120 Volt Rackmount Power Strips
96-939/ rev 5e / 12-19-12
120 Volt Rackmount Power Strips
EIA/TIA Compliant
EXCEPTIONAL SUPPORT & PROTECTION™
Rackmount units provide economical 15 and 20 amp
power distribution
PD-915R / PD-915RC-20 / PD-920R-NS / PD-920R / PD-920RC-20
Features
• Available in 15 and 20 amp models
front view
PD-815R-PL
• 8 circuit breaker protected rear outlets
• Enhanced surge protection with no surge diversion to ground
(PD-915, PD-920 and PD-815 Series only)
front view
PD-915R-PL
• Two models available with front outlet and illuminated power
switch or pilot light for status indication
front view
• Choice of finishes available: Black Brushed and Anodized,
Black powder coat
PD-815RA-PL
• Select models available with 20’ power cords
front view
15 amp - rear view
Architects’ and Engineers’ Specifications
EIA compliant 19” Rackmount power strip shall be Middle Atlantic Products model # __ (refer to
2002/95/EC. Rackmount power strip shall be GREENGUARD Indoor Air Quality Certified for
chart), with a __ amp power capacity (refer to chart), differential and common mode surge and
Children and Schools. Rackmount power strip shall be manufactured by an ISO 9001 registered
spike protection (surge and spike protection available on 15 amp power only) and EMI filtering.
company. Rackmount power strip shall be warrantied to be free from defects in materials and
Enhanced surge protection with no surge diversion to ground (PD-915, PD-920 and PD-815 series
workmanship under normal use and conditions for a period of 3 years. Rackmount power
only). Rackmount power strip shall operate on 120 volt AC/60Hz current. Rackmount power strip
distribution unit shall be ETL listed to UL standard 1419, UL 60950-1 and UL 60065 in the US;
shall include __' (refer to chart) SignalSAFE 4/3 power cord with __ plug (refer to chart),
CSA standard 60950-1, and CSA C22.2 No. 60065 in Canada.
™
8 rear outlets (refer to chart), __ front outlet (s)(refer to chart), and __ amp circuit breaker
located on the power strip’s __ (refer to chart). Rackmount power strip shall occupy one
rackspace and be constructed of 18-gauge phosphate pre-treated steel with a __finish (refer
to chart). Rackmount power strip shall comply with the requirements of RoHS EU Directive
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S AVA I L A B L E AT M I D D L E AT L A N T I C . C O M
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
96-939 / rev 5e / 12-19-12 / 115 Volt Rackmount Power Strips
20 amp - rear view
Rackmount Power Strips basic dimensions
All dimensions in inches [Bracketed dimensions are in millimeters]
Middle Atlantic Products
TOP VIEW
8.75
[222]
FRONT VIEW
(PD-815RA-PL)
REAR VIEW
1.75
[44]
(PD-920R-NS, PD-920R, PD-920RC-20)
19.00 [483]
(PD-920R-NS, PD-915R, PD-915RC-20, PD-920R, PD-920RC-20)
(PD-815R-PL)
(PD-815R-PL / PD-815RA-PL)
PD-915R-PL
115 VOLT
(PD-915R-PL)
15 AMP
60 HZ
(PD-915R)
Circuit Breaker
Location
Rear Outlet
Type
Cord
Length
Finish
Rear
NEMA 5-15R
9'
Black Powder Coat
8
Rear
NEMA 5-15R
9'
Black Brushed and Anodized
8
Front
NEMA 5-15R
9'
Black Powder Coat
1
8
Rear
NEMA 5-20R
9'
Black Powder Coat
NEMA 5-15P
1
8
Rear
NEMA 5-15R
9'
Black Brushed and Anodized
NEMA 5-20P
1
8
Front
NEMA 5-20P
9'
Black Powder Coat
20
NEMA 5-20P
1
8
Front
NEMA 5-20P
20'
Black Powder Coat
15
NEMA 5-15P
1
8
Front
NEMA 5-15R
20'
Black Powder Coat
Part #
Amps
Power Cord Type
# Front Outlets # Rear Outlets
PD-815R-PL
15
NEMA 5-15P
0
8
PD-815RA-PL
15
NEMA 5-15P
0
PD-915R
15
NEMA 5-15P
1
PD-920R-NS
20
NEMA 5-20P
PD-915R-PL
15
PD-920R
20
PD-920RC-20
PD-915RC-20
Maximum Derated Load (North America) for 15 Amp Models: 12 Amps
for 20 Amp Models: 16 Amps
Surge Suppression & EMI Filter Specifications (PD-815R-PL / PD-815RA-PL / PD-915R)
• Maximum allowable voltage: 125 VAC (RMS)
- Maximum continuous voltage differential applied between
line and neutral
- Maximum clamping voltage: 395 volts@100 amps
• Peak impulse current (8/20 micro seconds):
- 30,000 amps, one time
- 21,000 amps, two times within 5 minutes
- 9,000 amps, ten times within 2 minutes
- Maximum peak impulse current pulse as defined between
line and neutral
- Maximum multiple impulse current derated per spec
• Response time: Instantaneous (Less than 1 nanosecond)
• EMI/ RF Suppression: More than 20 db
- Calculated line to neutral, 100 KHz to 1 MHz suppression
based upon nominal impedance
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising