CS iKEY: 1 or 2 Door Standalone Controller. ELECTRONIC

CS iKEY: 1 or 2 Door Standalone Controller. ELECTRONIC
CS iKEY: 1 or 2 Door Standalone Controller.
ELECTRONIC RESTRICTED KEY SYSTEM
Pre Programmed and Ready to Install!
General
The CS Technologies iKey access controller is a 1000 user,
one or two-door standalone access control system which
provides high security, easy programming and low-cost.
Each door can have a reader, an exit pushbutton and an
electric release. iKeys are touched to the readers and if
authorised will be given access.
Each iButton is encrypted with:
- Distributor ID.
- Installer ID.
- Site Code
- Key Number (1-1000)
This unique electronic restricted key system protects
your valuable customers as no one else can provide keys
for your sites.
Features
• Easy installation. The system comes with all keys preprogrammed and ready to install.
• Capacity for 1000 iKeys, each individually coded. Keys
can be programmed to either momentary or unlock/relock
functions for one or both doors.
• iKeys can be branded with your company details at no
extra charge (text only).
• Electronic restricted key system (no one else can make or
purchase keys for your customers)
• Programming commands are entered via a low cost
programming keypad and is password protected.
Programming commands include:
- add user (with one of 8 defined access group)
- bulk add users
- set trigger time for each door
• The readers are durable CS Technologies Silicon Key
readers, manufactured from stainless steel. They are
extremely durable and attractive.
• Operates from 12VDC, which can also be used to
power the locks.
•Available also in a proximity card version (iProx).
• 100% Australian made and designed
Specifications
Power supply:
Current consumption:
Temperature range:
Humidity range:
Dimensions:
Shipping weight:
Housing:
Reader interfaces:
Exit requests:
Relay outputs:
Relay trigger time:
Access levels:
12VDC (Regulated)
150mA maximum (not including
door strikes)
0°C to 70°C
0 to 95% relative noncondensing
Box: 148 x 100 x 60mm
Board: 80 x 75 x 20mm
300g
High impact ABS plastic box with
bulkhead mounting lugs
Two Silicon Key (one-wire)
interfaces
Presco keypad interface for
programming
Two normally open inputs for
triggering individual relays
Two ‘relays’ rated at 5A@24VDC
1-31 seconds
Keys can be programmed to pulse
door 1, pulse door 2, toggle door 1
and toggle door 2
Distributed throughout Australia by:
Design &
Manufacture
Re-Programming Commands:
1. Edit Key Access Ability:
1 * (KEY NUMBER) * (ACCESS LEVEL) E
2. Set Relay Trigger Time:
2 * (RELAY NUMBER) * (TRIGGER TIME) E
3. Set Bulk Add Access Level:
3 * (ACCESS LEVEL) * E
4. Bulk add Keys:
4 * (START KEY NUMBER) * (NUMBER OF KEYS) E
Door Reader 1
IN1-4 always off, LK6
0
1
2
3
4
6
8
9
12
Access Level
IN1
White (DATA)
Red (+5V)
+V
Blue (Green LED) LED 1
GND
Black (GND)
I/0 GND
LK1 - ON to set master code and site code
OFF for normal operation
93C66
0V IN2 LED2 +V
THIS WAY UP
0V IN1 LED1 +V
READER 1 READER 2
LK6
IN4
IN3
IN2
IN1
LED3
0V IN3 IN4 +5V
LED2
LED4
1
AT89C4051
GND (Black)
DTA (White)
+12V 0V
Programming Keypad
-
+
LED1
LK1
DATA
LOGGER
21
C2 NO1
C2 NO2
13.8VDC 1 Amp Regulated
Power Supply
Door 1 Exit Button
(Normally Open)
Diodes shown are 1N4001 or similar.
It is good practice to fit a diode across
the coil of any electric lock. (A diode is
included with each silicon key reader)
Door 1 Strike
iKEY CONTROLLER
1 DOOR INSTALLATION GUIDE
Door 1 Trigger
YES
Defining the Future of Access Control
Door 2 Trigger
YES
Door 1 Toggle
YES
YES
Door 2 Toggle
YES
YES
YES
YES
YES
YES
YES
YES
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising