High Voltage Power Supplies

High Voltage Power Supplies
NIM
High Voltage Power Supplies
NIM High Voltage Power Supplies are the best choice for small
experiments in which a really low noise feature is expected. CAEN offer a
new generation of NIM Power Supplies that can operate in daisy-chain
network and can be locally or remotely controlled through a dedicated
software. In this way it’s possible to control up to 128 channels and make
of this set-up a complete system.
The NIM Line includes also the NDT power supplies, which are hosted in
a NIM module and can be plugged in NIM crates for power but have also
the chance of Desktop operation thanks to a mains power supply cord.
INDEX
�
Power Supplies
Universal Multichannel System
VME High Voltage Power Supplies
�
Modular Pulse Processing
Electronics
NIM High Voltage Power Supplies
Desktop High Voltage Power Supplies
Spectroscopy Solutions
High Power Low Voltage System
Power Supply Control Software
Educational Kit
Liquid Argon TPC Readout
System
Readout System for Multiplexed
Signals
Digital Detector Emulator
Accessories
• NIM High Voltage Power Supplies
• NDT High Voltage Power Supply Family
NIM High Voltage Power Supplies . . . . . . . . . . . . . . . . . . . . . 46
NDT High Voltage Power Supply Family . . . . . . . . . . . . . . . . 50
46
Power Supplies / NIM High Voltage Power Supplies
CAEN 2014 Product Catalog
q NIM High Voltage Power Supplies
N1419 4/2/1 Channel 500 V/200 μA NIM HV Power Supply Family
The N1419 provides 4 independent High Voltage channels in a single width
NIM mechanics. Two and one channel versions (N1419A and N1419B) are also
available. Each channel can provide a ±500 V / 200 μA max output. The output
polarity is independently selectable for each channel. Channels have common
floating return (common return insulated from the crate ground); HV outputs
are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷50 V/s in 1 V/s steps. The module features 10 nA Iset/Imon resolution. A Zoom option (x 10) is available for Imon,
increasing resolution to 1nA.
Power supply control can be performed either locally, assisted by a graphic
color display or remotely, via USB, RS232 or RS485, the latter allowing to build a
daisy chain network of modules N14XX. It is also controllable via TCP/IP by the
Smart Fan Unit of CAEN NIM8301. A complete set of software tools is available
to control these units, from low level libraries to graphical application software.
For detailed information see the Power Supply Control Software section.
See Reference Table p. 161
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs
from the programmed value by more than 2% of set value (minimum 1 V).
• Programmable VMAX protection limit
• OVERCURRENT detection: if a channel tries to draw a current larger than its
programmed limit, it enters TRIP status, keeping the maximum allowed value
for a programmable time (TRIP), before being switched off
• Common Interlock logic for channels enable/disable and individual inputs
signal for channel Kill function.
Special versions available:
• 2U NIM module with 110 - 240 Vac plug, USB/Ethernet and touch screen display for desktop operation (NDT1419).
See relative section for NIM/desktop modules.
Available options:
• A1480 DC Input Power Equalizer.
• x 10 Imon Zoom, increasing Imon resolution to 1 nA.
Common Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
STANDARD
N1419 - 1419A - N1419B
4/2/1 channels in 1U NIM module
Channel polarity independently selectable
SHV coaxial output connectors
Common floating return
Very Low Ripple
Under/over-voltage alert, overcurrent and max. voltage protection
Daisy-chain capability
Graphic colour display
Local and Remote control
Optional selectable power requirement
Interlock logic for board enable and Individual channel kill
LabVIEW Driver available
Software Tools for remote control
2U/Desktop (with 110-220 Vac) version available
CAEN
CAEN
CA
N
E
OPC Server HV Wrapper
GECO
2 020
For libraries
and application
software, see
p. 57.
N1419 - 500 V Programmable Power Supply Family General Selection Table
N1419 channel features
• ±500 V/200 μA output ranges
• Max Ripple smaller than 5mVpp
• 50 mV Vset/Vmon resolution
• 10nA Iset/Imon resolution (optional
Imon-Zoom: 1 nA)
• Programmable ramp-up / rampdown ((1-50 V/s)
Model
N1419
4
N. of ch.
2
X
N1419B
Code
Form Factor
NIM
NIM/DT
X
N1419A
NDT1419
1
X
X
Interfaces
LOCAL
REMOTE
X
X
X
X
X
X
X
X
X
X
X
X
Description
WN1419XAAAAA
N1419 - 4 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.)
WN1419AXAAAA
N1419A - 2 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.)
WN1419BXAAAA
N1419B - 1 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.)
WPERS0147001
N14XX Customization – Imon Zoom
WA1480XAAAAA
A1480 – DC Power Input Equalizer for N14XX Family
WPERS0147002
N14XX Customization - Internal Common Ground
Power Supplies / NIM High Voltage Power Supplies
CAEN 2014 Product Catalog
47
NIM High Voltage Power Supplies - continued q
N1470
See Reference Table p. 161
4/2/1 Channel 8 kV/3 mA (8 W) NIM HV Power Supply Family
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs
from the programmed value by more than 2% of set value (minimum 10 V).
The N1470 provides 4 independent High Voltage channels in a single width NIM
mechanics. Two and one channel versions (N1470A and N1470B) are also available. Each channel can provide a ±8 kV max voltage, a 3 mA max current and a
9 W max power (8 W max power when output voltage is larger than ±3 kV). The
output polarity is independently selectable for each channel.
• Programmable VMAX protection limit
• OVERCURRENT detection: if a channel tries to draw a current larger than its
programmed limit, it enters TRIP status, keeping the maximum allowed value
for a programmable time (TRIP), before being switched off
Channels have common floating return (common return insulated from the
crate ground); HV outputs are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 50 nA Iset/Imon resolution. A Zoom option (x 10) is available for Imon,
increasing resolution to 5 nA.
• Common Interlock logic for channels enable/disable and individual inputs
signal for channel Kill function.
Special versions available:
• 2U NIM module with 110 - 240 Vac plug, USB/Ethernet and touch screen display for desktop operation (NDT1470).
See relative section for NIM/desktop modules.
Power supply control can be performed either locally, assisted by a graphic
color display or remotely, via USB, RS232 or RS485, the latter allowing to build a
daisy chain network of modules N14XX. It is also controllable via TCP/IP by the
Smart Fan Unit of CAEN NIM8301. A complete set of software tools is available
to control these units, from low level libraries to graphical application software.
For detailed information see the Power Supply Control Software section.
• 2 channels Low Cost version only locally controllable (N1470AL)
• 2 channels Low Cost version only remotely controllable (N1470AR)
Available options:
• A1480 DC Input Power Equalizer.
• x 10 Imon Zoom, increasing Imon resolution to 5 nA.
Common Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4/2/1 channels in 1U NIM module
Channel polarity independently selectable
SHV coaxial output connectors
Common floating return
Very Low Ripple
Under/over-voltage alert, overcurrent and max.
voltage protection
Daisy-chain capability
Graphic colour display
Local and Remote control
Optional selectable power requirement
Interlock logic for board enable and Individual
channel kill
LabVIEW Driver available
Software Tools for remote control
2U/Desktop (with 110-220 Vac) version available
Low cost and 2U/Desktop versions available
CAEN
CAEN
CA
N
E
OPC Server HV Wrapper
GECO
2 020
STANDARD
N1470 - N1470A - N1470B
Low Cost LOCAL
N1470AL
For libraries
and application
software, see
p. 57.
N1470 - 8 kV NIM Programmable Power Supply Family
Model
4
N1470
N. of ch.
2
1
Form Factor
NIM
NIM/DT
X
N1470A
X
X
N1470B
X
NDT1470
Interfaces
LOCAL
REMOTE
X
X
X
X
X
X
X
X
X
X
X
X
N1470AL
LC
X
X
N1470AR
LC
X
X
Code
Low Cost REMOTE
N1470AR
X
Description
WN1470X08AAC
N1470 - 4 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.)
WN1470A08AAC
N1470A - 2 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.)
WN1470B08AAC
N1470B - 1 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.)
WN1470ALCLAA
N1470AL - 2 Ch NIM Low Cost Locally Progammable HV Power Supply (±8kV, 3mA, 50nA res.)
WN1470ALCRAA
N1470AR - 2 Ch NIM Low Cost Remotely Progammable HV Power Supply (±8kV, 3mA, 50nA res.)
WPERS0147001
N14XX Customization – Imon Zoom
WA1480XAAAAA
A1480 – DC Power Input Equalizer for N14XX Family
WPERS0147002
N14XX Customization - Internal Common Ground
X
N1470 channel features
•
•
•
•
±8 kV/3mA output ranges
Very Low Ripple
200 mV Vset/Vmon resolution
50 nA Iset/Imon resolution
(optional Imon-Zoom: 5 nA)
• Programmable ramp-up / rampdown (1-500 V/s)
48
Power Supplies / NIM High Voltage Power Supplies
CAEN 2014 Product Catalog
q NIM High Voltage Power Supplies - continued
N1471 4/2/1 Channel 5.5 kV NIM HV Power Supply High Accuracy Family
See Reference Table p. 161
The Mod. N1471 provides 4 independent High Voltage channels in a single
width NIM mechanics. Two and one channel versions (N1471A and N1471B) are
also available. Each channel can provide a ±5.5 kV / 300 µA output. The output
polarity is independently selectable for each channel.
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs
from the programmed value by more than 2% of set value (minimum 10 V).
Channels have common floating return (common return insulated from the
crate ground); HV outputs are delivered through SHV connectors.
• OVERCURRENT detection: if a channel tries to draw a current larger than its
programmed limit, it enters TRIP status, keeping the maximum allowed value
for a programmable time (TRIP), before being switched off
The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 5 nA Iset/Imon resolution. A Zoom option (x 10) is available for Imon,
increasing resolution to 500 pA.
Power supply control can be performed either locally, assisted by a graphic
color display or remotely, via USB, RS232 or RS485, the latter allowing to build a
daisy chain network of modules N14XX. It is also controllable via TCP/IP by the
Smart Fan Unit of CAEN NIM8301. A complete set of software tools is available
to control these units, from low level libraries to graphical application software.
For detailed information see the Power Supply Control Software section.
• Programmable VMAX protection limit
• Common Interlock logic for channels enable/disable and individual inputs
signal for channel Kill function.
Special versions available:
• 2U NIM module with 220V/110V AC plug for desktop operation (NDT1471).
See relative section for NIM/desktop modules.
•High Resolution models (N1471H/N1471HA/N1471HB e NDT1471H) with 20
µA maximum output and higher current monitor resolution: 1 nA or 50 pA
If Imon Zoom activated (for High Res. Models, Imon-zoom feature is installed
by default).
Available options:
• A1480 DC Input Power Equalizer.
• x 10 Imon Zoom, increasing Imon resolution to 500 pA (N1471x models only).
Common Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
STANDARD
N1471 - N1471A/B - N1471H/HA/HB
4/2/1 channels in 1U NIM module
Channel polarity independently selectable
SHV coaxial output connectors
Common floating return
Very Low Ripple
Under/over-voltage alert, overcurrent and max. voltage protection
Daisy-chain capability
Graphic colour display
Local and Remote control
Optional selectable power requirement
Interlock logic for board enable and Individual channel kill
LabVIEW Driver available
Software Tools for remote control
2U/Desktop (with 110-220 Vac) version available
CAEN
CAEN
•
•
•
•
±5.5 kV/300 μA output ranges
Max Ripple smaller than 10 mVpp
100 mV Vset/Vmon resolution
5 nA Iset/Imon resolution (optional
Imon-Zoom: 500 pA)
• Current offset calibration
• High resolution versions also
available (20 μA max output, Iset/
Imon: 1nA, optional Imon-Zoom: 50
pA)
• Programmable ramp-up / rampdown (1-500 V/s)
N
E
N1471 channel features
CA
OPC Server HV Wrapper
GECO
2 020
For libraries
and application
software, see
p. 57.
N1471 - 5.5 kV NIM Programmable Power Supply High Accuracy Family General Selection Table
Model
N1471
4
N. of ch.
2
X
N1471A
X
N1471B
N1471H
1
X
X
N1471HA
X
N1471HB
X
Form Factor
NIM
NIM/DT
Interfaces
LOCAL
REMOTE
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NDT1471
X
X
X
X
NDT1471H
X
X
X
X
Code
Description
WN1471X05AAC
N1471 - 4 Ch NIM Programmable HV Power Supply (±5.5kV, 300µA, 5nA res.)
WN1471A05AAC
N1471A - 2 Ch NIM Programmable HV Power Supply (±5.5kV, 300µA, 5nA res.)
WN1471B05AAC
N1471B - 1 Ch NIM Programmable HV Power Supply (± 5.5kV, 300µA, 5nA res.)
WN1471HX05AC
N1471H - 4 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.)
WN1471HA05AC
N1471HA - 2 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.)
WN1471HB05AC
N1471HB - 1 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.)
WPERS0147001
N14XX Customization – Imon Zoom
WA1480XAAAAA
A1480 – DC Power Input Equalizer for N14XX Family
WPERS0147002
N14XX Customization - Internal Common Ground
Power Supplies / NIM High Voltage Power Supplies
CAEN 2014 Product Catalog
49
NIM High Voltage Power Supplies - continued q
COMING SOON
See Reference Table p. 161
N1570
2 Channel 15 kV/1 mA (10 W) NIM HV Power Supply Module
The N1570 provides 4 independent High Voltage channels in a double width NIM
mechanics.
Each channel can provide a ±15 kV max voltage, a 1 mA max current and a 10 W
max power.
The output polarity is independently selectable for each channel.
Channels have common floating return (common return insulated from the crate
ground); HV outputs are delivered through Lemo HV connectors.
•
•
•
•
•
The HV output RAMP-UP and RAMP-DOWN rates may be selected independently
for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 20 nA
Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 2 nA.
•
•
•
•
•
Module control can take place either locally thanks to a 2.8” Touchscreen Graphic
color LCD display with a completely redesigned user interface or remotely, via USB
or Ethernet, taking advantage of the new GECO2020 Control Software.
•
•
2 channels in 2U NIM module
Channel polarity independently selectable
LEMO HV coaxial output connectors
Common floating return
Under/over-voltage alert, overcurrent and max.
voltage protection
Daisy-chain capability
2.8” color touch screen display
Local and Remote control (USB2.0/Ethernet)
Optional selectable power requirement
Interlock logic for board enable and Individual
channel kill
LabVIEW Driver available
Software Tools for remote control
Safety features include:
CAEN
N
E
• Programmable VMAX protection limit
CAEN
OPC Server HV Wrapper
CA
•OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs
from the programmed value by more than 2% of set value.
GECO
2 020
For libraries
and application
software, see
pag 57..
• OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a
programmable time (TRIP), before being switched off
• Common Interlock logic for channels enable/disable and individual inputs signal
for channel Kill function.
Available Option:
• A1480 DC Input Power Equalizer.
Code
Description
WN1570XAAAAA
N1570 - 2 Ch NIM Programmable HV Power Supply ( ±15kV, 1mA, 20nA res.)
WA1480XAAAAA
A1480 – DC Power Input Equalizer for N14XX Family
See Reference Table p. 161
The N472 is a double width NIM unit housing 4 independent High Voltage channels.
The output voltages range from 0 to ±3 kV / 3 mA, or up to ±6 kV / 1 mA (max. output
ripple of 30 mVpp at full load).
The output polarity is independently selectable for each channel.
All channels have individual settings and feature test points and connectors for the
monitoring of voltages and currents. The setting of the output voltages can be done
locally, via trimmers located on the front panel, or remotely, via analog signals.
The setting of the output maximum Voltage and Current limit can be done only
locally via front panel trimmers. The channel polarity, overcurrent status and reaching of the VMAX limit are displayed on front panel LEDs.
The High Voltage enable can be set both locally, via front panel switch, and remotely,
via an external TTL level. Each channel can be individually turned on, either locally
or remotely.
The module is intrinsically safe: the High Voltage is present only on the SHV output
connectors.
The module can be powered either by the NIM crate or with 110/220 Vac via a back
panel Standard European connector.
Code
WN472XAAAAAA
Description
N472 - 4 Channel NIM High Voltage Power Supply (± 6 kV 1 mA, ± 3 kV 3 mA)
N472
4 Channel 6 kV Power Supply
• Two output ranges: ±3 kV / 3 mA and ±6
kV / 1 mA
• 4 channels in a double width unit
• Positive or negative polarity selectable for
each channel
• Local or remote individual channel
setting and monitoring
• Remote HV Enable via TTL common to all
channels
• Hardware HV limit
• 110/220 Vac external power available
50
Power Supplies / NIM High Voltage Power Supply / NDT High Voltage Power Supply Family
CAEN 2014 Product Catalog
q NDT High Voltage Power Supply Family
NDT14xx
4 Channel NIM/Desktop HV Power Supply Family
The NDT14xx is a new Power Supply Family providing
4 independent High Voltage channels in both NIM
and Desktop form factor. Desktop operation (110/220
AC Powered) needs no crate and enhance portability.
For all the versions the output polarity is independently selectable for each channel and channels have
common floating return (common return insulated
from the crate ground); HV outputs are delivered
through SHV connectors.
Module control can take place either locally thanks
to a 2.8” Touchscreen Graphic color LCD display with
a completely redesigned user interface or remotely,
via USB or Ethernet, taking advantage of the new
GECO2020 Control Software.
See Reference Table p. 161
An RS485 communication protocol is also available
for daisy chaining up to 32 units.
The different versions span from 500 V to 8 kV and
from 20 µA to 3 mA, meeting the needs of a wide
range of detectors.
Current monitoring can be enhanced thanks to the
Imon Zoom feature, which increase the resolution of
at least a x10 factor.
The HV output RAMP-UP and RAMP-DOWN rates
may be selected independently for each channel in
the range 1÷500 V/s in 1 V/s steps.
Highligths
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 channels in 2U NIM module
110-220 Vac plug for desktop operation
Channel polarity independently selectable
SHV coaxial output connectors
Common floating return
Very Low Ripple
Under/over-voltage alert, overcurrent and max. voltage protection
Daisy-chain capability
2.8” color touch screen display
Local and Remote control (USB2.0/Ethernet)
Optional selectable power requirement
Interlock logic for board enable and Individual channel kill
LabVIEW Driver available
Software Tools for remote control
CAEN
CAEN
CA
E
OPC Server HV Wrapper
N
GECO
2 020
Available models
Model
V Full Scale
Maximum Current Iset/Imon
resolution
NDT1470
8 kV
3 mA
50 nA (5 nA)
NDT1419
500 V
200 μA
5 nA (0.5 nA)
NDT1471
5.5 kV
300 μA
5 nA (0.5 nA)
NDT1471H
5.5 kV
20 μA
1 nA (50 pA)
For libraries
and application
software, see
p. 57.
Safety features include:
•OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage
differs from the programmed value by more than 2% of set value
(minimum 10 V).
Power Supply stand-alone
Ethernet and USB connection
• Programmable VMAX protection limit
•OVERCURRENT detection: if a channel tries to draw a current larger
than its programmed limit, it enters TRIP status, keeping the maximum
allowed value for a programmable time (TRIP), before being switched off
•Common Interlock logic for channels enable/disable and individual
inputs signal for channel Kill function.
Available options:
• A1480 DC Input Power Equalizer.
Touch screen for local control
Code
Description
WNDT1419AAAA
NDT1419 - 4 Ch NIM/Desktop Progammable HV Power Supply (±500V, 200uA, 5nA res.)
WNDT1470AAAA
NDT1470 - 4 Ch NIM/Desktop Progammable HV Power Supply (±8kV, 3mA, 50nA res.)
WNDT1471AAAA
NDT1471 - 4 Ch NIM/Desktop Progammable HV Power Supply (±5.5kV, 300uA, 5nA res.)
WNDT1471HAAA
NDT1471H - 4 Ch NIM/Desktop Progammable High CurrentRes. HV Power Supply (±5.5kV, 20uA, 1nA res.)
WPERS0147002
N14XX Customization - Internal Common Ground
WA1480XAAAAA
A1480 – DC Power Input Equalizer for N14XX Family
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising