: The following steps must be completed as soon as possible to
ensure the clock is set to appropriately adjust for the Daylight Savings Time
change occurring on Sunday, November 6, 2017.
Poll the clock from the Task List of the Infotronics software.
Perform the remainder of this procedure at the time clock.
Swipe the supervisor enable badge. If badge is not available, press the F1 and F3 keys
simultaneously. Type 1905 and press ↵ Enter. (The 1905 will not appear on the
display.)
Clock will display something similar to the following:
01/00/1000/00/00/501
12:45/03.03.00/10441
(The cursor will be positioned under the first character of the first line. You can move
across these characters by pressing the F1 key to move backward and the F3 key to
move forward.)
Referencing the example above, do the following:
1. Press the F1 key to move back to the last group of 5 characters on the bottom
line.
2. This set of numbers should read 10441. If a number needs to be changed,
move the curser to the incorrect number and press the correct number key one
time.
3. Press the ↵ Enter key to return to date and time.
This configuration confirms that the clock’s time will correctly adjust for the change in
time.
CALLS TO TECH SUPPORT REGARDING THE ABOVE STEPS IS PROVIDED FREE OF
CHARGE TO CUSTOMERS WITH AN ACTIVE MAINTENANCE AGREEMENT ONLY.
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising