Installation Guide and Users Manual

Installation Guide and Users Manual
Installation Guide
and Users Manual
Professional Series
CXW-298-A09
IMPORTANT:
Read and save these instructions.
NOTICE:
Installer:Leave this guide with the homeowner
Homeowner:Keep this guide for future reference
Under Cabinet/Wall Mount Range Hood
Duro Corporation
17018 Evergreen Place
City Of Industry,CA 91745
Service Tel:1877 639 7264
Product Information:1-888-909-8818
Thank you for purchasing your NXR range hood.We appreciate your business and we recommend that you read this entire user’s manual before
operating your new appliance for the first time.
Warranty
Duro is not responsible for incidental or consequential damages.Under no circumstances will Duro’s liability exceed the cost
that you paid for the product.Some provinces/states do not allow the exclusion or limitation of incidental or consequential
damages,so the above limitation or exclusion may not apply to you.
This manual contains instructions on how to properly install and set up your new range hood,as well as insights into many of the unique features that
our product offers.Please keep this manual for future reference,as it contains the answers to questions that you might have as you begin to cook.
Thank you,
This warranty gives you specific legal rights,and you may also have other rights that wary from state to state.
Duro Corporation
Whenever you call our Customer Service at 1-877-639-7264 for technical information and parts sales in The United States or to
request service for your appliance,please have your complete model number and serial number ready.The model and serial number
can be found on the product data plate.Please enter the information requested in the spaces provided below:
Model No.
Date Purchased
Purchased From
Address
Phone
Serial No.
Date Installed
NOTE:You must provide proof of purchase or installation date for in-warranty service.
24
1
Important Safety Notice
Read all Instructions before Installing and operating this appliance
Warranty
TO OBTAIN SERVICE UNDER WARRANTY:
You must present of original purchase date.
The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background.
Installation and electrical wiring must be done by qualified professionals and in accordance with all appliance codes and standards,
including fire-rated construction.
DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical
and technical background.
Range hood may have very sharp edges;please wear protective gloves if it is necessary to remove any parts for installing,cleaning
or servicing.
Activating any switch ON before completing installation may cause ignition or an explosion.
Due to the size and weight of this range hood,two people installation is recommended.
To reduce the risk of fire,electric shock,or injury to persons:
For general ventilating use only.DO NOT use to exhaust hazardous or explosive materials and vapors.
The combustion air flow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation.Follow the
heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection
Association(NFPA),and the American Society of Heating. Refrigeration and Air Conditioning Engineers(ASHRAE),and the
local code authorities.
Before servicing or cleaning unit, switch power OFF at service panel and lock service panel to prevent power from being
switched ON accidentally.
Clean grease laden surfaces frequently.To reduce the risk of fire and to disperse air properly,make sure to vent air outside.DO
NOT vent exhaust into spaces between walls,crawl spaces,ceiling,attics or garages.
Ducted fan MUST always be vented to the outdoors.
Use only metal ductwork and this unit MUST be grounded.
Sufficient air is needed for proper combustion and exhausting of gases through the duct to prevent back drafting.
When cutting or drilling into wall or ceiling,be careful not to damage electrical wiring or other hidden utilities.
All electrical wiring must be properly installed,insulated and grounded.
Old duct work should be cleaned or replaced if necessary to avoid the possibility of a grease fire.
Check all joints on duct work to insure proper connection and all joints should be properly taped.
Use this unit only in the manner intended by the manufacturer.If you have questions,contact the vendor.
To reduce the risk of a stove top grease fire:
Keep all fan,baffle,spaces,filter,grease tunnel,oil container and grease-laden surfaces clean.Grease should not be allowed to
accumulate on fan,baffle,spaces,filter,grease tunnel and oil container.
Always turn range hood ON when cooking at high heat or when flaming foods.
Use high setting on cooking range only when necessary.
Never leave surface units unattended at high settings.Boil over cause smoking and greasy spillovers that may ignite.Heat oils
slowly on low or medium settings.
Please provide an original dated proof of purchase(sales receipt/invoice)in order to obtain
service under warranty
Manufacture’s Limited Warranty
This Product has been manufactured by Duro Corporation 17018 EVERGREEN PLACE CITY OF INDUSTRY,CA 91745.
Duro Corporation disclaims all express warranties except for the following:
This warranty applies to products purchased and located in the United States.Products purchased or located outside these areas are excluded.
The warranty does not apply to damage resulting from abuse,accident,natural disaster,loss of electrical power to the product for any reason,
alteration,outdoor use,improper installation,improper operation,or repair or service of the product by anyone other than an authorized Duro
Corporation service agency or representative.
Warranties and Duration
Full Warranty for Parts&Labor:1 Year
Implied warranties terminate upon expiration of the limited warranty.Sone states do not allow limitation on how long an implied warranty lasts,
so the above limitation may not apply to your implied warranty.
Duro will pay for:
All repair labor and the cost of replacement parts found to be defective due to materials and workmanship.Service must be provided by a DURO
Authorized Service Agency during normal working hours.For a Service Agency nearest you,please call 1-877-639-7264.
Duro will not pay for:
1.Service by an unauthorized agency.Damage or repairs due to service by an unauthorized agency or use of unauthorized parts.
2.Service visits to:
a.Teach you how to use the appliance.
b.Correct the installation.You are responsible for providing electrical wiring and other connecting facilities.
c.Reset circuit breakers or replace home fuses.
3.The warranty does not apply to damage caused from accident,alteration,misuse,abuse,improper installation or installation not in accordanc
with local electrical codes or plumbing codes,or improper storage of the appliance.
4.The warrany does not apply to repairs other than normal home use.
5.Travel or trip fees and associated charges incurred when the product is installed in a location with limited or restricted access.(i.e.airplan flights,
ferry charges,isolated geographic regions).
The warranty applies to appliances purchased and used by consumers for personal,family,or household purposes only.It does not cover appliances
used in commercial applications.
Should the appliance be sold by the original purchaser during the warranty period,the warranty extends to the new owner until the expiration
date of the expiration date of the original purchaser’s warranty period.
2
23
Important Safety Notice
Maintenance
Read all Instructions before Installing and operating this appliance
SAFETY WARNING:Never put your hand into area housing the fan while the fan is operating!
For optimal operation,clean range hood and all baffle/spacer/filter/grease tunnel/oil container regularly/Regular care will help
preserve the appliance of the range hood.
Cleaning Exterior surfaces:
Clean periodically with hot soapy and clean cotton cloth.DO NOT use corrosive or abrasive detergent,or steel wool/scoring
pads,which will scratch and damage the stainless steel surface.For heavier soil use liquid degrease such as “Forumla 409" or
“Fantastic”brand cleaner.
If hood looks splotchy(stainless steel hood),use a stainless steel cleaner to clean the surface of the hood.Avoid getting cleaning
solution onto or into the control panel.Follow directions of the stainless steel cleaner.CAUTION:DO NOT leave on too long
as this may cause damage to hood finish.Use soft towel to wipe off the cleaning solution,gently rub off any stubborn spots.
Use dry towel to dry the hood.
After cleaning,you may use non abrasive stainless steel polish such as SM or ZEP,to polish and buff out the stainless luster and
grain .Always scrub lightly,with clean cotton cloth,and with the grain.
DO NOT allow deposits to accumulate or remain on the hood.
DO NOT use ordinary steel wool or steel brushes.Small bits of steel may adhere to the surface and cause rusting.
DO NOT allow salt solutions,disinfectants,bleaches,or cleaning compounds to remain in contact with stainless steel for extended
periods.Many of these compounds contain chemicals,which may be harmful.Rings with water exposure and wipe dry with a
clean cloth.
Cleaning Stainless Steel Baffle Filter:
IMPORTANT:Drain oil from baffles,spacers,filters,oil tunnels,oil containers before oil residue overflow!
Remove all baffles,spacers,filters,grease tunnel,and oil containers and discard oil and residue.
Wash with warm soapy water.NOTE:Stainless steel baffles,spacers and oil tunnel are top rack dishwasher safe.
Dry thoroughly before replacing and follow directions for installation in reverse.
Filters should be cleaned after every 30 hours of use.
Clean ventilation fan frequently.
Always use appropriate cookware and utensils size.
Always use cookware appropriate for the size of the surface element.
To reduce the risk of injury to person in the event of a stove top grease fire:
SMOTHER FLAMES with a close-fitting lid,cookie sheet,or metal tray,then turn OFF the burner.BECAREFUL TO PREVENT BURNS.
NEVER PICK UP A FLAMING PAN-you may be burned.KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES.
if the flames DO
NOT go out immediately,EVACUATE AND CALL THE FIRE DEPARTMENT OR 911.
DO NOT USE WATER,including wet dishcloths or towels-a violent steam explosion with result.
Use an extinguisher ONLY if:
You know you have a Class A,B,C extinguisher,and you already know how to operate it.
The fire is small and contained in the area where it is started.
The fire department is being called.
You can fight the fire with your back to an exit.
To reduce the risk of injury to persons in the event of a gas leaks:
Extinguish any open flame.
DO NOT turn on the lights or any type of appliance.
Open all doors and windows to disperse the gas.If you still smell gas,call the gas company and fire department,or 911 immediately.
Your safety and the safety of others is very important.We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety message.All safety messages will tell you what the potential hazard is,tell you how to reduce the chance of
injury,and tell you what can happen if the instructions are not followed.
Replacing the light bulb:
This range hood uses halogen bulb
Make sure the range hood is unplugged or turn OFF breaker.
1.Place a flat-head screwdriver between light cover and housing to remove cover.
2.Gently pull defective bulb straight out and discard.
3.Wear a cotton glove or use a cloth to handle the replacement bulb(DO NOT handle with bare fingers as this may shorten the
life of the bulb).Push gently but securely into light socket.NOTE:DO NOT push too hard as bulb “legs” may break off.
4.Replace light cover.
Turn ON breaker and range hood to rest for operation.
WARNING
This is the safety alert symbol.This symbol alerts you to potential hazards that can hurt you and others.All safety messages will follow the
safety alert symbol and the word “WARNING.”
22
3
Range Hood Assembly:
Parts supplied:
No.
Description
No.
21.1
Bolt
Electrical Box
21.7
21.2
21.6
21.8
Screw
Capacitor
21.4
Processor Board
21.9
Screw
21.5
Electrical Box Cover
Single-piece Chimney
(Optional,sold separately)
Type B
(Connect to typeA)
Length:1-3/10"
Qty:4PCS
(Qty:1PIECE)
Type C(For Hood-mounting Bracket)
Length:3/10"
Qty:8PCS
Type D(For Ducting Transition)
Length:1/2"
(Qty:2PCS)
(Qty:2PCS)
(Qty:1PCS)
4
Electrical Box Base
Screw
21.3
Type A
Length:1-3/5"
Description
21
Range Hood Assembly:
No.
1
2
Description
No.
Hood Casing
Ducting Transtion
10
Description
11
Gasket
Baffle Filter
12
Stainless Steel Spacer
13
5
Screw
Blower Assembly
Oil Tunnel
Baffle Filter Handle
Hood-Mountinf Bracket
6
Panel
15
Switch Assembly
7
16
8
Light Panel
Light
Electrical Assembly
Screws
9
Screws
3
4
14
17
20
Venting Requirements&
Recommendation
Height&Clearance
5
CONTROL BOARD
Calculating Vent System Length
PROCESSOR BOARD
LAMP
N
L
Q
L
M
H
RED
N
BLACK
HALOGEN LIGHT
BLACK
BLUE
YELLOW
RED
FUSE
BLACK
WHITE
WHITE
120V 60Hz
MOTOR
CAPACITOR
20uF/500V
6
19
Venting Methods
Option1:
18
7
Electrical Requirements
8
17
Preparation
Measurements and Diagrams
All measurements in parenthesis are in millimeter.
All inch measurements are converted from millimeters, thus inch measurements are estimated.
With optional single-piece chimney:
(30
5)
18"(457)
56)
(7 )
4" 06
3/ " ( 9
29- - 3/ 4
35
1
1-7
2
-1/
1-1
6
"(3
/4"
(3
1-1
/2
38
"(
)
1
4"
-1/
12
(32
(25
30
)
8"
/2"
5-1
(38
14
/2(
(20
3)
0)
1-1
/3"
(34
)
)
)
)
6-1
/2"
12
(16
"(
30
6)
6)
4-1
"(
(48
2)
1-1
1"
/8"
)
5)
1
3
-1/
4
"(3
)
/2"
( 11
4)
18"(457)
30"(762)
12"(305)
24"(610)
36"(914)
12"
24
"(
61
6)
75 )
" ( 06
/4 (9
- 3 / 4"
9
2 -3
35
0)
16
9
Use and Care Information
Installation
Installations(refer to Page 4 for parts):
1.Measure the distance between stove top and the bottom of range hood.A distance of “27 to 30" is recommended*Due to
difference ceiling height configurations,recommended height may not be applicable.
1.You have two ways(Aor B)to mount this range hood:
A-1.Proceed if you would like to mount this range hood without using the hood-mounting bracket.
A-2.Using references in Height&Clearance on Page 5 and Measurements and Diagrams on Page 16,center the hood beneath the
cabinet and flush with the front of the cabinet.
A-3.From inside of the hood,place screws into the exact center of each knockout hole and secure to cabinet bottom.Finish
Fightening all screws until secure.Be careful when using clectrical screwdriver,damage to the range hood may occur.Skip Part
B below and proceed to Step 2.
CAUTION:Make certain the range hood is secure before releasing!
B-1.Proceed if you would like to mount this range hood using the provided hood-mounting bracket.
B-2.Using references in Height&Clearance on Page 5 and Measurements and Diagrams on Page 17,mark the leveling point of
the hood.Position two mounting screws on the wall,leaving 1/8" space away from the wall.Mounting the hood on wall studs or
lumbars is highly recommended.
B-3.Attach each hood-mounting bracket to the back of the hood with 4 flat head screws as shown in Figure 5.
B-4.Align hood-mounting bracket to the screws on the wall and hook hood into place as shown in Figure 6.Tighten screws to
screws to secure hood to the wall.
CAUTION:Make certain the range hood is secure before releasing!
2.For safety purpose,pre-drilled mounting holes are provided through the back of the hood.For a more secure installation,use
as many mounting holes as needed to secure from the inside of hood.
3.Use 8"round steel pipe(follow building codes in your area) to connect the exhaust on the hood to the duct-work above.Use
silver tape or duct tape to make all joints secure and air tight.Refer to Figure 7.
SAFETY WARNING:Risk of electrical shock.this range hood must be properly grounded.Make sure this is done by
qualified electrician in accordance with all applicable national and local electrical codes.Before connecting wires,switch
power off at service panel and lock service panel to prevent power from being switched on accidentally.
Operations:
Read and understand all instructions and warnings in this manual before operating the appliance.Save these instructions for future reference.
Always leave safety grills and filters in place.Without these components,operating blowers could catch on to hair,finger and loose clothing.
NEVER dispose cigarette ashes,ignitable substances,or any foreign objects into blowers.
NEVER leave cooking unattended.When frying,oil in the pan can easily overheat and catch fire.The risk of self combustion is higher when
the oil has been used several times.
NEVER cook on “open”flames under the range hood.Check deep-fryers during use:Superheated oil may be flammable.
Cleaning:
The saturation of greasy residue in the blower and filters may cause increased inflammability.Keep unit clean and free of grease and
residue built up at all times to prevent possible fires.
Filters must be cleaned periodically and free from accumulation of cooking residue.Old and worn filters must be replaced immediately.
DO NOT operate blowers when filters are removed.Never disassemble parts to clean without proper instructions. Disassembly is
recommended to be performed by qualified personnel only.Read and understand all instructions and warnings in this manual before
proceeding.
Specifications
Specifications
Body Design
Power Rating
General Input Power
Motor Input Power
Stainless Steel,Satin Finish
120V/60Hz(USA&Canada standard)
310W(240W+2X35W)
240W
Ampere
Levels Of Speed Control
Airflow(Q/L/M/H)
Noise Level(Q/L/M/H)
Number Of Motors
10
2.7A
4 Levels
400CFM/600CFM/800CFM/1000CFM
1.4sone(45dB)/3.5sone(58dB)/7.0sone(68dB)/8.0sone(70dB)
Motor Type
Single Motor
Dual Chamber Ultra Quiet
Fan Type
Control Type
Dual Centrifugal Squirrel Cage
Electronic Button Control Panel
Filtration Type
Stainless Steel Baffle Filter
Illumination
Gu10
Venting Size
Top Transition Rectangular to 8 inch Round
15
Troubleshooting
Installation (Continued)
4.
5.
6.
7.
8. Turn power ON in control panel.Check all lights and fan operations.
9. Make sure to leave this Installation Guide for the homeowner.
14
11
Range Hood Operations (Continued)
Range Hood Operations
Control Panel Layout and Buttons Configurations:
Q
I
I
I
I
Increase
Speed
Decrease
Speed
LED Light
Indicator
LED Speed
Indicator
Power Control
(On/Off)
Light Control
During this 3-minutes delay,changing speeds will not affect the countdown.
Immediate Power-off
While the fans are in 3-minute power-off delay mode,press the Power Control(on/Off)button once to turn OFF the fans immediately.
When the fans are operating in normal mode(LED Speed Indicator not flashing),press the Power Control (On/Off)twice to turn OFF the fans.
Light Control:
Light Control button operates independently from the Power Control(On/Off) and power-off delay function.
Pressing the Power Control(On/Off)button or activating the dealy function will not turn halogen lights ON or OFF.CAUTION:DO NOT
touch the lights until switched OFF and cooled.
While the halogen lights are OFF,press the Light Control button once to turn halogen lights on.LED Light indicator will light up.
Touch the Light Control button again will change the light intensity to Low.
Each touch of the Light Control button will cycle the light intensity through High,Low and OFF.
12
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising