drylin® Specialists

drylin® Specialists
drylin®
specialists
drylin® Specialists
Telescopic guides
Measuring systems
Roller guides
Square linear guide
Slide disks
865
drylin®
specialists
drylin® Specialists | Product Overwiew
drylin® NT – Telescopic rails
Lubrication-free solid polymer/aluminum guide for
continuous lengths up to 1,200 mm extension.
page 867
drylin® NT – Telescopic rails with locking mechanism
The proven drylin® N telescopic system is now available
with a locking mechanism.
page 868
There are two different versions:
a) Detent in end and centre positions
b) Precision detent with variable pitch
(minimum pitch 10 mm)
page 866
drylin® WKM – Digital measuring systems
The drylin® WKM measuring systems are battery powered.
The integrated battery has a life of at least two years.
Magnetic tapes fitted as standard. The position value is
displayed on a 5-digit LC display.
page 869
drylin® WKMEX – Measuring system
Much less space is required for the latest drylin® WKMEX
measuring device. The sensor head is integrated in the
carriage (total height 36 mm). There are three sensor
types available, two are compatible with TTL Line Driver.
We recommend igus® E-Chain® series E2 micro or Easy
Chain® for guiding the signal cable.
page 870
drylin® WJRM – Hybrid bearing
An additional drylin® W solution is the combined rolling
and sliding carriage.
In the defined load direction the required drive force is
reduced by the maintenance free roller bearing.
page 872
drylin® Q – Torque-resistant square guide
drylin® Q is the new torque resistant linear slide for the
spacesaving handling of small parts. Four liners made of iglidur® J run on a hard anodized aluminum square tube. This
unit is light weight, compact and 100 % lubrication-free.
page 871
drylin® round slide disk
The drylin® – Slide disks from stock (RSDJ – Round Slide
disk) – made from the high performance material iglidur® J
have many applications. Without additional lubricant, heavy
loads can be moved over a variety of surfaces (steel, aluminum, stainless steel, etc.) with very low friction. The plates
are fixed securely with a screw through the reinforced hole
in the centre.
page 874
866
More information
www.igus.eu/drylinSpecialists
drylin®
specialists
drylin® Telescopic Rails | Product Range
NT-35-“L” – Total extension
Solid polymer guide/aluminum guide
Low weight
Cost-effective
Corrosion-resistant
Continuous lengths up to 1,200 mm (total extension)
NT-35-“L” – Total extension
Order key
C5 = 20–49.5 mm
L
NT-35-300
L
60
C6
C6 = 20–49,5 mm
60
Retracted length L
Rail width: 35 mm
Telescopic-System
C5
NT-35-“L”-“L+20” – Over-extension
Order key
NT-35-300-320
L
20
L
Over extension
(e.g. telescoped length
300 mm, extended
length 620 mm; Over
extension max. 20 mm)
Retracted length L
Rail width: 35 mm
Telescopic-System
NT-35-“L”-“B” – Partial extension
Order key
NT-35-300-200
b
L
b
Partial extension
(e. g. telescoped length
300 mm, extended
length 500 mm)
Retracted length L
Rail width: 35 mm
Telescopic-System
Fmax = 75 N · (200 mm/L)
H
Recommendation:
Fmax calculated using this formula allows an easy manual
use. The unit can take higher forces than this, but the
required driving force will be correspondingly higher.
M4
Dimensions [mm]
Part number
NT-35-… mm
b
H
L min.
L max.
35
19
100
600
igus® GmbH Cologne | Phone +49 (0) 22 03-9649-145 Fax -334 | info@igus.de | www.igus.eu
867
35 35
drylin®
specialists
drylin® Telescopic Rails | Product Range
With locking mechanism
Order key
NT-LM-35-300
C5 = 20–49.5 mm
L mm
C5 = 20–49.5
60 L
60
The proven drylin® N telescopic system is now available
with a locking mechanism.
There are two different versions:
a) Detent in end and centre positions
b) Precision detent with variable pitch
(minimum pitch 10 mm)
Retracted length L
Rail width:L35 mm
L 60
20–49.5 mm Mechanism
C6 = Locking
C5
= 20–49.5 mm
C6 Telescopic-system
60
C5
Solid polymer/aluminum guide
Low weight, quiet running
20
L
Cost-effective
20
L
Corrosion-resistant, 100 % lubrication-free
Continuous lengths up to 1,200 mm
(extended total length)
L
L
C5 = 20–49.5 mm
C5 = 20–49.5Lmm
L L
B B
L
L
60
C6 = 20–49.5 mm L
60
C5
60
C6 = 20–49.5 mm
60
C5
H
L
L
20
L
H
M4
M4
35
20
35
L
LL
Fmax = 75 N · (200 mm/L)
Fmax = 75 N · (200 mm/L)
L
B
L
L
B
L
H
H
M4
M4
Fmax = 75 N · (200 mm/L)
Fmax = 75 N · (200 mm/L)
drylin® NT-LM in adjustment of Perspex guard
drylin® NT-LM in guard door adjustment in machine tool
drylin® – Detent in end and centre position at full extension – Dimensions [mm]
Part number
NT-LM-35-...mm
B
H
Lmin
Lmax
35
19
140
600
individual precision detent on request
delivery 3–8 days
time
prices price list online
868 Lifetime calculation, CAD files and much more support
www.igus.eu/drylinSpecialists
www.igus.eu/drylinSpecialists
drylin®
specialists
drylin® Measuring Systems | Product Range
The drylin® WKM measuring systems are battery powered. The integrated battery guarantees two year operating time.
This means a virtually absolute distance measurement is possible. Magnetic tapes fitted as standard. The position value
is displayed on a 5-digit LC display.
Measuring principle: magnetic with magnetic tape
(10 · 1.4 mm)
Resolution: 0.1 mm
Accuracy: ±(0.1 + 0.01 · measured length [m]) mm
Service life: over 5 years at 100 % switch-on time
Application temperature: +0 to +60 °C
Display: LCD
Repeat accuracy:±1 Digit
Absolute and incremental measuring method
Flexible and mobile use
Variable zero point
Carriage can be clamped
Display optionally right (R) or left (L)
of guide carriage
Max. rail length 4,000 mm
(Effective measurement max. 3,757 mm)
Type series WKM-10 and -20
H
E
For the series 10 and 20 the rails are fixed and the measuring carriage moves.
Part number
WKM-10-80-15-01-L
drylin® linear guide
WK-10-80-15-01*
WKM-10-80-15-01-R
WKM-20-80-15-01-L
WKM-20-80-15-01-R
WK-10-80-15-01*
WK-20-80-15-01*
WK-20-80-15-01*
* Dimensions rail/slide
H
E
36
93
36
93
40
40
93
93
H
E
Dimensions [mm]
drylin® W chapter, page 763
Type series WKM-11
For the series 11, the carriage is fixed with 4 screws. The rail moves, the end of the rail is the fixing point.
Dimensions [mm]
Part number
L
C4
C5
a1
C2
A2
K1
C
A
H
S
Cm
Hm
kz
40
20
18
120
80
8.6
133
73
24
8
100
54
82
max.
WKM-11-40
2,000
igus® GmbH Cologne | Phone +49 (0) 22 03-9649-145 Fax -334 | info@igus.de | www.igus.eu
869
drylin®
specialists
drylin® Measuring Systems | Product Range
Measuring-system with external signal output
Order key
WKMEX-10-80-10-2.5-00-01-1500
01
11
Much less space is required for the latest drylin® WKMEX
measuring device. The sensor head is integrated in the
carriage (total height 36 mm). There are three sensor
types available, two are compatible with TTL Line Driver.
We recommend igus® E-Chain® series E2 micro or Easy
Chain® for guiding the signal cable.
Ready-to-fit measuring device for external signal
output
With 4 edge trigger mode (setting parameters of
the display or control, for example, IW4) and +20 °C
ambient temperature: Resolution:
±(0.025 + 0.02 · L) L = measuring length in metres;
Repeatability: ±0.025 mm
With 1 edge trigger mode (setting parameters of
the display or control, for example, IW1) and +20 °C
ambient temperature: Resolution:
±(0.1 + 0.02 · L) L = measuring length in metres;
Repeatability: ±0.025 mm
Rail length
Number of
complete carriages
Sensor version
in Table
Length of signal cable
(m)
Energychain
045.10.028.0
not included in product
Signal cable
A
A2
K2
Small sensor with integrated evaluation unit
C2
H2
C
Dimensions [mm]
Part number
WKMEX-10-80
H2
C
C2
A
A2
K2
Resolution
36
100
87
107
70
M6
0.1
Versions
Sensor type
00
01
11
delivery from stock
time
Nominal voltage
Output power
Max. length of signal cable
10–30 V
10–30 V
30 m
10–30 V
5V
TTL Line Driver
TTL Line Driver
50 m
10 m
prices price list online
870 Lifetime calculation, CAD files and much more support
www.igus.eu/drylinSpecialists
www.igus.eu/drylinSpecialists
drylin®
specialists
drylin® Q Square Guide | Product Range
Torque-resistant square guide
Order key
QJRMT-05-20
Dimension across flats
Pillow block, short
Tandem (optional)
Metric
Form of Housing,
closed
iglidur® J bearings
Square design
Square section tube made of hard-anodized aluminum
Closed anodized aluminum housing
Torque resistant without 2nd guidance
Tolerates moments up to 10 Nm
Space saving and low weight
Cable guidance possible in tube
Unsupported installation
Lubrication-free
Dimensions [mm]
Part number
Weight
drylin Q rail profile
drylin Q Housing Bearing
®
H
±0. 02
0.55
AWMQ-20
Part number
A
[kg]
®
Weight
A
[kg]
62
H
H1
dQ
Qa
27
Qi
±0.02
E1
E2
±0.15
±0.15
d
L
QJRMT-05-20
0.55
62
27
54
25
20
15
48
55
28
85
QJRM-05-20
0.25
62
27
54
25
20
15
48
55
28
40
Part number
Weight
k
d2
Bf
d
Qa
Qi
d
B
drylin® Q Flange Bearing
[kg]
h7
d3
dt
±0.15
±0.15
QJFMT-02-20
0.24
50
40
11
25
20
15
62
51
28
112
QJFM-02-20
0.14
50
40
11
25
20
15
62
51
28
58
delivery from stock
time
prices price list online
www.igus.eu/drylinSpecialists
igus® GmbH Cologne | Phone +49 (0) 22 03-9649-145 Fax -334 | info@igus.de | www.igus.eu
871
drylin® WJRM Hybrid Bearing | Product Range
C1
Hybrid bearing – roll and slide
C3
A3
drylin®
specialists
G1
drylin® W Hybrid bearings offer a unique combination of plain and roller bearings. At a defined installation
position, the required driving torque reduces significantly due to the maintenance-free roller bearings.
Shear forces and shock loads are absorbed by the plain bearing. The hybrid bearing is ideal for manual
adjustments, especially in door slides.
C1
Shaft-mounted plastic rollers
Liner made of iglidur® J
Low drive force needed, friction: 0.04–0.05 µ
Cost-effective
Can be combined with 7 linear profile rails
G1
WJRM-01-10
WJRM-01-16
WJRM-01-20
H
K2
B
K2
B
B2
WJRM-01-10
WJRM-01-16
WJRM-01-16
WJRM-01-20
WJRM-01-20
Q1
H
Shown installation position is not
possible for combination of WJRM-01-10
with rail WS-10/WS-10-40/WS-10-80
Q2
A1
K3
Q2
B2
WJRM-01-16
WJRM-01-20
A1
K3
A3
C3
drylin® W Housing Bearing, Round – Load Data and Dimensions [mm]
Part number
Static load
capacity Co
Q1
Dyn. load capacity Cz+
at total running distance (km
F·v
10
100
200
max.
[N]
[N]
[N]
[N]
[N · m/s]
WJRM-01-10
250
250
90
50
50
WJRM-01-16
WJRM-01-20
400
550
400
550
140
200
70
100
80
80
drylin® W Housing Bearing – Load Data and Dimensions [mm]
Part number
Friction in Weight
+z direction
B
B2
C1
C3
G1
A3
A1
K2
[g]
K3
Q1
Q2
[N]
WJRM-01-10
< 0.1
46
26
2.5
35
22
27
6.5
16.5
M6
M5
–
–
WJRM-01-16
WJRM-01-20
< 0.1
< 0.1
131
232
34.5
42.5
5
6
48
52
30
34
33
38
9
9
25
30
M8
M8
M6
M6
32
37
28
37
drylin® W guide rail
delivery from stock
time
page 770
prices price list online
872 Lifetime calculation, CAD files and much more support
www.igus.eu/drylinSpecialists
www.igus.eu/drylinSpecialists
drylin® WJRM Hybrid Bearing | Application Examples
drylin®
specialists
Adjustment of control panel unit
Adjustment of sliding door tool magazine
Adjustment of wood panel
Adjustment of camera mounting slide
www.igus.eu/cam
igus® GmbH Cologne | Phone +49 (0) 22 03-9649-145 Fax -334 | info@igus.de | www.igus.eu
873
drylin®
specialists
drylin® Round Slide Disk | Product Range
drylin® round slide disk
Order key
RSDJ-40-06
Thickness
Outer-Ø
iglidur® J
Round slide disk
Da
s
Material:
iglidur® J
K
page 79
The drylin® – slide disks from stock (RSDJ – round slide
disk) – made from the high performance material iglidur® J
have many different applications. Without additional lubricant, heavy loads can be moved over a variety of surfaces
(steel, aluminum, stainless steel, etc.) with very low friction.
The plates are fixed securely with a screw through the reinforced hole in the centre.
Dimensions [mm]
Part number
Outer-Ø
Wear limit
Da
Thickness For countersunk screw Max. static load capacity
s
K
[N]
RSDJ-40-06
40
1.5
6 ± 0.05
M6
28,500
RSDJ-60-08
RSDJ-80-08
60
80
2.5
2.5
8 ± 0.05
8 ± 0.05
M8
M8
66,000
120,000
Please, use our different bar stock dimensions
for your individual design page 547
delivery from stock
time
prices price list online
874 Lifetime calculation, CAD files and much more support
www.igus.eu/drylinSpecialists
www.igus.eu/drylinSpecialists
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising