FSP500-50FSPT Datasheet
IPC Power Supply
FSP500-50FSPT (500W)
DESCRIPTION
FSP500-50FSPT
FSP500-50FSPT is a high quality industrial level of switching power
supply. The power supply offers the total power capacity up to 500 Watts,
and employs active PFC and 80+ Platinum design, making it perfect used
in different industrial environments. In addition, with its full range of input
and output electrical features, this power supply is ideally the best choice
for 1U Server, NAS, POS/KIOSK/Digital Signage, Networking and any
other aumotation applications
APPLICATION
Data Center Server, High-end Broadcasting Sever, POS/KIOSK/ Signage,
NAS, Networking and Industrial Server System
FEATURES
Dimension: 81.5 (W) x 40.5(H) x 150.0(L) mm
* 80 Plus Platinum (Efficiency 95% 230VAC)
* Flex ATX Form factor, slim and compact to fit all kinds of servers
SAFETY STANDARD APPROVALS
* Built-in Active PFC function (90-264VAC)
UL 60950
* Resettable power shut down
CFR 47 Part 15 Subpart B
CISPR 22/1997 (Class B)
* Internal 4 cm Fan
0
* 100% burn-in under high ambient temperature (50 C)
TUV EN 60950-1
* Operation up to 5000 meters Altitude
* Over Current Protection (OCP), Over Voltage protection (OVP)
IEC 60950-1
* Short circuit protection on all outputs
* PMBus 1.2 for Digital Power Management
* MTBF: 100K hours at 25oC
GENERAL SPECIFICATIONS
* 100% Hi-pot tested
INPUT SPECIFICATIONS
Efficiency (Module):
Efficiency (Set):
94% @230VAC (Typical Load)
≧ 92% at Max load of 115VAC
Input Range:
90-264 Vac
Signals:
Power good, TTL compatible
Input Frequency:
47-63 Hz
Inrush Current:
40A peak over the entire input voltage range
Input Current:
max. 7.5A @115V / 3.5A @230V
Hold-up Time:
min. 16ms@110Vac
Power Factor:
> 0.98 @115V/60Hz, > 0.94 @230V/50Hz
Output Rise Time:
max. 50ms measured at 10% to 90%
Leakage Current:
max. 3.5mA @ 240Vac/50Hz
PWOK Delay Time:
500ms >PWOK>100ms
MTBF:
The power supply shall have a minimum MTBF at
continuous operation of 200,000 hours calculated at
100%, according to BELL CORE TR-322 at 25°C
excluding the Fan MTBF. At least 100,000 hours
including the fan MTBF.
OUTPUT SPECIFICATIONS
Output Voltage/Current:
see rating chart.
Max. Output Power:
see rating chart.
Ripple & Noise:
+3.3V, +5V, 5VSB: 50mV p-p
EMC Performance:
EN55022, class B Conducted
+12V, -12V: 120mV p-p
EN55022, class B Radiated
Over Voltage Protection:
+3.3V: 3.9V ~ 4.5V / +5V: 5.7V ~ 6.5V
EN61000-3-2, class D
Over Current Protection:
+12V: 13.3V ~ 15.5V
+3.3V: 18A ~ 22A / +5V: 22A ~ 26A
EN61000-3-3
EN61000-4-4, level 3 Perf Criteria B
+12V: 28A ~ 32A
EN61000-4-5, level 3 Pref Criteria B
max. 4% diviation, recovery to within
EN61000-4-6, 10Vrms, Pref Criteria A
Transient Response:
1% in 1mSec for 25% load change
Short Circuit Protection:
Over Temperature Protection:
Over / Undershoot:
Remote On/Off:
No damage, resistance ≦ 0.01Ω
Primary & secondary protection
ENVIRONMENTAL SPECIFICATIONS
with auto recovery
Operating Temperature:
0°C to +50°C
max. 10% at turn on/off
Storage Temperature:
-20°C to +80°C
On = PSON ≦0,8V, low
Relative Operating Humidity:
5% ~ 95% RH, Non-condensing
Off = PSON ≧ 2.0V, high, open
Operating Altitude:
Sea level to 5000m
Vibration Operating:
0.5G (0-peak) acceleration 10~250Hz
sweep at 1 octave/min
OUTPUT RATING CHART
Model Name
FSP500-50FSPT
Output Current
Max.
Output
Watt.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
500W
0,1A
15,0 A
0,1 A
18,0 A
0,1 A
24,0 A
0,1 A
24,0 A
-
-
-
-
-
-
0,05 A
3,0 A
+3.3V
+5V
+12V1
Remark : Max. combined +5V and +3.3V output is limited to total 100W
+12V2
+12V3
-12V
+5VSB
-5V
IPC Power Supply
FSP500-50FSPT (500W)
MECHANICAL SPECIFICATIONS
Connectors
1* ATX 24pin (350mm)
1* EPS12V 8pin CPU (350mm)
1* 6+2pin PCI-E (350mm)
2* 4Pin Molex Power (350/155mm)
4* Sata Power (2*350/155mm)
1* PMBus (50mm)
Dimension: 81.5 (W) x 40.5(H) x 150.0(L) mm
Output
Regulation
Ripple/N
oise
Min
+3,3V
± 5%
50mV
0.1A
15A
+5V
± 5%
50mV
0.1A
18A
+12V1
± 5%
120mV
0.1A
24A
+12V2
± 5%
120mV
0.1A
24A
+5Vsb
± 5%
50mV
0.05A
3A
Max
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising