4ch H.264 DVR Quick Start
Quick Start Guide
1. Packing........................................p2
2. Hard Disk Installation.................p3
3. Front Panel Controls...................p5
4. Rear Panel Connectors...............p6
5. Live Operations...........................p7
6. Playback Operations................p10
4CH H.264 DVR Quick Start Guide V0.3(M02)- p1
1. DVR
2. Quick Start Guide
3. IR Remote Control
4. Battery 2 pcs
5. CD
6. SATA Cord 1 pcs
7. Screw 4 pcs
8. Power Adapter
Note: Standard shipping products do not include HDD
4CH H.264 DVR Quick Start Guide V0.3(M02)- p2
Step 1: Take off the three screws from the bottom of the DVR as
indicated in red circles in the picture below.
p.s. Standard shipping products do not include HDD.
Step 2: Open the cover follow the way the arrows indicate.
Step 3: Fix the HDD to rack mount and connect SATA and the
power cable as indicated.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p3
Step 4: Put DVR bottom up, screw to fix the HDD as indicated.
Step 5: Put the cover back and put the three screws back to fix the
cover in the bottom of the DVR.
NOTE: The initialization of new-installed HDD is required before
recording, please refer to manual “UTILITY SETUP” for detail.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p4
○1 USB 2.0 Port
Port for a USB memory stick or USB external devices
○2 LED Display- Power
DVR power on
○3 LED Display- HDD
HDD data reading
○4 LED Display- LAN
Network connected
○5 LED Display- LOGIN
Remote user login
○6 LED Display- REC
DVR Recording (or Schedule Recording and recording are on)
○7 LED Display- PLAY
DVR Playback
○8 IR Sensor
Input sensor for the remote control
4CH H.264 DVR Quick Start Guide V0.3(M02)- p5
① DC 12V
Socket for a DC 12V input
② MAIN monitor
BNC port for the main monitor
③ VIDEO IN
BNC input ports for cameras, 4 in total
④ AUDIO IN
RCA input port for audio signal
⑤ AUDIO OUT
RCA output for audio signal
⑥ NTSC/PAL Switch
Switch between NTSC/PAL format
⑦ LAN
Network port
⑧ VGA
VGA port
4CH H.264 DVR Quick Start Guide V0.3(M02)- p6
Under LIVE mode, you can watch all channel displays, receive live audio, and operate
display changes.
Table 5-1 Description of the remote control functions under LIVE mode.
Button
Description
REC
Start/Stop recording.
PLAY
Start playing back the most recently recorded segment.
LOCK
Enable/Disable the Keypad function on the front panel, the remote
control and the mouse.
1,2,3,4
Select the channel to monitor in full screen from channel 1 to 4.
FREEZE
Turn on/off screen freeze function.
Switch to quad display.
ENTER/
/MODE
Switch to full screen, quad display.
MENU/
/
Enable/ Disable setup Menu.
BK-UP/
/ESC
Enable/ Disable backup menu.
SRH
Enable/ Disable search menu.
MUTE
Switch channel 1 output audio / turn off LIVE audio
STATUS
Enable/ Disable Status.
OSD
Turn on/off the screen display
ZOOM/ZOOM-
-
Enable/ Disable double screen size display. You can click on the
channel name for choosing a specific channel.
PIP/ ZOOM+
+
Turn on picture-in-picture format. Click on the channel name can
switch to other channels.
AUTO
In AUTO mode, all available channels will be cycled through in full
screen.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p7
Table 5-2 Graphical icons displaying after right-clicking your mouse under LIVE mode.
Icon
Description
Resting the cursor on this icon will bring up the following three menu icons.
Main menu.
Search menu.
Backup menu.
Turn on/off recording.
Playback.
Resting the cursor on this icon will bring up the following five display icons.
FREEZE.
PIP, picture in picture
ZOOM, double the screen size
AUTO-sequence
LOCK, activate the key lock.
Full screen display.
Quad display.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p8
Table 5-3 Description of on screen graphical icons in LIVE mode
Icon
Description
Recording is on
Live Audio is on
Live Audio is off
Motion detected on the channel
Video loss detected on the channel
USB device detected
Connected to the LAN cable.
Film:
:Normal Recording
Clock:
:Schedule Recording
AUTO-seq is on
2X
2X zoom in is on
Freeze is on, screen is frozen
LOCK is on
Shows the current hard disk space has been used
(99% mean used 99%, remain 1%)
Lower right of each CH will show the current time
Icon
Description
/
Image quality (High/Low)
/
Full screen
Record
Snap shot (Photo time in accordance with computer-based)
Record and snap shot file saving path setup
Enable/Disable shortcut toolbar
Under LIVE mode, press PLAY to playback (default setup is quad display.) When the icon
is shown on the screen, the function icons will appear in the right down corner on the screen.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p9
The icon can be dragged by mouse to other location on the screen.
Table 6-1 Remote control functions under the PLAYBACK mode
Icon
Description
ENTER/ MODE Switch to full screen, quad display.
MENU /
Turn on/off PAUSE.
PLAY
Play back at normal speed.
/ SLOW
Play back at slower speed. The speed will be slowed to 1/2, 1/4, 1/8,
1/16 by each pressing of the button till the slowest limitation of 1/16 of
the normal speed. Current playback speed is shown in the upper right
corner.
/
Fast rewind. Each press increases the speed to the next level. There are
six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Fast forward. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Stop playback.
Table 6-2 The mouse operation under the PLAYBACK mode.
Icon
/
Description
「
/
」 Fast rewind
「
/
」Fast forward
Play/pause
「▲
▲
/ SLOW」
,slow playback
「▼
▼ / ■」stop playback
Playback channel by channel with snap shot display
Full screen display
Quad display
Zoom-in display
P.S. If playback of a single channel is wished to be viewed, please double click
on left key of the mouse on the channel video image.
4CH H.264 DVR Quick Start Guide V0.3(M02)- p10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising